Exiscan+clamav
Peter Harmsen
pharmsen at horizon.nl
Mon Nov 15 22:39:35 PST 2004
Hello Ryan,
Are you sure the clamd deamon is running ?
On Mon, 15 Nov 2004 20:20:31 -0600
"Adam M Ryan" <adam at fastservers.net> wrote:
> Right now I am using Exim 4.43 and clamav-0.80_1 both installed from ports.
> I am trying to get clamav to scan incoming email. I have altered my exim
> configure file with the following:
>
> av_scanner=clamd:/var/run/clamav/clamd
>
>
>
> deny message = This message contains malware ($malware_name)
> demime = *
> malware = *
>
>
> I have also double checked everything in
> /usr/ports/mail/exim/files/POST-INSTALL-NOTES.clamd.
>
> But I still can't get my emailed scanned by clamav.
>
> Does anyone have a working configure file that they could post?
>
> Below is my version:
>
>
> Thanks!
>
> Adam
>
>
> -------------------------------------------------------
>
> ######################################################################
> # Runtime configuration file for Exim #
> ######################################################################
>
>
> # This is a default configuration file which will operate correctly in #
> uncomplicated installations. Please see the manual for a complete list # of
> all the runtime configuration options that can be included in a #
> configuration file. There are many more than are mentioned here. The #
> manual is in the file doc/spec.txt in the Exim distribution as a plain #
> ASCII file. Other formats (PostScript, Texinfo, HTML, PDF) are available #
> from the Exim ftp sites. The manual is also online at the Exim web sites.
>
>
> # This file is divided into several parts, all but the first of which are #
> headed by a line starting with the word "begin". Only those parts that # are
> required need to be present. Blank lines, and lines starting with # # are
> ignored.
>
>
> ########### IMPORTANT ########## IMPORTANT ########### IMPORTANT ###########
> # #
> # Whenever you change Exim's configuration file, you *must* remember to #
> # HUP the Exim daemon, because it will not pick up the new configuration #
> # until you do. However, any other Exim processes that are started, for #
> # example, a process started by an MUA in order to send a message, will #
> # see the new configuration as soon as it is in place. #
> # #
> # You do not need to HUP the daemon for changes in auxiliary files that #
> # are referenced from this file. They are read every time they are used. #
> # #
> # It is usually a good idea to test a new configuration for syntactic #
> # correctness before installing it (for example, by running the command #
> # "exim -C /config/file.new -bV"). #
> # #
> ########### IMPORTANT ########## IMPORTANT ########### IMPORTANT ###########
>
>
>
> ######################################################################
> # MAIN CONFIGURATION SETTINGS #
> ######################################################################
>
> # Specify your host's canonical name here. This should normally be the fully
> # qualified "official" name of your host. If this option is not set, the #
> uname() function is called to obtain the name. In many cases this does # the
> right thing and you need not set anything explicitly.
>
> # primary_hostname =
>
>
> # The next three settings create two lists of domains and one list of hosts.
> # These lists are referred to later in this configuration using the syntax #
> +local_domains, +relay_to_domains, and +relay_from_hosts, respectively. They
> # are all colon-separated lists:
>
> domainlist local_domains = @
> domainlist relay_to_domains =
> hostlist relay_from_hosts = localhost
>
> # Most straightforward access control requirements can be obtained by #
> appropriate settings of the above options. In more complicated situations,
> you # may need to modify the Access Control List (ACL) which appears later
> in this # file.
>
> # The first setting specifies your local domains, for example:
> #
> # domainlist local_domains = my.first.domain : my.second.domain
> #
> # You can use "@" to mean "the name of the local host", as in the default #
> setting above. This is the name that is specified by primary_hostname, # as
> specified above (or defaulted). If you do not want to do any local #
> deliveries, remove the "@" from the setting above. If you want to accept
> mail # addressed to your host's literal IP address, for example, mail
> addressed to # "user@[192.168.23.44]", you can add "@[]" as an item in the
> local domains # list. You also need to uncomment "allow_domain_literals"
> below. This is not # recommended for today's Internet.
>
> # The second setting specifies domains for which your host is an incoming
> relay.
> # If you are not doing any relaying, you should leave the list empty.
