permission for starting a bsd server!!

[rec chennai]

dear sir/ma'am,
i have a high speed internet conn 512 now. it will be
1 mbps in a week. i am attaching  my dmesg. i run a
few services as hobby. irc, ftp, shell, http and
radio. 
irc://apnagang.ath.cx 
ftp://noodles:123456@apnagang.ath.cx
shell 61.17.177.29
http://apnagang.ath.cx
radio://apnagang.ath.cx:8001
which i find i am wasting for nothing. so i would like
to have permission to start a mirror in india. i can
serve the fedora images as cdrom images and dvd
images. for my indian friends who are linux & *nix
enthusiast. 
ps. this mail is very informal. i have no clue how to
write a letter. and i am also a novice. but if you
could guide me i can setup a cool bsd server for india
kindly have a look.
thanking you!! 
yours sincerely 
partho


		
__________________________________ 
Discover Yahoo! 
Have fun online with music videos, cool games, IM and more. Check it out! 
http://discover.yahoo.com/online.html
-------------- next part --------------
2
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected SiS 760 chipset
agpgart: Maximum main memory to use for agp memory: 909M
agpgart: AGP aperture is 4M @ 0xe0000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 1
SIS5513: not 100% native mode: will probe irqs later
Probing IDE interface ide0...
hda: ST3200822A, ATA DISK drive
hdb: ST3200822A, ATA DISK drive
Probing IDE interface ide1...
hdc: SONY CD-RW CRX320E, ATAPI CD/DVD-ROM drive
hdd: SONY DVD RW DRU-710A, ATAPI CD/DVD-ROM drive
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4
hdb: max request size: 1024KiB
hdb: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63
hdb: cache flushes supported
 hdb: hdb1 hdb2 hdb3 hdb4
hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 37449)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S3 S4 S5)
ACPI wakeup devices: 
PCI0 PS2K PS2M EUSB  USB USB2 USB3  MAC AC97 MC97 P0P2 
Freeing unused kernel memory: 144k freed
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
spurious 8259A interrupt: IRQ7.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Losing some ticks... checking if CPU frequency changed.
security:  3 users, 4 roles, 316 types, 20 bools
security:  53 classes, 9723 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev hda2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
Losing some ticks... checking if CPU frequency changed.
inserting floppy driver for 2.6.9-11.EL
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 10 (level, low) -> IRQ 10
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 at 0xe400, 00:40:f4:cb:8b:3f, IRQ 10
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 11 (level, low) -> IRQ 11
ip_tables: (C) 2000-2002 Netfilter core team
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
intel8x0_measure_ac97_clock: measured 49557 usecs
intel8x0: clocking to 48000
ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: irq 10, pci mem f8826000
SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: irq 10, pci mem f8828000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 3 (level, low) -> IRQ 3
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: irq 3, pci mem f886a000
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: irq 5, pci mem f88f6000
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ip_tables: (C) 2000-2002 Netfilter core team
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03694e0(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
Losing some ticks... checking if CPU frequency changed.
ip_tables: (C) 2000-2002 Netfilter core team
eth0: no IPv6 routers present
ACPI: Power Button (FF) [PWRF]
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
EXT3 FS on hda2, internal journal
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm at uk.sistina.com
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
ide: failed opcode was 100
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Logical block address out of range -- (asc=0x21, ascq=0x00)
  The failed "Read 10" packet command was: 
  "28 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 0
Buffer I/O error on device hdc, logical block 0
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
ide: failed opcode was 100
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Logical block address out of range -- (asc=0x21, ascq=0x00)
