vinum primary master drive inconsistencies
Greg 'groggy' Lehey
grog at FreeBSD.org
Thu May 27 16:02:41 PDT 2004
On Thursday, 27 May 2004 at 13:12:34 -0400, dave wrote:
> I've got vinum running on 5.2.1 doing raid1 on two ide drives. I was doing a
> installworld in single user mode when it crashed. I was unable to use any
> commands because of missing libraries not installed. I unplugged the master
> drive, therew in a spare drive as master then did a minimum 5.2.1 install on
> that. Then mounted my slave drive on the tempoary master drive and copied
> the libraries. Once that was done i unplugged the temp drive and let the
> secondary master drive boot which it did, went in to single user mode and
> completed the make installworld and mergemaster. Now my secondary master
> drive has the correct data, the primary does not. When i boot i'm getting:
> vinum: home.p0.s0 is stale by force
> vinum: usr.p0.s0 is stale by force
> I'm assuming this means it can't find ad0 which is because i haven't
> reconnected it. My problem is both drives are bootable, but if i plug in the
> primary master drive fbsd will boot off that and it won't work. I need to be
> able to boot off the secondary master drive then copy the data from the
> secondary master drive to the now inconsistent primary master drive, then
> reboot and all should be normal.
> Not sure how to go about this, any advice appreciated.
The standard FAQ: http://www.vinumvm.org/vinum/how-to-debug.html
Note: I discard all HTML mail unseen.
Finger grog at FreeBSD.org for PGP public key.
See complete headers for address and phone numbers.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Size: 187 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-questions/attachments/20040528/c7254da2/attachment.bin
More information about the freebsd-questions