iBook G4: moused doesn't work?

[Nathan Whitehorn]

On 12/17/11 13:25, Torfinn Ingolfsen wrote:
> On Sun, 11 Dec 2011 14:02:19 -0600
> Nathan Whitehorn<nwhitehorn at freebsd.org>  wrote:
>
>> You need to set up moused to point to the touchpad device, atp0. There's
>> an example in the atp(4) manpage, but all you need to do is to put the
>> following in rc.conf:
>> moused_enable="YES"
>> moused_port="/dev/atp0"
> Ah! (smacks forehead) I must have been low on ebergy that day.
> After adding that, the touchpad works. Thanks!
>
> One question remains: why does FreeBSD fire up a moused for usb (therer are no usb devices attatched that I know of)?
> root at kg-ibook# ps ax | grep moused
>   1380  ??  Is    0:00.00 /usr/sbin/moused -p /dev/ums0 -t auto -I /var/run/moused.ums0.pid
>   2109  ??  Is    0:00.01 /usr/sbin/moused -p /dev/atp0 -t auto
>   2150   0  R+    0:00.00 grep moused (sh)
> root at kg-ibook# dmesg | grep ums
> ums0:<vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2>  on usbus0
> ums0: 5 buttons and [XY] coordinates ID=0
>
> root at kg-ibook# usbconfig
> ugen0.1:<OHCI root HUB Apple>  at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
> ugen1.1:<OHCI root HUB NEC>  at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
> ugen2.1:<OHCI root HUB NEC>  at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
> ugen3.1:<EHCI root HUB NEC>  at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
> ugen0.2:<product 0x1000 vendor 0x05ac>  at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
> ugen0.3:<Apple Internal Trackpad Apple Computer>  at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
>
>
>

The ums etc. are the bluetooth controller's HID emulation.
-Nathan