Will a SD card reader solve this problem?
Murray Taylor
murraytaylor at bytecraftsystems.com
Wed Nov 10 18:41:04 PST 2004
On Thu, 2004-11-11 at 10:43, Greg 'groggy' Lehey wrote:
> On Wednesday, 10 November 2004 at 8:58:27 -0500, Ada Cheng wrote:
> > Good morning,
> > I am trying to connect my Minolta Z2 camera with my box, currently
> > running 4.10 stable.
> >
> > ...
> >
> > After rebuilding the kernel and rebooting, I tested the configuration by
> > plugging in my camera. The following is the output of dmesg:
> > umass0: KONICA_MINOLTA DiMAGE Z2, rev 2.00/1.00, addr 2
> > umass0: BBB reset failed, TIMEOUT (this is repeated if I don't unplug the
> > camera)
>
> Hmm. Not good.
>
> > If I do a camcontrol devlist I obtain
> > <KMCA DiMAGE Z2 1.00> at scbus1 target 0 lun 0 (probe0)
> >
> > so I guess the camera is recognized but no device node was probed.
> >
> > I am also getting the following error when i do
> > $mount -t msdos -r /dev/da0s1c /camera
> > msdos: /dev/da0s1c: Device not configured
> > which I guess isn't too surprising.
> >
> > I have read various threads regarding this TIMEOUT failure error and
> > some has suggested doing some quirks with the src/sys/cam/scsi/scsi_da.c
> > file which I am not comfortable with doing.
>
> I'm in a similar (but not the same) situation with a Ricoh camera. I
> can understand your position.
>
> > Will a SD card reader solve this problem?
>
> Almost certainly. That's what I did.
>
> See http://www.lemis.com/grog/diary-nov2004.html#7 for more details.
>
> Greg
> --
> When replying to this message, please copy the original recipients.
> If you don't, I may ignore the reply or reply to the original recipients.
> For more information, see http://www.lemis.com/questions.html
> See complete headers for address and phone numbers.
>
I do have to tell my Olympus to go into disk mode after plugging
it into the USB hub, and then the USB connect messages appear.
Does your Minolta have a menu for USB 'activities' ?
The Olympus has
- disk (which starts the disk mode connection)
- print (which I havent tried yet)
- exit (which exits disk mode and disconnects)
Once mounted the files then appear under
/mnt/olympus/dir/dir/dp070041.jpg
/mnt/olympus/dir/dir/dp070042.jpg
etc
(cant remember what the two directories on the camera are)
olympus does this on connect
Nov 7 16:57:23 spyder /kernel: umass0: OLYMPUS u30D,S410D,u410D, rev
1.10/1.00, addr 3
Nov 7 16:57:23 spyder /kernel: da2 at umass-sim0 bus 0 target 0 lun 0
Nov 7 16:57:23 spyder /kernel: da2: <OLYMPUS u30D,S410D,u410D 1.00>
Removable Direct Access SCSI-2 device
Nov 7 16:57:23 spyder /kernel: da2: 650KB/s transfers
Nov 7 16:57:23 spyder /kernel: da2: 31MB (64000 512 byte sectors: 64H
32S/T 31C)
and this on disconnect
Nov 7 16:58:42 spyder /kernel: umass0: at uhub1 port 1 (addr 3)
disconnected
Nov 7 16:58:42 spyder /kernel: (da2:umass-sim0:0:0:0): lost device
Nov 7 16:58:42 spyder /kernel: (da2:umass-sim0:0:0:0): removing device
entry
Nov 7 16:58:42 spyder /kernel: umass0: detached
This is my /etc/fstab entry
#
# olympus camera on USB
/dev/da2s1 /mnt/olympus msdos ro,noauto 0 0
% uname -a
FreeBSD spyder.mjt.homeunix.net 4.9-STABLE FreeBSD 4.9-STABLE #0:
Sat Sep 4 15:11:09 EST 2004
root at spyder.mjt.homeunix.net:/usr/src/sys/compile/MJT i386
and these are the USB lines from the MJT configuration file in
/sys/i396/conf/MJT
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus
# and da
device ums # Mouse
device uscanner # Scanners
device urio # Diamond Rio MP3 Player
device ucom # USB com devices
HTH as a guide to places to investigate.
--
Murray Taylor
Special Projects Engineer
---------------------------------
Bytecraft Systems & Entertainment
P: +61 3 8710 2555
F: +61 3 8710 2599
D: +61 3 9238 4275
M: +61 417 319 256
E: murraytaylor at bytecraftsystems.com
or visit us on the web
http://www.bytecraftsystems.com
http://www.bytecraftentertainment.com
---------------------------------------------------------------
The information transmitted in this e-mail is for the exclusive
use of the intended addressee and may contain confidential
and/or privileged material. Any review, re-transmission,
dissemination or other use of it, or the taking of any action
in reliance upon this information by persons and/or entities
other than the intended recipient is prohibited. If you
received this in error, please inform the sender and/or
addressee immediately and delete the material.
E-mails may not be secure, may contain computer viruses and
may be corrupted in transmission. Please carefully check this
e-mail (and any attachment) accordingly. No warranties are
given and no liability is accepted for any loss or damage
caused by such matters.
---------------------------------------------------------------
****************************************************************
This Email has been scanned for Viruses by MailMarshal.
****************************************************************
More information about the freebsd-questions
mailing list