Disklabel problem IBM SCSI3 disks, vinum too
Bob Collins
freebsd at anything-inc.com
Fri Nov 21 06:30:29 PST 2003
At 08:41 PM 11/19/2003, Greg 'groggy' Lehey wrote:
>[Format recovered--see http://www.lemis.com/email/email-format.html]
>
>Quotation broken.
>
>On Wednesday, 19 November 2003 at 9:13:43 -0500, Bob Collins wrote:
> > At 10:46 PM 11/17/2003, Greg 'groggy' Lehey wrote:
> >>
> >> Do you have device nodes for da4? Has it been labelled at all?
> >
> > I did not have `all' the nodes for da4 in /dev. So, I ran #sh MAKEDEV da4
> > in the /dev directory. After that, there were what appeared to be all the
> > device nodes for da4.
> >
> > I was able to label the drive and use it with vinum under 5.0-RELEASE FWIW.
> > Under 4.9-RELEASE (which is what I now run) it will not label through
> > /stand/sysinstall.
> >
> > I can now newfs the drive and mount it and copy files to and fro, however I
> > cannot use it with vinum. I did umount the drive and then disklabel -e da4
> > and changed the e: to h: and the filesystem type to vinum. It was da4s1e.
> >
> > When I create the vinum configuration, I either get that drive d (da4s1h)
> > is referenced and in the down state while the other three drives are up, or
> > the other three drives a b c are referenced and in the down state while
> > drive d is up.
>
>I need the information I ask for in
>http://www.vinumvm.org/vinum/how-to-debug.html.
>
>Greg
>--
>When replying to this message, please copy the original recipients.
>If you don't, I may ignore the reply or reply to the original recipients.
>For more information, see http://www.lemis.com/questions.html
>See complete headers for address and phone numbers.
FreeBSD 4.9 RELEASE
No changes to sources
vinum -> list
4 drives:
D d State: up Device /dev/da1s1h Avail:
0/8747 MB (0%)
D c State: up Device /dev/da2s1h Avail:
0/8747 MB (0%)
D b State: up Device /dev/da3s1h Avail:
0/8747 MB (0%)
D a State: up Device /dev/da4s1h Avail:
0/8747 MB (0%)
1 volumes:
V raid State: down Plexes: 1 Size: 25 GB
1 plexes:
P raid.p0 R5 State: init Subdisks: 4 Size: 25 GB
4 subdisks:
S raid.p0.s0 State: empty PO: 0 B Size: 8747 MB
S raid.p0.s1 State: empty PO: 512 kB Size: 8747 MB
S raid.p0.s2 State: empty PO: 1024 kB Size: 8747 MB
S raid.p0.s3 State: empty PO: 1536 kB Size: 8747 MB
18 Nov 2003 21:03:29.947426 *** vinum started ***
18 Nov 2003 21:03:29.948250 *** Created devices ***
18 Nov 2003 21:03:30.242946 create -f /etc/vinum.conf
# Vinum configuration of freebie, Wed Nov 13
drive /dev/a device /dev/da1s1h
drive /dev/b device /dev/da2s1h
drive /dev/c device /dev/da3s1h
drive /dev/d device /dev/da4s1h
volume raid
plex org raid5 512k
sd len 8747m drive /dev/a
sd len 8747m drive /dev/b
sd len 8747m drive /dev/c
sd len 8747m drive /dev/d
18 Nov 2003 21:03:30.407281 *** Created devices ***
18 Nov 2003 21:03:29.948250 *** Created devices ***
Nov 18 21:03:24 freebie /kernel: vinum: loaded
Nov 18 21:03:30 freebie /kernel: vinum: drive /dev/a is up
Nov 18 21:03:30 freebie /kernel: vinum: drive /dev/b is up
Nov 18 21:03:30 freebie /kernel: vinum: drive /dev/c is up
Nov 18 21:03:30 freebie /kernel: vinum: raid.p0.s3 is crashed
Nov 18 21:03:30 freebie /kernel: vinum: raid.p0 is initializing
Nov 18 21:03:24 freebie /kernel: vinum: loaded
Nov 18 21:03:30 freebie /kernel: vinum: drive /dev/a is up
Nov 18 21:03:30 freebie /kernel: vinum: drive /dev/b is up
Nov 18 21:03:30 freebie /kernel: vinum: drive /dev/c is up
Nov 18 21:03:30 freebie /kernel: vinum: raid.p0.s3 is crashed
Nov 18 21:03:30 freebie /kernel: vinum: raid.p0 is initializing
More information about the freebsd-questions
mailing list