Problems with Intel SE7500WV2

[Tommy Eriksen]

(Apologies for duplicate messages, if any. Sent this yesterday but it
didn't seem to make it through).

Hi,

I've got an Intel SE7500WV2 in a SR1200 chassis with 2 Xeon 2.4GHz, 2GB
of ECC RAM and 2 Maxtor Maxtor 6E040L0/NAR61590.
The system installs fine, but when booting it afterwards I first get a
couple of error-messages from the disks ("ad4: UDMA ICRC error reading
fsbn 43327 of 0-119 (ad4 bn 43327; cn 42 tn 15 sn 46) retrying" after
which it falls back to PIO-mode), and then, when trying to transfer data
over the network (it has 2 em-cards onboard), I get errors in the
transfers.
I replaced the board with a new one from Intel thinking it was the board
having errors.
I get the errors with both 4.8-RELEASE and 5.1-RELEASE.

I've tried googling a bit but haven't really seen any posts about other
folks having these problems.
I've got an identical machine running - it displays the same ATA-errors
but on that one, I can put the disks back in UDMA133-mode with
atacontrol and then all is well untill next reboot. Not really an
"elegant" solution, but I had to get that one running quickly.

My first thought after installing the machine and seeing the erorrs was
to try to cvsup to a later version, but when trying to fetch cvsup I
get:
# fetch <url>/cvsup-16.1e.tgz && pkg_add cvsup-16.1e.tgz
Receiving cvsup-16.1e.tgz (2148280 bytes): 100%
2148280 bytes transferred in 10.0 seconds (209.47 kBps)
tar: Skipping to next header
tar: Archive contains obsolescent base-64 headers

gzip: stdin: invalid compressed data--format violated
tar: Child returned status 1
tar: Error exit delayed from previous errors
pkg_add: tar extract of /root/cvsup-16.1e.tgz failed!
pkg_add: unable to extract '/root/cvsup-16.1e.tgz'!
-and dmesg logs:
NMI ISA 20, EISA 4
NMI ISA 20, EISA 4
NMI ISA 30, EISA 4

If trying to SCP the package to the machine I get:
# scp cvsup-16.1e.tgz 192.168.24.241:
Password:
cvsup-16.1e.tgz        0% |
|     0       --:-- ETAReceived disconnect from 192.168.24.241: 2:
Corrupted MAC on input.
lost connection
-And once again, dmesg logs:
NMI ISA 20, EISA 4

