freebsd-questions Digest, Vol 81, Issue 20
Tejaswy Appalla
tejaswytej at gmail.com
Fri Nov 26 23:03:08 PST 2004
welll i am having trouble with installation of free bsd 5.3
here is the error
"unable o write data ad0"
"vty1 dma limited to udma33"1
"ad0:failure-read _dma timed out non ata66 cable or device "
so plz help me out
even when i tried to install free bsd 5.1 i got an error
"read_dma interupt was seen but taskqueue time out LBA 78165297"
"read_dma interupt was seen but taskqueue Satted LBA 78165297"
any help will be appreciated
On Fri, 26 Nov 2004 17:05:39 +0000 (GMT),
freebsd-questions-request at freebsd.org
<freebsd-questions-request at freebsd.org> wrote:
> Send freebsd-questions mailing list submissions to
> freebsd-questions at freebsd.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> or, via email, send a message with subject or body 'help' to
> freebsd-questions-request at freebsd.org
>
> You can reach the person managing the list at
> freebsd-questions-owner at freebsd.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of freebsd-questions digest..."
>
> Today's Topics:
>
> 1. Running commands at startup (Danny Browne)
> 2. Diskgeometry - sysinstall bug? (Erik Norgaard)
> 3. Re: Playing DVD movies with Xine (Graham Bentley)
> 4. Re: WRITE_DMA failures on 5.3 (but NOT on 4.10) (Peter Risdon)
> 5. Re: WRITE_DMA failures on 5.3 (but NOT on 4.10) (Peter Risdon)
> 6. Re: Running commands at startup (Ion-Mihai Tetcu)
> 7. Re: squid-downloads (David Landgren)
> 8. Updating packages list (using cvsup?) (Olaf Greve)
> 9. Re: How to boot FreeBSD from a slave IDE disk (Joshua Lokken)
> 10. RE: Updating packages list (using cvsup?)
> (Thomas S. Crum - AAA Web Solution, Inc.)
> 11. RE: Updating packages list (using cvsup?) (Olaf Greve)
> 12. Re: kernel compile error (Joshua Lokken)
> 13. Re: kernel compile error (Brian Bobowski)
> 14. Re: Updating packages list (using cvsup?) (Rob)
> 15. Re: Error in ghostscript (Doug Van Allen)
> 16. Re: kernel compile error (Gert Cuykens)
> 17. Best driver setup for GeForce2 MX (Adam Maloney)
> 18. Re: Restarting rc.conf (Ruben de Groot)
> 19. Re: kernel compile error (Dick Davies)
> 20. Re: Updating packages list (using cvsup?) (RW)
> 21. Re[2]: WRITE_DMA failures on 5.3 (but NOT on 4.10) (DanGer)
> 22. Re: Playing DVD movies with Xine (RL)
> 23. Re: WRITE_DMA failures on 5.3 (but NOT on 4.10) (Peter Risdon)
> 24. Re: Playing DVD movies with Xine (RW)
> 25. loading ndis at boot ? (FreeBsdBeni)
> 26. Re: shell programming challenge (Don Wilde)
> 27. Re: Best driver setup for GeForce2 MX (Kees Plonsz)
> 28. eject DAT tape via command? (Matthias F. Brandstetter)
> 29. Re: eject DAT tape via command? (Martin Hepworth)
> 30. Re: eject DAT tape via command? (lists)
> 31. Re: eject DAT tape via command? (Gary Hayers)
> 32. Re: eject DAT tape via command? (Matthias F. Brandstetter)
> 33. Re: Xorg/Modes issue (Jake Stride)
> 34. Re: Running commands at startup (Adam Fabian)
> 35. How to get best results from FreeBSD-questions (Greg Lehey)
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 26 Nov 2004 12:04:14 +0000
> From: "Danny Browne" <danny_browne at eircom.net>
> Subject: Running commands at startup
> To: "FreeBSD Mailing List" <freebsd-questions at freebsd.org>
> Message-ID: <20041126120415.F260043D5D at mx1.FreeBSD.org>
> Content-Type: text/plain; charset=us-ascii
>
> This will probobly seem like such a basic question, but where can do i put commands i want to run at startup.
>
> freeBSD 4.10
>
> i want to run (for example)
>
> alias 'ls=ls -G'
> alias 'vi=vim'
> alias 'shutdown=shutdown -h now'
> etc...
>
> Also, i am running fluxbox, but my mouse is very slow when it starts up. at the moment i have to enter xset m 5/1 in the terminal to speed it up. How can i get fluxbox do do this at startup?
>
> ____________________________________________________________
> Danny Browne
>
> _________________________________________________________________
> Sign up for eircom broadband now and get a free two month trial.*
> Phone 1850 73 00 73 or visit http://home.eircom.net/broadbandoffer
>
> ------------------------------
>
> Message: 2
> Date: Fri, 26 Nov 2004 13:17:47 +0100
> From: Erik Norgaard <norgaard at locolomo.org>
> Subject: Diskgeometry - sysinstall bug?
> To: "freebsd-questions at freebsd.org" <freebsd-questions at freebsd.org>
> Message-ID: <41A71EEB.4090301 at locolomo.org>
> Content-Type: text/plain; charset=us-ascii; format=flowed
>
> Hi,
>
> I have problems making sysinstall behave, interactive or scripted. The
> disk is 60GB Hitachi Travelstar, on boot the kernel FreeBSD 5.3-STABLE
> identifies the geometry as: 116280/16/63, but sysinstall refuses these
> values as insane, and tries to rewrite the disk geometry to 7296/255/63.
>
> Using all disk for slice 1 sysinstall writes the disklabel, but it fails
> to initialize the swap partition claming no such device /dev/ad0s1b, or
> I get write errors when I try to install.
>
> On reboot (pxe), even though the new partition table and geometry was
> written, the kernel identifies the disk with the original geometry. It
> appears that I should go with the geometry the kernel thinks.
>
> How do I get my disk sliced up from here?
>
> Thanks, Erik
>
> I have found the following code in disks.c which seems to be responsible:
>
> if (d->bios_cyl > 65536 || d->bios_hd > 256 || d->bios_sect >= 64) {
> Sanitize_Bios_Geom(d);
> }
>
> I have previously had FreeBSD 4.10 on the disk, installed from CD with
> no problems. On my laptop (40GB), the disk geometry is 77520/16/63
> which should also fail in the above check I have 6.0-CURRENT, installed
> originally as 5.2.1 but upgraded with cvsup.
>
> Running fdisk manually, I get the following output:
>
> parameters extracted from in-core disklabel are:
> cylinders=116280 heads=16 sectors/tracks=63 (1008 blks/cyl)
>
> Figures below won't work with BIOS for partions not in cyl 1
> parameters to be used for BIOS calculations are
> cylinders=116280 heads=16 sectors/tracks=63 (1008 blks/cyl)
>
> Information from DOS bootblock is:
> 1: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
> start 63, size 117210177 (57231 Meg), flag 80 (active)
> beg: cyl 0/ head 1/ sector 1;
> end: cyl 567/ head 15/ sector 63
> 2: <UNUSED>
> 3: <UNUSED>
> 4: <UNUSED>
>
> Confirming to write disk, fdisk prints the following summary:
>
> /dev/ad0: 116280 cyl 16 hd 63 sec
> Part Start Size Type Flags
> 1 63 117210177 0xa5 0x80
>
> This all looks OK, just like the kernel likes it...
>
> --
> Ph: +34.666334818 web: www.locolomo.org
> S/MIME Certificate: http://www.locolomo.org/crt/2004071206.crt
> Subject ID: A9:76:7A:ED:06:95:2B:8D:48:97:CE:F2:3F:42:C8:F2:22:DE:4C:B9
> Fingerprint: 4A:E8:63:38:46:F6:9A:5D:B4:DC:29:41:3F:62:D3:0A:73:25:67:C2
>
> ------------------------------
>
> Message: 3
> Date: Fri, 26 Nov 2004 12:30:02 +0000
> From: Graham Bentley <gbentley at uk2.net>
> Subject: Re: Playing DVD movies with Xine
> To: freebsd-questions at freebsd.org
> Message-ID: <3.0.6.32.20041126123002.007c4290 at mail.uk2.net>
> Content-Type: text/plain; charset="us-ascii"
>
> I had to do this before Xine would recognise my DVD's
>
> ln -s /dev/acd0 /dev/dvd
> ln -s /dev/acd0 /dev/rdvd
>
> Check these :-
>
> http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/video-playback.html
> http://www.onlamp.com/pub/a/bsd/2002/10/03/FreeBSD_Basics.html
>
> Custom PC North West
> Open Source Solutions
> http://www.cpcnw.co.uk
>
> ------------------------------
>
> Message: 4
> Date: Fri, 26 Nov 2004 12:46:58 +0000
> From: Peter Risdon <peter at circlesquared.com>
> Subject: Re: WRITE_DMA failures on 5.3 (but NOT on 4.10)
> To: craig at small-pla.net
> Cc: freebsd-questions at freebsd.org
> Message-ID: <41A725C2.30204 at circlesquared.com>
> Content-Type: text/plain; charset=us-ascii; format=flowed
>
> craig wrote:
> > hi,
> >
> > i wrote about this issue some weeks back, but have still not yet adequately
> > resolved it.
