Routerboard RB800

[Nathan Whitehorn]

The CPU is already supported (see the MPC85XX kernel config), so the 
changes are probably minimal and maybe nonexistent. I'd be happy to do 
bring-up work as well.
-Nathan

On 09/21/13 00:07, Benjamin Perrault wrote:
> To note,
>
> NetBSD seems to have this going to multi-user with networking - so there is something to reference at least. OpenBSD is fully support on it's predecessor, the RB600A ( but they haven't got back to me on this - 4 days+, which means, officially, I'm committing AT LEAST 2 boards up for development to freeBSD. At least y'all seem interested.  )
>
> Power for these, at least how I've used them, is 48V POE - I might be able to supply an injector - working on it. They will run off a generic AC adapter - I have the specs.
>
> cheers
> -bp
>
> On Sep 20, 2013, at 9:49 PM, Adrian Chadd <adrian at freebsd.org> wrote:
>
>>
>>
>> On 20 September 2013 21:46, Benjamin Perrault <ben.perrault at gmail.com> wrote:
>> Yes. PowerPC. MPC8544 based.
>>
>>
>>
>> Ok. PPC peeps. What would it take to get this thing up and going?
>>
>> I can help with the wifi side of things; I just am not equipped at the moment to get into ppc hacking. :(
>>
>>
>>
>> -a
>>   
>>
>> On Sep 20, 2013, at 9:45 PM, Adrian Chadd <adrian at freebsd.org> wrote:
>>
>>> It's a PPC, right?
>>>
>>>
>>> -a
>>>
>>>
>>> On 20 September 2013 16:40, Benjamin Perrault <ben.perrault at gmail.com> wrote:
>>> To the freebsd embedded team,
>>>
>>> I have at least 1 - probably 2  RB800s available to contribute to get it supported by FreeBSD if someone is SERIOUS about putting in the effort. I noticed it's on the embedded want list on the wiki - so that's a start - and it's a nice platform that  could use from a proper OS ( not awful proprietary RouterOS or a linux flavor ). While netbsd has support for it, it's not something I use regularly. Additionally, work/a port on this - it will probably work on the MikroTik RB1100 and RB1100ah ( at least from looking at netbsd/linux code & mailing lists I've looked at ) and possibly a few more MPC8544 based boards - so there is additional merit beyond just this I think.
>>>
>>> While I would love to attempt this port myself - I fear I lack the apptitude ( and don't want to spew out some nasty hack ). So extending the offer of hardware is what I can contribute. The boards are located in San Francisco, but i can ship to most places without to much problem ( though anyone local I'll treat to a few pints as well for the endeavor - pre, during and post ).
>>>
>>> So if anyone is SERIOUSLY interested in the FreeBSD development team ( I don't like to see hardware go to waste ) - please let me know / contact me. I would love to see proper BSD on this platform.
>>>
>>> cheers and thanks,
>>> -bp
>>>
>>>
>>> _______________________________________________
>>> freebsd-embedded at freebsd.org mailing list
>>> http://lists.freebsd.org/mailman/listinfo/freebsd-embedded
>>> To unsubscribe, send any mail to "freebsd-embedded-unsubscribe at freebsd.org"
>>>
>>
> _______________________________________________
> freebsd-ppc at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
> To unsubscribe, send any mail to "freebsd-ppc-unsubscribe at freebsd.org"