iBook G4: moused doesn't work?

[Torfinn Ingolfsen]

On Sun, 11 Dec 2011 14:02:19 -0600
Nathan Whitehorn <nwhitehorn at freebsd.org> wrote:

> You need to set up moused to point to the touchpad device, atp0. There's 
> an example in the atp(4) manpage, but all you need to do is to put the 
> following in rc.conf:
> moused_enable="YES"
> moused_port="/dev/atp0"

Ah! (smacks forehead) I must have been low on ebergy that day.
After adding that, the touchpad works. Thanks!

One question remains: why does FreeBSD fire up a moused for usb (therer are no usb devices attatched that I know of)?
root at kg-ibook# ps ax | grep moused
 1380  ??  Is    0:00.00 /usr/sbin/moused -p /dev/ums0 -t auto -I /var/run/moused.ums0.pid
 2109  ??  Is    0:00.01 /usr/sbin/moused -p /dev/atp0 -t auto
 2150   0  R+    0:00.00 grep moused (sh)
root at kg-ibook# dmesg | grep ums
ums0: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> on usbus0
ums0: 5 buttons and [XY] coordinates ID=0

root at kg-ibook# usbconfig
ugen0.1: <OHCI root HUB Apple> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen1.1: <OHCI root HUB NEC> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen2.1: <OHCI root HUB NEC> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen3.1: <EHCI root HUB NEC> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
ugen0.2: <product 0x1000 vendor 0x05ac> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen0.3: <Apple Internal Trackpad Apple Computer> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON



-- 
Torfinn