> > (http://lists.freebsd.org/mailman/htdig/freebsd-questions/2004-November/0638
> > 07.html)
> [...]
> > to repeat the original problem, when installing 5.3R it fails about 12% into
> > extracting base into \
> > on the emergency terminal, there is a stream of warnings and failures
> > reading:
> >
> > WARNING : WRITE_DMA UDMA ICRC ERROR <LBA..... blah
> > FAILURE : WRITE_DMA status = 51<Ready, DSC, error>... blah
> >
> > this continues until i run out of patience.
>
> This is a really major problem that has affected every 5.3 and the more
> recent 5.2.1 machines I've operated with largish [1] hard drives. The
> novelty of losing several tens of gigs of data any time a drive gets
> busy wears off fairly quickly.
>
> >
> > the advice i received was :
>
> ... mainly about checking hardware, and this is _not_ the issue. I've
> googled extensively on this and, as you did, replaced every hardware
> component in the IDE lines, including the disk drives, without affecting
> the problem.
>
> So far as I can make out, there was a change to default settings at some
> point (I haven't scoured the CVS repository to find out exactly when) to
> enable DMA because some newer drives require this[2].
>
> This also affects some attempts to install from CD using CDRW/DVD drives[3].
>
> The only answer seems to be to disable DMA and I hope to put together a
> test machine in the next week to experiment with this. So far as I can
> see, there's a chance that adding:
>
> hw.ata.ata_dma="0"
>
> to /boot/loader.conf might help but I haven't yet tried this.
>
> Peter.
>
> [1] - at least >80G but I'm not sure where it kicks in.
>
> [2] -
> http://unix.derkeiler.com/Mailing-Lists/FreeBSD/current/2004-11/0078.html
>
> [3] - http://adam.kungfoohampster.com/lists/freebsd-stable/msg09493.shtml
>
> --
>
> the circle squared
>
> network systems and software
>
> http://www.circlesquared.com
>
> ------------------------------
>
> Message: 5
> Date: Fri, 26 Nov 2004 13:04:33 +0000
> From: Peter Risdon <peter at circlesquared.com>
> Subject: Re: WRITE_DMA failures on 5.3 (but NOT on 4.10)
> To: craig at small-pla.net
> Cc: freebsd-questions at freebsd.org
> Message-ID: <41A729E1.1060505 at circlesquared.com>
> Content-Type: text/plain; charset=us-ascii; format=flowed
>
> Peter Risdon wrote:
> > craig wrote:
> >
> >> hi,
> >>
> >> i wrote about this issue some weeks back, but have still not yet
> >> adequately
> >> resolved it.
> >> (http://lists.freebsd.org/mailman/htdig/freebsd-questions/2004-November/0638
> >>
> >> 07.html)
> >
> > [...]
> >
> >> to repeat the original problem, when installing 5.3R it fails about
> >> 12% into
> >> extracting base into \
> >> on the emergency terminal, there is a stream of warnings and failures
> >> reading:
> >>
> >> WARNING : WRITE_DMA UDMA ICRC ERROR <LBA..... blah
> >> FAILURE : WRITE_DMA status = 51<Ready, DSC, error>... blah
> >> this continues until i run out of patience.
> >
> >
> > This is a really major problem that has affected every 5.3 and the more
> > recent 5.2.1 machines I've operated with largish [1] hard drives. The
> > novelty of losing several tens of gigs of data any time a drive gets
> > busy wears off fairly quickly.
> >
> >>
> >> the advice i received was :
> >
> >
> > ... mainly about checking hardware, and this is _not_ the issue. I've
> > googled extensively on this and, as you did, replaced every hardware
> > component in the IDE lines, including the disk drives, without affecting
> > the problem.
> >
> > So far as I can make out, there was a change to default settings at some
> > point (I haven't scoured the CVS repository to find out exactly when) to
> > enable DMA because some newer drives require this[2].
> >
>
> No - apologies for wasting bandwidth. I got to this stage of research
> very late a couple of nights ago and see I should have stopped a few
> hours earlier. Looking again, this:
>
> hw.ata.atapi_dma: 0
>
> in loader.conf might fix the problem with atapi drives but the
>
> hw.ata.ata_dma: 1
>
> sysctl setting seems to have been the default in 4.10 too, so that can't
> be it.
>
> I think I might try turning off ata dma in a 5.3 system anyway, and
> putting a big drive under load to see what happens, but I fear I'm
> probably back to square one.
>
> Peter.
>
> --
>
> the circle squared
>
> network systems and software
>
> http://www.circlesquared.com
>
> ------------------------------
>
> Message: 6
> Date: Fri, 26 Nov 2004 15:23:30 +0200
> From: Ion-Mihai Tetcu <itetcu at apropo.ro>
> Subject: Re: Running commands at startup
> To: danny_browne at eircom.net
> Cc: FreeBSD Mailing List <freebsd-questions at freebsd.org>
> Message-ID: <20041126152330.02968099 at it.buh.tecnik93.com>
> Content-Type: text/plain; charset=US-ASCII
>
> On Fri, 26 Nov 2004 12:04:14 +0000
> "Danny Browne" <danny_browne at eircom.net> wrote:
>
> >
> > This will probobly seem like such a basic question, but where can do i
> > put commands i want to run at startup.
>
> for example cron, see @reboot
>
> > freeBSD 4.10
> >
> > i want to run (for example)
> >
> > alias 'ls=ls -G'
> > alias 'vi=vim'
> > alias 'shutdown=shutdown -h now'
> > etc...
>
> This are a different problem
> see:
>
> /etc/csh.*
> ~/.cshrc
> ~/.login
>
> --
> IOnut
> Unregistered ;) FreeBSD "user"
>
> ------------------------------
>
> Message: 7
> Date: Fri, 26 Nov 2004 14:37:38 +0100
> From: David Landgren <david at landgren.net>
> Subject: Re: squid-downloads
> To: questions at freebsd.org
> Message-ID: <41A731A2.1000309 at landgren.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> metallarch wrote:
> >--
> >How can i deny downloads from squid?
>
> Here's a novel idea, how about reading the documentation?
>
> http://www.squid-cache.org/Doc/FAQ/FAQ-10.html
>
> ------------------------------
>
> Message: 8
> Date: Fri, 26 Nov 2004 14:45:14 +0100
> From: "Olaf Greve" <o.greve at axis.nl>
> Subject: Updating packages list (using cvsup?)
> To: <freebsd-questions at freebsd.org>
> Message-ID: <005501c4d3be$2865be60$1e01a8c0 at sjees>
> Content-Type: text/plain; charset="us-ascii"
>
> Hi all,
>
> I was wondering about a thingy.
>
> Whenever I use sysinstall to add a package, the list seems to be
> constantly the same (i.e. often outdated), whereas more recent versions
> should be available of several of the packages. Of course I can manually
> d/l the packages and if necessary compile them and install them, but I
> have also heard of the possibility of using cvsup to automatically
> update the packages tree.
>
> Now, I have installed cvsup, and I quickly browsed over the man pages (I
> have to admit that I have not yet been able to spend much time on this),
> but I was wondering if this is really the best way to go. Sure, it does
> automatically update collections, etc., but is this really the handiest
> tool out there for this particular task?
>
> If not, can anyone please name me an alternative (approach)?
> If it is, OTOH, can anyone please give me some quick pointers for
> setting this up correctly, and/or point me to a page where this process
> is explained.
>
> Thanks in advance, and cheers!
> Olafo
>
> ------------------------------
>
> Message: 9
> Date: Fri, 26 Nov 2004 07:55:21 -0600
> From: Joshua Lokken <joshua.lokken at gmail.com>
> Subject: Re: How to boot FreeBSD from a slave IDE disk
> To: rain cip <raincip at yahoo.com>
> Cc: freebsd-questions at freebsd.org
> Message-ID: <bc5b638504112605551d5afde at mail.gmail.com>
> Content-Type: text/plain; charset=US-ASCII
>
> On Thu, 25 Nov 2004 20:26:38 -0800 (PST), rain cip <raincip at yahoo.com> wrote:
> > Hello,
> >
> > I hope I can get some help from this list to figure out how to boot FreeBSD from a slave drive. My PC has two disks. The sysinstall sees both: ad0 and ad3. My hardware configuration is such:
> >
> > ad0 -- primary IDE, master (all for Win2k)
> > ad3 -- secondary IDE, slave (all for FreeBSD 5.3)
> >
> >
> >
> >
> > I know I must have done something wrong. But what did I do wrong?
>
> I'm not sure. I know that I use a tool called GAG to boot mutliple
> OSes from assorted locations, and it has always worked very well for
> me.
