From edwin at FreeBSD.org Sat Aug 2 16:40:16 2008 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Sat Aug 2 16:40:29 2008 Subject: ports/126197: update devel/py-ice to 3.3.0 Message-ID: <200808021640.m72GeF5x086003@freefall.freebsd.org> Synopsis: update devel/py-ice to 3.3.0 Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-python Responsible-Changed-By: edwin Responsible-Changed-When: Sat Aug 2 16:40:15 UTC 2008 Responsible-Changed-Why: freebsd-python@ wants this port PRs (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=126197 From edwin at FreeBSD.org Sat Aug 2 16:40:20 2008 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Sat Aug 2 16:40:39 2008 Subject: ports/126197: update devel/py-ice to 3.3.0 Message-ID: <200808021640.m72GeJAF086077@freefall.freebsd.org> Synopsis: update devel/py-ice to 3.3.0 State-Changed-From-To: open->feedback State-Changed-By: edwin State-Changed-When: Sat Aug 2 16:40:19 UTC 2008 State-Changed-Why: Awaiting maintainers feedback (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=126197 From edwin at FreeBSD.org Sat Aug 2 16:50:04 2008 From: edwin at FreeBSD.org (Edwin Groothuis) Date: Sat Aug 2 16:50:10 2008 Subject: ports/126197: update devel/py-ice to 3.3.0 Message-ID: <200808021650.m72Go4gj086655@freefall.freebsd.org> The following reply was made to PR ports/126197; it has been noted by GNATS. From: Edwin Groothuis To: dirk.ye@gmail.com Cc: bug-followup@FreeBSD.org Subject: Re: ports/126197: update devel/py-ice to 3.3.0 Date: Sat, 2 Aug 2008 16:40:17 UT Maintainer of devel/py-ice, Please note that PR ports/126197 has just been submitted. If it contains a patch for an upgrade, an enhancement or a bug fix you agree on, reply to this email stating that you approve the patch and a committer will take care of it. The full text of the PR can be found at: http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/126197 -- Edwin Groothuis via the GNATS Auto Assign Tool edwin@FreeBSD.org From dirk.ye at gmail.com Sat Aug 2 17:10:04 2008 From: dirk.ye at gmail.com (DIrk) Date: Sat Aug 2 17:10:10 2008 Subject: ports/126197: update devel/py-ice to 3.3.0 Message-ID: <200808021710.m72HA4Dk087533@freefall.freebsd.org> The following reply was made to PR ports/126197; it has been noted by GNATS. From: DIrk To: bug-followup@freebsd.org Cc: Subject: Re: ports/126197: update devel/py-ice to 3.3.0 Date: Sun, 3 Aug 2008 00:49:43 +0800 On Sun, Aug 3, 2008 at 7:40 AM, Edwin Groothuis wrote: > Maintainer of devel/py-ice, > > Please note that PR ports/126197 has just been submitted. > > If it contains a patch for an upgrade, an enhancement or a bug fix > you agree on, reply to this email stating that you approve the patch > and a committer will take care of it. > > The full text of the PR can be found at: > http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/126197 > > -- > Edwin Groothuis via the GNATS Auto Assign Tool > edwin@FreeBSD.org > From linimon at FreeBSD.org Sun Aug 3 02:01:28 2008 From: linimon at FreeBSD.org (linimon@FreeBSD.org) Date: Sun Aug 3 02:01:33 2008 Subject: ports/126197: update devel/py-ice to 3.3.0 Message-ID: <200808030201.m7321RPG035241@freefall.freebsd.org> Synopsis: update devel/py-ice to 3.3.0 State-Changed-From-To: feedback->open State-Changed-By: linimon State-Changed-When: Sun Aug 3 02:00:30 UTC 2008 State-Changed-Why: Submitter is maintainer using another address. Class-Changed-From-To: change-request->maintainer-update Class-Changed-By: linimon Class-Changed-When: Sun Aug 3 02:00:30 UTC 2008 Class-Changed-Why: http://www.freebsd.org/cgi/query-pr.cgi?pr=126197 From bugmaster at FreeBSD.org Mon Aug 4 11:07:01 2008 From: bugmaster at FreeBSD.org (FreeBSD bugmaster) Date: Mon Aug 4 11:08:36 2008 Subject: Current problem reports assigned to freebsd-python@FreeBSD.org Message-ID: <200808041107.m74B70rs082170@freefall.freebsd.org> Current FreeBSD problem reports Critical problems Serious problems S Tracker Resp. Description -------------------------------------------------------------------------------- a ports/108576 python databases/postgresql-plpython make fails on 6.2 / amd6 o ports/116132 python lang/Python25 - Python 2.4 -> 2.5 upgrade leaves meta- 2 problems total. Non-critical problems S Tracker Resp. Description -------------------------------------------------------------------------------- o ports/109550 python lang/python25 does not install /usr/local/bin/python o ports/110728 python mail/py-spambayes should load config file from a stand o ports/115940 python Missed one file in lang/python25 if NO_NIS defined o ports/118301 