getencstat and sesd - not working?

[Mike Maltese]

I have an Intel hot-swap SCSI enclosure that is supposed to be SAF-TE
compliant. It gets probed correctly as ses0 (relevant dmesg included below).
I built sesd and getencstat but both report "/dev/ses0: Device busy". I also
remade the device but the result is the same. Has anyone had any experience
with these two utilities?


ses0 at adw1 bus 0 target 6 lun 0
ses0: <ESG-SHV SCA HSBP M9 0.10> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device

Thanks, Mike