digicam on ugen0
David L
dlodeiro at inspired.net.au
Sun Sep 21 02:43:55 PDT 2003
You should be able to mount it as you would a usb hard drive, these are
reffered to as USB mass storage. This is what I get when I connect my
panasonic digicam
da0: <MATSHITA DMC-LC20 > Removable Direct Access SCSI-2 device
da0: 1.000MB/s transfers
da0: 29MB (60801 512 byte sectors: 64H 32S/T 29C)
(da0:umass-sim0:0:0:0): READ(6)/WRITE(6) not supported, increasing
minimum_cmd_size to 10.
now if I look at my /dev directory I can see
da0
da0s1
Of course theres a lot more in my /dev/ directory but this is the only part
thatt is relevant.
I do this logged in as root, however it should be possible to do this whilst
logged in as user by putting an entry in /etc/fstab
# mount -t msdos /dev/da0s1 /mnt
# cd /mnt
# ls
DCIM P1010685.JPG P1010694.JPG P1010703.JPG P1010712.JPG
MISC P1010686.JPG P1010695.JPG P1010704.JPG P1010713.JPG
P1010678.JPG P1010687.JPG P1010696.JPG P1010705.JPG P1010714.JPG
P1010679.JPG P1010688.JPG P1010697.JPG P1010706.JPG P1010715.JPG
P1010680.JPG P1010689.JPG P1010698.JPG P1010707.JPG P1010716.JPG
P1010681.JPG P1010690.JPG P1010699.JPG P1010708.JPG P1010717.JPG
P1010682.JPG P1010691.JPG P1010700.JPG P1010709.JPG P1010718.JPG
P1010683.JPG P1010692.JPG P1010701.JPG P1010710.JPG ignore_my_docs
P1010684.JPG P1010693.JPG P1010702.JPG P1010711.JPG
#
There you go, that is my digital camera sd card contents
After looking in
http://www.teaser.fr/~hfiguiere/linux/digicam.html
it appears that your digital camera also uses the USB mass storage protocal,
Therefore your procedure shouild be very similar to mine.
Hope this helps
David L
> I plugged my digicam HP Photosmart 618 into my FreeBSD-4 and it was
> recognised immediately. Great. It's on /dev/ugen0
> But how can I access the camera- or rather the pictures on it?
More information about the freebsd-questions
mailing list