python devel/py-setuptools easy-install.pth contents lost on o ports/119440 python lang/python25: NO_NIS=true in /etc/make.conf breaks pk o ports/122616 python databases/py-pyPgSQL - apply bytea escape bug patch in o ports/123154 python New port: devel/py-yapps2 (an easy-to-use parser gener f ports/123675 python New port: deskutils/py-labyrinth Mind mapping tool for f ports/123797 python Update port: devel/py-tables to 2.0.3 o ports/124729 python lang/python25 - Python 2.5 fails in building a package o ports/125459 python Add regression-test target for lang/python25 f ports/125730 python [PATCH] math/py-numpy: update to 1.1.0 o ports/126197 python update devel/py-ice to 3.3.0 13 problems total. From bugmaster at FreeBSD.org Mon Aug 4 11:08:18 2008 From: bugmaster at FreeBSD.org (FreeBSD bugmaster) Date: Mon Aug 4 11:09:47 2008 Subject: Current problem reports assigned to python@FreeBSD.org Message-ID: <200808041108.m74B8IMG083560@freefall.freebsd.org> Current FreeBSD problem reports Critical problems Serious problems S Tracker Resp. Description -------------------------------------------------------------------------------- o ports/126073 python Installing lang/python25 from the meta port changes th 1 problem total. Non-critical problems From linimon at FreeBSD.org Mon Aug 4 19:43:59 2008 From: linimon at FreeBSD.org (linimon@FreeBSD.org) Date: Mon Aug 4 19:44:11 2008 Subject: ports/126073: Installing lang/python25 from the meta port changes the default configuration Message-ID: <200808041943.m74JhxLf034644@freefall.freebsd.org> Synopsis: Installing lang/python25 from the meta port changes the default configuration Responsible-Changed-From-To: python->freebsd-python Responsible-Changed-By: linimon Responsible-Changed-When: Mon Aug 4 19:43:45 UTC 2008 Responsible-Changed-Why: Canonicalize assignment. http://www.freebsd.org/cgi/query-pr.cgi?pr=126073 From linimon at FreeBSD.org Mon Aug 4 19:43:59 2008 From: linimon at FreeBSD.org (linimon@FreeBSD.org) Date: Mon Aug 4 19:44:11 2008 Subject: ports/126073: Installing lang/python25 from the meta port changes the default configuration Message-ID: <200808041943.m74JhxLf034644@freefall.freebsd.org> Synopsis: Installing lang/python25 from the meta port changes the default configuration Responsible-Changed-From-To: python->freebsd-python Responsible-Changed-By: linimon Responsible-Changed-When: Mon Aug 4 19:43:45 UTC 2008 Responsible-Changed-Why: Canonicalize assignment. http://www.freebsd.org/cgi/query-pr.cgi?pr=126073 From brooks at FreeBSD.org Tue Aug 5 19:26:36 2008 From: brooks at FreeBSD.org (Brooks Davis) Date: Tue Aug 5 19:26:43 2008 Subject: request: add --always-unzip to PYEASYINSTALL_INSTALLARGS Message-ID: <20080805192714.GB63260@lor.one-eyed-alien.net> I'd like to request that --always-unzip (-Z) be added to the default PYEASYINSTALL_INSTALLARGS. The reason for this request is that compressed eggs cause all sorts of problems for unattended operation or operation via sudo. For example, trac uses textproc/py-genshi which is installed compressed. Unfortunately, that means you have to create a PYTHON_EGG_CACHE directory with appropriate permissions and put it in the Apache environment if you want it to work. If you further run trac-admin as www via sudo, you end up needing to mangle the environment there as well. I recognize that this change would be a major undertaking since it would break the plist of any port that currently installed a compressed egg, but I think it would greatly improve the usability of modules installed from ports and thus should be given serious consideration. Thanks, Brooks -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 187 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-python/attachments/20080805/3d2d9ec4/attachment.pgp From edwin at FreeBSD.org Tue Aug 5 21:40:13 2008 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Tue Aug 5 21:40:21 2008 Subject: ports/126286: [Maintainer-update] accessibility/py-papi: update to 0.0.6 Message-ID: <200808052140.m75LeDxd010630@freefall.freebsd.org> Synopsis: [Maintainer-update] accessibility/py-papi: update to 0.0.6 Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-python Responsible-Changed-By: edwin Responsible-Changed-When: Tue Aug 5 21:40:12 UTC 2008 Responsible-Changed-Why: freebsd-python@ wants this port PRs (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=126286 From miwi at FreeBSD.org Tue Aug 5 21:59:45 2008 From: miwi at FreeBSD.org (miwi@FreeBSD.org) Date: Tue Aug 5 22:00:05 2008 Subject: ports/126286: [Maintainer-update] accessibility/py-papi: update