> However, # if your host is an MX backup or gateway of some kind for some
> domains, you # must set relay_to_domains to match those domains. For
> example:
> #
> # domainlist relay_to_domains = *.myco.com : my.friend.org # # This will
> allow any host to relay through your host to those domains.
> # See the section of the manual entitled "Control of relaying" for more #
> information.
>
> # The third setting specifies hosts that can use your host as an outgoing
> relay # to any other host on the Internet. Such a setting commonly refers to
> a # complete local network as well as the localhost. For example:
> #
> # hostlist relay_from_hosts = 127.0.0.1 : 192.168.0.0/16 # # The "/16" is a
> bit mask (CIDR notation), not a number of hosts. Note that you # have to
> include 127.0.0.1 if you want to allow processes on your host to send # SMTP
> mail by using the loopback address. A number of MUAs use this method of #
> sending mail.
>
>
> # All three of these lists may contain many different kinds of item,
> including # wildcarded names, regular expressions, and file lookups. See the
> reference # manual for details. The lists above are used in the access
> control list for # incoming messages. The name of this ACL is defined here:
>
> acl_smtp_rcpt = acl_check_rcpt
>
> # You should not change that setting until you understand how ACLs work.
>
> # The following ACL entries are used if you want to do content scanning with
> # the exiscan-acl patch. When you uncomment one of these lines, you must
> also # review the respective entries in the ACL section further below.
>
> # acl_smtp_mime = acl_check_mime
> # acl_smtp_data = acl_check_content
>
> # This configuration variable defines the virus scanner that is used with #
> the 'malware' ACL condition of the exiscan acl-patch. If you do not use #
> virus scanning, leave it commented. Please read doc/exiscan-acl-readme.txt #
> for a list of supported scanners.
>
> av_scanner = av_scanner=clamd:/var/run/clamav/clamd
>
> # The following setting is only needed if you use the 'spam' ACL condition #
> of the exiscan-acl patch. It specifies on which host and port the
> SpamAssassin # "spamd" daemon is listening. If you do not use this
> condition, or you use # the default of "127.0.0.1 783", you can omit this
> option.
>
> # spamd_address = 127.0.0.1 783
>
> # Specify the domain you want to be added to all unqualified addresses #
> here. An unqualified address is one that does not contain an "@" character #
> followed by a domain. For example, "caesar at rome.example" is a fully
> qualified # address, but the string "caesar" (i.e. just a login name) is an
> unqualified # email address. Unqualified addresses are accepted only from
> local callers by # default. See the recipient_unqualified_hosts option if
> you want to permit # unqualified addresses from remote sources. If this
> option is not set, the # primary_hostname value is used for qualification.
>
> # qualify_domain =
>
>
> # If you want unqualified recipient addresses to be qualified with a
> different # domain to unqualified sender addresses, specify the recipient
> domain here.
> # If this option is not set, the qualify_domain value is used.
>
> # qualify_recipient =
>
>
> # The following line must be uncommented if you want Exim to recognize #
> addresses of the form "user@[10.11.12.13]" that is, with a "domain literal"
> # (an IP address) instead of a named domain. The RFCs still require this
> form, # but it makes little sense to permit mail to be sent to specific
> hosts by # their IP address in the modern Internet. This ancient format has
> been used # by those seeking to abuse hosts by using them for unwanted
> relaying. If you # really do want to support domain literals, uncomment the
> following line, and # see also the "domain_literal" router below.
>
> # allow_domain_literals
>
>
> # No deliveries will ever be run under the uids of these users (a colon- #
> separated list). An attempt to do so causes a panic error to be logged, and
> # the delivery to be deferred. This is a paranoic safety catch. There is an
> # even stronger safety catch in the form of the FIXED_NEVER_USERS setting #
> in the configuration for building Exim. The list of users that it specifies
> # is built into the binary, and cannot be changed. The option below just
> adds # additional users to the list. The default for FIXED_NEVER_USERS is
> "root", # but just to be absolutely sure, the default here is also "root".
>
> # Note that the default setting means you cannot deliver mail addressed to
> root # as if it were a normal user. This isn't usually a problem, as most
> sites have # an alias for root that redirects such mail to a human
> administrator.
>
> exim_user = mailnull
> exim_group = mail
> never_users = root
>
>
> # The setting below causes Exim to do a reverse DNS lookup on all incoming #
> IP calls, in order to get the true host name. If you feel this is too #
> expensive, you can specify the networks for which a lookup is done, or #
> remove the setting entirely.