>
> http://gag.sourceforge.net/
>
> HTH,
>
> --
> Joshua Lokken
> Open Source Advocate
>
> ------------------------------
>
> Message: 10
> Date: Fri, 26 Nov 2004 09:08:59 -0500
> From: "Thomas S. Crum - AAA Web Solution, Inc."
> <tscrum at aaawebsolution.com>
> Subject: RE: Updating packages list (using cvsup?)
> To: "'Olaf Greve'" <o.greve at axis.nl>, <freebsd-questions at freebsd.org>
> Message-ID: <003d01c4d3c1$7d1eb5d0$0200a8c0 at wolf>
> Content-Type: text/plain; charset="us-ascii"
>
> Packages are pre-compiled so there is little ability to configure them,
> should you need to. Although I still know many people who prefer using
> packages. Do not use sysinstall to accomplish this. Also, there is no need
> to 'download or update' your 'packages'. Simply follow the below command to
> install the current package.
>
> # pkg_add -r some_package
>
> I would recommend ports and cvs to anyone.
>
> Below is a config to install cvsup and run it to update your ports
> collection. Remember though, ports are not precompiled and you will
> actually need to move into the /usr/ports/whatever_port/whatever_program dir
> to install them.
>
> # pkg_add -r cvsup-without-gui
> # cp /usr/share/examples/cvsup/ports-supfile /root/ports-supfile
> // change 'changethis' to cvsup2, cvsup3, etc.
> # ee /root/ports-supfile
> // REBOOT SERVER
> # shutdown -r now
> // Run CVsup to make ports current. (will take approx. 1 hour over
> broadband)
> # cvsup -g -L 2 /root/ports-supfile
>
> Also there is a wealth of information in the FreeBSD handbook and I would
> consider giving that a read.
>
> Best,
>
> Thomas S. Crum
>
> -----Original Message-----
> From: owner-freebsd-questions at freebsd.org
> [mailto:owner-freebsd-questions at freebsd.org] On Behalf Of Olaf Greve
> Sent: Friday, November 26, 2004 8:45 AM
> To: freebsd-questions at freebsd.org
> Subject: Updating packages list (using cvsup?)
>
> Hi all,
>
> I was wondering about a thingy.
>
> Whenever I use sysinstall to add a package, the list seems to be
> constantly the same (i.e. often outdated), whereas more recent versions
> should be available of several of the packages. Of course I can manually
> d/l the packages and if necessary compile them and install them, but I
> have also heard of the possibility of using cvsup to automatically
> update the packages tree.
>
> Now, I have installed cvsup, and I quickly browsed over the man pages (I
> have to admit that I have not yet been able to spend much time on this),
> but I was wondering if this is really the best way to go. Sure, it does
> automatically update collections, etc., but is this really the handiest
> tool out there for this particular task?
>
> If not, can anyone please name me an alternative (approach)?
> If it is, OTOH, can anyone please give me some quick pointers for
> setting this up correctly, and/or point me to a page where this process
> is explained.
>
> Thanks in advance, and cheers!
> Olafo
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
>
> ------------------------------
>
> Message: 11
> Date: Fri, 26 Nov 2004 15:22:20 +0100
> From: "Olaf Greve" <o.greve at axis.nl>
> Subject: RE: Updating packages list (using cvsup?)
> To: "'Thomas S. Crum - AAA Web Solution, Inc.'"
> <tscrum at aaawebsolution.com>, <freebsd-questions at freebsd.org>
> Message-ID: <005d01c4d3c3$57404610$1e01a8c0 at sjees>
> Content-Type: text/plain; charset="us-ascii"
>
> Hi Thomas (and others),
>
> First off: thanks a lot for your answer, this is indeed what I was
> looking for... Then some specifics:
>
> > Packages are pre-compiled so there is little ability to configure
> them,
> > should you need to. Although I still know many people who prefer using
> > packages.
>
> I find them handy at times, but indeed some of them are hopelessly
> outdated (like Clamd)...:)
>
> > Do not use sysinstall to accomplish this. Also, there is no need to
> 'download or
> > update' your 'packages'. Simply follow the below command to install
> the current package.
>
> I know. I didn't express myself correctly: what I meant to say was to
> update the tree of 'packages', but then, as you stated, what I actually
> should have been referring to is the tree of 'ports'. :P
>
> > Below is a config to install cvsup and run it to update your ports
> > collection. Remember though, ports are not precompiled and you will
> > actually need to move into the
> /usr/ports/whatever_port/whatever_program dir
> > to install them.
>
> Yes, that's fine thanks!
>
> So the below should do the trick.
>
> > # pkg_add -r cvsup-without-gui
> > # cp /usr/share/examples/cvsup/ports-supfile /root/ports-supfile
> > // change 'changethis' to cvsup2, cvsup3, etc.
> > # ee /root/ports-supfile
> > // REBOOT SERVER
> > # shutdown -r now
> > // Run CVsup to make ports current. (will take approx. 1 hour over
> > broadband)
> > # cvsup -g -L 2 /root/ports-supfile
>
> Cool. Sounds easy enough. So I guess if I were to schedule the 'cvsup -g
> -L 2 /root/ports-supfile' command using cron, a weekly task should do.
>
> > Also there is a wealth of information in the FreeBSD handbook and I
> would
> > consider giving that a read.
>
> Thanks, indeed I have printed that (for the 5.1 version, but that should
> be o.k.) and I shall check that out as well...
>
> Cheers!
> Olafo
>
> ------------------------------
>
> Message: 12
> Date: Fri, 26 Nov 2004 08:27:49 -0600
> From: Joshua Lokken <joshua.lokken at gmail.com>
> Subject: Re: kernel compile error
> To: Kris Kennaway <kris at obsecurity.org>
> Cc: Rob <spamrefuse at yahoo.com>
> Message-ID: <bc5b638504112606273f80a71 at mail.gmail.com>
> Content-Type: text/plain; charset=US-ASCII
>
> > On Fri, Nov 26, 2004 at 04:03:52PM +0900, Rob wrote:
> > > Matt Emmerton wrote:
> > > >>/usr/src/sys/pci/if_rl.c:122:23: miibus_if.h: No such file or directory
> > > >>mkdep: compile failed
> > > >
> > > >
> > > >You need "device miibus" in your kernel config if you want to use "device
> > > >rl".
> > > Having such a mechanism, would prevent lots of beginners in the
> > > kernel compiling stuff, to get frustrated with errors like above.
>
> Also, as you see, it's well-documented in the kernel config file ;)
>
> --
> Joshua Lokken
> Open Source Advocate
>
> ------------------------------
>
> Message: 13
> Date: Fri, 26 Nov 2004 09:32:08 -0500
> From: Brian Bobowski <bbobowski at cogeco.ca>
> Subject: Re: kernel compile error
> To: Joshua Lokken <joshua.lokken at gmail.com>
> Cc: Rob <spamrefuse at yahoo.com>
> Message-ID: <41A73E68.9020509 at cogeco.ca>
> Content-Type: text/plain; charset=us-ascii; format=flowed
>
> Joshua Lokken wrote:
>
> >>On Fri, Nov 26, 2004 at 04:03:52PM +0900, Rob wrote:
> >>
> >>
> >>>Matt Emmerton wrote:
> >>>
> >>>
> >>>Having such a mechanism, would prevent lots of beginners in the
> >>>kernel compiling stuff, to get frustrated with errors like above.
> >>>
> >>>
> >Also, as you see, it's well-documented in the kernel config file ;)
> >
> >
> While this is true, it's also easy enough for someone to snip the
> directions when slicing things out of the config file. Assuming that the
> user won't do things the wrong way is a sure way to succumb to Murphy's
> Law(the real one).
>
> The main barrier I can see to this is getting whatever parses the config
> file to recognise such dependencies; as it is, it's the compiler that
> runs into the problem, not the program that calls the compiler. The
> compiler doesn't know where the relevant source is if not told to
> include it, after all.
>
> -BB
>
> ------------------------------
>
> Message: 14
> Date: Fri, 26 Nov 2004 23:23:30 +0900
> From: Rob <spamrefuse at yahoo.com>
> Subject: Re: Updating packages list (using cvsup?)
> To: FreeBSD <freebsd-questions at freebsd.org>
> Message-ID: <41A73C62.2090609 at yahoo.com>
> Content-Type: text/plain; charset=us-ascii; format=flowed
>
> Thomas S. Crum - AAA Web Solution, Inc. wrote:
> > Packages are pre-compiled so there is little ability to configure them,
> > should you need to. Although I still know many people who prefer using
> > packages. Do not use sysinstall to accomplish this. Also, there is no need
> > to 'download or update' your 'packages'. Simply follow the below command to
> > install the current package.
> >
> > # pkg_add -r some_package
> >
> > I would recommend ports and cvs to anyone.
> >
> > Below is a config to install cvsup and run it to update your ports
> > collection. Remember though, ports are not precompiled and you will
> > actually need to move into the /usr/ports/whatever_port/whatever_program dir
> > to install them.
