USB mouse/keyboard causes kernel panic during boot sequence

[Michael E. Mercer]

> > > There is one last thing you can do: put
> > > options DDB
> > > in your kernel config file. Recompile. Reproduce.
> > > ddb> trace
> > > ... <please capture all output>
> > > ddb> continue
> > > ...
> > > ddb> continue
> > > Uptime - 0s
> > > Rebooting...
> > > 
> > > -- Josh

Next time it involves this much typing... don't tell me... :P

uhci_idone(0,c2e17180,c2e18000,c2e17180,c0494d6c) at +0xc
uhci_waitintr(c2e18000,c2e17180,c2e17180,8,c0494d7c) at +0xb6
uhci_device_ctrl_start(c2e17180,0,c0494da4,c026f219,c2e17180) at +0x2c
uhci_device_ctrl_transfer(c2e,17180,0,c2e17180,c0494e0c,c026fc12) at
+0x1f
usbd_transfer(c2e17180,c0494dd4,c026fc1b,c2e17180,c2e17130) at +0xd1
usbd_sync_transfer(c2e17180,c2e17130,c2e17100,c2e17130,c2e0daf0) at
+0x10
usbd_request_flags(c2e17100,c0494e0c,c2e17130,0,0) at +0x5f
usbd_do_request(c2e17100,c0494e0c,c2e17130,c2e17100,0) at +0x18
usbd_get_desc(c2e17100,1,0,8,c2e17130) at +0x67
usbd_new_device(c2e17300,c2e18000,1,200,1,c2e17260) at +0x148
uhub_explore(c2e17480,c2e17500,c2e17c00,0,c0494ea0) at +0x2be
usb_attach(c2e17500,c0494ebc,c0186f0f,c2e17500,c2e18000) at +0x112
DEVICE_ATTACH(c2e17500,c2e18000,c2e17c00,0,1) at +0x2e
device_probe_and_attach(c2e17500) at +0x63
uhci_pci_attach(c2e17c00,c0494f08,c0186f0f,c2e17c00,c2e17c00) at +0x2c6
DEVICE_ATTACH(c2e17c00,c2e17c00,c2e16280,0,0) at +0x2e
device_probe_and_attach(c2e17c00) at +0x63
bus_generic_attach(c2e16100,c0494f40,c0186f0f,c2e16100,c2e16100) at
+0x16
DEVICE_ATTACH(c2e16100,c2e16100,c2e16400,0,1) at +0x2e
device_probe_and_attach(c2e16100) at +0x63
bus_generic_attach(c2e16280,c0494f78,c0186f0f,c2e16280,c2e16280) at
+0x16
DEVICE_ATTACH(c2e16280,c2e16280,c1454880,0,1) at +0x2e
device_probe_and_attach(c2e16280) at +0x63
bus_generic_attach(c2e16400,c2e16400,c0494fa4,c012dd6e,c2e16400) at
+0x16
nexus_attach(c2e16400,c0494fc0,c0186f0f,c2e16400,c2e16400) at +0xd
DEVICE_ATTACH(c2e16400,c2e16400,c0386ad0,49c000,1) at +0x2e
device_probe_and_attach(c2e16400) at +0x63
root_bus_configure(c1454880,c035e6ec,0) at +0x16
configure(0,491c00,49c00,0,c012d660) at +0x2a
mi_startup(0,0,0,0,0) at +0x69
begin() at +0x47

That's it... hope I read my writing correctly.... :)
Michael