MPD error writing len 27 frame to bypass: No route to host

[Eric Dahan]

Hi list,


I'm trying to establish a pptp tunnel with  MPD box V 3.13 under FreeBSD 
4.8-RC1 (ipf/ipnat are running on the same box) and Win XP Station.

I'm getting "
error writing len 27 frame to bypass: No route to host"


Any ideas what is actually going wrong?

Thanks.


FreeBSD 4.8-RC1 box: 1.1.1.1 (outside)
winXP Station :  outside : 2.2.2.2
Private net behind FreeBsd Box : 192.168.x.0/24

ipf: IP Filter: v3.4.31 (336)
Kernel: IP Filter: v3.4.31
Running: yes
Log Flags: 0 = none set
Default: block all, Logging: available
Active list: 0

mpd.conf

default:
         load pptp

pptp:
         new -i ng0 pptp pptp
         set iface disable on-demand
         set iface enable proxy-arp
         set iface addrs 1.1.1.1 192.168.x.200
         set iface route 192.168.x.200/32
         set bundle disable multilink
         set bundle authname "Name"
         set bundle password "Password"
         set bundle enable encryption
         set link yes acfcomp protocomp
         set link disable pap
         set link enable chap
         set link keep-alive 10 60
         set ipcp enable vjcomp
         set ipcp ranges 1.1.1.1/32 192.168.x.200/32
         set ipcp dns 3.3.3.3
         set bundle enable compression
         set ccp enable mppc
         set ccp enable mpp-e40
         set ccp enable mpp-e128
         set ccp yes mpp-stateless
         set bundle enable crypt-reqd



mpd.links

pptp:
         set link type pptp
         set pptp self 1.1.1.1
         set pptp enable incoming
         set pptp disable originate


Logs:

Multi-link PPP for FreeBSD, by Archie L. Cobbs.
Based on iij-ppp, by Toshiharu OHNO.
mpd: pid 4354, version 3.13 (root at freebsd.org 11:25 19-Apr-2003)
[pptp] ppp node is "mpd4354-pptp"
mpd: local IP address for PPTP is 1.1.1.1
[pptp] using interface ng0
[pptp:pptp] mpd: PPTP connection from 2.2.2.2:10131
pptp0: attached to connection with 2.2.2.2:10131
[pptp] IFACE: Open event
[pptp] IPCP: Open event
[pptp] IPCP: state change Initial --> Starting
[pptp] IPCP: LayerStart
[pptp] IPCP: Open event
[pptp] bundle: OPEN event in state CLOSED
[pptp] opening link "pptp"...
[pptp] link: OPEN event
[pptp] LCP: Open event
[pptp] LCP: state change Initial --> Starting
[pptp] LCP: LayerStart
[pptp] device: OPEN event in state DOWN
[pptp] attaching to peer's outgoing call
[pptp] device is now in state OPENING
[pptp] device: UP event in state OPENING
[pptp] device is now in state UP
[pptp] link: UP event
[pptp] link: origination is remote
[pptp] LCP: Up event
[pptp] LCP: state change Starting --> Req-Sent
[pptp] LCP: phase shift DEAD --> ESTABLISH
[pptp] LCP: SendConfigReq #1
  ACFCOMP
  PROTOCOMP
  MRU 1500
  MAGICNUM e11ec40e
  AUTHPROTO CHAP MSOFTv2
[pptp] error writing len 27 frame to bypass: No route to host
pptp0-0: ignoring SetLinkInfo
[pptp] LCP: SendConfigReq #2
  ACFCOMP
  PROTOCOMP
  MRU 1500
  MAGICNUM e11ec40e
  AUTHPROTO CHAP MSOFTv2
[pptp] error writing len 27 frame to bypass: No route to host
[pptp] LCP: SendConfigReq #3
  ACFCOMP
  PROTOCOMP
  MRU 1500
  MAGICNUM e11ec40e
  AUTHPROTO CHAP MSOFTv2
[pptp] LCP: SendConfigReq #4
  ACFCOMP
  PROTOCOMP
  MRU 1500
  MAGICNUM e11ec40e
  AUTHPROTO CHAP MSOFTv2
[pptp] LCP: SendConfigReq #5
  ACFCOMP
  PROTOCOMP
  MRU 1500
  MAGICNUM e11ec40e
  AUTHPROTO CHAP MSOFTv2
[pptp] LCP: SendConfigReq #6
  ACFCOMP
  PROTOCOMP
  MRU 1500
  MAGICNUM e11ec40e
  AUTHPROTO CHAP MSOFTv2
[pptp] LCP: SendConfigReq #7
  ACFCOMP
  PROTOCOMP
  MRU 1500
  MAGICNUM e11ec40e
  AUTHPROTO CHAP MSOFTv2
[pptp] LCP: SendConfigReq #8
  ACFCOMP
  PROTOCOMP
  MRU 1500
  MAGICNUM e11ec40e
  AUTHPROTO CHAP MSOFTv2
[pptp] LCP: SendConfigReq #9
  ACFCOMP
  PROTOCOMP
  MRU 1500
  MAGICNUM e11ec40e
  AUTHPROTO CHAP MSOFTv2
[pptp] LCP: SendConfigReq #10
  ACFCOMP
  PROTOCOMP
  MRU 1500
  MAGICNUM e11ec40e
  AUTHPROTO CHAP MSOFTv2
[pptp] LCP: state change Req-Sent --> Stopped
[pptp] LCP: LayerFinish
[pptp] LCP: parameter negotiation failed
[pptp] LCP: LayerFinish
[pptp] device: CLOSE event in state UP
pptp0-0: clearing call
pptp0-0: killing channel
[pptp] PPTP call terminated
[pptp] IFACE: Close event
[pptp] IPCP: Close event
[pptp] IPCP: state change Starting --> Initial
[pptp] IPCP: LayerFinish
[pptp] IFACE: Close event
pptp0: closing connection with 2.2.2.2:10131
[pptp] IFACE: Close event
[pptp] device is now in state CLOSING
[pptp] bundle: CLOSE event in state OPENED
[pptp] closing link "pptp"...
[pptp] device: CLOSE event in state CLOSING
[pptp] device is now in state CLOSING
[pptp] link: CLOSE event
[pptp] LCP: Close event
[pptp] LCP: state change Stopped --> Closed
[pptp] device: DOWN event in state CLOSING
[pptp] device is now in state DOWN
[pptp] link: DOWN event
[pptp] LCP: Down event
[pptp] LCP: state change Closed --> Initial
[pptp] LCP: phase shift ESTABLISH --> DEAD
[pptp] device: DOWN event in state DOWN
[pptp] device is now in state DOWN
[pptp] link: DOWN event
[pptp] LCP: Down event
pptp0: killing connection with 2.2.2.2:10131