> >
> > # pkg_add -r cvsup-without-gui
> > # cp /usr/share/examples/cvsup/ports-supfile /root/ports-supfile
>
> Or forget about making a copy, and do directly:
>
> # cvsup -g -L2 -h cvsup.foo.bar /usr/share/examples/cvsup/ports-supfile
>
> Rob.
>
> ------------------------------
>
> Message: 15
> Date: Fri, 26 Nov 2004 09:39:06 -0500
> From: Doug Van Allen <dvanallen at gmail.com>
> Subject: Re: Error in ghostscript
> To: Adam Fabian <afabian at austin.rr.com>, freebsd-questions at freebsd.org
> Message-ID: <2063a95c0411260639dd021f6 at mail.gmail.com>
> Content-Type: text/plain; charset=US-ASCII
>
> Tried that and it didn't work.
>
> > On Thu, 25 Nov 2004 10:23:39 -0600, Adam Fabian <afabian at austin.rr.com> wrote:
> > > I had an error building afl ghostscript a while ago. It required
> > > svgalib, which wasn't pulled in as a dependency. (Kind of snuck at it
> > > the back way by having drivers that required it.) Anyway, try
> > > installing the svgalib port and picking up the compile.
> > > --
> > > Adam Fabian (afabian at austin.rr.com)
> > >
> > >
> > >
> >
>
> ------------------------------
>
> Message: 16
> Date: Fri, 26 Nov 2004 15:38:49 +0100
> From: Gert Cuykens <gert.cuykens at gmail.com>
> Subject: Re: kernel compile error
> To: Brian Bobowski <bbobowski at cogeco.ca>
> Cc: Rob <spamrefuse at yahoo.com>
> Message-ID: <ef60af09041126063811983afc at mail.gmail.com>
> Content-Type: text/plain; charset=US-ASCII
>
> On Fri, 26 Nov 2004 09:32:08 -0500, Brian Bobowski <bbobowski at cogeco.ca> wrote:
> > Joshua Lokken wrote:
> >
> > >>On Fri, Nov 26, 2004 at 04:03:52PM +0900, Rob wrote:
> > >>
> > >>
> > >>>Matt Emmerton wrote:
> > >>>
> > >>>
> > >>>Having such a mechanism, would prevent lots of beginners in the
> > >>>kernel compiling stuff, to get frustrated with errors like above.
> > >>>
> > >>>
> > >Also, as you see, it's well-documented in the kernel config file ;)
> > >
> > >
> > While this is true, it's also easy enough for someone to snip the
> > directions when slicing things out of the config file. Assuming that the
> > user won't do things the wrong way is a sure way to succumb to Murphy's
> > Law(the real one).
> >
> > The main barrier I can see to this is getting whatever parses the config
> > file to recognise such dependencies; as it is, it's the compiler that
> > runs into the problem, not the program that calls the compiler. The
> > compiler doesn't know where the relevant source is if not told to
> > include it, after all.
> >
> > -BB
> >
> >
> > _______________________________________________
> > freebsd-questions at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
> >
>
> this is how a teletubie config file look like , teletubies dont like
> big files the prefer small ones.
>
> machine amd64
> cpu HAMMER
> ident GERT
>
> options SCHED_4BSD # ?????
> options INET # InterNETworking
> options INET6 # IPv6 communications protocols
> options FFS # Berkeley Fast Filesystem
> options SOFTUPDATES # Enable FFS soft updates support
> options UFS_ACL # Support for access control lists
> options UFS_DIRHASH # Improve performance on big directories
> options MD_ROOT # MD is a potential root device
> options NFSCLIENT # Network Filesystem Client
> options NFSSERVER # Network Filesystem Server
> options NFS_ROOT # NFS usable as /, requires NFSCLIENT
> options NTFS # NT File System
> options MSDOSFS # MSDOS Filesystem
> options CD9660 # ISO 9660 Filesystem
> options PROCFS # Process filesystem (requires PSEUDOFS)
> options PSEUDOFS # Pseudo-filesystem framework
> options GEOM_GPT # GUID Partition Tables.
> options COMPAT_IA32 # Compatible with i386 binaries
> options COMPAT_FREEBSD4 # Compatible with FreeBSD4
> options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI
> options KTRACE # ktrace(1) support
> options SYSVSHM # SYSV-style shared memory
> options SYSVMSG # SYSV-style message queues
> options SYSVSEM # SYSV-style semaphores
> options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions
> options KBD_INSTALL_CDEV # install a CDEV entry in /dev
> options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
> output. Adds ~128k to driver.
> options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
> output. Adds ~215k to driver.
> options ADAPTIVE_GIANT # Giant mutex is adaptive.
> options NO_MIXED_MODE # SK8N
> options ATA_STATIC_ID # Static device numbering
> options UDF # DJO
>
> device atpic # 8259A compatability
> device acpi # Bus support
> device isa # Bus support
> device pci # Bus support
> device fdc # Floppy drives
> device ata # ATA and ATAPI devices
> device atadisk # ATA disk drives
> device ataraid # ATA RAID drives
> device atapicd # ATAPI CDROM drives
> device atapifd # ATAPI floppy drives
> device atapist # ATAPI tape drives
> device scbus # SCSI bus (required for SCSI)
> device ch # SCSI media changers
> device da # Direct Access (disks)
> device sa # Sequential Access (tape etc)
> device cd # CD
> device pass # Passthrough device (direct SCSI access)
> device ses # SCSI Environmental Services (and SAF-TE)
> device atkbdc # AT keyboard controller
> device atkbd # AT keyboard
> device psm # PS/2 mouse
> device vga # VGA video card driver
> device splash # Splash screen and screen saver support
> device sc # syscons is the default console
> driver, resembling an SCO console
> device cbb # cardbus (yenta) bridge
> device pccard # PC Card (16-bit) bus
> device cardbus # CardBus (32-bit) bus
> device sio # 8250, 16[45]50 based serial ports
> device ppc # Parallel port
> device ppbus # Parallel port bus (required)
> device lpt # Printer
> device plip # TCP/IP over parallel
> device ppi # Parallel port interface device
> device rl # RealTek 8129/8139
> device loop # Network loopback
> device mem # Memory and kernel memory devices
> device io # I/O device
> device random # Entropy device
> device ether # Ethernet support
> device sl # Kernel SLIP
> device ppp # Kernel PPP
> device tun # Packet tunnel.
> device pty # Pseudo-ttys (telnet etc)
> device md # Memory "disks"
> device gif # IPv6 and IPv4 tunneling
> device faith # IPv6-to-IPv4 relaying (translation)
> device bpf # Berkeley packet filter
> device uhci # UHCI PCI->USB interface
> device ohci # OHCI PCI->USB interface
> device usb # USB Bus (required)
> device ugen # Generic
> device uhid # "Human Interface Devices"
> device ukbd # Keyboard
> device ulpt # Printer
> device umass # Disks/Mass storage - Requires scbus and da
> device ums # Mouse
> device uscanner # Scanners
> device rue # RealTek RTL8150 USB Ethernet
> device firewire # FireWire bus code
> device sbp # SCSI over FireWire (Requires scbus and da)
> device fwe # Ethernet over FireWire (non-standard!)
> device fwip # DJO
> device sound # DJO
> device atapicam # DJO
> device snd_ich # sound sk8n
>
> ------------------------------
>
> Message: 17
> Date: Fri, 26 Nov 2004 08:32:44 -0600 (CST)
> From: Adam Maloney <adam at whee.org>
> Subject: Best driver setup for GeForce2 MX
> To: freebsd-questions at freebsd.org
> Message-ID: <Pine.GSO.4.60.0411260823440.5400 at titan>
> Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed
>
> Hi All,
>
> I've got a 5-STABLE box with a GeForce2 MX 32M card (dual-head and SVideo
> out). My last card was a 4M Rage Pro (Nethack was AWESOME on this card!),
> so I don't have any experience with any of these fancy new-fangled
> graphics accelerators.
>
> Anyways, I'm having trouble figuring out the driver setup for this guy.
> I'm running xorg-server-6.7.0_9. I have the card working using the
> built-in NV driver, but no GL. I tried the FreeBSD drivers from NVidia,
> but they caused X to crash in various spectacular ways. My understanding
> is that these drivers are for XFree, and not Xorg?
>
> In any case, I'd like to know what combination of drivers, X, and animal
> sacrifices to use to get the most out of this card. Now that my graphics
> hardware is in the 21st century, I'd really like to see some
> graphics-accelerated love under FreeBSD.
