FreeRADIUS hangs after a little while if radsec is used
Jørn Åne
jorn.dejong at uninett.no
Wed Jul 3 13:38:31 UTC 2019
Hello! I've set up a FreeRADIUS server on two separate FreeBSD systems.
When running, the service runs fine for a little while (seconds,
minutes, not hours) and then suddenly stops answering.
I run freeradius3-3.0.19 from pkg. A Gentoo box with FreeRADIUS 3.0.19
does not exhibit the same problem.
A short log is included, where the service stops answering after
seconds. In other instances, the service keeps working longer. It
answers queries corrently when it is running.
When quitting FreeRADIUS in debug mode, sometimes I have to press ^C
multiple times before it quits.
I'm not that fluent with dtrace, but I can provide a trace if anyone
tells me how to obtain it.
--
Jørn Åne
Systemutvikler
Uninett AS
jorn.dejong at uninett.no
+47 95 36 10 17
www.uninett.no
-------------- next part --------------
FreeRADIUS Version 3.0.19
Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/share/freeradius/dictionary
including dictionary file /usr/local/share/freeradius/dictionary.dhcp
including dictionary file /usr/local/share/freeradius/dictionary.vqp
including dictionary file /usr/local/etc/raddb/dictionary
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/mods-enabled/
including configuration file /usr/local/etc/raddb/mods-enabled/files
including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
including configuration file /usr/local/etc/raddb/mods-enabled/linelog
including configuration file /usr/local/etc/raddb/mods-enabled/expiration
including configuration file /usr/local/etc/raddb/mods-enabled/eap-eduroam
including configuration file /usr/local/etc/raddb/mods-enabled/expr
including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
including configuration file /usr/local/etc/raddb/mods-enabled/pap
including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap
including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
including configuration file /usr/local/etc/raddb/mods-enabled/date
including configuration file /usr/local/etc/raddb/mods-enabled/realm
including configuration file /usr/local/etc/raddb/mods-enabled/chap
including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients
including configuration file /usr/local/etc/raddb/mods-enabled/passwd
including configuration file /usr/local/etc/raddb/mods-enabled/unix
including configuration file /usr/local/etc/raddb/mods-enabled/exec
including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
including configuration file /usr/local/etc/raddb/mods-enabled/always
including configuration file /usr/local/etc/raddb/mods-enabled/soh
including configuration file /usr/local/etc/raddb/mods-enabled/digest
including configuration file /usr/local/etc/raddb/mods-enabled/logintime
including configuration file /usr/local/etc/raddb/mods-enabled/echo
including configuration file /usr/local/etc/raddb/mods-enabled/mschap
including configuration file /usr/local/etc/raddb/mods-enabled/detail
including configuration file /usr/local/etc/raddb/mods-enabled/unpack
including configuration file /usr/local/etc/raddb/mods-enabled/utf8
including configuration file /usr/local/etc/raddb/mods-enabled/replicate
including files in directory /usr/local/etc/raddb/policy.d/
including configuration file /usr/local/etc/raddb/policy.d/abfab-tr
including configuration file /usr/local/etc/raddb/policy.d/operator-name
including configuration file /usr/local/etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /usr/local/etc/raddb/policy.d/accounting
including configuration file /usr/local/etc/raddb/policy.d/filter
including configuration file /usr/local/etc/raddb/policy.d/control
including configuration file /usr/local/etc/raddb/policy.d/cui
including configuration file /usr/local/etc/raddb/policy.d/debug
including configuration file /usr/local/etc/raddb/policy.d/dhcp
including configuration file /usr/local/etc/raddb/policy.d/rfc7542
including configuration file /usr/local/etc/raddb/policy.d/eap
including configuration file /usr/local/etc/raddb/policy.d/canonicalization
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/radsec
including configuration file /usr/local/etc/raddb/sites-enabled/eduroam
main {
security {
user = "freeradius"
group = "freeradius"
allow_core_dumps = no
}
name = "radiusd"
prefix = "/usr/local"
localstatedir = "/var"
logdir = "/var/log"
run_dir = "/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr/local"
localstatedir = "/var"
sbindir = "/usr/local/sbin"
logdir = "/var/log"
run_dir = "/var/run/radiusd"
libdir = "/usr/local/lib/freeradius-3.0.19"
radacctdir = "/var/log/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client eduroam-trondheim-v6 {
ipaddr = 2001:db8:0:ff00::11
netmask = 128
require_message_authenticator = yes
secret = <<< secret >>>
shortname = "eduroam-trondheim"
virtual_server = "eduroam"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client eduroam-oslo-v6 {
ipaddr = 2001:db8:0:ff00::9
netmask = 128
require_message_authenticator = yes
secret = <<< secret >>>
