Problem with burning CD-DAs
stevan.tiefert at freenet.de
Thu Dec 1 07:46:22 PST 2005
Am Donnerstag, 1. Dezember 2005 14:25 schrieb Fabian Keil:
> Stevan Tiefert <stevan.tiefert at freenet.de> wrote:
> > Fabian Keil schrieb:
> > > Stevan Tiefert <stevan.tiefert at freenet.de> wrote:
> > >>Fabian Keil schrieb:
> > >>>Stevan Tiefert <stevan.tiefert at freenet.de> wrote:
> > >>>>I can rip without problems a CD-DA to a wav-file (cdda2wav). I
> > >>>>played this file in a wav-player without problems. When I burn
> > >>>>these wav-files with cdrecord to a CD-R and then play this CD-R
> > >>>>on a CD-Player I hear the songs but with a disturbing rushing! No
> > >>>>klicks! I hear the song with a rush like a storm! All
> > >>>>Audio-Tracks, the whole CD, rushing!
> > >>>
> > >>>Did you check with readcd -c2scan if the burned disc is c2 error
> > >>>free?
> > >>>
> > >>>If you rip the burned disc with cdda2wav -paranoia, do you get any
> > >>>suspicious error messages? Do the ripped wavs still have the
> > >>>problems you described?
> > >>
> > >>When I run:
> > >>readcd dev=3,0,0 -c2scan
> > >>it finish his work without hard read errors.
> > >
> > > It should finish without any errors.
> > >
> > >>With:
> > >>cdda2wav -v255 -D3,0,0 -B -Owav -paranoia
> > >>I got 60 % korrekt read *.wav-files the others have minor problems,
> > >>rereads and so on...
> > >
> > > That is bad as well.
> > >
> > >>When I cdrecord the ONLY GOOD *.wav-files I got the same effect
> > >>like before! I hear together with my songs a storm!!! It seems to
> > >>be only the write process is not correct working!
> > >
> > > Please post the output of cdrecord dev=3,0,0 -atip,
> > > and the last four lines of the c2scan.
> > Second, the output of "cdrecord -atip dev=1,0,0":
> > Cdrecord-Clone 2.01 (i386-unknown-freebsd5.4) Copyright (C) 1995-2004
> > Jörg Schilling
> > scsidev: ´1,0,0´
> > scsibus: 1 target: 0 lun: 0
> > Using libscg version ´schily-0.8´.
> > Device type: Removable CD-ROM
> > Version: 0
> > Response Format: 1
> > Vendor_info: ´LG ´
> > Identifikation: ´CD-RW CED-8080B ´
> > Revision: ´1.06´
> > Manufacturer: CMC Magnetics Corporation
> > Third, the output of "readcd dev=1,0,0 -c2scan":
> > Read speed: 5645 kB/s (CD 32x, DVD 4x).
> > Write speed: 1411 kB/s (CD 8x, DVD 1x).
> > Capacity: 198010 Blocks = 396020 kBytes = 386 MBytes = 405 prMB
> > Sectorsize: 2048 Bytes
> > Copy from SCSI (1,0,0) disk to file ´/dev/null´
> > end: 198010
> > addr: 198010 cnt: 10
> > Time total: 225.993sec
> > Read 511654.75 kB at 2264.0 kB/sec.
> > Total of 0 hard read errors.
> > C2 errors total: 0 bytes in 0 sectors on disk
> > C2 errors rate: 0.000000%
> > C2 errors on worst sector: 0, sectors with 100+ C2 errors: 0
> If you try cdda2wav -B dev=1,0,0 -paranoia, do you get
> as bad results as with 3,0,0?
> What is the result of readcd dev=3,0,0 -c2scan?
When I used dev=3,0,0 the CD-RW was connected on a PCI-EIDE-Host-Adapter. I
thought that the chipset of my mainboard don't support any correct writing of
CD-DAs. But the EIDE-Controller of the mainboard and the Host-Adapter do have
both the same results... dev=1,0,0 is the same CD-RW connected on the
More information about the freebsd-questions