>
> Regards,
>
> Adam
>
> ------------------------------
>
> Message: 18
> Date: Fri, 26 Nov 2004 16:00:36 +0100
> From: Ruben de Groot <mail25 at bzerk.org>
> Subject: Re: Restarting rc.conf
> To: Rob <spamrefuse at yahoo.com>
> Cc: FreeBSD <freebsd-questions at freebsd.org>
> Message-ID: <20041126150036.GA14314 at ei.bzerk.org>
> Content-Type: text/plain; charset=us-ascii
>
> On Thu, Nov 25, 2004 at 02:54:39PM +0900, Rob typed:
>
> > This does not work if a service has been changed from YES to NO (or has
> > been removed from rc.conf). Therefore I think this is better:
> >
> > foreach dir in /etc/rc.d /usr/local/etc/rc.d
> > do
> > cd $dir
> > foreach file in *
> > do
> > $file forcestop
> > $file start
> > done
> > done
>
> Have you actually tested this? I think not. (Hint: look at the scripts that
> are in /etc/rc.d and what they actually do. Then RTM rcorder(8).)
>
> ------------------------------
>
> Message: 19
> Date: Fri, 26 Nov 2004 15:03:49 +0000
> From: Dick Davies <rasputnik at hellooperator.net>
> Subject: Re: kernel compile error
> To: Brian Bobowski <bbobowski at cogeco.ca>
> Cc: FreeBSD Questions <freebsd-questions at freebsd.org>
> Message-ID: <20041126150349.GJ8520 at lb.tenfour>
> Content-Type: text/plain; charset=us-ascii
>
> * Brian Bobowski <bbobowski at cogeco.ca> [1134 14:34]:
> > Joshua Lokken wrote:
> >
> > >>On Fri, Nov 26, 2004 at 04:03:52PM +0900, Rob wrote:
> > >>
> > >>
> > >>>Matt Emmerton wrote:
> > >>>
> > >>>
> > >>>Having such a mechanism, would prevent lots of beginners in the
> > >>>kernel compiling stuff, to get frustrated with errors like above.
> > >>>
> > >>>
> > >Also, as you see, it's well-documented in the kernel config file ;)
> > >
> > >
> > While this is true, it's also easy enough for someone to snip the
> > directions when slicing things out of the config file. Assuming that the
> > user won't do things the wrong way is a sure way to succumb to Murphy's
> > Law(the real one).
>
> Yeah, but assuming a user who can't read a comment is happy enough to
> go editing a kernel config file, that's their funeral.
>
> "we'll err on the side of handing out rope and guns to all interested
> parties while hoping you have enough smarts to keep from hanging yourself
> or shooting yourself in the foot." - html, the definitive guide
>
> > The main barrier I can see to this is getting whatever parses the config
> > file to recognise such dependencies
>
> I agree it should be fixed in config if anywhere, but it's worth bearing
> in mind that kernel compiles on any platform are still non-trivial.
>
> I did a kernel build on Debian yesterday and it took half a dozen goes to
> get a USB mouse working because usbhid wasn't there. No warnings, just
> shedloads of insmod failures on reboot. Nice.
>
> At least our compiler craps out :)
>
> --
> What have you done to the cat? It looks half-dead. - Schroedinger's wife
> Rasputin :: Jack of All Trades - Master of Nuns
>
> ------------------------------
>
> Message: 20
> Date: Fri, 26 Nov 2004 15:25:13 +0000
> From: RW <list-freebsd-2004 at morbius.sent.com>
> Subject: Re: Updating packages list (using cvsup?)
> To: freebsd-questions at freebsd.org
> Message-ID: <200411261525.14104.list-freebsd-2004 at morbius.sent.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> On Friday 26 November 2004 14:22, Olaf Greve wrote:
> > Hi Thomas (and others),
> >
> > First off: thanks a lot for your answer, this is indeed what I was
> >
> > looking for...
>
> I should also install portupgrade if I were you, it make managing ports a lot
> easier.
>
> It also has the -P and -PP options (and corresponding per port settings
> in /usr/local/etc/pkgtools.conf) which are useful for combining ports and
> packages. For example a full KDE upgrade from ports takes me 3 days, but by
> allowing portupgrade to install some of the less-important kde components
> from fully up-to-date packages, I cut that down to one day.
>
> ------------------------------
>
> Message: 21
> Date: Fri, 26 Nov 2004 16:26:22 +0100
> From: DanGer <danger at wilbury.sk>
> Subject: Re[2]: WRITE_DMA failures on 5.3 (but NOT on 4.10)
> To: Peter Risdon <peter at circlesquared.com>, questions at freebsd.org
> Message-ID: <859059364.20041126162622 at wilbury.sk>
> Content-Type: text/plain; charset=us-ascii
>
> Hi Peter,
>
> Friday, November 26, 2004, 2:04:33 PM, you wrote these comments:
>
> >>>
> >>> WARNING : WRITE_DMA UDMA ICRC ERROR <LBA..... blah
> >>> FAILURE : WRITE_DMA status = 51<Ready, DSC, error>... blah
> >>> this continues until i run out of patience.
> >>
> >>
> >> This is a really major problem that has affected every 5.3 and the more
> >> recent 5.2.1 machines I've operated with largish [1] hard drives. The
> >> novelty of losing several tens of gigs of data any time a drive gets
> >> busy wears off fairly quickly.
> >>
> >>>
> >>> the advice i received was :
> >>
> >>
> >> ... mainly about checking hardware, and this is _not_ the issue. I've
> >> googled extensively on this and, as you did, replaced every hardware
> >> component in the IDE lines, including the disk drives, without affecting
> >> the problem.
> >>
> >> So far as I can make out, there was a change to default settings at some
> >> point (I haven't scoured the CVS repository to find out exactly when) to
> >> enable DMA because some newer drives require this[2].
> >>
>
> > No - apologies for wasting bandwidth. I got to this stage of research
> > very late a couple of nights ago and see I should have stopped a few
> > hours earlier. Looking again, this:
>
> > hw.ata.atapi_dma: 0
>
> > in loader.conf might fix the problem with atapi drives but the
>
> > hw.ata.ata_dma: 1
>
> > sysctl setting seems to have been the default in 4.10 too, so that can't
> > be it.
>
> > I think I might try turning off ata dma in a 5.3 system anyway, and
> > putting a big drive under load to see what happens, but I fear I'm
> > probably back to square one.
>
> > Peter.
>
> i have the same issue on brand new 200gb ata maxtor hard drive. i had
> the same issue on 5.2.1, but when i upgraded to 5.3 i decided to turn on
> ata dma but after 9 days of uptime it froze..no logs, whatever...so i
> turned ata dma off for now, and i will stay and watch what will happen..
>
> but there should be some other fix, because i don't want to keep my
> disc in pio mode :/
>
> --
> Best Regards,
>
> +----------==/\/\==----------+ (__) FreeBSD
> | DanGer <danger at wilbury.sk> | \\\'',) The
> | DanGer at IRCnet ICQ261701668 | \/ \ ^ Power
> | http://danger.homeunix.org | .\._/_) To
> +----------==\/\/==----------+ Serve
>
> [ "Sometimes out big splashes are just ripples in the pool" ]
>
> ------------------------------
>
> Message: 22
> Date: Fri, 26 Nov 2004 10:32:23 -0500
> From: RL <rlurman at gmail.com>
> Subject: Re: Playing DVD movies with Xine
> To: freebsd-questions at freebsd.org
> Message-ID: <e6ceb9d4041126073273e8bba2 at mail.gmail.com>
> Content-Type: text/plain; charset=US-ASCII
>
> I have that already. I already had /dev/dvd linked
>
> ------------------------------
>
> Message: 23
> Date: Fri, 26 Nov 2004 15:45:59 +0000
> From: Peter Risdon <peter at circlesquared.com>
> Subject: Re: WRITE_DMA failures on 5.3 (but NOT on 4.10)
> To: DanGer <danger at wilbury.sk>
> Cc: questions at freebsd.org
> Message-ID: <41A74FB7.4010907 at circlesquared.com>
> Content-Type: text/plain; charset=us-ascii; format=flowed
>
> DanGer wrote:
> [...]
> >
> >
> > i have the same issue on brand new 200gb ata maxtor hard drive. i had
> > the same issue on 5.2.1, but when i upgraded to 5.3 i decided to turn on
> > ata dma but after 9 days of uptime it froze..no logs, whatever...so i
> > turned ata dma off for now, and i will stay and watch what will happen..
>
> That's very helpful, thank you. The behaviour you describe - machine
> freezing - is exactly what I have experienced. I'm feeling vaguely
> optimistic now :-)
>
> >
> > but there should be some other fix, because i don't want to keep my
> > disc in pio mode :/
>
> Absolutely. But I guess, since I'm not going to try to produce a fix
> myself, I can't whinge too loudly. A workaround is what I need right now
> and I hope you've confirmed that this is one.
>
> Peter.