Verbose dmesg-output follows:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights
reserved.
FreeBSD 4.8-RELEASE #0: Thu Apr  3 10:53:38 GMT 2003
    root at freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC
Calibrating clock(s) ... TSC clock: 2392260160 Hz, i8254 clock: 1193171
Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.29-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 2147418112 (2097088K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009cfff, 638976 bytes (156 pages)
0x00544000 - 0x7ffe7fff, 2141863936 bytes (522916 pages)
avail memory = 2086408192 (2037508K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fdb50
bios32: Entry = 0xfdb64 (c00fdb64)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xdb85
pnpbios: Found PnP BIOS data at 0xc00f2ac0
pnpbios: Entry = f0000:237f  Rev = 1.0
Other BIOS signatures found:
ACPI: 000ff9b0
Preloaded elf kernel "kernel" at 0xc051d000.
Pentium Pro MTRR support enabled
Creating DISK md0
md0: Malloc disk
Math emulator present
pci_open(1):    mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=80] is there (id=254c8086)
Using $PIR table, 19 entries at 0xc00f2f90
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x254c, revid=0x01
        class=06-00-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x8086, dev=0x2541, revid=0x01
        class=ff-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
found-> vendor=0x8086, dev=0x2545, revid=0x01
        class=06-04-00, hdrtype=0x01, mfdev=1
        subordinatebus=4        secondarybus=2
found-> vendor=0x8086, dev=0x2546, revid=0x01
        class=ff-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
found-> vendor=0x8086, dev=0x244e, revid=0x42
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=1        secondarybus=1
found-> vendor=0x8086, dev=0x2480, revid=0x02
        class=06-01-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x8086, dev=0x248b, revid=0x02
        class=01-01-8a, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=0
        map[10]: type 1, range 32, base 00000000, size  3
        map[14]: type 1, range 32, base 00000000, size  2
        map[18]: type 1, range 32, base 00000000, size  3
        map[1c]: type 1, range 32, base 00000000, size  2
        map[20]: type 1, range 32, base 000003a0, size  4
found-> vendor=0x8086, dev=0x2483, revid=0x02
        class=0c-05-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=b, irq=0
        map[20]: type 1, range 32, base 00000580, size  5
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1
pcib1: <PCI to PCI bridge (vendor=8086 device=2545)> at device 3.0 on
pci0
found-> vendor=0x8086, dev=0x1461, revid=0x04
        class=08-00-20, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[10]: type 1, range 32, base feae0000, size 12
found-> vendor=0x8086, dev=0x1460, revid=0x04
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=4        secondarybus=4
found-> vendor=0x8086, dev=0x1461, revid=0x04
        class=08-00-20, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[10]: type 1, range 32, base feaf0000, size 12
found-> vendor=0x8086, dev=0x1460, revid=0x04
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=3        secondarybus=3
pci2: <PCI bus> on pcib1
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on
pci2
pci4: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on
pci2
found-> vendor=0x8086, dev=0x1010, revid=0x01
        class=02-00-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
        intpin=a, irq=10
        map[10]: type 1, range 64, base fe8a0000, size 17
        map[20]: type 1, range 32, base 00002040, size  6
found-> vendor=0x8086, dev=0x1010, revid=0x01
        class=02-00-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
        intpin=b, irq=10
        map[10]: type 1, range 64, base fe8c0000, size 17
        map[20]: type 1, range 32, base 00002000, size  6
pci3: <PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.4.10> port
0x2040-0x207f mem 0xfe8a0000-0xfe8bffff irq 10 at device 7.0 on pci3
bpf: em0 attached
em0:  Speed:N/A  Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.4.10> port
0x2000-0x203f mem 0xfe8c0000-0xfe8dffff irq 10 at device 7.1 on pci3
        using shared irq10.
bpf: em1 attached
em1:  Speed:100 Mbps  Duplex:Full
pci0: <unknown card> (vendor=0x8086, dev=0x2546) at 3.1
pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on
pci0
found-> vendor=0x105a, dev=0x7275, revid=0x01
