python26 (python26-2.6.2_3) build ERROR in FreeBSD ports tree

[David Southwell]

> > > Der Sir,
> > >
> > >       When I build python26 from FreeBSD ports, it shown me the
> > > following ERROR messages:
> > >
> > > ====================================================================
> > > <-root->make depend all
> > > ===>  Vulnerability check disabled, database not found
> > > ===>  Found saved configuration for python26-2.6.2_3
> > > ===>  Extracting for python26-2.6.2_3
> > > => MD5 Checksum OK for python/Python-2.6.2.tgz.
> > > => SHA256 Checksum OK for python/Python-2.6.2.tgz.
> > > ===>  Patching for python26-2.6.2_3
> > > /bin/cp -r /usr/ports/lang/python26/work/Python-2.6.2/Lib/plat-freebsd8
> > >  /usr/ports/lang/python26/work/Python-2.6.2/Lib/plat-freebsd9
> > > /bin/mkdir -p /usr/ports/lang/python26/work/Python-2.6.2/portbld.static
> > > /usr/ports/lang/python26/work/Python-2.6.2/portbld.shared/Modules
> > > /bin/ln /usr/ports/lang/python26/work/Python-2.6.2/Lib/smtpd.py
> > > /usr/ports/lang/python26/work/Python-2.6.2/Tools/scripts/
> > > /usr/bin/sed -e '1s,^.*$,#!/usr/local/bin/python2.6,'
> > > /usr/ports/lang/python26/work/Python-2.6.2/Tools/scripts/2to3  >
> > > /usr/ports/lang/python26/work/`echo 2to3 | /usr/bin/sed -E -e
> > > 's,smtpd,smtpd2.6,'  -e 's,2to3,2to3-2.6,'  -e
> > > 's,(idle|pydoc|python-shared|python),\12.6,'`
> > > /usr/bin/sed -e '1s,^.*$,#!/usr/local/bin/python2.6,'
> > > /usr/ports/lang/python26/work/Python-2.6.2/Tools/scripts/idle  >
> > > /usr/ports/lang/python26/work/`echo idle | /usr/bin/sed -E -e
> > > 's,smtpd,smtpd2.6,'  -e 's,2to3,2to3-2.6,'  -e
> > > 's,(idle|pydoc|python-shared|python),\12.6,'`
> > > /usr/bin/sed -e '1s,^.*$,#!/usr/local/bin/python2.6,'
> > > /usr/ports/lang/python26/work/Python-2.6.2/Tools/scripts/pydoc  >
> > > /usr/ports/lang/python26/work/`echo pydoc | /usr/bin/sed -E -e
> > > 's,smtpd,smtpd2.6,'  -e 's,2to3,2to3-2.6,'  -e
> > > 's,(idle|pydoc|python-shared|python),\12.6,'`
> > > /usr/bin/sed -e '1s,^.*$,#!/usr/local/bin/python2.6,'
> > > /usr/ports/lang/python26/work/Python-2.6.2/Tools/scripts/smtpd.py  >
> > > /usr/ports/lang/python26/work/`echo smtpd.py | /usr/bin/sed -E -e
> > > 's,smtpd,smtpd2.6,'  -e 's,2to3,2to3-2.6,'  -e
> > > 's,(idle|pydoc|python-shared|python),\12.6,'`
> > > /usr/bin/sed -i.bak -e
> > > 's,/usr/doc/python-docs-,/usr/local/share/doc/python,g'
> > > /usr/ports/lang/python26/work/Python-2.6.2/Lib/pydoc.py
> > > /usr/bin/sed -i.bak -e  's|^\( *prefixes = .*\)\]$|\1,
> > > "/usr/local"]|g'
> > > /usr/ports/lang/python26/work/Python-2.6.2/Lib/site.py
> > > /usr/bin/sed -i.bak -e  's|^    \(..ASDLGEN.*\)$|       true|g'
> > > /usr/ports/lang/python26/work/Python-2.6.2/Makefile.pre.in
> > > /usr/bin/sed -i.bak -e  's|*\(..INSTALL_SCRIPT.*\)python-config$|#port
> > > \1|'  /usr/ports/lang/python26/work/Python-2.6.2/Makefile.pre.in
> > > /usr/bin/sed -e 's|^#!.*|#!/usr/local/bin/python2.6|'
> > > /usr/ports/lang/python26/work/Python-2.6.2/Misc/python-config.in >
> > > /usr/ports/lang/python26/work/python2.6-config
> > > /usr/bin/sed -e 's|^#!.*|#!/usr/local/bin/python-shared2.6|'
> > > /usr/ports/lang/python26/work/Python-2.6.2/Misc/python-config.in >
> > > /usr/ports/lang/python26/work/python-shared2.6-config
> > > ===>  Applying extra patch
> > >  /usr/ports/lang/python26/files/extra-patch-setup.py ===>  Applying
> > > extra patch
> > > /usr/ports/lang/python26/files/extra-patch-configure-pth
> > > ===>  Applying FreeBSD patches for python26-2.6.2_3
> > > 1 out of 11 hunks failed--saving rejects to setup.py.rej
> > > => Patch patch-setup.py failed to apply cleanly.
> > > => Patch(es) patch-Lib_test_test_threading.py
> > > patch-Modules-_ctypes-libffi-configure patch-Python2.6-Lib_local.py
> > > patch-Python_thread__pthread.h applied cleanly.
> > > *** Error code 1
> > >
> > > Stop in /usr/ports/lang/python26.
> > > *** Error code 1
> > >
> > > Stop in /usr/ports/lang/python26.
> > >
> > >
> > > Best Regards!
> >
> > This is the same error I have been getting and reporting here for almost
> > a week. I have just submitted a PR but do not yet have a number. I will
> > post it here as soon as I receive the PR acknowledgement.
> >
> > David
> 
> PR link:
> http://www.freebsd.org/cgi/query-pr.cgi?pr=138835
> 
> _______________________________________________
Due to the premature closure of the original PR I have had to resubmit the 
info. Here is the new open PR
Link:
http://www.freebsd.org/cgi/query-pr.cgi?pr=138837
>