>
> --
>
> the circle squared
>
> network systems and software
>
> http://www.circlesquared.com
>
> ------------------------------
>
> Message: 24
> Date: Fri, 26 Nov 2004 15:53:19 +0000
> From: RW <list-freebsd-2004 at morbius.sent.com>
> Subject: Re: Playing DVD movies with Xine
> To: freebsd-questions at freebsd.org
> Message-ID: <200411261553.19777.list-freebsd-2004 at morbius.sent.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> On Friday 26 November 2004 12:30, Graham Bentley wrote:
> > I had to do this before Xine would recognise my DVD's
> >
> > ln -s /dev/acd0 /dev/dvd
> > ln -s /dev/acd0 /dev/rdvd
> >
>
> You can setup this kind of thing inside xine, but you have to change your
> "experience level" setting, otherwise it hides a lot of options.
>
> ------------------------------
>
> Message: 25
> Date: Fri, 26 Nov 2004 17:11:16 +0100
> From: FreeBsdBeni <freebsdbeni at spymac.com>
> Subject: loading ndis at boot ?
> To: freebsd-questions at freebsd.org
> Message-ID: <200411261711.20405.freebsdbeni at spymac.com>
> Content-Type: text/plain; charset="iso-8859-15"
>
> Hi,
>
> How do I load the ndis.ko driver at boot/startup ? I've followed the
> instructions on how to get the ndisulator working for my Z-Com wi-fi mini pci
> card and got a (working) ndis0 dev now. I can kldload the ndis.ko and
> if_ndis.ko but is there a way to automate this via /boot/loader.conf
> or /etc/rc.conf ? And if so, what do I need to put in those files ? Something
> like "ndis_load="YES" ?
>
> Thanks for any info !
>
> I'm running 5.3-REL-p1.
> --
> Beni.
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: not available
> Type: application/pgp-signature
> Size: 187 bytes
> Desc: not available
> Url : http://lists.freebsd.org/pipermail/freebsd-questions/attachments/20041126/bb463ce7/attachment-0001.bin
>
> ------------------------------
>
> Message: 26
> Date: Fri, 26 Nov 2004 09:15:11 -0700
> From: Don Wilde <Don at Silver-Lynx.com>
> Subject: Re: shell programming challenge
> To: freebsd-questions at freebsd.org
> Cc: Jan Grant <Jan.Grant at bristol.ac.uk>
> Message-ID: <41A7568F.3000906 at Silver-Lynx.com>
> Content-Type: text/plain; charset=us-ascii; format=flowed
>
> >
> > If you have the option to modify it, ensure that your script exits via
> > "exec sh". Alternatively a wrapper that does this is straightforward to
> > build.
> >
> It's looking more and more that I need to make a temporary file that
> packages both the init file and the program command line (eval
> "blah...") before running. These will not be just shell scripts, they
> will be tool programs and x applications. Didn't want to do that because
> of the risk of leaving junk in /tmp.
>
> --
> Don Wilde ---------> Silver Lynx <----------
> Raising the Trajectory of Human Development
> ---------------------------------------------
> http://www.Silver-Lynx.com
>
> ------------------------------
>
> Message: 27
> Date: Fri, 26 Nov 2004 17:40:38 +0100
> From: Kees Plonsz <kees at jeremino.homeunix.net>
> Subject: Re: Best driver setup for GeForce2 MX
> To: freebsd-questions at freebsd.org
> Message-ID: <200411261740.38265.kees at jeremino.homeunix.net>
> Content-Type: text/plain; charset="us-ascii"
>
> I got the driver from the NVIDIA site and it works without any problems.
> My system is 5.3 release and the card I use is:
>
> nvidia0: <GeForce2 MX/MX 400> mem 0xd0000000-0xd7ffffff,0xde000000-0xdeffffff
> irq 16 at device 0.0 on pci1
>
> I excluded Module "dri" ( I dont remember why ) and I use the Xorg library.
>
> Maybe you better not use 5 stable but 5.3 release instead.
>
> ------------------------------
>
> Message: 28
> Date: Fri, 26 Nov 2004 17:42:06 +0100
> From: "Matthias F. Brandstetter" <haimat at lame.at>
> Subject: eject DAT tape via command?
> To: freebsd-questions at freebsd.org
> Message-ID: <200411261742.06785.haimat at lame.at>
> Content-Type: text/plain; charset="us-ascii"
>
> Hi all,
>
> is it possible to eject a DAT tape via a command from CLI?
> "eject" does not seem to work :(
>
> Greets and TIA, Matthias
>
> --
> Oh, honey, I didn't get drunk, I just went to a strange fantasy world.
>
> -- Homer Simpson
> El Viaje Misterioso De Nuestro Jomer
>
> ------------------------------
>
> Message: 29
> Date: Fri, 26 Nov 2004 16:46:58 +0000
> From: Martin Hepworth <martinh at solid-state-logic.com>
> Subject: Re: eject DAT tape via command?
> To: "Matthias F. Brandstetter" <haimat at lame.at>
> Cc: freebsd-questions at freebsd.org
> Message-ID: <41A75E02.3040902 at solid-state-logic.com>
> Content-Type: text/plain; charset=us-ascii; format=flowed
>
> Matthias
>
> mt -f /dev/sa0 rewoff
>
> replace /dev/sa0 with required device...
>
> --
> Martin Hepworth
> Snr Systems Administrator
> Solid State Logic
> Tel: +44 (0)1865 842300
>
> Matthias F. Brandstetter wrote:
> > Hi all,
> >
> > is it possible to eject a DAT tape via a command from CLI?
> > "eject" does not seem to work :(
> >
> > Greets and TIA, Matthias
> >
>
> **********************************************************************
>
> This email and any files transmitted with it are confidential and
> intended solely for the use of the individual or entity to whom they
> are addressed. If you have received this email in error please notify
> the system manager.
>
> This footnote confirms that this email message has been swept
> for the presence of computer viruses and is believed to be clean.
>
> **********************************************************************
>
> ------------------------------
>
> Message: 30
> Date: Fri, 26 Nov 2004 17:47:36 +0100
> From: lists <lists at sleektech.nl>
> Subject: Re: eject DAT tape via command?
> To: "Matthias F. Brandstetter" <haimat at lame.at>
> Cc: freebsd-questions at freebsd.org
> Message-ID: <41A75E28.9040907 at sleektech.nl>
> Content-Type: text/plain; charset=us-ascii; format=flowed
>
> Try:
> mt -f /dev/<tape> rewoffl
>
> Regards,
>
> Matthias F. Brandstetter wrote:
>
> >Hi all,
> >
> >is it possible to eject a DAT tape via a command from CLI?
> >"eject" does not seem to work :(
> >
> >Greets and TIA, Matthias
> >
> >
> >
>
> ------------------------------
>
> Message: 31
> Date: Fri, 26 Nov 2004 16:50:16 +0000
> From: Gary Hayers <gary at hayers.org>
> Subject: Re: eject DAT tape via command?
> To: "Matthias F. Brandstetter" <haimat at lame.at>,
> freebsd-questions at freebsd.org
> Message-ID: <41A75EC8.80802 at hayers.org>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Matthias F. Brandstetter wrote:
>
> >Hi all,
> >
> >is it possible to eject a DAT tape via a command from CLI?
> >"eject" does not seem to work :(
> >
> >Greets and TIA, Matthias
> >
> >
>
> In my backup script I have
>
> # Wait 5 minutes for rewind
> sleep 300
>
> if [ $EJECT -eq 1 ]
> then
> mt offline
> fi
>
> #
>
> mt offine does it for me :)
>
> ------------------------------
>
> Message: 32
> Date: Fri, 26 Nov 2004 17:55:58 +0100
> From: "Matthias F. Brandstetter" <haimat at lame.at>
> Subject: Re: eject DAT tape via command?
> To: freebsd-questions at freebsd.org
> Message-ID: <200411261755.58314.haimat at lame.at>
> Content-Type: text/plain; charset="iso-8859-1"
>
> ---------- quoting Matthias F. Brandstetter ----------
> > is it possible to eject a DAT tape via a command from CLI?
> > "eject" does not seem to work :(
>
> thanks guys for all this *quick* answers!
> greets, Matthias
>
> --
> Around the house, I never lift a finger
> As a husband and father I'm sub-par
> I'd rather drink a beer
> than win Father of the Year
> I'm happy with things the way they are
>
> -- Homer Simpson
> Simpsoncalifragilisticexpiala(annoyed grunt)ocious
>
> ------------------------------
>
> Message: 33
> Date: Fri, 26 Nov 2004 16:59:30 +0000
> From: Jake Stride <nsuk at users.sourceforge.net>
> Subject: Re: Xorg/Modes issue
> To: freebsd-questions at freebsd.org
> Message-ID: <41A760F2.3050908 at users.sourceforge.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Adam Fabian wrote:
>
> >>(II) I810(0): Not using mode "1280x1024" (no mode of this name)
> >>
> >>
> >
> >1280x1024 at 75Hz looks like it might be the name of a mode. Otherwise,
> >you could just write a modeline that does what you want.
> >
> >
> OK I have fixed this issue, it seems I missed the fact that the bios had
> set the video ram to 1meg, putting it up to 8med has sorted it!