        class=01-04-85, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=9
        map[10]: type 1, range 32, base 00001400, size  3
        map[14]: type 3, range 32, base 00001408, size  2
        map[18]: type 1, range 32, base 00001410, size  3
        map[1c]: type 3, range 32, base 0000140c, size  2
        map[20]: type 1, range 32, base 00001420, size  4
        map[24]: type 1, range 32, base fe7e0000, size 14
found-> vendor=0x1002, dev=0x4752, revid=0x27
        class=03-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=11
        map[10]: type 1, range 32, base fd000000, size 24
        map[14]: type 1, range 32, base 00001000, size  8
        map[18]: type 1, range 32, base fe7f0000, size 12
pci1: <PCI bus> on pcib4
atapci0: <Promise TX2 ATA133 controller> port
0x1420-0x142f,0x140c-0x140f,0x1410-0x1417,0x1408-0x140b,0x1400-0x1407
mem 0xfe7e0000-0xfe7e3fff irq 9 at device 2.0 on pci1
ata-: ata2 exists, using next available unit number
ata2: iobase=0x1400 altiobase=0x140a bmaddr=0x1420
ata2: mask=03 ostat0=50 ostat2=00
ata2-master: ATAPI 00 00
ata2-slave: ATAPI 00 00
ata2: mask=03 stat0=50 stat1=00
ata2-master: ATA 01 a5
ata2: devices=01
ata2: at 0x1400 on atapci0
ata3: iobase=0x1410 altiobase=0x140e bmaddr=0x1428
ata3: mask=03 ostat0=50 ostat2=00
ata3-master: ATAPI 00 00
ata3-slave: ATAPI 00 00
ata3: mask=03 stat0=50 stat1=00
ata3-master: ATA 01 a5
ata3: devices=01
ata3: at 0x1410 on atapci0
        using shared irq9.
pci1: <ATI Mach64-GR graphics accelerator> (vendor=0x1002, dev=0x4752)
at 12.0 irq 11
isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on
pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH3 ATA100 controller> port
0x3a0-0x3af,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x03a0
ata0: mask=03 ostat0=00 ostat2=00
ata0-master: ATAPI 74 74
ata0-slave: ATAPI 74 74
ata0: mask=03 stat0=74 stat1=74
ata0: devices=00
ata0: at 0x1f0 irq 14 on atapci1
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x03a8
ata1: mask=03 ostat0=50 ostat2=7f
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 7f 7f
ata1: mask=03 stat0=00 stat1=7f
ata1-slave: ATA 7f 7f
ata1: devices=04
ata1: at 0x170 irq 15 on atapci1
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0
ex_isa_identify()
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xd17ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata4 failed to probe at port 0x1f0 irq 14 on isa0
ata5 failed to probe at port 0x170 irq 15 on isa0
adv0 failed to probe on isa0
bt0: Failed Status Reg Test - 80
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - 0
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed 80
aha0: status reg test failed 0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: faith0 attached
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c240, tty 63001a, net 67041a
bpf: sl0 attached
ad4: success setting UDMA6 on Promise chip
Creating DISK ad4
ad6: success setting UDMA6 on Promise chip
Creating DISK ad6
Creating DISK ar0
ar0: 39205MB <ATA RAID1 array> [4998/255/63] status: READY subdisks:
 0 READY ad6: <Maxtor 6E040L0/NAR61590> ATA-7 disk at ata3-master
ad6: 39205MB (80293248 sectors), 79656 C, 16 H, 63 S, 512 B
ad6: 16 secs/int, 1 depth queue, UDMA133
ad6: piomode=4 dmamode=2 udmamode=6 cblid=1
          1 READY ad4: <Maxtor 6E040L0/NAR61590> ATA-7 disk at
ata2-master
ad4: 39205MB (80293248 sectors), 79656 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA133
ad4: piomode=4 dmamode=2 udmamode=6 cblid=1
         ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <SAMSUNG CD-ROM SN-124/QM15> CDROM drive at ata1 as master
acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ar0s1a
ar0s1: type 0xa5, start 63, end = 80292869, size 80292807 : OK
start_init: trying /sbin/init
ad4: UDMA ICRC error reading fsbn 43327 of 0-119 (ad4 bn 43327; cn 42 tn
15 sn 46) retrying
ad4: UDMA ICRC error reading fsbn 43327 of 0-119 (ad4 bn 43327; cn 42 tn
15 sn 46) retrying
ad4: UDMA ICRC error reading fsbn 42967 of 0-103 (ad4 bn 42967; cn 42 tn
10 sn 1) retrying
ad4: UDMA ICRC error reading fsbn 42967 of 0-103 (ad4 bn 42967; cn 42 tn
10 sn 1) retrying
ad4: UDMA ICRC error reading fsbn 42967 of 0-103 (ad4 bn 42967; cn 42 tn
10 sn 1) retrying
ad4: UDMA ICRC error reading fsbn 42967 of 0-103 (ad4 bn 42967; cn 42 tn
10 sn 1)ad4: success setting PIO4 on generic chip
 falling back to PIO mode
ad6: UDMA ICRC error reading fsbn 383 of 0-31 (ad6 bn 383; cn 0 tn 6 sn
5) retrying