  The failed "Read 10" packet command was: 
  "28 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 0
Buffer I/O error on device hdc, logical block 0
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
ide: failed opcode was 100
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Logical block address out of range -- (asc=0x21, ascq=0x00)
  The failed "Read 10" packet command was: 
  "28 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 0
cdrom: open failed.
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
ide: failed opcode was 100
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Logical block address out of range -- (asc=0x21, ascq=0x00)
  The failed "Read 10" packet command was: 
  "28 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 0
SELinux: initialized (dev hdb1, type vfat), uses genfs_contexts
SELinux: initialized (dev hdb2, type vfat), uses genfs_contexts
SELinux: initialized (dev hdb3, type vfat), uses genfs_contexts
SELinux: initialized (dev hdb4, type vfat), uses genfs_contexts
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda4, type ext3), uses xattr
Adding 2096472k swap on /dev/hda3.  Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing some ticks... checking if CPU frequency changed.
Losing too many ticks!
TSC cannot be used as a timesource.  
Possible reasons for this are:
  You're running with Speedstep,
  You don't have DMA enabled for your hard disk (see hdparm),
  Incorrect TSC synchronization on an SMP system (see dmesg).
Falling back to a sane timesource now.
parport0: PC-style at 0x378 [PCSPP]
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (7934 buckets, 63472 max) - 356 bytes per conntrack
audit(1118412962.251:0): avc:  denied  { search } for  pid=2256 comm=syslogd name=nscd dev=hda2 ino=424366 scontext=user_u:system_r:syslogd_t tcontext=system_u:object_r:nscd_var_run_t tclass=dir
audit(1118412962.251:0): avc:  denied  { search } for  pid=2256 comm=syslogd name=nscd dev=hda2 ino=424366 scontext=user_u:system_r:syslogd_t tcontext=system_u:object_r:nscd_var_run_t tclass=dir
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
i2c /dev entries driver
parport0: PC-style at 0x378 [PCSPP]
lp0: using parport0 (polling).
lp0: console ready
audit(1118415949.369:0): avc:  denied  { search } for  pid=2947 comm=mysqld name=nscd dev=hda2 ino=424366 scontext=user_u:system_r:mysqld_t tcontext=system_u:object_r:nscd_var_run_t tclass=dir
audit(1118415949.369:0): avc:  denied  { search } for  pid=2947 comm=mysqld name=nscd dev=hda2 ino=424366 scontext=user_u:system_r:mysqld_t tcontext=system_u:object_r:nscd_var_run_t tclass=dir
audit(1118415949.369:0): avc:  denied  { search } for  pid=2947 comm=mysqld name=nscd dev=hda2 ino=424366 scontext=user_u:system_r:mysqld_t tcontext=system_u:object_r:nscd_var_run_t tclass=dir
audit(1118415949.369:0): avc:  denied  { search } for  pid=2947 comm=mysqld name=nscd dev=hda2 ino=424366 scontext=user_u:system_r:mysqld_t tcontext=system_u:object_r:nscd_var_run_t tclass=dir
cdrom: hdc: mrw address space DMA selected
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev hdc, type iso9660), uses genfs_contexts
cdrom: hdc: mrw address space DMA selected
loop: loaded (max 8 devices)
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev loop0, type iso9660), uses genfs_contexts
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev loop0, type iso9660), uses genfs_contexts
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev loop1, type iso9660), uses genfs_contexts
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev loop1, type iso9660), uses genfs_contexts
audit(1118421656.055:0): avc:  denied  { search } for  pid=5322 comm=mysqld name=nscd dev=hda2 ino=424366 scontext=user_u:system_r:mysqld_t tcontext=system_u:object_r:nscd_var_run_t tclass=dir
audit(1118421656.055:0): avc:  denied  { search } for  pid=5322 comm=mysqld name=nscd dev=hda2 ino=424366 scontext=user_u:system_r:mysqld_t tcontext=system_u:object_r:nscd_var_run_t tclass=dir
application xmms uses obsolete OSS audio interface
application firefox-bin uses obsolete OSS audio interface
application xmms uses obsolete OSS audio interface
application mplayer uses obsolete OSS audio interface
application xmms uses obsolete OSS audio interface
application firefox-bin uses obsolete OSS audio interface
application xmms uses obsolete OSS audio interface