XFree86-4.x vs Silicon Motion SMI LynxE SM811
Stacey Roberts
stacey at vickiandstacey.com
Mon Apr 14 06:32:22 PDT 2003
Hello,
I've just installed and upgraded to FreeBSD 4.8 Stable on an HP OmniBook XE2 laptop. However I cannot get X configured on this thing despite trying all methods in the handbook (http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x-config.html), and from /stand/sysinstall.
Here is specs of the machine:
HP OmniBook XE2
Pentium 2 366MHz, 128 MB Ram, 6.4 GB HDD
Graphics: 13.3 inch XGA Active-matrix (TFT) display (1024x768x64K colors)
SMI Lynx SM811 Graphics controller, 2MB 135MHz SGRAM
Zoomed Video support / Dual Monitor support
If there is any further info I can provide, please let me know. There isn't any Gnome or KDE installed as yet, but all of XFree86 files and dependancies were installed and portupgraded successfully only today.
Thanks for the time, sorry about the double post.
Regards,
Stacey
Here is what get put to /var/log when attempting to run "XFree86 -xf86config XF86Config.new:
$ cat XFree86.0.log
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: FreeBSD 4.8 i386 [ELF]
Build Date: 14 April 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Apr 14 08:18:21 2003
(++) Using config file: "XF86Config.new"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7192 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 126f,0810 card 126f,0810 rev a6 class 03,00,00 hdr 00
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:0a:0: chip 104c,ac1c card 0000,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 00:0a:1: chip 104c,ac1c card 0000,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 00:0e:0: chip 125d,1978 card 103c,0009 rev 10 class 04,01,00 hdr 80
(II) PCI: 00:0e:1: chip 125d,1978 card 103c,0009 rev 10 class 07,80,00 hdr 80
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Silicon Motion, Inc. SM810 LynxE rev 166, Mem @ 0xfd000000/24
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[1] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]E
[2] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]E
[3] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]E
[4] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E
(II) PCI I/O resource overlap reduced 0x0000fcc0 from 0x0000fcff to 0x0000fcdf
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[1] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]E
[2] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]E
[3] -1 0 0x0000fcc0 - 0x0000fcdf (0x20) IX[B]E
[4] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[8] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]E
[9] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]E
[10] -1 0 0x0000fcc0 - 0x0000fcdf (0x20) IX[B]E
[11] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "siliconmotion"
(II) Loading /usr/X11R6/lib/modules/drivers/siliconmotion_drv.o
(II) Module siliconmotion: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.3.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) Silicon Motion: driver (version 1.3.1) for Silicon Motion Lynx chipsets:
Lynx, LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM
(II) Primary Device is: PCI 00:02:0
(--) Chipset LynxE found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[8] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]E
[9] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]E
[10] -1 0 0x0000fcc0 - 0x0000fcdf (0x20) IX[B]E
[11] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[6] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[7] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[8] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]E
[12] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]E
[13] -1 0 0x0000fcc0 - 0x0000fcdf (0x20) IX[B]E
[14] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E
[15] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[16] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(==) Silicon Motion(0): Depth 8, (==) framebuffer bpp 8
(==) Silicon Motion(0): Default visual is PseudoColor
(==) Silicon Motion(0): Using Hardware Cursor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(==) Silicon Motion(0): Write-combining range (0xa0000,0x20000) was already clear
(==) Silicon Motion(0): Write-combining range (0xc0000,0x40000) was already clear
(II) Silicon Motion(0): Primary V_BIOS segment is: 0xc000
(==) Silicon Motion(0): Write-combining range (0x0,0x1000) was already clear
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Silicon Motion(0): VESA BIOS detected
(II) Silicon Motion(0): VESA VBE Version 0.0
(II) Silicon Motion(0): VESA VBE Total Mem: 2048 kB
(II) Silicon Motion(0): VESA VBE OEM: S?
(--) Silicon Motion(0): Chipset: "LynxE"
(==) Silicon Motion(0): Write-combining range (0xfd400000,0x10000) was already clear
(II) Silicon Motion(0): Cursor Offset: FFFFFC00 Reserved: FFFFF800
(II) Silicon Motion(0): TFT Panel Size = 1024x768
(II) Silicon Motion(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) Silicon Motion(0): Write-combining range (0xa0000,0x10000) was already clear
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) Silicon Motion(0): I2C bus "I2C bus" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(==) Silicon Motion(0): Write-combining range (0x0,0x1000) was already clear
(==) Silicon Motion(0): Using gamma correction (1.0, 1.0, 1.0)
(--) Silicon Motion(0): videoram: 2048kB
(--) Silicon Motion(0): Detected current MCLK value of 54.409 MHz
(WW) Silicon Motion(0): Monitor0: Using default hsync range of 28.00-33.00kHz
(WW) Silicon Motion(0): Monitor0: using default vrefresh range of 43.00-72.00Hz
(II) Silicon Motion(0): Clock range: 20.00 to 135.00 MHz
(II) Silicon Motion(0): Mode: 640x350 8-bpp, 85.079948Hz
(II) Silicon Motion(0): Not using default mode "640x350" (hsync out of range)
(II) Silicon Motion(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 640x400 8-bpp, 85.079948Hz
(II) Silicon Motion(0): Not using default mode "640x400" (hsync out of range)
(II) Silicon Motion(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 720x400 8-bpp, 85.038902Hz
(II) Silicon Motion(0): Not using default mode "720x400" (hsync out of range)
(II) Silicon Motion(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 640x480 8-bpp, 60.000000Hz
(II) Silicon Motion(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 640x480 8-bpp, 72.808800Hz
(II) Silicon Motion(0): Not using default mode "640x480" (hsync out of range)
(II) Silicon Motion(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 640x480 8-bpp, 75.000000Hz
(II) Silicon Motion(0): Not using default mode "640x480" (hsync out of range)