to 0.0.6 Message-ID: <200808052159.m75LxiWL011356@freefall.freebsd.org> Synopsis: [Maintainer-update] accessibility/py-papi: update to 0.0.6 Responsible-Changed-From-To: freebsd-python->miwi Responsible-Changed-By: miwi Responsible-Changed-When: Tue Aug 5 21:59:44 UTC 2008 Responsible-Changed-Why: I'll take it. http://www.freebsd.org/cgi/query-pr.cgi?pr=126286 From miwi at FreeBSD.org Sun Aug 10 18:26:29 2008 From: miwi at FreeBSD.org (miwi@FreeBSD.org) Date: Sun Aug 10 18:27:05 2008 Subject: ports/126197: update devel/py-ice to 3.3.0 Message-ID: <200808101826.m7AIQTMr023232@freefall.freebsd.org> Synopsis: update devel/py-ice to 3.3.0 Responsible-Changed-From-To: freebsd-python->miwi Responsible-Changed-By: miwi Responsible-Changed-When: Sun Aug 10 18:26:29 UTC 2008 Responsible-Changed-Why: I'll take it. http://www.freebsd.org/cgi/query-pr.cgi?pr=126197 From bugmaster at FreeBSD.org Mon Aug 11 11:07:03 2008 From: bugmaster at FreeBSD.org (FreeBSD bugmaster) Date: Mon Aug 11 11:08:35 2008 Subject: Current problem reports assigned to freebsd-python@FreeBSD.org Message-ID: <200808111107.m7BB72tH047297@freefall.freebsd.org> Current FreeBSD problem reports Critical problems Serious problems S Tracker Resp. Description -------------------------------------------------------------------------------- a ports/108576 python databases/postgresql-plpython make fails on 6.2 / amd6 o ports/116132 python lang/Python25 - Python 2.4 -> 2.5 upgrade leaves meta- o ports/126073 python Installing lang/python25 from the meta port changes th 3 problems total. Non-critical problems S Tracker Resp. Description -------------------------------------------------------------------------------- o ports/109550 python lang/python25 does not install /usr/local/bin/python o ports/110728 python mail/py-spambayes should load config file from a stand o ports/115940 python Missed one file in lang/python25 if NO_NIS defined o ports/118301 python devel/py-setuptools easy-install.pth contents lost on o ports/119440 python lang/python25: NO_NIS=true in /etc/make.conf breaks pk o ports/122616 python databases/py-pyPgSQL - apply bytea escape bug patch in o ports/123154 python New port: devel/py-yapps2 (an easy-to-use parser gener f ports/123675 python New port: deskutils/py-labyrinth Mind mapping tool for f ports/123797 python Update port: devel/py-tables to 2.0.3 o ports/124729 python lang/python25 - Python 2.5 fails in building a package o ports/125459 python Add regression-test target for lang/python25 f ports/125730 python [PATCH] math/py-numpy: update to 1.1.0 12 problems total. From Mark.R.Thomas at aero.org Wed Aug 13 22:25:46 2008 From: Mark.R.Thomas at aero.org (Mark R Thomas) Date: Wed Aug 13 22:25:52 2008 Subject: FreeBSD Port: devel/py-setuptools In-Reply-To: <48A35A24.8040307@aero.org> References: <48A35A24.8040307@aero.org> Message-ID: <48A35EBF.1050209@aero.org> I've attached two patch files I just tested successfully with the ports system. Drop these into a "files" subdirectory in the the py-setuptools port and this should work just fine. Mark Mark Thomas wrote: > Hi, > > Setuptools fails with subversion 1.5 installed due to an inability to > parse the new subversion working copy file format. > > The issue is tracked both here: > http://bugs.python.org/setuptools/issue4 > and here: > http://bugs.python.org/issue2770 > > Though the issue appears to be resolved in the development branch of > setuptools, if the FreeBSD port intends to remain behind this, we should > apply the attached patch (available from the second link above as well). > > Thanks! > Mark Thomas > The Aerospace Corporation > El Segundo, CA > -------------- next part -------------- Index: setuptools/command/egg_info.py =================================================================== --- setuptools/command/egg_info.py (revision 61076) +++ setuptools/command/egg_info.py (working copy) @@ -217,9 +217,9 @@ data = f.read() f.close() - if data.startswith('8'): + if data.startswith('8') or data.startswith('9'): data = map(str.splitlines,data.split('\n\x0c\n')) - del data[0][0] # get rid of the '8' + del data[0][0] # get rid of the '8' or '9' dirurl = data[0][3] localrev = max([int(d[9]) for d in data if len(d)>9 and d[9]]+[0]) elif data.startswith('=6 and record[5]=="delete": continue # skip deleted From Mark.R.Thomas at aero.org Wed Aug 13 22:33:19 2008 From: Mark.R.Thomas at aero.org (Mark R Thomas) Date: Wed Aug 13 22:33:25 2008 Subject: FreeBSD Port: devel/py-setuptools Message-ID: <48A35A24.8040307@aero.org> Hi, Setuptools fails with subversion 1.5 installed