Kernel Lock up

alden.pierre alden.pierre at verizon.net
Thu Jul 22 22:01:30 PDT 2004


alden.pierre wrote:

>
> When it's time to compile the GENERIC kernel my system locks up, 
> forcing me to reboot.  Here is an output of dmesg.   I'm running 
> FreeBSD 4.10.  I also can provide an
> attachment of the compiling output.
>
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>   The Regents of the University of California. All rights reserved.
> FreeBSD 4.10-RELEASE #0: Tue May 25 22:47:12 GMT 2004
>  root at perseus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
> Timecounter "i8254"  frequency 1193182 Hz
> CPU: Intel Pentium III (1000.04-MHz 686-class CPU)
> Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
>
> Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> 
>
> real memory  = 603914240 (589760K bytes)
> avail memory = 581242880 (567620K bytes)
> Preloaded elf kernel "kernel" at 0xc0551000.
> Pentium Pro MTRR support enabled
> md0: Malloc disk
> Using $PIR table, 7 entries at 0xc00fde80
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 
> 0xe8000000-0xebffffff at device 0.0 on pci0
> pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 
> 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 10
> isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 
> 7.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 12 at device 
> 7.2 on pci0
> usb0: <VIA 83C572 USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
> uhub1: 4 ports with 4 removable, self powered
> ukbd0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/1
> kbd0 at ukbd0
> uhid0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/0
> ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 
> 1.10/3.00, addr 4, iclass 3/1
> ums0: 5 buttons and Z dir.
> uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 12 at device 
> 7.3 on pci0
> usb1: <VIA 83C572 USB controller> on uhci1
> usb1: USB revision 1.0
> uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4
> chip0: <VIA 82C686 AC97 Audio> port 
> 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 11 at device 7.5 on pci0
> rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem 
> 0xee000000-0xee0000ff irq 11 at device 15.0 on pci0
> rl0: Ethernet address: 00:c0:26:62:97:06
> miibus0: <MII bus> on rl0
> rlphy0: <RealTek internal media interface> on miibus0
> rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xd0000-0xd3fff on isa0
> pmtimer0 on isa0
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> ad0: 38166MB <ST340016A> [77545/16/63] at ata0-master UDMA100
> acd0: CD-RW <CREATIVE CD-RW RW1210E> at ata0-slave PIO4
> acd1: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-104S 0123> at 
> ata1-master PIO4
> Mounting root from ufs:/dev/ad0s1a
> WARNING: / was not properly dismounted
> uhub1: at uhub0 port 2 (addr 2) disconnected
> ukbd0: detached
> uhid0: detached
> ums0: detached
> uhub1: detached
> uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
> uhub1: 4 ports with 4 removable, self powered
> ukbd0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/1
> kbd0 at ukbd0
> uhid0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/0
> ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 
> 1.10/3.00, addr 4, iclass 3/1
> ums0: 5 buttons and Z dir.
>
>
> Thank You
> Alden Louis-Pierre
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to 
> "freebsd-questions-unsubscribe at freebsd.org"
>
nevermind, I manage to fix my problem.


Thank You
Alden Louis-Pierre


More information about the freebsd-questions mailing list