>
> host_lookup = *
>
>
> # The settings below, which are actually the same as the defaults in the #
> code, cause Exim to make RFC 1413 (ident) callbacks for all incoming SMTP #
> calls. You can limit the hosts to which these calls are made, and/or change
> # the timeout that is used. If you set the timeout to zero, all RFC 1413
> calls # are disabled. RFC 1413 calls are cheap and can provide useful
> information # for tracing problem messages, but some hosts and firewalls
> have problems # with them. This can result in a timeout instead of an
> immediate refused # connection, leading to delays on starting up an SMTP
> session.
>
> rfc1413_hosts = *
> rfc1413_query_timeout = 30s
>
>
> # By default, Exim expects all envelope addresses to be fully qualified,
> that # is, they must contain both a local part and a domain. If you want to
> accept # unqualified addresses (just a local part) from certain hosts, you
> can specify # these hosts by setting one or both of # #
> sender_unqualified_hosts = # recipient_unqualified_hosts = # # to control
> sender and recipient addresses, respectively. When this is done, #
> unqualified addresses are qualified using the settings of qualify_domain #
> and/or qualify_recipient (see above).
>
>
> # If you want Exim to support the "percent hack" for certain domains, #
> uncomment the following line and provide a list of domains. The "percent #
> hack" is the feature by which mail addressed to x%y at z (where z is one of #
> the domains listed) is locally rerouted to x at y and sent on. If z is not one
> # of the "percent hack" domains, x%y is treated as an ordinary local part.
> This # hack is rarely needed nowadays; you should not enable it unless you
> are sure # that you really need it.
> #
> # percent_hack_domains =
> #
> # As well as setting this option you will also need to remove the test # for
> local parts containing % in the ACL definition below.
>
>
> # When Exim can neither deliver a message nor return it to sender, it
> "freezes"
> # the delivery error message (aka "bounce message"). There are also other #
> circumstances in which messages get frozen. They will stay on the queue for
> # ever unless one of the following options is set.
>
> # This option unfreezes frozen bounce messages after two days, tries # once
> more to deliver them, and ignores any delivery failures.
>
> ignore_bounce_errors_after = 2d
>
> # This option cancels (removes) frozen messages that are older than a week.
>
> timeout_frozen_after = 7d
>
>
>
> ######################################################################
> # ACL CONFIGURATION #
> # Specifies access control lists for incoming SMTP mail #
> ######################################################################
>
> begin acl
>
> # This access control list is used for every RCPT command in an incoming #
> SMTP message. The tests are run in order until the address is either #
> accepted or denied.
> acl_check_content:
>
> # Reject virus infested messages.
> deny message = This message contains malware ($malware_name)
> malware = *
>
> # Always add X-Spam-Score and X-Spam-Report headers, using SA system-wide
> settings
> # (user "nobody"), no matter if over threshold or not.
> warn message = X-Spam-Score: $spam_score ($spam_bar)
> spam = nobody:true
> warn message = X-Spam-Report: $spam_report
> spam = nobody:true
>
> # Add X-Spam-Flag if spam is over system-wide threshold
> warn message = X-Spam-Flag: YES
> spam = nobody
>
> # Reject spam messages with score over 10, using an extra condition.
> deny message = This message scored $spam_score points. Congratulations!
> spam = nobody:true
> condition = ${if >{$spam_score_int}{100}{1}{0}}
>
> # finally accept all the rest
> accept
>
>
>
>
> acl_check_rcpt:
>
> # Accept if the source is local SMTP (i.e. not over TCP/IP). We do this by
> # testing for an empty sending host field.
>
> accept hosts = :
>
>
> ############################################################################
> #
> # The following section of the ACL is concerned with local parts that
> contain
> # @ or % or ! or / or | or dots in unusual places.
> #
> # The characters other than dots are rarely found in genuine local parts,
> but
> # are often tried by people looking to circumvent relaying restrictions.
> # Therefore, although they are valid in local parts, these rules lock them
> # out, as a precaution.