due to an inability to parse the new subversion working copy file format. The issue is tracked both here: http://bugs.python.org/setuptools/issue4 and here: http://bugs.python.org/issue2770 Though the issue appears to be resolved in the development branch of setuptools, if the FreeBSD port intends to remain behind this, we should apply the attached patch (available from the second link above as well). Thanks! Mark Thomas The Aerospace Corporation El Segundo, CA -------------- next part -------------- Index: setuptools/command/egg_info.py =================================================================== --- setuptools/command/egg_info.py (revision 61076) +++ setuptools/command/egg_info.py (working copy) @@ -217,9 +217,9 @@ data = f.read() f.close() - if data.startswith('8'): + if data.startswith('8') or data.startswith('9'): data = map(str.splitlines,data.split('\n\x0c\n')) - del data[0][0] # get rid of the '8' + del data[0][0] # get rid of the '8' or '9' dirurl = data[0][3] localrev = max([int(d[9]) for d in data if len(d)>9 and d[9]]+[0]) elif data.startswith('=6 and record[5]=="delete": continue # skip deleted From db at FreeBSD.org Thu Aug 14 20:29:56 2008 From: db at FreeBSD.org (db@FreeBSD.org) Date: Thu Aug 14 20:30:03 2008 Subject: ports/125730: [PATCH] math/py-numpy: update to 1.1.0 Message-ID: <200808142029.m7EKTtIw084456@freefall.freebsd.org> Synopsis: [PATCH] math/py-numpy: update to 1.1.0 State-Changed-From-To: feedback->closed State-Changed-By: db State-Changed-When: Thu Aug 14 20:29:55 UTC 2008 State-Changed-Why: superseded by update to 1.1.1 http://www.freebsd.org/cgi/query-pr.cgi?pr=125730 From edwin at FreeBSD.org Fri Aug 15 02:00:23 2008 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Fri Aug 15 02:00:30 2008 Subject: ports/126544: [PATCH] devel/py-tables: update to 2.0.4 Message-ID: <200808150200.m7F20NV8050101@freefall.freebsd.org> Synopsis: [PATCH] devel/py-tables: update to 2.0.4 Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-python Responsible-Changed-By: edwin Responsible-Changed-When: Fri Aug 15 02:00:23 UTC 2008 Responsible-Changed-Why: freebsd-python@ wants this port PRs (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=126544 From edwin at FreeBSD.org Fri Aug 15 02:00:28 2008 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Fri Aug 15 02:00:40 2008 Subject: ports/126544: [PATCH] devel/py-tables: update to 2.0.4 Message-ID: <200808150200.m7F20SUM050178@freefall.freebsd.org> Synopsis: [PATCH] devel/py-tables: update to 2.0.4 State-Changed-From-To: open->feedback State-Changed-By: edwin State-Changed-When: Fri Aug 15 02:00:27 UTC 2008 State-Changed-Why: Awaiting maintainers feedback (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=126544 From edwin at FreeBSD.org Fri Aug 15 02:10:04 2008 From: edwin at FreeBSD.org (Edwin Groothuis) Date: Fri Aug 15 02:10:10 2008 Subject: ports/126544: [PATCH] devel/py-tables: update to 2.0.4 Message-ID: <200808150210.m7F2A4n2052730@freefall.freebsd.org> The following reply was made to PR ports/126544; it has been noted by GNATS. From: Edwin Groothuis To: quakelee@cn.freebsd.org Cc: bug-followup@FreeBSD.org Subject: Re: ports/126544: [PATCH] devel/py-tables: update to 2.0.4 Date: Fri, 15 Aug 2008 02:00:25 UT Maintainer of devel/py-tables, Please note that PR ports/126544 has just been submitted. If it contains a patch for an upgrade, an enhancement or a bug fix you agree on, reply to this email stating that you approve the patch and a committer will take care of it. The full text of the PR can be found at: http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/126544 -- Edwin Groothuis via the GNATS Auto Assign Tool edwin@FreeBSD.org From linimon at FreeBSD.org Sun Aug 17 11:33:05 2008 From: linimon at FreeBSD.org (linimon@FreeBSD.org) Date: Sun Aug 17 11:33:14 2008 Subject: FreeBSD ports that you maintain which are currently marked broken Message-ID: <20080817113303.E6CA81CD1F@mail.droso.net> Dear FreeBSD port maintainer: As part of an ongoing effort to reduce the number of problems in the FreeBSD ports system, we periodically notify users of ports that are marked as "broken" in their Makefiles. In many cases these ports are failing to compile on some subset of the FreeBSD build environments. The most common problem is that recent versions of -CURRENT include gcc4.2, which is much stricter than older versions. The next most common problem is that compiles succeed on the i386 architecture (e.g. the common Intel PC), but fail on one or more of the other architectures due to assumptions about things such as