shortname = "eduroam-oslo2"
virtual_server = "eduroam"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client eduroam-tromso-v6 {
ipaddr = 2001:db8:0:ff00::10
netmask = 128
require_message_authenticator = yes
secret = <<< secret >>>
shortname = "eduroam-tromso"
virtual_server = "eduroam"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client eduroam-trondheim-v4 {
ipaddr = 192.0.2.11
netmask = 32
require_message_authenticator = yes
secret = <<< secret >>>
shortname = "eduroam-trondheim"
virtual_server = "eduroam"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client eduroam-oslo-v4 {
ipaddr = 192.0.2.9
netmask = 32
require_message_authenticator = yes
secret = <<< secret >>>
shortname = "eduroam-oslo2"
virtual_server = "eduroam"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client eduroam-tromso-v4 {
ipaddr = 192.0.2.10
netmask = 32
require_message_authenticator = yes
secret = <<< secret >>>
shortname = "eduroam-tromso"
virtual_server = "eduroam"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_files
# Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files
files {
filename = "/usr/local/etc/raddb/mods-config/files/authorize"
acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy"
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/var/log/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_linelog
# Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
linelog {
filename = "/var/log/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_expiration
# Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
# Loaded module rlm_eap
# Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap-eduroam
eap {
default_eap_type = "peap"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 2048
}
# Loaded module rlm_expr
# Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
expr {
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_pap
# Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_date
# Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date
date {
format = "%b %e %Y %H:%M:%S %Z"
utc = no
}
# Loading module "wispr2date" from file /usr/local/etc/raddb/mods-enabled/date
date wispr2date {
format = "%Y-%m-%dT%H:%M:%S"
utc = no
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "bangpath" from file /usr/local/etc/raddb/mods-enabled/realm
realm bangpath {
format = "prefix"
delimiter = "!"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_unix
# Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
unix {
radwtmp = "/var/log/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_exec
# Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_detail
# Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_always
# Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_soh
# Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_digest
# Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest
# Loaded module rlm_logintime
# Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
detail {
filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_unpack
# Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack
# Loaded module rlm_utf8
# Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
# Loaded module rlm_replicate
# Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate
instantiate {
}
# Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
# Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
# Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog
# Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
# Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap-eduroam
# Linked to sub-module rlm_eap_tls
tls {
}
TLS section "tls" missing, trying to use legacy configuration
tls {
verify_depth = 0
ca_path = "/usr/local/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/usr/local/etc/raddb/certs/server.key"
certificate_file = "/usr/local/etc/raddb/certs/server.pem"
ca_file = "/usr/local/etc/raddb/certs/ca.pem"
dh_file = "/usr/local/etc/raddb/certs/dh"
random_file = "/dev/urandom"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
tls_max_version = ""
tls_min_version = "1.0"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = no
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
default_eap_type = "mschapv2"
copy_request_to_tunnel = yes
use_tunneled_reply = yes
virtual_server = "eduroam-inner-tunnel"
include_length = yes
require_client_cert = no
}
TLS section "tls" missing, trying to use legacy configuration
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = yes
use_tunneled_reply = yes
proxy_tunneled_request_as_eap = yes
virtual_server = "eduroam-inner-tunnel"
soh = no
require_client_cert = no
}
TLS section "tls" missing, trying to use legacy configuration
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response
# Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
# Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
# Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
# Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
# Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
