D-Link DWL-520 won't initialize

[David Kelly]

On Aug 9, 2004, at 5:40 PM, David Kelly wrote:

> wi0: <Intersil Prism2.5> mem 0xfc000000-0xfc000fff irq 21 at device 
> 0.0 on pci2
> wi0: timeout in wi_cmd 0x0000; event status 0x0000
> wi0: wi_cmd: busy bit won't clear.
> : init failed
> device_probe_and_attach: wi0 attach returned 6

Update: exact same card on an Asus P2B PII-400 MHz machine with FreeBSD 
4.8-p-something produced much the same results above when I did 
"kldload if_wi". Difference was "attach returned 5" and the system 
locked hard.

Studying D-Link's site I now know I have a "version E" card, if that 
means anything. NT4 is the newest Microsoft product I have, and isn't 
supported by D-Link. The D-Link instructions say their software is to 
be installed before the hardware so I'm wondering if it has to be 
FLASH'ed or something?

--
David Kelly N4HHE, dkelly at HiWAAY.net
========================================================================
Whom computers would destroy, they must first drive mad.