Trouble booting 4.9 on Compaq DL360
Matt Reinhart
matt at antitheoretical.org
Fri Jan 23 07:58:56 PST 2004
> Which model of the Dl360 do you have?
>
> ida is normally used on the Generation 1, which is a completely white
> box, wheras the G2 has a black outfit, and uses the ciss driver.
> But I've never seen an G1 with 1266 MHz, or were those very late series?
>
It is a late G1 in a completely white outfit.
> As OSType in the Setup tool I set Win NT4, which is sometimes important
> for irq routing. I created a standard RAID 1 Volume, with no diag
> partition whatsoever involved, and then 4.7-R and 4.8-R installed
> without problems, I chose not to use bootmgr, but a standard mbr.
>
> worked right out of the box.
>
>
> Do you have a chance to try again with perhaps a 4.7-R disc?
I don't have a 4.7-R disc, but I haven't checked the BIOS setup. I'm
going to try using the "SmartStart" disc to access the setup tools and
set it to Win NT4.
Thanks for your help, Olaf.
-Matt
More information about the freebsd-questions
mailing list