# Instantiating module "bangpath" from file /usr/local/etc/raddb/mods-enabled/realm
# Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
# Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
# Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
# Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
# Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always
# Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always
# Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always
# Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always
# Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
# Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
# Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
# Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always
# Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always
# Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
# Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
} # server
server eduroam { # from file /usr/local/etc/raddb/sites-enabled/eduroam
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading preacct {...}
# Loading pre-proxy {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server eduroam
server eduroam-inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/eduroam
# Loading authenticate {...}
# Loading authorize {...}
# Loading post-auth {...}
} # server eduroam-inner-tunnel
thread pool {
start_servers = 5
max_servers = 32
min_spare_servers = 3
max_spare_servers = 10
max_requests_per_server = 0
cleanup_delay = 5
max_queue_size = 65536
auto_limit_acct = no
}
Thread 1 waiting to be assigned a request
Thread spawned new child 1. Total threads in pool: 1
Thread spawned new child 2. Total threads in pool: 2
Thread spawned new child 3. Total threads in pool: 3
Thread spawned new child 4. Total threads in pool: 4
Thread spawned new child 5. Total threads in pool: 5
Thread pool initialized
radiusd: #### Opening IP addresses and Ports ####
Thread 3 waiting to be assigned a request
Thread 5 waiting to be assigned a request
listen {
type = "auth+acct"
virtual_server = "eduroam"
ipaddr = *
port = 2083
proto = "tcp"
tls {
verify_depth = 0
ca_path = "/usr/local/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/usr/local/etc/raddb/certs/radsec.pem"
certificate_file = "/usr/local/etc/raddb/certs/radsec.pem"
ca_file = "/usr/local/etc/raddb/certs/edupki.pem"
private_key_password = <<< secret >>>
dh_file = "/usr/local/etc/raddb/certs/dh"
fragment_size = 8192
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
tls_max_version = ""
tls_min_version = "1.0"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = no
use_nonce = yes
timeout = 0
softfail = no
}
}
Thread 2 waiting to be assigned a request
Thread 4 waiting to be assigned a request
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
clients = "radsec_v4"
client any {
ipaddr = 0.0.0.0/0
require_message_authenticator = no
secret = <<< secret >>>
proto = "tls"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
}
listen {
type = "auth+acct"
virtual_server = "eduroam"
ipaddr = ::
port = 2083
proto = "tcp"
tls {
verify_depth = 0
ca_path = "/usr/local/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/usr/local/etc/raddb/certs/radsec.pem"
certificate_file = "/usr/local/etc/raddb/certs/radsec.pem"
ca_file = "/usr/local/etc/raddb/certs/edupki.pem"
private_key_password = <<< secret >>>
dh_file = "/usr/local/etc/raddb/certs/dh"
fragment_size = 8192
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
tls_max_version = ""
tls_min_version = "1.0"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = no
use_nonce = yes
timeout = 0
softfail = no
}
}
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
clients = "radsec_v6"
client any {
ipaddr = ::
require_message_authenticator = no
secret = <<< secret >>>
proto = "tls"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
}
listen {
type = "auth"
ipaddr = 0.0.0.0
port = 0
}
Listening on auth+acct proto tcp address * port 2083 (TLS) bound to server eduroam
Listening on auth+acct proto tcp address :: port 2083 (TLS) bound to server eduroam
Listening on auth address * port 1812 bound to server eduroam
Listening on proxy address * port 15113
Listening on proxy address :: port 48027
Ready to process requests
... new connection request on TCP socket
Listening on auth+acct from client (192.0.2.11, 33827) -> (*, 2083, virtual-server=eduroam)
Waking up in 0.4 seconds.
(0) Initiating new TLS session
(0) (other): before SSL initialization
(0) TLS_accept: before SSL initialization
(0) TLS_accept: before SSL initialization
(0) <<< recv TLS 1.3 [length 010e]
(0) TLS_accept: SSLv3/TLS read client hello
(0) >>> send TLS 1.2 [length 0039]
(0) TLS_accept: SSLv3/TLS write server hello
(0) >>> send TLS 1.2 [length 0373]
(0) TLS_accept: SSLv3/TLS write certificate
(0) >>> send TLS 1.2 [length 014d]
(0) TLS_accept: SSLv3/TLS write key exchange
(0) >>> send TLS 1.2 [length 0004]
(0) TLS_accept: SSLv3/TLS write server done
(0) TLS_accept: Need to read more data: SSLv3/TLS write server done
(0) TLS - In Handshake Phase
(0) TLS - got 1297 bytes of data
Waking up in 0.4 seconds.
