FreeBDS don't accept 4 networkcards

Thu Jan 29 14:12:08 PST 2004

>This doesn't exactly help identify the problem much either.

>How about including the dmesg output from bootup, and maybe the output
>from pciconf.  If the card isn't being detected you need to do some
>detective work to figure out where in the boot process things are going
>wrong.

>Is it not being seen at all on the pci bus?
>Is the kernel failing to recognise it for what it is?
>Is the device driver not probing/attaching the device?

>Determining these things will ultimately point to where the problem lies
>and hopefully identify the solution.

Nope I'm not a hardware man
Maybe somebody understand none0 at pci0:5:0 xxxxxxxxxxxxxx


Here's my pciconf -l

agp0 at pci0:0:0:  class=0x060000 card=0x80641043 chip=0x30991106 rev=0x00
hdr=0x00
pcib1 at pci0:1:0: class=0x060400 card=0x00000080 chip=0xb0991106 rev=0x00
hdr=0x01
none0 at pci0:5:0: class=0x040100 card=0x80e21043 chip=0x011113f6 rev=0x10
hdr=0x00
atapci0 at pci0:6:0:       class=0x010400 card=0x4d33105a chip=0x0d30105a
rev=0x02 hdr=0x00
rl0 at pci0:12:0:  class=0x020000 card=0x813910ec chip=0x813910ec rev=0x10
hdr=0x00
rl1 at pci0:15:0:  class=0x020000 card=0x813910ec chip=0x813910ec rev=0x10
hdr=0x00
rl2 at pci0:16:0:  class=0x020000 card=0x813910ec chip=0x813910ec rev=0x10
hdr=0x00
isab0 at pci0:17:0:        class=0x060100 card=0x80521043 chip=0x30741106
rev=0x00 hdr=0x00
atapci1 at pci0:17:1:      class=0x01018a card=0x00000000 chip=0x05711106
rev=0x06 hdr=0x00
uhci0 at pci0:17:2:        class=0x0c0300 card=0x12340925 chip=0x30381106
rev=0x1b hdr=0x00
uhci1 at pci0:17:3:        class=0x0c0300 card=0x12340925 chip=0x30381106
rev=0x1b hdr=0x00
uhci2 at pci0:17:4:        class=0x0c0300 card=0x12340925 chip=0x30381106
rev=0x1b hdr=0x00
none1 at pci1:0:0: class=0x030000 card=0x00881002 chip=0x475a1002 rev=0x3a
hdr=0x00

And a part dmesg, I don't have any clue
Thanks for looking anyway

pcib0: slot 12 INTA is routed to irq 12
pcib0: slot 15 INTA is routed to irq 10
pcib0: slot 16 INTA is routed to irq 12
pcib0: slot 17 INTD is routed to irq 12
pcib0: slot 17 INTD is routed to irq 12
pcib0: slot 17 INTD is routed to irq 12
agp0: <VIA Generic host to PCI bridge> mem 0xfc000000-0xfdffffff at device
0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <multimedia, audio> at device 5.0 (no driver attached)
atapci0: <Promise PDC20265 UDMA100 controller> port
0xa000-0xa03f,0xa400-0xa403,0xa800-0xa807,0xb000-0xb003,0xb400-0xb407 mem
0xf9800000-0xf981ffff irq 12 at device 6.0 on pci0
atapci0: [MPSAFE]
ata2: at 0xb400 on atapci0
ata2: [MPSAFE]
ata3: at 0xa800 on atapci0
ata3: [MPSAFE]
rl0: <RealTek 8139 10/100BaseTX> port 0x9800-0x98ff mem
0xf9000000-0xf90000ff irq 12 at device 12.0 on pci0
rl0: Ethernet address: 00:40:f4:6d:c7:d3
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: <RealTek 8139 10/100BaseTX> port 0x9400-0x94ff mem
0xf8800000-0xf88000ff irq 10 at device 15.0 on pci0
rl1: Ethernet address: 00:50:fc:6a:ab:ad
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl2: <RealTek 8139 10/100BaseTX> port 0x9000-0x90ff mem
0xf8000000-0xf80000ff irq 12 at device 16.0 on pci0
rl2: Ethernet address: 00:50:bf:d9:bf:4a
miibus2: <MII bus> on rl2
rlphy2: <RealTek internal media interface> on miibus2
rlphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <VIA 8233 UDMA100 controller> port 0x8800-0x880f at device 17.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 17.2 (no driver attached)
pci0: <serial bus, USB> at device 17.3 (no driver attached)
pci0: <serial bus, USB> at device 17.4 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3
f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
orm0: <Option ROMs> at iomem 0xc8000-0xcffff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1477361456 Hz quality 800
Timecounters tick every 10.000 msec
acd0: CDROM <ATAPI-CD ROM-DRIVE-56MAX> at ata0-slave PIO4
GEOM: create disk ad4 dp=0xc48e7c60
ad4: 57259MB <MAXTOR 6L060J3> [116336/16/63] at ata2-master UDMA100
GEOM: create disk ad6 dp=0xc48e7860
ad6: 57259MB <MAXTOR 6L060J3> [116336/16/63] at ata3-master UDMA100
GEOM: create disk ar0 dp=0xc47eb9e0
ar0: 57259MB <ATA RAID1 array> [7299/255/63] status: DEGRADED subdisks:
 disk0 READY on ad4 at ata2-master
 disk1 DOWN no device found for this disk
Mounting root from ufs:/dev/ar0s1a
uhci0: <VIA 83C572 USB controller> port 0x8400-0x841f irq 12 at device 17.2
on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x8000-0x801f irq 12 at device 17.3
on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0x7800-0x781f irq 12 at device 17.4
on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks, buffers remaining... 1 1
done
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RELEASE #3: Thu Jan 29 06:48:25 CET 2004
    root at home.wilbertoord.com:/usr/src/sys/i386/compile/WILBERTOORD
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09cd000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09cd21c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(TM) XP1700+ (1477.36-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2

Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory  = 536788992 (511 MB)
avail memory = 511746048 (488 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   A7V266-E> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00f1480
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 5 INTA is routed to irq 11
pcib0: slot 6 INTA is routed to irq 12
pcib0: slot 12 INTA is routed to irq 12
pcib0: slot 15 INTA is routed to irq 10
pcib0: slot 16 INTA is routed to irq 12
pcib0: slot 17 INTD is routed to irq 12
pcib0: slot 17 INTD is routed to irq 12
pcib0: slot 17 INTD is routed to irq 12
agp0: <VIA Generic host to PCI bridge> mem 0xfc000000-0xfdffffff at device
0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <multimedia, audio> at device 5.0 (no driver attached)
atapci0: <Promise PDC20265 UDMA100 controller> port
0xa000-0xa03f,0xa400-0xa403,0xa800-0xa807,0xb000-0xb003,0xb400-0xb407 mem
0xf9800000-0xf981ffff irq 12 at device 6.0 on pci0
atapci0: [MPSAFE]
ata2: at 0xb400 on atapci0
ata2: [MPSAFE]
ata3: at 0xa800 on atapci0
ata3: [MPSAFE]
rl0: <RealTek 8139 10/100BaseTX> port 0x9800-0x98ff mem
0xf9000000-0xf90000ff irq 12 at device 12.0 on pci0
rl0: Ethernet address: 00:40:f4:6d:c7:d3
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: <RealTek 8139 10/100BaseTX> port 0x9400-0x94ff mem
0xf8800000-0xf88000ff irq 10 at device 15.0 on pci0
rl1: Ethernet address: 00:50:fc:6a:ab:ad
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl2: <RealTek 8139 10/100BaseTX> port 0x9000-0x90ff mem
0xf8000000-0xf80000ff irq 12 at device 16.0 on pci0
rl2: Ethernet address: 00:50:bf:d9:bf:4a
miibus2: <MII bus> on rl2
rlphy2: <RealTek internal media interface> on miibus2
rlphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <VIA 8233 UDMA100 controller> port 0x8800-0x880f at device 17.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 17.2 (no driver attached)
pci0: <serial bus, USB> at device 17.3 (no driver attached)
pci0: <serial bus, USB> at device 17.4 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROMs> at iomem 0xc8000-0xcffff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1477361884 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default
to deny, logging unlimited
acd0: CDROM <ATAPI-CD ROM-DRIVE-56MAX> at ata0-slave PIO4
GEOM: create disk ad4 dp=0xc48e7b60
ad4: 57259MB <MAXTOR 6L060J3> [116336/16/63] at ata2-master UDMA100
GEOM: create disk ad6 dp=0xc48e7760
ad6: 57259MB <MAXTOR 6L060J3> [116336/16/63] at ata3-master UDMA100
GEOM: create disk ar0 dp=0xc47eb9e0
ar0: 57259MB <ATA RAID1 array> [7299/255/63] status: READY subdisks:
 disk0 READY on ad4 at ata2-master
 disk1 READY on ad6 at ata3-master
uhci0: <VIA 83C572 USB controller> port 0x8400-0x841f irq 12 at device 17.2
on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x8000-0x801f irq 12 at device 17.3
on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0x7800-0x781f irq 12 at device 17.4
on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered