problem with isa pccard (pcmcia) card drive and "compactflash adapter"

Mon Apr 21 04:29:42 PDT 2003

On Mon, 21 Apr 2003 12:25:35 +0200
Thomas Spreng <spreng at socket.ch> wrote:

> Hi,
> On Mon, Apr 21, 2003 at 09:47:48AM +0200, Julian Picht wrote:
> > Hi list,
> > 
> > I have a PCD-220 from Conard Electrinics. When I insert a card I get the message "pccard: card inserted, slot 0". This seems ok to me. The card is a "CompactFLASH Adapter" which works under windoze without a problem.
> > Now I want to mount the cf card but what is the device name?
> > 
> > I'm using FreeBSD 4.8.
> 
> 'dmesg' should show your new device.
nope. just the message 'pccard: card inserted, slot 0'

% whoami
root
% dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #1: Fri Apr 11 16:01:26 CEST 2003
    root at compjuta.HANNOVER:/usr/obj/usr/src/sys/FIRSTKERNEL
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Duron(tm) Processor  (807.96-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x631  Stepping = 1
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
  AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory  = 469696512 (458688K bytes)
config> en ed0
config> po ed0 0x280
config> ir ed0 10
config> iom ed0 0xd8000
config> f ed0 0
config> q
avail memory = 449957888 (439412K bytes)
Preloaded elf kernel "kernel" at 0xc06b4000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc06b409c.
Preloaded elf module "linux.ko" at 0xc06b40ec.
Preloaded elf module "snd_solo.ko" at 0xc06b418c.
Preloaded elf module "snd_pcm.ko" at 0xc06b422c.
Preloaded elf module "agp.ko" at 0xc06b42cc.
Preloaded elf module "nvidia.ko" at 0xc06b4368.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00f7d90
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <AMD-751 host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <AMD 751 host to AGP bridge> mem 0xeddfd000-0xeddfdfff,0xe8000000-0xebffffff at device 0.0 on pci0
pcib1: <AMD-751 PCI-PCI (1x/2x AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce2 MX/MX 400> mem 0xd8000000-0xdfffffff,0xee000000-0xeeffffff irq 11 at device 5.0 on pci1
isab0: <PCI to ISA bridge (vendor=1022 device=7408)> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 756 ATA66 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
chip0: <PCI to Other bridge (vendor=1022 device=740b)> at device 7.3 on pci0
ohci0: <AMD-756 USB Controller> mem 0xefffb000-0xefffbfff irq 5 at device 7.4 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AMD-756 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xd400-0xd41f irq 9 at device 8.0 on pci0
ed0: address 52:54:05:f5:81:41, type NE2000 (16 bit) 
pcm0: <ESS Solo-1 (unknown vendor)> port 0xd600-0xd603,0xd800-0xd803,0xda00-0xda0f,0xdc00-0xdc0f,0xde00-0xde3f irq 11 at device 9.0 on pci0
bktr0: <BrookTree 878> mem 0xeddfe000-0xeddfefff irq 10 at device 10.0 on pci0
iicbb0: <I2C bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicbus1: <Philips I2C bus> on iicbb0 master-only
smbus0: <System Management Bus> on bti2c0
bktr0: Hauppauge Model 61324 B408
bktr0: Detected a MSP3410D-B4 at 0x80
bktr0: Hauppauge WinCast/TV, Philips PAL I tuner, msp3400c stereo, remote control.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 10.1 irq 10
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pcic2: <Cirrus logic 6722> at port 0x3e0-0x3ef on isa0
pcic2: Polling mode
pccard0: <PC Card 16-bit bus (classic)> on pcic2
pccard1: <PC Card 16-bit bus (classic)> on pcic2
ad0: 19536MB <ST320423A> [39693/16/63] at ata0-master UDMA66
ad1: 9671MB <IBM-DTTA-351010> [19650/16/63] at ata0-slave UDMA33
acd0: CD-RW <AOPEN CD-RW CRW2440> at ata1-master WDMA2
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 0
ad1s2: raw partition size != slice size
ad1s2: start 63, end 530144, size 530082
ad1s2c: start 63, end 12370049, size 12369987
ad1s2: truncating raw partition
ad1s2: rejecting partition in BSD label: it isn't entirely within the slice
ad1s2: start 63, end 530144, size 530082
ad1s2a: start 409663, end 12370049, size 11960387
pccard: card deactivated, slot 0
pccard: card removed, slot 0
pccard: card inserted, slot 0

anything I need in my kernel that I may forgot?

MfG Julian Picht