(0) TLS_accept: SSLv3/TLS write server done
(0) <<< recv TLS 1.2 [length 0046]
(0) TLS_accept: SSLv3/TLS read client key exchange
(0) TLS_accept: SSLv3/TLS read change cipher spec
(0) <<< recv TLS 1.2 [length 0010]
(0) TLS_accept: SSLv3/TLS read finished
(0) >>> send TLS 1.2 [length 0001]
(0) TLS_accept: SSLv3/TLS write change cipher spec
(0) >>> send TLS 1.2 [length 0010]
(0) TLS_accept: SSLv3/TLS write finished
(0) (other): SSL negotiation finished successfully
(0) TLS - Connection Established
(0) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(0) TLS-Session-Version = "TLS 1.2"
(0) TLS - got 51 bytes of data
Waking up in 0.4 seconds.
(0) Application data status 7
(0) tls_recv: Status-Server packet from host 192.0.2.11 port 33827, id=0, length=38
Threads: total/active/spare threads = 5/0/5
Waking up in 0.3 seconds.
Thread 1 got semaphore
Thread 1 handling request 0, (1 handled so far)
(0) Received Status-Server Id 0 from 192.0.2.11:33827 to 0.0.0.0:2083 length 38
(0) Message-Authenticator = 0xa36f9b4a55b3cfe70ee3310b86355137
(0) Sent Access-Accept Id 0 from 0.0.0.0:2083 to 192.0.2.11:33827 length 0
(0) Finished request
Thread 1 waiting to be assigned a request
Waking up in 0.1 seconds.
Waking up in 4.5 seconds.
... new connection request on TCP socket
Listening on auth+acct from client (192.0.2.9, 40447) -> (*, 2083, virtual-server=eduroam)
Waking up in 0.4 seconds.
(0) Initiating new TLS session
(0) (other): before SSL initialization
(0) TLS_accept: before SSL initialization
(0) TLS_accept: before SSL initialization
(0) <<< recv TLS 1.3 [length 010e]
(0) TLS_accept: SSLv3/TLS read client hello
(0) >>> send TLS 1.2 [length 0039]
(0) TLS_accept: SSLv3/TLS write server hello
(0) >>> send TLS 1.2 [length 0373]
(0) TLS_accept: SSLv3/TLS write certificate
(0) >>> send TLS 1.2 [length 014d]
(0) TLS_accept: SSLv3/TLS write key exchange
(0) >>> send TLS 1.2 [length 0004]
(0) TLS_accept: SSLv3/TLS write server done
(0) TLS_accept: Need to read more data: SSLv3/TLS write server done
(0) TLS - In Handshake Phase
(0) TLS - got 1297 bytes of data
Waking up in 0.4 seconds.
... new connection request on TCP socket
Listening on auth+acct from client (192.0.2.10, 35405) -> (*, 2083, virtual-server=eduroam)
Waking up in 0.3 seconds.
(0) Initiating new TLS session
(0) (other): before SSL initialization
(0) TLS_accept: before SSL initialization
(0) TLS_accept: before SSL initialization
(0) <<< recv TLS 1.3 [length 010e]
(0) TLS_accept: SSLv3/TLS read client hello
(0) >>> send TLS 1.2 [length 0039]
(0) TLS_accept: SSLv3/TLS write server hello
(0) >>> send TLS 1.2 [length 0373]
(0) TLS_accept: SSLv3/TLS write certificate
(0) >>> send TLS 1.2 [length 014d]
(0) TLS_accept: SSLv3/TLS write key exchange
(0) >>> send TLS 1.2 [length 0004]
(0) TLS_accept: SSLv3/TLS write server done
(0) TLS_accept: Need to read more data: SSLv3/TLS write server done
(0) TLS - In Handshake Phase
(0) TLS - got 1297 bytes of data
Waking up in 0.3 seconds.
(0) TLS_accept: SSLv3/TLS write server done
(0) <<< recv TLS 1.2 [length 0046]
(0) TLS_accept: SSLv3/TLS read client key exchange
(0) TLS_accept: SSLv3/TLS read change cipher spec
(0) <<< recv TLS 1.2 [length 0010]
(0) TLS_accept: SSLv3/TLS read finished
(0) >>> send TLS 1.2 [length 0001]
(0) TLS_accept: SSLv3/TLS write change cipher spec
(0) >>> send TLS 1.2 [length 0010]
(0) TLS_accept: SSLv3/TLS write finished
(0) (other): SSL negotiation finished successfully
(0) TLS - Connection Established
(0) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(0) TLS-Session-Version = "TLS 1.2"
(0) TLS - got 51 bytes of data
Waking up in 0.3 seconds.
