ssh delays 40 seconds
Robert Marella
rmarella at gmail.com
Sun Jun 5 22:34:24 GMT 2005
A little nudge is needed. All of a sudden, my attempts to ssh any of the
other computers in my SOHO take 40 seconds before I am prompted for a
password or pass-phrase. At that time I can log in and all is well. It
is consistent in all directions.
I have made NO changes to ssh or any other config file. I don't believe
it is dns because I can ping and connect quickly to inside and outside
locations using x.x.x.x or www.blah.org from all computers.
I have attached the output of ssh -vvv with comments as to were the
delay occurs. I need some help or direction as to what it all means.
I thank you
Robert
P.S I have also attached a network map.
-------------- next part --------------
[frankie] ~> ssh -vvv gateway
OpenSSH_3.8.1p1 FreeBSD-20040419, OpenSSL 0.9.7e 25 Oct 2004
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to gateway [10.0.0.1] port 22.
debug1: Connection established.
debug1: identity file /home/robert/.ssh/identity type -1
debug3: Not a RSA1 key file /home/robert/.ssh/id_rsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: missing keytype
debug2: key_type_from_name: unknown key type 'Proc-Type:'
debug3: key_read: missing keytype
debug2: key_type_from_name: unknown key type 'DEK-Info:'
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: missing keytype
debug1: identity file /home/robert/.ssh/id_rsa type 1
debug1: identity file /home/robert/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_3.8.1p1 FreeBSD-20040419
debug1: match: OpenSSH_3.8.1p1 FreeBSD-20040419 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.8.1p1 FreeBSD-20040419
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-dss,ssh-rsa
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 129/256
debug2: bits set: 519/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: check_host_in_hostfile: filename /home/robert/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 1
debug1: Host 'gateway' is known and matches the DSA host key.
debug1: Found key in /home/robert/.ssh/known_hosts:1
debug2: bits set: 505/1024
debug1: ssh_dss_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/robert/.ssh/identity (0x0)
debug2: key: /home/robert/.ssh/id_rsa (0x806f4d0)
debug2: key: /home/robert/.ssh/id_dsa (0x0)
#################################
40 second delay is right here!
#################################
debug1: Authentications that can continue: publickey
debug3: start over, passed a different list publickey
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/robert/.ssh/identity
debug3: no such identity: /home/robert/.ssh/identity
debug1: Offering public key: /home/robert/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Server accepts key: pkalg ssh-rsa blen 149
debug2: input_userauth_pk_ok: fp 7d:24:8c:24:07:95:3f:87:ca:9f:83:14:fb:3d:e8:76
debug3: sign_and_send_pubkey
debug1: PEM_read_PrivateKey failed
debug1: read PEM private key done: type <unknown>
Enter passphrase for key '/home/robert/.ssh/id_rsa':
-------------- next part --------------
em1 ________________________________________ em0
192.168.1.1| "GATEWAY" gateway/firewall/ntpd serv |DHCP
________| Celeron 266MHz 384 MB RAM |_________
| |________________________________________| |
| | aue0 |
________|__ (((o))) | 10.0.0.1 _______|_________
| Linksys | | | | Cable Modem |
| BEFW-154 |_______| | | Road Runner |
|___WAP_____|192.168.1.100 | |_________________|
________|__________________________________
| HUB |
|___________________________________________|
| | |
| | |
________________ ((o)) | | | __________________
|"HP" Pavillion | | | | | |"P4" ASUS MOBO |
|Celeron N5310 | | | | | |P4P800E Pent 4 |
|750MHz 256MB RAM|________| | | |______|2.6GHz 1GB RAM |
| |ndis0 | | sk0|NFS Server |
|________________|192.168.1.104 | | 10.0.0.103|__________________|
| |
| |
_________________ ((o)) | | __________________
|"T2590" Toshiba | | | | |"SCSI" Mercury |
|2590CDT Celeron | | | | |KOB 630E MOBO |
|400MHz 192MB RAM|________| | |________________|VIA C3 650MHz CPU |
| |wi0 | rl0|686 512MB RAM |
|________________|192.168.1.110 | 10.0.0.102|__________________|
|
|
________________ ((o)) | __________________
|"NCR" KU440EX | | | |"FRANKIE" Pent III|
|Celeron 266 MHz | | | |Mach Speed 694TAS |
|384 MB RAM |________| |__________________________|1.1GHz 1.5GB RAM |
| |wi0 rl0|NFS-Server |
|________________|192.168.1.106 10.0.0.101|__________________|
More information about the freebsd-questions
mailing list