Enabling USB ports for...stuff/printing...
lists at battleface.com
lists at battleface.com
Tue Mar 23 20:54:49 PST 2004
Running 4.9-STABLE, CUPS 1.1.19 and I'm trying to get an Epson Photo
Stylus 1270 (usb) working with the system and CUPS. So far, no luck.
I've walked through the setup for CUPS via http://127.0.0.1:631/. I'm
at a loss to figure this out. What am I missing? Here's what I have.
% ls /dev/ulpt*
crw------- 1 root wheel 113, 0 Mar 23 08:16 /dev/ulpt0
crw------- 1 root wheel 113, 1 Mar 23 08:16 /dev/ulpt1
crw------- 1 root wheel 113, 2 Mar 23 08:16 /dev/ulpt2
crw------- 1 root wheel 113, 3 Mar 23 08:16 /dev/ulpt3
crw------- 1 root wheel 113, 4 Mar 23 08:16 /dev/ulpt4
% usbdevs -v
Controller /dev/usb0:
addr 1: self powered, config 1, OHCI root hub(0x0000), AMD(0x0000), rev
1.00
port 1 disabled
port 2 disabled
port 3 disabled
port 4 disabled
% usbdevs -f /dev/ulpt0
usbdevs: /dev/ulpt0: Device not configured
My kernel configuration contains the following for usb:
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and
da (done)
device ums # Mouse
device uscanner # Scanners
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Alexander Sendzimir (owner) 802 863 5502
MacTutor: Apple Mac OS X Consulting info at mactutor.biz
More information about the freebsd-questions
mailing list