(0) Application data status 7
(0) tls_recv: Status-Server packet from host 192.0.2.10 port 35405, id=0, length=38
Waking up in 0.2 seconds.
Thread 3 got semaphore
Thread 3 handling request 1, (1 handled so far)
(1) Received Status-Server Id 0 from 192.0.2.10:35405 to 0.0.0.0:2083 length 38
(1) Message-Authenticator = 0x609af2132a81cf367f8dd843a4cc32d4
(1) Sent Access-Accept Id 0 from 0.0.0.0:2083 to 192.0.2.10:35405 length 0
(1) Finished request
Thread 3 waiting to be assigned a request
Waking up in 0.5 seconds.
(0) Cleaning up request packet ID 0 with timestamp +3
Waking up in 4.1 seconds.
Closing TLS socket from client port 40447
Client has closed connection
... shutting down socket auth+acct from client (192.0.2.9, 40447) -> (*, 2083, virtual-server=eduroam)
Waking up in 0.1 seconds.
(1) Cleaning up request packet ID 0 with timestamp +7
Waking up in 2.8 seconds.
... cleaning up socket auth+acct from client (192.0.2.9, 40447) -> (*, 2083, virtual-server=eduroam)
Waking up in 17.9 seconds.
(0) Application data status 7
(0) tls_recv: Status-Server packet from host 192.0.2.11 port 33827, id=0, length=38
Waking up in 0.3 seconds.
Thread 5 got semaphore
Thread 5 handling request 2, (1 handled so far)
(2) Received Status-Server Id 0 from 192.0.2.11:33827 to 0.0.0.0:2083 length 38
(2) Message-Authenticator = 0xdec2ab213ede5a4614beba29cd543737
(2) Sent Access-Accept Id 0 from 0.0.0.0:2083 to 192.0.2.11:33827 length 0
(2) Finished request
Thread 5 waiting to be assigned a request
Waking up in 3.1 seconds.
Waking up in 1.5 seconds.
(2) Cleaning up request packet ID 0 with timestamp +30
Waking up in 2.4 seconds.
Reached idle timeout on socket auth+acct from client (192.0.2.10, 35405) -> (*, 2083, virtual-server=eduroam)
... shutting down socket auth+acct from client (192.0.2.10, 35405) -> (*, 2083, virtual-server=eduroam)
Waking up in 2.9 seconds.
... new connection request on TCP socket
Listening on auth+acct from client (192.0.2.10, 42061) -> (*, 2083, virtual-server=eduroam)
Waking up in 0.4 seconds.
(0) Initiating new TLS session
(0) (other): before SSL initialization
(0) TLS_accept: before SSL initialization
(0) TLS_accept: before SSL initialization
(0) <<< recv TLS 1.3 [length 010e]
(0) TLS_accept: SSLv3/TLS read client hello
(0) >>> send TLS 1.2 [length 0039]
(0) TLS_accept: SSLv3/TLS write server hello
(0) >>> send TLS 1.2 [length 0373]
(0) TLS_accept: SSLv3/TLS write certificate
(0) >>> send TLS 1.2 [length 014d]
(0) TLS_accept: SSLv3/TLS write key exchange
(0) >>> send TLS 1.2 [length 0004]
(0) TLS_accept: SSLv3/TLS write server done
(0) TLS_accept: Need to read more data: SSLv3/TLS write server done
(0) TLS - In Handshake Phase
(0) TLS - got 1297 bytes of data
Waking up in 0.4 seconds.
(0) TLS_accept: SSLv3/TLS write server done
(0) <<< recv TLS 1.2 [length 0046]
(0) TLS_accept: SSLv3/TLS read client key exchange
(0) TLS_accept: SSLv3/TLS read change cipher spec
(0) <<< recv TLS 1.2 [length 0010]
(0) TLS_accept: SSLv3/TLS read finished
(0) >>> send TLS 1.2 [length 0001]
(0) TLS_accept: SSLv3/TLS write change cipher spec
(0) >>> send TLS 1.2 [length 0010]
(0) TLS_accept: SSLv3/TLS write finished
(0) (other): SSL negotiation finished successfully
(0) TLS - Connection Established
(0) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(0) TLS-Session-Version = "TLS 1.2"
(0) TLS - got 51 bytes of data
Waking up in 0.4 seconds.