> #
> # Empty components (two dots in a row) are not valid in RFC 2822, but Exim
> # allows them because they have been encountered. (Consider local parts
> # constructed as "firstinitial.secondinitial.familyname" when applied to
> # someone like me, who has no second initial.) However, a local part
> starting
> # with a dot or containing /../ can cause trouble if it is used as part of
> a
> # file name (e.g. for a mailing list). This is also true for local parts
> that
> # contain slashes. A pipe symbol can also be troublesome if the local part
> is
> # incorporated unthinkingly into a shell command line.
> #
> # Two different rules are used. The first one is stricter, and is applied
> to
> # messages that are addressed to one of the local domains handled by this
> # host. It blocks local parts that begin with a dot or contain @ % ! / or
> |.
> # If you have local accounts that include these characters, you will have
> to
> # modify this rule.
>
> deny message = Restricted characters in address
> domains = +local_domains
> local_parts = ^[.] : ^.*[@%!/|]
>
> # The second rule applies to all other domains, and is less strict. This
> # allows your own users to send outgoing messages to sites that use
> slashes
> # and vertical bars in their local parts. It blocks local parts that begin
> # with a dot, slash, or vertical bar, but allows these characters within
> the
> # local part. However, the sequence /../ is barred. The use of @ % and !
> is
> # blocked, as before. The motivation here is to prevent your users (or
> # your users' viruses) from mounting certain kinds of attack on remote
> sites.
>
> deny message = Restricted characters in address
> domains = !+local_domains
> local_parts = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
>
> ############################################################################
> #
>
> # Accept mail to postmaster in any local domain, regardless of the source,
> # and without verifying the sender.
>
> accept local_parts = postmaster
> domains = +local_domains
>
> # Deny unless the sender address can be verified.
>
> require verify = sender
>
>
> ############################################################################
> #
> # There are no checks on DNS "black" lists because the domains that
> contain
> # these lists are changing all the time. However, here are two examples of
> # how you could get Exim to perform a DNS black list lookup at this point.
> # The first one denies, while the second just warns.
> #
> # deny message = rejected because $sender_host_address is in a
> black list at $dnslist_domain\n$dnslist_text
> # dnslists = black.list.example
> #
> # warn message = X-Warning: $sender_host_address is in a black
> list at $dnslist_domain
> # log_message = found in $dnslist_domain
> # dnslists = black.list.example
>
> ############################################################################
> #
>
> # Accept if the address is in a local domain, but only if the recipient
> can
> # be verified. Otherwise deny. The "endpass" line is the border between
> # passing on to the next ACL statement (if tests above it fail) or denying
> # access (if tests below it fail).
>
>
> accept domains = +local_domains
> endpass
> verify = recipient
>
> # Accept if the address is in a domain for which we are relaying, but
> again,
> # only if the recipient can be verified.
>
> accept domains = +relay_to_domains
> endpass
> verify = recipient
>
> # If control reaches this point, the domain is neither in +local_domains
> # nor in +relay_to_domains.
>
> # Accept if the message comes from one of the hosts for which we are an
> # outgoing relay. Recipient verification is omitted here, because in many
> # cases the clients are dumb MUAs that don't cope well with SMTP error
> # responses. If you are actually relaying out from MTAs, you should
> probably
> # add recipient verification here.
>
> accept hosts = +relay_from_hosts
>
> # Accept if the message arrived over an authenticated connection, from
> # any host. Again, these messages are usually from MUAs, so recipient
> # verification is omitted.
>
> accept authenticated = *
>
> # Reaching the end of the ACL causes a "deny", but we might as well give
> # an explicit message.
>
> deny message = relay not permitted
>
>
> # These access control lists are used for content scanning with the
> exiscan-acl # patch. You must also uncomment the entries for acl_smtp_data
> and acl_smtp_mime # (scroll up), otherwise the ACLs will not be used.
> IMPORTANT: the default entries here # should be treated as EXAMPLES. You
> MUST read the file doc/exiscan-acl-spec.txt # to fully understand what you
> are doing ...
>
> acl_check_mime:
>
> # Decode MIME parts to disk. This will support virus scanners later.
> warn decode = default
>
> # File extension filtering.
> deny message = Blacklisted file extension detected
> condition = ${if match \
> {${lc:$mime_filename}} \
> {\N(\.exe|\.pif|\.bat|\.scr|\.lnk|\.com)$\N} \
> {1}{0}}
>
> # Reject messages that carry chinese character sets.
