ATI Radeon 9250 on FreeBSD 5.2.1 AMD64 - can't detect
Chan Fook Sheng
chanfs16 at yahoo.com
Mon Nov 22 21:01:35 PST 2004
Hi
I recently installed FreeBSD 521 on amd64. I am using
ATI Radeon 9250 AGP graphics card.
It seems that the graphics card is not recognised,
even after i recompile my kernel to include "device
agp".
so now i can;t take advantage of the video card and my
X is still using VGA driver.
i have attached my dmesg and XF86Config.
Best Regards and many thanks.
j
=====================================================
dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
The Regents of the University of California. All
rights reserved.
FreeBSD 5.2.1-RELEASE #2: Mon Nov 22 15:37:37 SGT 2004
root@:/usr/src/sys/amd64/compile/RELAX
Preloaded elf kernel "/boot/kernel/kernel" at
0xffffffff806c5000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 2800+ (1808.26-MHz
K8-class CPU)
Origin = "AuthenticAMD" Id = 0xfc0 Stepping = 0
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500000<NX,MMX+,LM,3DNow!+,3DNow!>
real memory = 536805376 (511 MB)
avail memory = 501805056 (478 MB)
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver
attached)
ohci0: <OHCI (generic) USB controller> mem
0xec003000-0xec003fff irq 3 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x10de) OHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem
0xec004000-0xec004fff irq 3 at device 2.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x10de) OHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pci0: <serial bus, USB> at device 2.2 (no driver
attached)
pci0: <bridge, PCI-unknown> at device 5.0 (no driver
attached)
pci0: <multimedia, audio> at device 6.0 (no driver
attached)
atapci0: <GENERIC ATA controller> port 0xf000-0xf00f
at device 8.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
atapci1: <GENERIC ATA controller> port
0xdb00-0xdb7f,0xda00-0xda0f,0xb60-0xb63,0x960-0x967,0xbe0-0xbe3,0x9e0-0x9e7
irq 11 at device 9.0 on pci0
atapci1: [MPSAFE]
ata2: at 0x9e0 on atapci1
ata2: [MPSAFE]
ata3: at 0x960 on atapci1
ata3: [MPSAFE]
atapci2: <GENERIC ATA controller> port
0xe100-0xe17f,0xe000-0xe00f,0xb70-0xb73,0x970-0x977,0xbf0-0xbf3,0x9f0-0x9f7
irq 10 at device 10.0 on pci0
atapci2: [MPSAFE]
ata4: at 0x9f0 on atapci2
ata4: [MPSAFE]
ata5: at 0x970 on atapci2
ata5: [MPSAFE]
pcib1: <PCI-PCI bridge> at device 11.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver
attached)
pci1: <display> at device 0.1 (no driver attached)
pcib2: <PCI-PCI bridge> at device 14.0 on pci0
pci2: <PCI bus> on pcib2
xl0: <3Com 3c905B-TX Fast Etherlink XL> port
0xc000-0xc07f mem 0xeb021000-0xeb02107f irq 3 at
device 8.0 on pci2
xl0: Ethernet address: 00:10:4b:0c:0e:94
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
fwohci0: <VIA VT6306> port 0xc100-0xc17f mem
0xeb020000-0xeb0207ff irq 5 at device 12.0 on pci2
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 8.
fwohci0: EUI64 00:10:dc:00:00:67:11:a0
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:10:dc:67:11:a0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
orm0: <Option ROMs> at iomem
0xd4000-0xd57ff,0xd0000-0xd3fff,0xc0000-0xccfff on
isa0
atkbdc0: <Keyboard controller (i8042)> at port
0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or
clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1808256677 Hz quality 800
Timecounters tick every 10.000 msec
IP Filter: v3.4.31 initialized. Default = pass all,
Logging = enabled
GEOM: create disk ad0 dp=0xffffff0000be42a0
ad0: 2014MB <ST32122A> [4092/16/63] at ata0-master
UDMA33
GEOM: create disk ad1 dp=0xffffff001e401ea0
ad1: 2446MB <ST52520A> [4970/16/63] at ata0-slave
WDMA2
acd0: CDROM <SONY CDU4811> at ata1-master PIO4
GEOM: create disk ad4 dp=0xffffff001dfeb4a0
ad4: 76319MB <ST380013AS> [155061/16/63] at
ata2-master UDMA33
Mounting root from ufs:/dev/ad4s2a
ums0: Microsoft Microsoft Wheel Mouse Optical\M-., rev
1.10/1.21, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 2 (addr 2) disconnected
ums0: detached
ums0: Microsoft Microsoft Wheel Mouse Optical\M-., rev
1.10/1.21, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
IP Filter: v3.4.31 unloaded
XF86Config
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>:
"True"/"False",
### <string>: "String", <freq>: "<f>
Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "VGAClocks" # [<bool>]
#Option "KGAUniversal" # [<bool>]
Identifier "Card0"
Driver "vga"
VendorName "ATI Technologies Inc"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
EndSection
__________________________________
Do you Yahoo!?
Meet the all-new My Yahoo! - Try it today!
http://my.yahoo.com
More information about the freebsd-questions
mailing list