problem with aue card
Scott Mitchell
scott+freebsd at fishballoon.org
Thu Oct 9 09:49:10 PDT 2003
On Thu, Oct 09, 2003 at 03:23:15AM -0400, Alexey Koptsevich wrote:
>
> Hi,
>
> I have a problem with the network card Linksys USB100TX. The hardware
> itself is known to be working, but not under FreeBSD.
>
> Here is dmesg:
>
> Oct 8 21:10:39 pyosik kernel: aue0: LINKSYS Inc. LINKSYS USB Adapter, rev 1.10/1.01, addr 2
> Oct 8 21:10:40 pyosik kernel: aue0: Ethernet address: 00:e0:98:82:f3:e6
> Oct 8 21:10:40 pyosik kernel: miibus1: <MII bus> on aue0
> Oct 8 21:10:40 pyosik kernel: bmtphy0: <BCM5201 10/100baseTX PHY> on miibus1
> Oct 8 21:10:40 pyosik kernel: bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>
> After loading if_ep the interface appears in the output of ifconfig, but
> Oct 8 21:18:17 pyosik kernel: aue0: MII read timed out
>
> When I then try 'dhclient aue0', I get thousands of messages
> aue0: usb error on rx: IOERROR
>
> Any piece of advice how to make this card work would be appreciated.
Are you on a 100Mbps network? Our driver seems to have issues with this
device on such networks, although it seems to work fine on 10Mbps
connections.
Scott
--
===========================================================================
Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels
Cambridge, England | 0x54B171B9 | don't get sucked into jet engines"
scott at fishballoon.org | 0xAA775B8B | -- Anon
More information about the freebsd-questions
mailing list