(no subject)

[Wolfe, Sandra M [Ericsson Contractor for Sprint]]

Thanks, 7.2 worked fine.

I appreciate the response.



SANDRA WOLFE
Systems Administrator II

Ericsson
Phone 703-689-7604
Mobile 703-585-9320
sandra.wolfe at sprint.com
www.ericsson.com


[cid:image002.gif at 01CAA4E8.BD307D40]


This Communication is Confidential. We only send and receive email on the basis of the terms set out at www.ericsson.com/email_disclaimer<http://www.ericsson.com/email_disclaimer>
________________________________
From: John Cagle [mailto:jcagle at gmail.com]
Sent: Tuesday, February 02, 2010 6:31 PM
To: Wolfe, Sandra M [Ericsson Contractor for Sprint]
Cc: freebsd-proliant at freebsd.org
Subject: Re: (no subject)

Hi Sandra,

It appears from the following thread that you need to use the bce driver from 7.2:

http://forums.freebsd.org/showthread.php?t=9813

John
On Tue, Feb 2, 2010 at 5:09 PM, Wolfe, Sandra M [Ericsson Contractor for Sprint] <Sandra.Wolfe at sprint.com<mailto:Sandra.Wolfe at sprint.com>> wrote:
I have four new HP ProLiant DL380 G6 with a Broadcom NetXtreme II Ethernet card, HPNC 382i, dual port.  I have been able to image them with Free BSD 7.1 amd64, but the NIC cards will not come up.  I get a 'driver not attached' message in dmesg and they do not show up during the Ethernet configuration in the installation.

It looks like this NIC card is supported and it also looks like the driver is there in the kernel.  The information I have found tells me the bce driver should work.

Any ideas or suggestions?

These are the first HP servers I have worked with, all the rest are Dell and they all work great, no problems loading freebsd at all.  I wished I could have stayed with Dell, but the company changed the standard to HP, so I'm stuck with these.

Thanks.





________________________________
This e-mail may contain Sprint Nextel Company proprietary information intended for the sole use of the recipient(s). Any use by others is prohibited. If you are not the intended recipient, please contact the sender and delete all copies of the message.
_______________________________________________
freebsd-proliant at freebsd.org<mailto:freebsd-proliant at freebsd.org> mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-proliant
To unsubscribe, send any mail to "freebsd-proliant-unsubscribe at freebsd.org<mailto:freebsd-proliant-unsubscribe at freebsd.org>"


________________________________
This e-mail may contain Sprint Nextel Company proprietary information intended for the sole use of the recipient(s). Any use by others is prohibited. If you are not the intended recipient, please contact the sender and delete all copies of the message.