(II) Silicon Motion(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 640x480 8-bpp, 85.008308Hz
(II) Silicon Motion(0): Not using default mode "640x480" (hsync out of range)
(II) Silicon Motion(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 800x600 8-bpp, 56.250000Hz
(II) Silicon Motion(0): Not using default mode "800x600" (hsync out of range)
(II) Silicon Motion(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 800x600 8-bpp, 60.316540Hz
(II) Silicon Motion(0): Not using default mode "800x600" (hsync out of range)
(II) Silicon Motion(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 800x600 8-bpp, 72.187569Hz
(II) Silicon Motion(0): Not using default mode "800x600" (hsync out of range)
(II) Silicon Motion(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 800x600 8-bpp, 75.000000Hz
(II) Silicon Motion(0): Not using default mode "800x600" (hsync out of range)
(II) Silicon Motion(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 800x600 8-bpp, 85.136887Hz
(II) Silicon Motion(0): Not using default mode "800x600" (hsync out of range)
(II) Silicon Motion(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1024x768 8-bpp, 60.003841Hz
(II) Silicon Motion(0): Not using default mode "1024x768" (hsync out of range)
(II) Silicon Motion(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1024x768 8-bpp, 70.069359Hz
(II) Silicon Motion(0): Not using default mode "1024x768" (hsync out of range)
(II) Silicon Motion(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1024x768 8-bpp, 75.076218Hz
(II) Silicon Motion(0): Not using default mode "1024x768" (hsync out of range)
(II) Silicon Motion(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1024x768 8-bpp, 84.996689Hz
(II) Silicon Motion(0): Not using default mode "1024x768" (hsync out of range)
(II) Silicon Motion(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1152x864 8-bpp, 75.000000Hz
(II) Silicon Motion(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) Silicon Motion(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1280x960 8-bpp, 60.000000Hz
(II) Silicon Motion(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) Silicon Motion(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1280x1024 8-bpp, 60.019741Hz
(II) Silicon Motion(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) Silicon Motion(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1280x1024 8-bpp, 75.024673Hz
(II) Silicon Motion(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) Silicon Motion(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1792x1344" (insufficient memory
for mode)
(II) Silicon Motion(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1792x1344" (insufficient memory
for mode)
(II) Silicon Motion(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1856x1392" (insufficient memory
for mode)
(II) Silicon Motion(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1856x1392" (insufficient memory
for mode)
(II) Silicon Motion(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1920x1440" (insufficient memory
for mode)
(II) Silicon Motion(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1920x1440" (insufficient memory
for mode)
(II) Silicon Motion(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 832x624 8-bpp, 74.551270Hz
(II) Silicon Motion(0): Not using default mode "832x624" (hsync out of range)
(II) Silicon Motion(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1152x768 8-bpp, 54.781902Hz
(II) Silicon Motion(0): Not using default mode "1152x768" (exceeds panel dimensions)
(II) Silicon Motion(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1400x1050 8-bpp, 59.975616Hz
(II) Silicon Motion(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) Silicon Motion(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1600x1024 8-bpp, 59.998093Hz
(II) Silicon Motion(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) Silicon Motion(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1920x1440" (insufficient memory
for mode)
(II) Silicon Motion(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "2048x1536" (insufficient memory
for mode)
(II) Silicon Motion(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "2048x1536" (insufficient memory
for mode)
(II) Silicon Motion(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "2048x1536" (insufficient memory
for mode)
(II) Silicon Motion(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 640x480 8-bpp, 60.000000Hz
(--) Silicon Motion(0): Virtual size is 640x480 (pitch 640)
(**) Silicon Motion(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) Silicon Motion(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(==) Silicon Motion(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]
[1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[7] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[8] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[9] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]E
[13] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]E
[14] -1 0 0x0000fcc0 - 0x0000fcdf (0x20) IX[B]E
[15] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E
[16] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[17] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(==) Silicon Motion(0): Write-combining range (0xfd400000,0x10000) was already clear
(==) Silicon Motion(0): Write-combining range (0xfd000000,0x200000)
(II) Silicon Motion(0): Cursor Offset: 001FFC00 Reserved: 001FF800
(II) Silicon Motion(0): TFT Panel Size = 1024x768
(II) Silicon Motion(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) Silicon Motion(0): Write-combining range (0xa0000,0x10000) was already clear
(==) Silicon Motion(0): Write-combining range (0xa0000,0x20000) was already clear
(II) Silicon Motion(0): Primary V_BIOS segment is: 0xc000
(==) Silicon Motion(0): Write-combining range (0x0,0x1000) was already clear
(II) Silicon Motion(0): Current mode 0x03.
(II) Silicon Motion(0): Setting mode 0x50
(II) Silicon Motion(0): FrameBuffer Box: 0,0 - 640,3273
(II) Silicon Motion(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
32 8x8 color pattern slots
(II) Silicon Motion(0): I2C device "I2C bus:SAA 7111A" registered at address 0x48.
(II) Silicon Motion(0): I2C device "I2C bus:SAA 7111A" removed.
*** If unresolved symbols were reported above, they might not
*** be the reason for the server aborting.
Fatal server error:
Caught signal 11. Server aborting
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86 at xfree86.org.
(II) Silicon Motion(0): Setting mode 0x03
$
--
Stacey Roberts
B. Sc (HONS) Computer Science
Web: www.vickiandstacey.com
More information about the freebsd-questions
mailing list