5.3 .. acd0: WARNING - READ_TOC read data overrun 12>0

Sat Jan 29 21:13:42 PST 2005

Greetings,

This is the first time I really tried to do anything with the atapi CD since
installing 5.3.  Note that on 5.2.1 I was able to read and write cds on this
drive without incident.  I sent you my kernel config in a previous msg.  Here's
the dmesg output..

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #3: Sat Jan 29 21:17:19 UTC 2005
    randy at arabian.astrolab.org:/usr/src/sys/i386/compile/ARABIAN-SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Overdrive Pentium II/Pentium II Xeon/Celeron (332.39-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x1632  Stepping = 2
  Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 369098752 (352 MB)
avail memory = 355692544 (339 MB)
MPTable: <INTEL    440FX       >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
de0: <Digital 21040 Ethernet> port 0xe480-0xe4ff mem 0xfebfdf80-0xfebfdfff irq 15 at device 17.0 on pci0
de0: [GIANT-LOCKED]
de0: SMC 8432BT 21040 [10Mb/s] pass 2.3
de0: Ethernet address: 00:00:c0:85:9a:0d
de0: if_start running deferred for Giant
pci0: <display, VGA> at device 18.0 (no driver attached)
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xe800-0xe8ff mem 0xfebfe000-0xfebfefff irq 9 at device 19.0 on pci0
ahc0: [GIANT-LOCKED]
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
atapci1: <Promise PDC20269 UDMA133 controller> port 0xef90-0xef9f,0xefe0-0xefe3,0xefa8-0xefaf,0xefe4-0xefe7,0xeff0-0xeff7 mem 0xfebf8000-0xfebfbfff irq 10 at device 20.0 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
cpu0 on motherboard
cpu1 on motherboard
orm0: <ISA Option ROMs> at iomem 0xce800-0xcefff,0xcc000-0xce7ff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sbc0: <Creative SB AWE64> at port 0x388-0x38b,0x330-0x331,0x220-0x22f irq 5 drq 5,1 on isa0
sbc0: [GIANT-LOCKED]
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding disabled, default to deny, logging limited to 100 packets/entry by default
ad4: 78167MB <Maxtor 6Y080L0/YAR41VW0> [158816/16/63] at ata2-master UDMA133
acd0: CDRW <HL-DT-ST GCE-8481B/1.10> at ata3-master PIO4
Waiting 5 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <TOSHIBA CD-ROM XM-6201TA 1030> Removable CD-ROM SCSI-2 device 
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad4s2a
de0: autosense failed: cable problem?
acd0: WARNING - READ_TOC read data overrun 12>0
acd0: WARNING - READ_TOC read data overrun 12>0
acd0: WARNING - READ_TOC read data overrun 12>0
acd0: WARNING - READ_TOC read data overrun 20>0
acd0: WARNING - READ_TOC read data overrun 8>0
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x21 ascq=0x00 error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x21 ascq=0x00 error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x21 ascq=0x00 error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x21 ascq=0x00 error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x21 ascq=0x00 error=4<ABORTED>
sio1: 1 more silo overflow (total 1)

--
Randall D. DuCharme (Radio AD5GB)

Powered by FreeBSD!
The Power to Serve

 --- On Sat 01/29, Jason Henson < jason at ec.rr.com > wrote:
From: Jason Henson [mailto: jason at ec.rr.com]
To: freebsd-questions at freebsd.org
Date: Sun, 30 Jan 2005 04:59:28 +0000
Subject: Re: 5.3 .. acd0: WARNING - READ_TOC read data overrun 12>0

On 01/29/05 18:40:26, ad5gb wrote: > > Greetings, > > I have discovered more problems with atapi stuff on my system. Tried > to mount a > cd using my IDE CD and the system responded with... > > acd0: WARNING - READ_TOC read data overrun 12>0 > acd0: WARNING - READ_TOC read data overrun 20>0 > acd0: WARNING - READ_TOC read data overrun 8>0 > acd0: TIMEOUT - READ_BIG retrying (2 retries left) > acd0: FAILURE - READ_BIG timed out > acd0: WARNING - READ_TOC read data overrun 12>0 > acd0: WARNING - READ_TOC read data overrun 20>0 > acd0: WARNING - READ_TOC read data overrun 8>0 > acd0: TIMEOUT - READ_BIG retrying (2 retries left) > acd0: FAILURE - READ_BIG timed out > acd0: TIMEOUT - READ_BIG retrying (2 retries left) > acd0: FAILURE - READ_BIG timed out > > I first added hw.ata.atapi_dma="0 to /boot/loader.conf but it didn't > help. I > then added hw.ata.ata_dma="0" and tried again. If I leave the disc > in > the > drive and reboot it reports: > > acd0: WARNING - READ_TOC read data overrun 12>0 > > acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x21 ascq=0x00 > error=4<ABORTED> > SMP: AP CPU #1 Launched! > > Between this and the atapicam problem I found a couple days ago, I'm > totally > stumped. > > Any ideas? > > Have you tried any other cds? Is this the first time with that cdrom, has it worked before, or is it new? What version of FreeBSD are you running and when was it built? A dmesg and kernel config? Did you here anything from Søren Schmidt <sos at DeepCore.dk>. He is the ata guru. _______________________________________________ freebsd-questions at freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"

_______________________________________________
No banners. No pop-ups. No kidding.
Make My Way your home on the Web - http://www.myway.com