size of various types, byte-alignment issues, and so forth. In occasional cases we see that the same port may have different errors in different build environments. The script that runs on the build cluster uses heuristics to try to 'guess' the error type to help you isolate problems, but it is only a rough guide. One more note: on occasion, there are transient build errors seen on the build farm. Unfortunately, there is not yet any way for this algorithm to tell the difference (humans are much, much better at this kind of thing.) The errors are listed below. In the case where the same problem exists on more than one build environment, the URL points to the latest errorlog for that type. (By 'build environment' here we mean 'combination of 5.x/6.x/-current with target architecture'.) (Note: the dates are included to help you to gauge whether or not the error still applies to the latest version. The program that generates this report is not yet able to determine this automatically.) portname: devel/py-rbtree broken because: does not compile build errors: http://pointyhat.FreeBSD.org/errorlogs/sparc64-errorlogs/e.6.2008052822/py25-rbtree-0.8.0.log (Fri May 30 00:31:33 UTC 2008) overview: http://portsmon.FreeBSD.org/portoverview.py?category=devel&portname=py-rbtree If these errors are ones that you are already aware of, please accept our apologies and ignore this message. On the other hand, if you no longer wish to maintain this port (or ports), please reply with a message stating that, and accept our thanks for your efforts in the past. Every effort has been made to make sure that these error reports really do correspond to a port that you maintain. However, due to the fact that this is an automated process, it may indeed generate false matches. If one of these errors fits that description, please forward this email to the author of this software, Mark Linimon , so that he can attempt to fix the problem in the future. Thanks for your efforts to help improve FreeBSD. From bugmaster at FreeBSD.org Mon Aug 18 11:06:55 2008 From: bugmaster at FreeBSD.org (FreeBSD bugmaster) Date: Mon Aug 18 11:08:29 2008 Subject: Current problem reports assigned to freebsd-python@FreeBSD.org Message-ID: <200808181106.m7IB6t3n079912@freefall.freebsd.org> Current FreeBSD problem reports Critical problems Serious problems S Tracker Resp. Description -------------------------------------------------------------------------------- a ports/108576 python databases/postgresql-plpython make fails on 6.2 / amd6 o ports/116132 python lang/Python25 - Python 2.4 -> 2.5 upgrade leaves meta- o ports/126073 python Installing lang/python25 from the meta port changes th 3 problems total. Non-critical problems S Tracker Resp. Description -------------------------------------------------------------------------------- o ports/109550 python lang/python25 does not install /usr/local/bin/python o ports/110728 python mail/py-spambayes should load config file from a stand o ports/115940 python Missed one file in lang/python25 if NO_NIS defined o ports/118301 python devel/py-setuptools easy-install.pth contents lost on o ports/119440 python lang/python25: NO_NIS=true in /etc/make.conf breaks pk o ports/122616 python databases/py-pyPgSQL - apply bytea escape bug patch in o ports/123154 python New port: devel/py-yapps2 (an easy-to-use parser gener f ports/123675 python New port: deskutils/py-labyrinth Mind mapping tool for f ports/123797 python Update port: devel/py-tables to 2.0.3 o ports/124729 python lang/python25 - Python 2.5 fails in building a package o ports/125459 python Add regression-test target for lang/python25 f ports/126544 python [PATCH] devel/py-tables: update to 2.0.4 12 problems total. From edwin at FreeBSD.org Wed Aug 20 05:20:19 2008 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Wed Aug 20 05:20:25 2008 Subject: ports/126671: New port: www/py-dtflickr Spiffy Flickr API library using JSON Message-ID: <200808200520.m7K5KIjk063722@freefall.freebsd.org> Synopsis: New port: www/py-dtflickr Spiffy Flickr API library using JSON Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-python Responsible-Changed-By: edwin Responsible-Changed-When: Wed Aug 20 05:20:18 UTC 2008 Responsible-Changed-Why: freebsd-python@ wants this port PRs (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=126671 From bugmaster at FreeBSD.org Mon Aug 25 11:06:56 2008 From: bugmaster at FreeBSD.org (FreeBSD bugmaster) Date: Mon Aug 25 11:08:41 2008 Subject: Current problem reports assigned to freebsd-python@FreeBSD.org Message-ID: <200808251106.m7PB6tDW027861@freefall.freebsd.org> Current FreeBSD problem reports Critical problems Serious problems S Tracker Resp. Description -------------------------------------------------------------------------------- a ports/108576 python databases/postgresql-plpython make fails on 6.2 / amd6 o ports/116132 python lang/Python25 - Python 2.4 -> 2.5 upgrade leaves meta- o ports/126073 python Installing lang/python25 from the meta port changes th 3 problems total. Non-critical problems S Tracker Resp. Description -------------------------------------------------------------------------------- o ports/109550 python lang/python25 does not install /usr/local/bin/python o ports/110728 python mail/py-spambayes should load config file from a stand o ports/115940 python Missed one file in lang/python25 if NO_NIS defined o ports/118301 python devel/py-setuptools easy-install.pth contents lost on o ports/119440 python lang/python25: NO_NIS=true in /etc/make.conf breaks pk o ports/122616 python databases/py-pyPgSQL - apply bytea escape bug patch in o ports/123154 python New port: devel/py-yapps2 (an easy-to-use parser gener f ports/123675 python New port: deskutils/py-labyrinth Mind mapping tool for f ports/123797 python Update port: devel/py-tables to 2.0.3 o ports/124729 python lang/python25 - Python 2.5 fails in building a package o ports/125459 python Add regression-test target for lang/python25 f ports/126544 python [PATCH] devel/py-tables: update to 2.0.4 o ports/126671 python New port: www/py-dtflickr Spiffy Flickr API library us 13 problems total. From edwin at FreeBSD.org Mon Aug 25 19:10:11 2008 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Mon Aug 25 19:10:37 2008 Subject: ports/126833: [MAINTAINER] Update security/py-paramiko Message-ID: <200808251910.m7PJABMO077749@freefall.freebsd.org> Synopsis: [MAINTAINER] Update security/py-paramiko Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-python Responsible-Changed-By: edwin Responsible-Changed-When: Mon Aug 25 19:10:10 UTC 2008 Responsible-Changed-Why: freebsd-python@ wants this port PRs (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=126833 From miwi at FreeBSD.org Mon Aug 25 19:22:00 2008 From: miwi at FreeBSD.org (miwi@FreeBSD.org) Date: Mon Aug 25 19:22:11 2008 Subject: ports/126833: [MAINTAINER] Update security/py-paramiko Message-ID: <200808251921.m7PJLx81079865@freefall.freebsd.org> Synopsis: [MAINTAINER] Update security/py-paramiko Responsible-Changed-From-To: freebsd-python->miwi Responsible-Changed-By: miwi Responsible-Changed-When: Mon Aug 25 19:21:59 UTC 2008 Responsible-Changed-Why: I'll take it. http://www.freebsd.org/cgi/query-pr.cgi?pr=126833 From miwi at FreeBSD.org Mon Aug 25 21:17:15 2008 From: miwi at FreeBSD.org (miwi@FreeBSD.org) Date: Mon Aug 25 21:17:31 2008 Subject: ports/126671: New port: www/py-dtflickr Spiffy Flickr API library using JSON Message-ID: <200808252117.m7PLHEHv091101@freefall.freebsd.org> Synopsis: New port: www/py-dtflickr Spiffy Flickr API library using JSON State-Changed-From-To: open->closed State-Changed-By: miwi State-Changed-When: Mon Aug 25 21:17:14 UTC 2008 State-Changed-Why: Committed. Thanks! http://www.freebsd.org/cgi/query-pr.cgi?pr=126671 From dfilter at FreeBSD.ORG Mon Aug 25 21:20:24 2008 From: dfilter at FreeBSD.ORG (dfilter service) Date: Mon Aug 25 21:20:30 2008 Subject: ports/126671: commit references a PR Message-ID: <200808252120.m7PLKNQH091338@freefall.freebsd.org> The following reply was made to PR ports/126671; it has been noted by GNATS. From: dfilter@FreeBSD.ORG (dfilter service) To: bug-followup@FreeBSD.org Cc: Subject: Re: ports/126671: commit references a PR Date: Mon, 25 Aug 2008 21:17:43 +0000 (UTC) miwi 2008-08-25 21:17:29 UTC FreeBSD ports repository Modified files: www Makefile Added files: www/py-dtflickr Makefile distinfo pkg-descr pkg-plist Log: DT Flickr is a spiffy automagically built Flickr API library for Python using JSON. WWW: http://svn.douglasthrift.net/trac/dtflickr PR: ports/126671 Submitted by: Douglas Thrift Revision Changes Path 1.2133 +1 -0 ports/www/Makefile 1.1 +23 -0 ports/www/py-dtflickr/Makefile (new) 1.1 +3 -0 ports/www/py-dtflickr/distinfo (new) 1.1 +4 -0 ports/www/py-dtflickr/pkg-descr (new) 1.1 +19 -0 ports/www/py-dtflickr/pkg-plist (new) _______________________________________________ cvs-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/cvs-all To unsubscribe, send any mail to "cvs-all-unsubscribe@freebsd.org" From edwin at FreeBSD.org Wed Aug 27 14:40:13 2008 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Wed Aug 27 14:40:24 2008 Subject: ports/126891: New port: devel/py-wsgi_xmlrpc, WSGI application for a simple XMLRPC method dispatching. Message-ID: <200808271440.m7REeC0f039612@freefall.freebsd.org> Synopsis: New port: devel/py-wsgi_xmlrpc, WSGI application for a simple XMLRPC method dispatching. Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-python Responsible-Changed-By: edwin Responsible-Changed-When: Wed Aug 27 14:40:12 UTC 2008 Responsible-Changed-Why: freebsd-python@ wants this port PRs (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=126891 From edwin at FreeBSD.org Fri Aug 29 23:40:17 2008 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Fri Aug 29 23:40:24 2008 Subject: ports/126960: math/py-numpy - setup fails to locate atlas libraries due to faulty path in site.cfg Message-ID: <200808292340.m7TNeHeb029264@freefall.freebsd.org> Synopsis: math/py-numpy - setup fails to locate atlas libraries due to faulty path in site.cfg Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-python Responsible-Changed-By: edwin Responsible-Changed-When: Fri Aug 29 23:40:17 UTC 2008 Responsible-Changed-Why: freebsd-python@ wants this port PRs (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=126960 From edwin at FreeBSD.org Fri Aug 29 23:40:21 2008 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Fri Aug 29 23:40:34 2008 Subject: ports/126960: math/py-numpy - setup fails to locate atlas libraries due to faulty path in site.cfg Message-ID: <200808292340.m7TNeLgt029338@freefall.freebsd.org> Synopsis: math/py-numpy - setup fails to locate atlas libraries due to faulty path in site.cfg State-Changed-From-To: open->feedback State-Changed-By: edwin State-Changed-When: Fri Aug 29 23:40:21 UTC 2008 State-Changed-Why: Awaiting maintainers feedback (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=126960 From edwin at FreeBSD.org Fri Aug 29 23:50:02 2008 From: edwin at FreeBSD.org (Edwin Groothuis) Date: Fri Aug 29 23:50:09 2008 Subject: ports/126960: math/py-numpy - setup fails to locate atlas libraries due to faulty path in site.cfg Message-ID: <200808292350.m7TNo2GP029719@freefall.freebsd.org> The following reply was made to PR ports/126960; it has been noted by GNATS. From: Edwin Groothuis To: llwang@infor.org Cc: bug-followup@FreeBSD.org Subject: Re: ports/126960: math/py-numpy - setup fails to locate atlas libraries due to faulty path in site.cfg Date: Fri, 29 Aug 2008 23:40:18 UT Maintainer of math/py-numpy, Please note that PR ports/126960 has just been submitted. If it contains a patch for an upgrade, an enhancement or a bug fix you agree on, reply to this email stating that you approve the patch and a committer will take care of it. The full text of the PR can be found at: http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/126960 -- Edwin Groothuis via the GNATS Auto Assign Tool edwin@FreeBSD.org From edwin at FreeBSD.org Sat Aug 30 08:30:13 2008 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Sat Aug 30 08:30:25 2008 Subject: ports/126965: [PATCH] www/py-cssutils: update to 0.9.5.1, take maintainership Message-ID: <200808300830.m7U8UDd3005870@freefall.freebsd.org> Synopsis: [PATCH] www/py-cssutils: update to 0.9.5.1, take maintainership Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-python Responsible-Changed-By: edwin Responsible-Changed-When: Sat Aug 30 08:30:12 UTC 2008 Responsible-Changed-Why: freebsd-python@ wants this port PRs (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=126965 From miwi at FreeBSD.org Sat Aug 30 09:39:19 2008 From: miwi at FreeBSD.org (miwi@FreeBSD.org) Date: Sat Aug 30 09:39:25 2008 Subject: ports/126965: [PATCH] www/py-cssutils: update to 0.9.5.1, take maintainership Message-ID: <200808300939.m7U9dJkE012557@freefall.freebsd.org> Synopsis: [PATCH] www/py-cssutils: update to 0.9.5.1, take maintainership Responsible-Changed-From-To: freebsd-python->miwi Responsible-Changed-By: miwi Responsible-Changed-When: Sat Aug 30 09:39:18 UTC 2008 Responsible-Changed-Why: I'll take it. http://www.freebsd.org/cgi/query-pr.cgi?pr=126965 From edwin at FreeBSD.org Sun Aug 31 06:20:12 2008 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Sun Aug 31 06:20:19 2008 Subject: ports/126994: ports/math/py-sympy update to 0.6.2 Message-ID: <200808310620.m7V6KCXV048223@freefall.freebsd.org> Synopsis: ports/math/py-sympy update to 0.6.2 Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-python Responsible-Changed-By: edwin Responsible-Changed-When: Sun Aug 31 06:20:11 UTC 2008 Responsible-Changed-Why: freebsd-python@ wants this port PRs (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=126994 From edwin at FreeBSD.org Sun Aug 31 06:20:15 2008 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Sun Aug 31 06:20:28 2008 Subject: ports/126994: ports/math/py-sympy update to 0.6.2 Message-ID: <200808310620.m7V6KEx9048302@freefall.freebsd.org> Synopsis: ports/math/py-sympy update to 0.6.2 State-Changed-From-To: open->feedback State-Changed-By: edwin State-Changed-When: Sun Aug 31 06:20:14 UTC 2008 State-Changed-Why: Awaiting maintainers feedback (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=126994 From edwin at FreeBSD.org Sun Aug 31 06:30:07 2008 From: edwin at FreeBSD.org (Edwin Groothuis) Date: Sun Aug 31 06:30:13 2008 Subject: ports/126994: ports/math/py-sympy update to 0.6.2 Message-ID: <200808310630.m7V6U7kj048682@freefall.freebsd.org> The following reply was made to PR ports/126994; it has been noted by GNATS. From: Edwin Groothuis To: wenheping@gmail.com Cc: bug-followup@FreeBSD.org Subject: Re: ports/126994: ports/math/py-sympy update to 0.6.2 Date: Sun, 31 Aug 2008 06:20:13 UT Maintainer of math/py-sympy, Please note that PR ports/126994 has just been submitted. If it contains a patch for an upgrade, an enhancement or a bug fix you agree on, reply to this email stating that you approve the patch and a committer will take care of it. The full text of the PR can be found at: http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/126994 -- Edwin Groothuis via the GNATS Auto Assign Tool edwin@FreeBSD.org From wenheping at gmail.com Sun Aug 31 08:50:08 2008 From: wenheping at gmail.com (wen heping) Date: Sun Aug 31 08:50:17 2008 Subject: ports/126994: ports/math/py-sympy update to 0.6.2 Message-ID: <200808310850.m7V8o7m3091705@freefall.freebsd.org> The following reply was made to PR ports/126994; it has been noted by GNATS. From: "wen heping" To: bug-followup@freebsd.org Cc: Subject: Re: ports/126994: ports/math/py-sympy update to 0.6.2 Date: Sun, 31 Aug 2008 16:25:38 +0800 ------=_Part_13159_33142871.1220171138441 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline Thank dikshie, but it seems there are some problems in plist. I will try to update it soon. wen 20080831 On Sun, Aug 31, 2008 at 9:20 PM, Edwin Groothuis wrote: > Maintainer of math/py-sympy, > > Please note that PR ports/126994 has just been submitted. > > If it contains a patch for an upgrade, an enhancement or a bug fix > you agree on, reply to this email stating that you approve the patch > and a committer will take care of it. > > The full text of the PR can be found at: > http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/126994 > > -- > Edwin Groothuis via the GNATS Auto Assign Tool > edwin@FreeBSD.org > ------=_Part_13159_33142871.1220171138441 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline
Thank dikshie, but it seems there are some problems in plist.
I will try to update it soon.

                                                                 &nbs p;   wen 20080831

On Sun, Aug 31, 2008 at 9:20 PM, Edwin Groothuis <edwin@freebsd.org> wrote:
Maintainer of math/py-sympy,

Please note that PR ports/126994 has just been submitted.

If it contains a patch for an upgrade, an enhancement or a bug fix
you agree on, reply to this email stating that you approve the patch
and a committer will take care of it.

The full text of the PR can be found at:
   http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/126994

--
Edwin Groothuis via the GNATS Auto Assign Tool
edwin@FreeBSD.org

------=_Part_13159_33142871.1220171138441-- From linimon at FreeBSD.org Sun Aug 31 09:22:15 2008 From: linimon at FreeBSD.org (linimon@FreeBSD.org) Date: Sun Aug 31 09:22:21 2008 Subject: ports/126994: ports/math/py-sympy update to 0.6.2 Message-ID: <200808310922.m7V9MEs5094369@freefall.freebsd.org> Synopsis: ports/math/py-sympy update to 0.6.2 State-Changed-From-To: feedback->suspended State-Changed-By: linimon State-Changed-When: Sun Aug 31 09:21:29 UTC 2008 State-Changed-Why: Maintainer suggests some other changes. http://www.freebsd.org/cgi/query-pr.cgi?pr=126994 From miwi at FreeBSD.org Sun Aug 31 09:48:29 2008 From: miwi at FreeBSD.org (miwi@FreeBSD.org) Date: Sun Aug 31 09:48:37 2008 Subject: ports/126994: ports/math/py-sympy update to 0.6.2 Message-ID: <200808310948.m7V9mSLQ097217@freefall.freebsd.org> Synopsis: ports/math/py-sympy update to 0.6.2 Responsible-Changed-From-To: freebsd-python->miwi Responsible-Changed-By: miwi Responsible-Changed-When: Sun Aug 31 09:48:28 UTC 2008 Responsible-Changed-Why: I'll take it. http://www.freebsd.org/cgi/query-pr.cgi?pr=126994