my machine freezes if I reset it

Sun Apr 27 14:46:12 PDT 2003

Here´s the "dmesg -a" output:

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Thu Apr  3 10:53:38 GMT 2003
    root at freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P54C (132.96-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x52c  Stepping = 12
  Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory  = 33554432 (32768K bytes)
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 27553792 (26908K bytes)
Preloaded elf kernel "kernel" at 0xc051d000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc051d09c.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 8.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xfe80-0xfe8f at device 8.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <ATI Mach64-GT graphics accelerator> at 19.0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: cannot reserve I/O port range
ed1: <PnP ISA Ethernet Adapter> at port 0x280-0x29f irq 5 on isa0
ed1: address 00:80:ad:70:96:cc, type NE2000 (16 bit)
ata1-slave: ATAPI identify retries exceeded
ad0: 1628MB <IBM-DJAA-31700> [3308/16/63] at ata0-master WDMA2
acd0: CDROM <FX600T> at ata1-master PIO3
Mounting root from ufs:/dev/ad0s1a
swapon: adding /dev/ad0s1b as swap device
Automatic boot in progress...
/dev/ad0s1a:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a:
clean, 46920 free
(656 frags, 5783 blocks, 1.0% fragmentation)
/dev/ad0s1f:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1f:
clean, 128997 free
(21 frags, 16122 blocks, 0.0% fragmentation)
/dev/ad0s1g:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1g:
clean, 371542 free
(19734 frags, 43976 blocks, 4.2% fragmentation)
/dev/ad0s1e:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1e:
clean, 128811 free
(75 frags, 16092 blocks, 0.1% fragmentation)
Doing initial network setup:
 hostname
.
ed1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 192.168.0.101 netmask 0xffffff00 broadcast 192.168.0.255
        inet6 fe80::280:adff:fe70:96cc%ed1 prefixlen 64 tentative scopeid
0x1
        ether 00:80:ad:70:96:cc
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
        inet 127.0.0.1 netmask 0xff000000
add net default: gateway 192.168.0.100
Additional routing options:
 TCP keepalive=YES
.
Routing daemons:
.
Additional daemons:
 syslogd
.
Doing additional network setup:
.
Starting final network daemons:
.
ELF ldconfig path: /usr/lib /usr/lib/compat /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Starting standard daemons:
 cron
 sshd
 sendmail
 sendmail-clientmqueue
.
Initial rc.i386 initialization:
.
Configuring syscons:
 blanktime
.
Additional ABI support:
.
Local package initialization:
 apache2
.
Additional TCP options:
.

----- Original Message -----
From: "Sean J. Countryman" <sean at rackoperations.com>
To: "Alfonso Romero" <ibac at prodigy.net.mx>; "freebsd-questions"
<freebsd-questions at freebsd.org>
Sent: Sunday, April 27, 2003 4:20 PM
Subject: RE: my machine freezes if I reset it

> what does dmesg say?
>
> -----Original Message-----
> From: owner-freebsd-questions at freebsd.org
> [mailto:owner-freebsd-questions at freebsd.org]On Behalf Of Alfonso Romero
> Sent: Sunday, April 27, 2003 2:58 PM
> To: freebsd-questions
> Subject: my machine freezes if I reset it
>
>
> When I use the "shutdown -r now" command, my freebsd 4.8 machine starts
the
> rebooting process, but freezes when detecting the "pci0" device: an ATI
Mach
> 64 Accelerator card. If I shutdown the machine and then turn off the
power,
> when I turn it on again there isn´t any problem: FreeBSD goes through the
> boot process without any trouble. What could be causing this?
>
>
>
> Thanks in advance,
>
> Alfonso Romero
>
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
"freebsd-questions-unsubscribe at freebsd.org"
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
"freebsd-questions-unsubscribe at freebsd.org"
>

_______________________________________________
freebsd-doc at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-doc
To unsubscribe, send any mail to "freebsd-doc-unsubscribe at freebsd.org"