External USB 2.0 Hard Drive and FreeBSD 5.2 troubles...

[scott renna]

Hello all, was doing a bit of work trying to figure
out a problem I'm having but cannot get it yet.  I
have an external USB 2.0 3.5 inch drive case and a
Western Digital Drive inside of it.  The box does not
boot when the USB drive is in, but when I plug it in
once started, here's what /var/log/messages shows:


Nov  8 20:50:37 pluto kernel: umass0: Cypress
Semiconductor USB2.0 Storage Device, rev 2.00/0.01,
addr 2
Nov  8 20:50:37 pluto kernel: umass0: Get Max Lun not
supported (STALLED)
Nov  8 20:50:37 pluto kernel: GEOM: create disk da0
dp=0xc478f450
Nov  8 20:50:37 pluto kernel: da0 at umass-sim0 bus 0
target 0 lun 0
Nov  8 20:50:37 pluto kernel: da0: <WDC WD16
00JB-00GVA0 \0000\0000> Fixed Direct Access SCSI-0 de
vice
Nov  8 20:50:37 pluto kernel: da0: 1.000MB/s transfers
Nov  8 20:50:37 pluto kernel: da0: 152627MB (312581808
512 byte sectors: 255H 63S/T 19457C) 

Obviously there is somethign wrong here.  Here's the
output of my camcontrol :

pluto# camcontrol devlist -v
scbus0 on umass-sim0 bus 0:
<WDC WD16 00JB-00GVA0 \0000\0000>  at scbus0 target 0
lun 0 (da0,pass0)
scbus-1 on xpt0 bus 0:
<  >                               at scbus-1 target
-1 lun -1 (xpt0)

I'm not sure what else I can do.  Anyone have any
tips?

Thanks,

Scott


		
__________________________________ 
Do you Yahoo!? 
Check out the new Yahoo! Front Page. 
www.yahoo.com