>
> Thanks
>
> Jake
>
> ------------------------------
>
> Message: 34
> Date: Fri, 26 Nov 2004 10:58:52 -0600
> From: Adam Fabian <afabian at austin.rr.com>
> Subject: Re: Running commands at startup
> To: FreeBSD Mailing List <freebsd-questions at freebsd.org>
> Message-ID: <20041126165852.GA93504 at turingmachine.mentalsiege.net>
> Content-Type: text/plain; charset=us-ascii
>
> On Fri, Nov 26, 2004 at 12:04:14PM +0000, Danny Browne wrote:
> >
> > This will probobly seem like such a basic question, but where can do i
> > put commands i want to run at startup.
> >
> > freeBSD 4.10
> >
> > i want to run (for example)
> >
> > alias 'ls=ls -G' alias 'vi=vim' alias 'shutdown=shutdown -h now'
> > etc...
>
> This is typically a function of your shell, unless you want to do it
> on a system-wide basis. (A little while ago, I was trying to figure
> out how to change the environment that processes inheirit from init on
> FreeBSD but didn't have much luck.) csh and derivatives tend to use
> .login and .cshrc, sh and derivatives tend to use .profile and .shrc.
>
> > Also, i am running fluxbox, but my mouse is very slow when it starts
> > up. at the moment i have to enter xset m 5/1 in the terminal to speed it
> > up. How can i get fluxbox do do this at startup?
>
> Put the command in your .xinitrc if you're using a display manager,
> and your .Xsession (I think) if you're not. (It will be X that
> executes the command, not fluxbox.)
>
> --
> Adam Fabian (afabian at austin.rr.com)
>
> ------------------------------
>
> Message: 35
> Date: Fri, 26 Nov 2004 17:02:00 +0000 (GMT)
> From: grog at FreeBSD.ORG (Greg Lehey)
> Subject: How to get best results from FreeBSD-questions
> To: FreeBSD-questions at FreeBSD.org
> Message-ID: <20041126170200.8F9BC16A4CF at hub.freebsd.org>
>
> How to get the best results from FreeBSD questions.
> ===================================================
>
> Last update $Date: 2004/09/19 02:40:48 $
>
> This is a regular posting to the FreeBSD questions mailing list. If
> you got it in answer to a message you sent, it means that the sender
> thinks that at least one of the following things was wrong with your
> message:
>
> - You left out a subject line, or the subject line was not appropriate.
> - You formatted it in such a way that it was difficult to read.
> - You asked more than one unrelated question in one message.
> - You sent out a message with an incorrect date, time or time zone.
> - You sent out the same message more than once.
> - You sent an 'unsubscribe' message to FreeBSD-questions.
>
> If you have done any of these things, there is a good chance that you
> will get more than one copy of this message from different people.
> Read on, and your next message will be more successful.
>
> This document is also available on the web at
> http://www.lemis.com/questions.html.
>
> =====================================================================
>
> Contents:
>
> I: Introduction
> II: How to unsubscribe from FreeBSD-questions
> III: Should I ask -questions, -newbies or -hackers?
> IV: How to submit a question to FreeBSD-questions
> V: How to answer a question to FreeBSD-questions
>
> I: Introduction
> ===============
>
> This is a regular posting aimed to help both those seeking advice from
> FreeBSD-questions (the "newcomers"), and also those who answer the
> questions (the "hackers").
>
> Note that the term "hacker" has nothing to do with breaking
> into other people's computers. The correct term for the latter
> activity is "cracker", but the popular press hasn't found out
> yet. The FreeBSD hackers disapprove strongly of cracking
> security, and have nothing to do with it.
>
> In the past, there has been some friction which stems from the
> different viewpoints of the two groups. The newcomers accused the
> hackers of being arrogant, stuck-up, and unhelpful, while the hackers
> accused the newcomers of being stupid, unable to read plain English,
> and expecting everything to be handed to them on a silver platter. Of
> course, there's an element of truth in both these claims, but for the
> most part these viewpoints come from a sense of frustration.
>
> In this document, I'd like to do something to relieve this frustration
> and help everybody get better results from FreeBSD-questions. In the
> following section, I recommend how to submit a question; after that,
> we'll look at how to answer one.
>
> II: How to unsubscribe from FreeBSD-questions
> ==============================================
>
> When you subscribed to FreeBSD-questions, you got a welcome message
> from freebsd-questions-request at FreeBSD.ORG. In this message, amongst
> other things, it told you how to unsubscribe. Here's a typical
> message:
>
> Welcome to the freebsd-questions at freebsd.org mailing list!
>
> If you ever want to unsubscribe or change your options (eg, switch to
> or from digest mode, change your password, etc.), visit your
> subscription page at:
>
> http://lists.freebsd.org/mailman/options/freebsd-questions/me@me.org
>
> (obviously, substitute your mail address for "me at me.org"). You can
> also make such adjustments via email by sending a message to:
>
> freebsd-questions-request at freebsd.org
>
> with the word 'help' in the subject or body (don't include the
> quotes), and you will get back a message with instructions.
>
> You must know your password to change your options (including
> changing the password, itself) or to unsubscribe.
>
> Normally, Mailman will remind you of your freebsd.org mailing list
> passwords once every month, although you can disable this if you
> prefer. This reminder will also include instructions on how to
> unsubscribe or change your account options. There is also a button on
> your options page that will email your current password to you.
>
> Here's the general information for the list you've
> subscribed to, in case you don't already have it:
>
> FREEBSD-QUESTIONS User questions
> This is the mailing list for questions about FreeBSD. You should not
> send "how to" questions to the technical lists unless you consider the
> question to be pretty technical.
>
> Normally, unsubscribing is even simpler than the message suggests: you
> don't need to specify your mail ID unless it is different from the one
> which you specified when you subscribed.
>
> If Majordomo replies and tells you (incorrectly) that you're not on
> the list, this may mean one of two things:
>
> 1. You have changed your mail ID since you subscribed. That's where
> keeping the original message from majordomo comes in handy. For
> example, the sample message above shows my mail ID as
> grog at lemis.de. Since then, I have changed it to
> grog at lemis.com. If I were to try to remove grog at lemis.com from
> the list, it would fail: I would have to specify the name with
> which I joined.
>
> 2. You're subscribed to a mailing list which is subscribed to
> FreeBSD-questions. If that's the case, you'll have to figure out
> which one it is and get your name taken off that one. If you're
> not sure which one it might be, check the headers of the
> messages you receive from freebsd-questions: maybe there's a
> clue there.
>
> If you've done all this, and you still can't figure out what's going
> on, send a message to Postmaster at FreeBSD.org, and he will sort things
> out for you. Don't send a message to FreeBSD-questions: they can't
> help you.
>
> III: Should I ask -questions, -newbies or -hackers?
> ===================================================
>
> Two mailing lists handle general questions about FreeBSD,
> FreeBSD-questions and FreeBSD-hackers. In addition, the
> FreeBSD-newbies list caters specifically for people who are new to
> FreeBSD and may be having trouble getting used to the environment. In
> some cases, it's not really clear which group you should ask. The
> following criteria should help for 99% of all questions, however:
>
> If the question is of a general nature, first check whether this
> isn't a Frequently Asked Question (FAQ). There's a list of these
> questions at
> http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/index.html,
> and also on your own system (once you've installed it) at
> /usr/share/doc/en/books/faq/index.html. Check there, and if you
> don't find an answer, ask FreeBSD-questions. Examples might be
> questions about installing FreeBSD or the use of a particular
> UNIX utility.
>
> If you think the question relates to a bug, but you're not sure,
> or you don't know how to look for it, send the message to
> FreeBSD-questions.
>
> If the question relates to a bug, and you're almost sure that
> it's a bug (for example, you can pinpoint the place in the code
> where it happens, and you maybe have a fix), then send the
> message to FreeBSD-hackers. You should also enter a problem
> report with the send-pr utility.
>
> If the question relates to enhancements to FreeBSD, and you can
> make suggestions about how to implement them, then send the
> message to FreeBSD-hackers.
>
> If the question is of particularly technical nature, such as
> implementation details or suggestions for improvements, then send
> the message to FreeBSD-hackers.
>
> If you're new to FreeBSD, and the message is about your own
> relationship to FreeBSD, send the message to FreeBSD-newbies.
>
> There are also a number of other specialized mailing lists, for
> example FreeBSD-isp, which caters to the interests of ISPs (Internet
> Service Providers) who run FreeBSD. If you happen to be an ISP, this
> doesn't mean you should automatically send your questions to
> FreeBSD-isp. The criteria above still apply, and it's in your
> interest to stick to them, since you're more likely to get good
> results that way.
>
> IV: How to submit a question
> =============================
>
> When submitting a question to FreeBSD-questions, consider the
> following points:
>
> 1. Remember that nobody gets paid for answering a FreeBSD question.