> # WARNING: This is an EXAMPLE.
> deny message = Sorry, noone speaks chinese here
> condition = ${if eq{$mime_charset}{gb2312}{1}{0}}
>
> accept
>
>
>
> ######################################################################
> # ROUTERS CONFIGURATION #
> # Specifies how addresses are handled #
> ######################################################################
> # THE ORDER IN WHICH THE ROUTERS ARE DEFINED IS IMPORTANT! #
> # An address is passed to each router in turn until it is accepted. #
> ######################################################################
>
> begin routers
>
> # This router routes to remote hosts over SMTP by explicit IP address, #
> when an email address is given in "domain literal" form, for example, #
> <user@[192.168.35.64]>. The RFCs require this facility. However, it is #
> little-known these days, and has been exploited by evil people seeking # to
> abuse SMTP relays. Consequently it is commented out in the default #
> configuration. If you uncomment this router, you also need to uncomment #
> allow_domain_literals above, so that Exim can recognize the syntax of #
> domain literal addresses.
>
> # domain_literal:
> # driver = ipliteral
> # domains = ! +local_domains
> # transport = remote_smtp
>
>
> # This router routes addresses that are not in local domains by doing a DNS
> # lookup on the domain name. Any domain that resolves to 0.0.0.0 or to a #
> loopback interface address (127.0.0.0/8) is treated as if it had no DNS #
> entry. Note that 0.0.0.0 is the same as 0.0.0.0/32, which is commonly
> treated # as the local host inside the network stack. It is not 0.0.0.0/0,
> the default # route. If the DNS lookup fails, no further routers are tried
> because of # the no_more setting, and consequently the address is
> unrouteable.
>
> dnslookup:
> driver = dnslookup
> domains = ! +local_domains
> transport = remote_smtp
> ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8
> no_more
>
>
> # The remaining routers handle addresses in the local domain(s).
>
>
> # This router handles aliasing using a linearly searched alias file with the
> # name /etc/aliases. When this configuration is installed automatically, #
> the name gets inserted into this file from whatever is set in Exim's #
> build-time configuration. The default path is the traditional /etc/aliases.
> # If you install this configuration by hand, you need to specify the correct
> # path in the "data" setting below.
> #
> ##### NB You must ensure that the alias file exists. It used to be the case
> ##### NB that every Unix had that file, because it was the Sendmail
> default.
> ##### NB These days, there are systems that don't have it. Your aliases
> ##### NB file should at least contain an alias for "postmaster".
> #
> # If any of your aliases expand to pipes or files, you will need to set # up
> a user and a group for these deliveries to run under. You can do # this by
> uncommenting the "user" option below (changing the user name # as
> appropriate) and adding a "group" option if necessary. Alternatively, you #
> can specify "user" on the transports that are used. Note that the transports
> # listed below are the same as are used for .forward files; you might want #
> to set up different ones for pipe and file deliveries from aliases.
>
> system_aliases:
> driver = redirect
> allow_fail
> allow_defer
> data = ${lookup{$local_part}lsearch{/etc/aliases}}
> user = mailnull
> group = mail
> file_transport = address_file
> pipe_transport = address_pipe
>
>
> # This router handles forwarding using traditional .forward files in users'
> # home directories. If you want it also to allow mail filtering when a
> forward # file starts with the string "# Exim filter" or "# Sieve filter",
> uncomment # the "allow_filter" option.
>
> # If you want this router to treat local parts with suffixes introduced by
> "-"
> # or "+" characters as if the suffixes did not exist, uncomment the two
> local_ # part_suffix options. Then, for example, xxxx-foo at your.domain will
> be treated # in the same way as xxxx at your.domain by this router. You
> probably want to make # the same change to the localuser router.
>
> # The no_verify setting means that this router is skipped when Exim is #
> verifying addresses. Similarly, no_expn means that this router is skipped if
> # Exim is processing an EXPN command.
>
> # The check_ancestor option means that if the forward file generates an #
> address that is an ancestor of the current one, the current one gets #
> passed on instead. This covers the case where A is aliased to B and B # has
> a .forward file pointing to A.
>
> # The three transports specified at the end are those that are used when #
> forwarding generates a direct delivery to a file, or to a pipe, or sets # up
> an auto-reply, respectively.
