dc0 ethernet card

[dave]

Hi,

I'm running FreeBSD 5.0-DP2 with a dc0 (LinkSys LNE100TX v2.0 PNIC II 82c115)
which has clone chip 21143(intel) design.

dmesg output:

Apr 30 06:46:13 insane kernel: dc0: <LC82C115 PNIC II 10/100BaseTX> port 
0xb800-0
xb8ff mem 0xec800000-0xec8000ff irq 6 at device 6.0 on pci1
Apr 30 06:46:13 insane kernel: dc0: Ethernet address: 00:00:00:00:00:00
Apr 30 06:46:13 insane kernel: miibus0: <MII bus> on dc0
Apr 30 06:46:13 insane kernel: dcphy0: <Intel 21143 NWAY media interface> 
on miib
us0
Apr 30 06:46:13 insane kernel: dcphy0:  10baseT, 10baseT-FDX, 100baseTX, 
100baseT
X-FDX, auto

I have a 16 IP # subnet with defaultroute to dsl modem. I've set up many 
many machines
on this subnet. With this card, I can't get it to route outside the local 
network. It will
do DNS to the local DNS server, and can ssh to and from it to local machine.

I then plugged this card into another machine running freebsd, exactly same 
problem.
I can ping local machines, but nothing past the DSL modem. I've set up the 
routing
on this network at least 30 other times for different machines/cards.

I figure it must be a media settings, or something similar but I can't 
solve it.

thanks
dave