ppp filling /var

[Dmitry Mityugov]

On 6/2/05, James <james at idea-anvil.net> wrote:
> Forgot to include this:
> 
> FreeBSD 4.11-RELEASE-p2 #3
> 
> # cat ppp.conf:
> 
> default:
>         set device PPPoE:ed0
>         set speed sync
>         set mru 1492
>         set mtu 1492
>         set ctsrts on
>         #enable dns
>         enable lqr
>         set log phase tun
>         add default HISADDR
> dsl:
>         set authname ****************
>         set authkey ******************
> 
> 
> # cat ppp.linkup
> MYADDR:
>         !bg /sbin/natd -f /etc/natd.conf
> 
> #cat natd.conf
> interface tun0
> log yes
> use_sockets yes
> same_ports yes
> redirect_port udp 10.0.0.10:53 53
> redirect_port tcp 10.0.0.101:22 22
> redirect_port tcp 10.0.0.101:25 25
> redirect_port tcp 10.0.0.101:80 80
> redirect_port tcp 10.0.0.101:110 110
> redirect_port tcp 10.0.0.101:443 443
> redirect_port tcp 10.0.0.101:587 587

Not sure if this even possible but if nobody else gives a better idea
- can't this be caused by natd, or the way you start it from
ppp.linkup? Can you use nat embetted in ppp instead?

-- 
Dmitry

"We live less by imagination than despite it" - Rockwell Kent, "N by E"