cdrecord problems
Andrew Thomson
andrewjt at applecomm.net
Tue Jan 13 16:22:45 PST 2004
Just trying to write a cd under 5.2 but am having some issues. Relevant
output below.
Thoughts?
1,0,0 100) 'LG ' 'CD-ROM CRD-8400B' '1.04' Removable CD-ROM
1,1,0 101) 'CREATIVE' 'CD-RW RW1210E ' 'LCS6' Removable CD-ROM
# cdrecord -v -eject dev=1,1,0 5.2-RELEASE-i386-miniinst.iso
Cdrecord 2.00.3 (i386-unknown-freebsd5.2) Copyright (C) 1995-2002
J\xf6rg Schill
ing
TOC Type: 1 = CD-ROM
scsidev: '1,1,0'
scsibus: 1 target: 1 lun: 0
Using libscg version 'schily-0.7'
atapi: 0
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'CREATIVE'
Identifikation : 'CD-RW RW1210E '
Revision : 'LCS6'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96P RAW/R96R
Drive buf size : 1658880 = 1620 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 236 MB
Total size: 271 MB (26:55.60) = 121170 sectors
Lout start: 272 MB (26:57/45) = 121170 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11077 (97:34/23)
ATIP start of lead out: 359848 (79:59/73)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 238678
Starting to write CD/DVD at speed 12 in real TAO mode for single
session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Performing OPC...
cdrecord: Input/output error. send opc: scsi sendcmd: retryable error
CDB: 54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 0
0 00 00 00 00 00 00 00 00 00
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 60s
cdrecord: OPC failed.
Writing time: 4.456s
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
More information about the freebsd-questions
mailing list