> They do it of their own free will. You can influence this free
> will positively by submitting a well-formulated question
> supplying as much relevant information as possible. You can
> influence this free will negatively by submitting an incomplete,
> illegible, or rude question. It's perfectly possible to send a
> message to FreeBSD-questions and not get an answer even if you
> follow these rules. It's much more possible to not get an
> answer if you don't. In the rest of this document, we'll look
> at how to get the most out of your question to
> FreeBSD-questions.
>
> 2. Not everybody who answers FreeBSD questions reads every message:
> they look at the subject line and decide whether it interests
> them. Clearly, it's in your interest to specify a subject.
> ``FreeBSD problem'' or ``Help'' aren't enough. If you provide
> no subject at all, many people won't bother reading it. If your
> subject isn't specific enough, the people who can answer it may
> not read it.
>
> 3. When sending a new message, well, send a new message. Don't
> reply to some other message, erase the old content and change
> the subject line. That leaves an In-reply-to: header which many
> mail readers use to thread messages, so your message shows up as
> a reply to some other message. People often delete messages a
> whole thread at a time, so apart from irritating people, you
> also run a chance of having the message deleted unread.
>
> 4. Format your message so that it is legible, and PLEASE DON'T
> SHOUT!!!!!. We appreciate that a lot of people don't speak
> English as their first language, and we try to make allowances
> for that, but it's really painful to try to read a message
> written full of typos or without any line breaks. A lot of
> badly formatted messages come from bad mailers or badly
> configured mailers. The following mailers are known to send out
> badly formatted messages without you finding out about them:
>
> Eudora
> exmh
> Microsoft Exchange
> Microsoft Internet Mail
> Microsoft Outlook
> Netscape
>
> As you can see, the mailers in the Microsoft world are frequent
> offenders. If at all possible, use a UNIX mailer. If you must
> use a mailer under Microsoft environments, make sure it is set
> up correctly. Try not to use MIME: a lot of people use mailers
> which don't get on very well with MIME.
>
> For further information on this subject, check out
> http://www.lemis.com/email.html.
>
> 5. Make sure your time and time zone are set correctly. This may
> seem a little silly, since your message still gets there, but
> many of the people you are trying to reach get several hundred
> messages a day. They frequently sort the incoming messages by
> subject and by date, and if your message doesn't come before the
> first answer, they may assume they missed it and not bother to
> look.
>
> 6. Don't include unrelated questions in the same message. Firstly,
> a long message tends to scare people off, and secondly, it's
> more difficult to get all the people who can answer all the
> questions to read the message.
>
> 7. Specify as much information as possible. This is a difficult
> area, and we need to expand on what information you need to
> submit, but here's a start:
>
> If you get error messages, don't say ``I get error
> messages'', say (for example) ``I get the error message 'No
> route to host'''.
>
> If your system panics, don't say ``My system panicked'', say
> (for example) ``my system panicked with the message 'free
> vnode isn't'''.
>
> If you have difficulty installing FreeBSD, please tell us
> what hardware you have. In particular, it's important to
> know the IRQs and I/O addresses of the boards installed in
> your machine.
>
> If you have difficulty getting PPP to run, describe the
> configuration. Which version of PPP do you use? What kind of
> authentication do you have? Do you have a static or dynamic
> IP address? What kind of messages do you get in the log file?
>
> 8. If you don't get an answer immediately, or if you don't even see
> your own message appear on the list immediately, don't resend
> the message. Wait at least 24 hours. The FreeBSD mailer
> offloads messages to a number of subordinate mailers around the
> world, and sometimes it can take several hours for the mail to
> get through. And once it gets through, the one person who might
> know the answer will probably just have gone to bed in his part
> of the world.
>
> 9. If you do all this, and you still don't get an answer, there
> could be other reasons. For example, the problem is so
> complicated that nobody knows the answer, or the person who does
> know the answer was offline. If you don't get an answer after,
> say, a week, it might help to re-send the message. If you don't
> get an answer to your second message, though, you're probably
> not going to get one from this forum. Resending the same
> message again and again will only make you unpopular.
>
> To summarize, let's assume you know the answer to the following
> question (yes, it's the same one in each case :-). You choose which of
> these two questions you would be more prepared to answer:
>
> Message 1:
> Subject: (none)
>
> I just can't get hits damn silly FereBSD system to workd, and Im really good at this tsuff, but I have never seen anythign sho difficult to install, it jst wont work whatever I try so why don't y9ou guys tell me what I doing wrong.
>
> ----------------------------------------------------------------------
>
> Message 2:
> Subject: Problems installing FreeBSD
>
> I've just got the FreeBSD 2.1.5 CD-ROM from Walnut Creek, and I'm
> having a lot of difficulty installing it. I have a 66 MHz 486 with 16
> MB of memory and an Adaptec 1540A SCSI board, a 1.2GB Quantum Fireball
> disk and a Toshiba 3501XA CD-ROM drive. The installation works just
> fine, but when I try to reboot the system, I get the message "Missing
> Operating System".
>
> ----------------------------------------------------------------------
>
> V: How to follow up to a question
> =================================
>
> Often you will want to send in additional information to a question
> you have already sent. The best way to do this is to reply to your
> original message. This has three advantages:
>
> 1. You include the original message text, so people will know what
> you're talking about. Don't forget to trim unnecessary text out,
> though.
>
> 2. The text in the subject line stays the same (you did remember to
> put one in, didn't you?). Many mailers will sort messages by
> subject. This helps group messages together.
>
> 3. The message reference numbers in the header will refer to the
> previous message. Some mailers, such as mutt, can thread messages,
> showing the exact relationships between the messages.
>
> VI: How to answer a question
> ============================
>
> Before you answer a question to FreeBSD-questions, consider:
>
> 1. A lot of the points on submitting questions also apply to
> answering questions. Read them.
>
> 2. Has somebody already answered the question? The easiest way to
> check this is to sort your incoming mail by subject: then
> (hopefully) you'll see the question followed by any answers, all
> together.
>
> If somebody has already answered it, it doesn't automatically mean
> that you shouldn't send another answer. But it makes sense to
> read all the other answers first.
>
> 3. Do you have something to contribute beyond what has already been
> said? In general, "Yeah, me too" answers don't help much,
> although there are exceptions, like when somebody is describing a
> problem he's having, and he doesn't know whether it's his fault or
> whether there's something wrong with the hardware or software. If
> you do send a "me too" answer, you should also include any further
> relevant information.
>
> 4. Are you sure you understand the question? Very frequently, the
> person who asks the question is confused or doesn't express
> himself very well. Even with the best understanding of the system,
> it's easy to send a reply which doesn't answer the question. This
> doesn't help: you'll leave the person who submitted the question
> more frustrated or confused than ever. If nobody else answers, and
> you're not too sure either, you can always ask for more
> information.
>
> 5. Are you sure your answer is correct? If not, wait a day or so.
> If nobody else comes up with a better answer, you can still reply
> and say, for example, "I don't know if this is correct, but since
> nobody else has replied, why don't you try replacing your ATAPI
> CD-ROM with a frog?".
>
> 6. Unless there's a good reason to do otherwise, reply to the sender
> and to FreeBSD-questions. Many people on the FreeBSD-questions
> are "lurkers": they learn by reading messages sent and replied to
> by others. If you take a message which is of general interest off
> the list, you're depriving these people of their information. Be
> careful with group replies; lots of people send messages with
> hundreds of CCs. If this is the case, be sure to trim the Cc:
> lines appropriately.
>
> 7. Include relevant text from the original message. Trim it to the
> minimum, but don't overdo it. It should still be possible for
> somebody who didn't read the original message to understand what
> you're talking about.
>
> 8. Use some technique to identify which text came from the original
> message, and which text you add. I personally find that prepending
> ``> '' to the original message works best. Leaving white space
> after the ``> '' and leave empty lines between your text and the
> original text both make the result more readable.
>
> 9. Put your response in the correct place (after the text to which it
> replies). It's very difficult to read a thread of responses where
> each reply comes before the text to which it replies.
>
> 10. Most mailers change the subject line on a reply by prepending a
> text such as ``Re: ''. If your mailer doesn't do it
> automatically, you should do it manually.
>
> 11. If the submitter didn't abide by format conventions (lines too
> long, inappropriate subject line), please fix it. In the case of
> an incorrect subject line (such as ``HELP!!??''), change the
> subject line to (say) ``Re: Difficulties with sync PPP (was:
> HELP!!??)''. That way other people trying to follow the thread
> will have less difficulty following it.
>
> In such cases, it's appropriate to say what you did and why you
> did it, but try not to be rude. If you find you can't answer
> without being rude, don't answer.
>
> If you just want to reply to a message because of its bad format,
> just reply to the submitter, not to the list. You can just send
> him this message in reply, if you like.
>
> $Id: Howto-ask-questions,v 1.5 2004/09/19 02:40:48 grog Exp $
> _______________________________________________
>
> Thanks to Josh Paetzel for updating this document to describe mailman.
>
> ------------------------------
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
>
> End of freebsd-questions Digest, Vol 81, Issue 20
> *************************************************
>
More information about the freebsd-questions
mailing list