>
> userforward:
> driver = redirect
> check_local_user
> # local_part_suffix = +* : -*
> # local_part_suffix_optional
> file = $home/.forward
> # allow_filter
> no_verify
> no_expn
> check_ancestor
> file_transport = address_file
> pipe_transport = address_pipe
> reply_transport = address_reply
> condition = ${if exists{$home/.forward} {yes} {no} }
>
>
> # This router matches local user mailboxes. If the router fails, the error #
> message is "Unknown user".
>
> # If you want this router to treat local parts with suffixes introduced by
> "-"
> # or "+" characters as if the suffixes did not exist, uncomment the two
> local_ # part_suffix options. Then, for example, xxxx-foo at your.domain will
> be treated # in the same way as xxxx at your.domain by this router.
>
> localuser:
> driver = accept
> check_local_user
> # local_part_suffix = +* : -*
> # local_part_suffix_optional
> transport = local_delivery
> cannot_route_message = Unknown user
>
>
>
> ######################################################################
> # TRANSPORTS CONFIGURATION #
> ######################################################################
> # ORDER DOES NOT MATTER #
> # Only one appropriate transport is called for each delivery. #
> ######################################################################
>
> # A transport is used only when referenced from a router that successfully #
> handles an address.
>
> begin transports
>
>
> # This transport is used for delivering messages over SMTP connections.
>
> remote_smtp:
> driver = smtp
>
>
> # This transport is used for local delivery to user mailboxes in traditional
> # BSD mailbox format. By default it will be run under the uid and gid of the
> # local user, and requires the sticky bit to be set on the /var/mail
> directory.
> # Some systems use the alternative approach of running mail deliveries under
> a # particular group instead of using the sticky bit. The commented options
> below # show how this can be done.
>
> local_delivery:
> driver = appendfile
> file = /var/mail/$local_part
> delivery_date_add
> envelope_to_add
> return_path_add
> group = mail
> user = $local_part
> mode = 0660
> no_mode_fail_narrower
>
>
> # This transport is used for handling pipe deliveries generated by alias or
> # .forward files. If the pipe generates any standard output, it is returned
> # to the sender of the message as a delivery error. Set return_fail_output #
> instead of return_output if you want this to happen only when the pipe fails
> # to complete normally. You can set different transports for aliases and #
> forwards if you want to - see the references to address_pipe in the routers
> # section above.
>
> address_pipe:
> driver = pipe
> return_output
>
>
> # This transport is used for handling deliveries directly to files that are
> # generated by aliasing or forwarding.
>
> address_file:
> driver = appendfile
> delivery_date_add
> envelope_to_add
> return_path_add
>
>
> # This transport is used for handling autoreplies generated by the filtering
> # option of the userforward router.
>
> address_reply:
> driver = autoreply
>
>
>
> ######################################################################
> # RETRY CONFIGURATION #
> ######################################################################
>
> begin retry
>
> # This single retry rule applies to all domains and all errors. It specifies
> # retries every 15 minutes for 2 hours, then increasing retry intervals, #
> starting at 1 hour and increasing each time by a factor of 1.5, up to 16 #
> hours, then retries every 6 hours until 4 days have passed since the first #
> failed delivery.
>
> # Address or Domain Error Retries
> # ----------------- ----- -------
>
> * * F,2h,15m; G,16h,1h,1.5; F,4d,6h
>
>
>
> ######################################################################
> # REWRITE CONFIGURATION #
> ######################################################################
>
> # There are no rewriting specifications in this default configuration file.
>
> begin rewrite
>
>
>
> ######################################################################
> # AUTHENTICATION CONFIGURATION #
> ######################################################################
>
> # There are no authenticator specifications in this default configuration
> file.
>
> begin authenticators
>
>
>
> ######################################################################
> # CONFIGURATION FOR local_scan() #
> ######################################################################
>
> # If you have built Exim to include a local_scan() function that contains #
> tables for private options, you can define those options here. Remember to #
> uncomment the "begin" line. It is commented by default because it provokes #
> an error with Exim binaries that are not built with LOCAL_SCAN_HAS_OPTIONS #
> set in the Local/Makefile.
>
> # begin local_scan
>
>
> # End of Exim configuration file
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
More information about the freebsd-questions
mailing list