Once again floppy mounting problem

[Peter Risdon]

Robert Golovniov wrote:

>On Tuesday, March 2, 2004, 10:55:12 AM, Peter Risdon wrote:
>
>  
>
>>> I  tried  to  mount my floppy drive, but it turned out that I do not
>>> have  the  device  named  "fd0" at all. I do have "fd" though. Did I
>>> miss something?
>>>
>>>      
>>>
>PR> Please show your dmesg (/var/run/dmesg.boot).
>
>Attached.
>
>  
>
You have some problems here:

...
fdc0: cmd 3 failed at out byte 1 of 3

(repeated)

...

fdc0: cannot reserve I/O port range (6 ports)


Is the floppy hardware OK?

PWR.


FreeBSD 5.2-RELEASE #3: Mon Mar 1 21:01:23 EET 2004

Preloaded elf kernel "/boot/kernel/kernel" at 0xc0831000.

Preloaded elf module "/boot/kernel/acpi.ko" at 0xc083126c.

ACPI APIC Table: <AMIINT INTEL845>

Timecounter "i8254" frequency 1193182 Hz quality 0

CPU: Intel(R) Celeron(R) CPU 1.80GHz (1804.10-MHz 686-class CPU)

Origin = "GenuineIntel" Id = 0xf13 Stepping = 3

Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>

real memory = 536805376 (511 MB)

avail memory = 511770624 (488 MB)

ioapic0 <Version 2.0> irqs 0-23 on motherboard

Pentium Pro MTRR support enabled

npx0: [FAST]

npx0: <math processor> on motherboard

npx0: INT 16 interface

acpi0: <AMIINT INTEL845> on motherboard

pcibios: BIOS version 2.10

Using $PIR table, 12 entries at 0xc00f7810

acpi0: Power Button (fixed)

Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000

acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0

acpi_cpu0: <CPU> port 0x530-0x537 on acpi0

acpi_cpu1: <CPU> port 0x530-0x537 on acpi0

device_probe_and_attach: acpi_cpu1 attach returned 6

acpi_button0: <Power Button> on acpi0

pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0

pci0: <ACPI PCI bus> on pcib0

agp0: <Intel Generic host to PCI bridge> mem 0xe0000000-0xe7ffffff at 
device 0.0 on pci0

pcib1: <PCI-PCI bridge> at device 1.0 on pci0

pci1: <PCI bus> on pcib1

pcib1: slot 0 INTA is routed to irq 16

pci1: <display, VGA> at device 0.0 (no driver attached)

uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe400-0xe41f 
irq 16 at device 29.0 on pci0

usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0

usb0: USB revision 1.0

uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1

uhub0: 2 ports with 2 removable, self powered

uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe800-0xe81f 
irq 19 at device 29.1 on pci0

usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1

usb1: USB revision 1.0

uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1

uhub1: 2 ports with 2 removable, self powered

umass0: Generic USB Storage Device, rev 1.10/1.00, addr 2

uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f 
irq 18 at device 29.2 on pci0

usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2

usb2: USB revision 1.0

uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1

uhub2: 2 ports with 2 removable, self powered

pci0: <serial bus, USB> at device 29.7 (no driver attached)

pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0

pci2: <ACPI PCI bus> on pcib2

rl0: <RealTek 8139 10/100BaseTX> port 0xcc00-0xccff mem 
0xdfefff00-0xdfefffff irq 17 at device 1.0 on pci2

rl0: Ethernet address: 00:02:44:3f:84:fa

miibus0: <MII bus> on rl0

rlphy0: <RealTek internal media interface> on miibus0

rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xc800-0xc8ff mem 
0xdfeffe00-0xdfeffeff irq 18 at device 2.0 on pci2

vr0: Ethernet address: 00:40:f4:73:dd:9f

miibus1: <MII bus> on vr0

ukphy0: <Generic IEEE 802.3u media interface> on miibus1

ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

isab0: <PCI-ISA bridge> at device 31.0 on pci0

isa0: <ISA bus> on isab0

atapci0: <Intel ICH4 UDMA100 controller> port 
0xfc00-0xfc0f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0

ata0: at 0x1f0 irq 14 on atapci0

ata0: [MPSAFE]

ata1: at 0x170 irq 15 on atapci0

ata1: [MPSAFE]

pci0: <serial bus, SMBus> at device 31.3 (no driver attached)

pcm0: <Intel ICH4 (82801DB)> port 0xdc00-0xdc3f,0xe000-0xe0ff mem 
0xdffff900-0xdffff9ff,0xdffffa00-0xdffffbff irq 17 at device 31.5 on pci0

pcm0: <Avance Logic ALC650 AC97 Codec>

atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0

atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0

kbd0 at atkbd0

psm0: <PS/2 Mouse> irq 12 on atkbdc0

psm0: model IntelliMouse, device ID 3

fdc0: cmd 3 failed at out byte 1 of 3

sio0 port 0x3f8-0x3ff irq 4 on acpi0

sio0: type 16550A

sio1 port 0x2f8-0x2ff irq 3 on acpi0

sio1: type 16550A

ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0

ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode

ppc0: FIFO with 16/16/9 bytes threshold

ppbus0: <Parallel port bus> on ppc0

plip0: <PLIP network interface> on ppbus0

lpt0: <Printer> on ppbus0

lpt0: Interrupt-driven port

ppi0: <Parallel I/O> on ppbus0

acpi_cpu1: <CPU> port 0x530-0x537 on acpi0

device_probe_and_attach: acpi_cpu1 attach returned 6

fdc0: cmd 3 failed at out byte 1 of 3

orm0: <Option ROM> at iomem 0xe0000-0xe0fff on isa0

pmtimer0 on isa0

fdc0: cannot reserve I/O port range (6 ports)

sc0: <System console> at flags 0x100 on isa0

sc0: VGA <16 virtual consoles, flags=0x300>

vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

Timecounter "TSC" frequency 1804101976 Hz quality 800

Timecounters tick every 10.000 msec

ipfw2 initialized, divert disabled, rule-based forwarding enabled, 
default to accept, logging disabled

acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%

GEOM: create disk ad0 dp=0xc4814e60

ad0: 57277MB <SAMSUNG SP0612N> [116374/16/63] at ata0-master UDMA100

acd0: DVDROM <HL-DT-STDVD-ROM GDR8161B> at ata1-master PIO4

acd1: CDRW <HL-DT-ST GCE-8523B> at ata1-slave PIO4

GEOM: create disk da0 dp=0xc48f6850

GEOM: create disk da1 dp=0xc48f7050

GEOM: create disk da2 dp=0xc48f7450

GEOM: create disk da3 dp=0xc48f7850

da0 at umass-sim0 bus 0 target 0 lun 0

da0: <IC USB Storage-CFC 301b> Removable Direct Access SCSI-0 device

da0: 1.000MB/s transfers

da0: Attempt to query device size failed: NOT READY, Medium not present

da1 at umass-sim0 bus 0 target 0 lun 1

da1: <IC USB Storage-SMC 301b> Removable Direct Access SCSI-0 device

da1: 1.000MB/s transfers

da1: Attempt to query device size failed: NOT READY, Medium not present

da2 at umass-sim0 bus 0 target 0 lun 2

da2: <IC USB Storage-MMC 301b> Removable Direct Access SCSI-0 device

da2: 1.000MB/s transfers

da2: Attempt to query device size failed: NOT READY, Medium not present

da3 at umass-sim0 bus 0 target 0 lun 3

da3: <IC USB Storage-MSC 301b> Removable Direct Access SCSI-0 device

da3: 1.000MB/s transfers

da3: Attempt to query device size failed: NOT READY, Medium not present

(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0

(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error

(da0:umass-sim0:0:0:0): SCSI Status: Check Condition

(da0:umass-sim0:0:0:0): NOT READY asc:3a,0

(da0:umass-sim0:0:0:0): Medium not present

(da0:umass-sim0:0:0:0): Unretryable error

Opened disk da0 -> 6

(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0

(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error

(da0:umass-sim0:0:0:0): SCSI Status: Check Condition

(da0:umass-sim0:0:0:0): NOT READY asc:3a,0

(da0:umass-sim0:0:0:0): Medium not present

(da0:umass-sim0:0:0:0): Unretryable error

Opened disk da0 -> 6

(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0

(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error

(da1:umass-sim0:0:0:1): SCSI Status: Check Condition

(da1:umass-sim0:0:0:1): NOT READY asc:3a,0

(da1:umass-sim0:0:0:1): Medium not present

(da1:umass-sim0:0:0:1): Unretryable error

Opened disk da1 -> 6

(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0

(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error

(da1:umass-sim0:0:0:1): SCSI Status: Check Condition

(da1:umass-sim0:0:0:1): NOT READY asc:3a,0

(da1:umass-sim0:0:0:1): Medium not present

(da1:umass-sim0:0:0:1): Unretryable error

Opened disk da1 -> 6

(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0

(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error

(da2:umass-sim0:0:0:2): SCSI Status: Check Condition

(da2:umass-sim0:0:0:2): NOT READY asc:3a,0

(da2:umass-sim0:0:0:2): Medium not present

(da2:umass-sim0:0:0:2): Unretryable error

Opened disk da2 -> 6

(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0

(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error

(da2:umass-sim0:0:0:2): SCSI Status: Check Condition

(da2:umass-sim0:0:0:2): NOT READY asc:3a,0

(da2:umass-sim0:0:0:2): Medium not present

(da2:umass-sim0:0:0:2): Unretryable error

Opened disk da2 -> 6

(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0

(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error

(da3:umass-sim0:0:0:3): SCSI Status: Check Condition

(da3:umass-sim0:0:0:3): NOT READY asc:3a,0

(da3:umass-sim0:0:0:3): Medium not present

(da3:umass-sim0:0:0:3): Unretryable error

Opened disk da3 -> 6

(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0

(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error

(da3:umass-sim0:0:0:3): SCSI Status: Check Condition

(da3:umass-sim0:0:0:3): NOT READY asc:3a,0

(da3:umass-sim0:0:0:3): Medium not present

(da3:umass-sim0:0:0:3): Unretryable error

Opened disk da3 -> 6

Mounting root from ufs:/dev/ad0s3a