Gigabit ethernet SMC Tigercard 1000

[W. J. Williams]

ok, that was dumb, the inphy0 doesnt relate to the gig-e card...do I need
to activate something in the kernel to support?

> Does anyone know how to configure this.
> 
> I have installed the card and connected to my switch.  have noticed I
> now
> have interfaces
> 
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> 
> inphy1: <i82555 10/100 media interface> on miibus1
> inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> 
> not sure why listed twice...or if this even relates to the card seeing
> how
> it doesnt say 1000base-SX
> 
> here is what the entire interface section looks like (from DMESG):
> fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x5400-0x543f mem
> 0xfb000000-0xfb0fffff,0xfb201000-0xfb201fff irq 10 at device 3.0 on pci0
> fxp0: Ethernet address 00:d0:b7:b7:66:eb
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x5440-0x547f mem
> 0xfb100000-0xfb1fffff,0xfb202000-0xfb202fff irq 5 at device 6.0 on pci0
> fxp1: Ethernet address 00:02:b3:10:e4:13
> inphy1: <i82555 10/100 media interface> on miibus1
> inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> 
> 
> Here is the output of ifconfig:
> 
> fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>         inet 192.168.0.2 netmask 0xfffff800 broadcast 192.168.7.255
>         inet6 fe80::2d0:b7ff:feb7:66eb%fxp0 prefixlen 64 scopeid 0x1
>         ether 00:d0:b7:b7:66:eb
>         media: Ethernet autoselect (100baseTX <full-duplex>)
>         status: active
> fxp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>         inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
>         inet6 fe80::202:b3ff:fe10:e413%fxp1 prefixlen 64 scopeid 0x2
>         ether 00:02:b3:10:e4:13
>         media: Ethernet autoselect (100baseTX <full-duplex>)
>         status: active
> ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
> sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
> faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>         inet6 ::1 prefixlen 128
>         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
>         inet 127.0.0.1 netmask 0xff000000
> 
> I am running two 100baseT nics on this box...
> 
> appreciate any help.
> 
> Will
> 
> 
> 
> 
> =====
> Will Williams
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
"freebsd-questions-unsubscribe at freebsd.org"


=====
Will Williams