Firewire Drive Not Seen At Boot

[Drew Tomlinson]

I've installed a firewire drive and rebuilt my kernel with the necessary
options as indicated in LINT.  The strange thing is that my firewire
card and an unknown device are seen at boot but the actual disk (da2 on
my system) is not seen.  But if I unplug the firewire cable and then
plug it back in, it forces a bus reset and then my drive is detected as
da2.  Any ideas on how to fix?

Thanks,

Drew

My dmesg:

blacklamb# dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights
reserved.
FreeBSD 4.8-STABLE #2: Sun Jun 29 09:35:25 GMT 2003

tomlinson_dr at blacklamb.mykitchentable.net:/usr/obj/usr/src/sys/BLACKLAMB
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (601.37-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3

Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,
MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  = 201261056 (196544K bytes)
config> di pcic0
No such device: pcic0
Invalid command or syntax.  Type `?' for help.
config> di ata1
No such device: ata1
Invalid command or syntax.  Type `?' for help.
config> di ata0
No such device: ata0
Invalid command or syntax.  Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax.  Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax.  Type `?' for help.
config> q
avail memory = 192331776 (187824K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  1, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0357000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc035709c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00fdf10
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 18 -> irq 5
IOAPIC #0 intpin 17 -> irq 10
IOAPIC #0 intpin 16 -> irq 11
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GZ graphics accelerator> at 0.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1c90-0x1c9f at device 4.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1ca0-0x1cbf irq
2 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Timecounter "PIIX"  frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at
device 4.3 on pci0
ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0x1000-0x10ff mem
0xfc100000-0xfc100fff irq 5 at device 5.0 on pci0
ahc0: Using left over BIOS settings
aic7895C: Ultra Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7895 Ultra SCSI adapter> port 0x1400-0x14ff mem
0xfc101000-0xfc101fff irq 5 at device 5.1 on pci0
ahc1: Host Adapter Bios disabled.  Using default SCSI device parameters
aic7895C: Ultra Wide Channel B, SCSI Id=7, 32/253 SCBs
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port
0x1cc0-0x1cff mem 0xfc000000-0xfc0fffff,0xfc102000-0xfc102fff irq 2 at
device 6.0 on pci0
fxp0: Ethernet address 00:e0:18:c4:f4:5e
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x1800-0x18ff mem
0xfc103000-0xfc103fff irq 10 at device 9.0 on pci0
fwohci0: <VIA VT6306> port 0x1c00-0x1c7f mem 0xfc104000-0xfc1047ff irq
11 at device 10.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 8.
fwohci0: EUI64 00:40:63:00:00:00:07:ff
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:40:63:00:07:ff
sbp0: <SBP2/SCSI over firewire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc1, gen=1, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
pcib2: <DEC 21152 PCI-PCI bridge> at device 12.0 on pci0
pci2: <PCI bus> on pcib2
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcd7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
ad0: 76319MB <GENERIC GENERIC> [155061/16/63] at ata0-master UDMA33
ad1: 76319MB <WDC WD800AB-22CBA0> [155061/16/63] at ata0-slave UDMA33
acd0: CDROM <HITACHI CDR-8435> at ata1-master PIO4
Waiting 2 seconds for SCSI devices to settle
firewire0: New S400 device ID:00d04b0ce0100707
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE SX19171W 9D32> Fixed Direct Access SCSI-2 device
da0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing
Enabled
da0: 8683MB (17783112 512 byte sectors: 64H 32S/T 8683C)
da1 at ahc0 bus 0 target 2 lun 0
da1: <SEAGATE SX19171W 9D32> Fixed Direct Access SCSI-2 device
da1: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing
Enabled
da1: 8683MB (17783112 512 byte sectors: 64H 32S/T 8683C)

*** END OF BOOT ***

*** APPENDED TO DMESG AFTER UNPLUG/PLUG ***
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc1, gen=3, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc1, gen=4, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
da2 at sbp0 bus 0 target 0 lun 0
da2: <Oxford 911G 0135> Fixed Simplified Direct Access SCSI-4 device
da2: 50.000MB/s transfers, Tagged Queueing Enabled
da2: 76351MB (156368016 512 byte sectors: 255H 63S/T 9733C)