(0) Application data status 7
(0) tls_recv: Status-Server packet from host 192.0.2.10 port 42061, id=0, length=38
Waking up in 0.3 seconds.
Thread 2 got semaphore
Thread 2 handling request 3, (1 handled so far)
(3) Received Status-Server Id 0 from 192.0.2.10:42061 to 0.0.0.0:2083 length 38
(3) Message-Authenticator = 0x1c80198f6bfd2bb47129b5cd9e107e16
(3) Sent Access-Accept Id 0 from 0.0.0.0:2083 to 192.0.2.10:42061 length 0
(3) Finished request
Thread 2 waiting to be assigned a request
Waking up in 2.5 seconds.
... cleaning up socket auth+acct from client (192.0.2.10, 35405) -> (*, 2083, virtual-server=eduroam)
Waking up in 2.0 seconds.
(3) Cleaning up request packet ID 0 with timestamp +37
Waking up in 17.9 seconds.
... new connection request on TCP socket
Listening on auth+acct from client (192.0.2.9, 38547) -> (*, 2083, virtual-server=eduroam)
Waking up in 0.4 seconds.
(0) Initiating new TLS session
(0) (other): before SSL initialization
(0) TLS_accept: before SSL initialization
(0) TLS_accept: before SSL initialization
(0) <<< recv TLS 1.3 [length 010e]
(0) TLS_accept: SSLv3/TLS read client hello
(0) >>> send TLS 1.2 [length 0039]
(0) TLS_accept: SSLv3/TLS write server hello
(0) >>> send TLS 1.2 [length 0373]
(0) TLS_accept: SSLv3/TLS write certificate
(0) >>> send TLS 1.2 [length 014d]
(0) TLS_accept: SSLv3/TLS write key exchange
(0) >>> send TLS 1.2 [length 0004]
(0) TLS_accept: SSLv3/TLS write server done
(0) TLS_accept: Need to read more data: SSLv3/TLS write server done
(0) TLS - In Handshake Phase
(0) TLS - got 1297 bytes of data
Waking up in 0.4 seconds.
(0) TLS_accept: SSLv3/TLS write server done
(0) <<< recv TLS 1.2 [length 0046]
(0) TLS_accept: SSLv3/TLS read client key exchange
(0) TLS_accept: SSLv3/TLS read change cipher spec
(0) <<< recv TLS 1.2 [length 0010]
(0) TLS_accept: SSLv3/TLS read finished
(0) >>> send TLS 1.2 [length 0001]
(0) TLS_accept: SSLv3/TLS write change cipher spec
(0) >>> send TLS 1.2 [length 0010]
(0) TLS_accept: SSLv3/TLS write finished
(0) (other): SSL negotiation finished successfully
(0) TLS - Connection Established
(0) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(0) TLS-Session-Version = "TLS 1.2"
(0) TLS - got 51 bytes of data
Waking up in 0.4 seconds.
(0) Application data status 7
(0) tls_recv: Access-Request packet from host 192.0.2.9 port 38547, id=43, length=244
Waking up in 0.3 seconds.
Thread 4 got semaphore
Thread 4 handling request 4, (1 handled so far)
(4) Received Access-Request Id 43 from 192.0.2.9:38547 to 0.0.0.0:2083 length 244
(4) User-Name = "eduroam at example.com"
(4) NAS-IP-Address = 192.0.2.82
(4) NAS-Port = 0
(4) NAS-Identifier = "192.0.2.82"
(4) NAS-Port-Type = Wireless-802.11
(4) Calling-Station-Id = "38F9D36FB080"
(4) Called-Station-Id = "000B86B76F7F"
(4) Service-Type = Framed-User
(4) Framed-MTU = 1100
(4) EAP-Message = 0x0201001d01656475726f616d406672696467652e6679726b61742e6e6f
(4) Aruba-Essid-Name = "eduroam"
(4) Aruba-Location-Id = "ap4-2"
(4) Aruba-AP-Group = "Teknobyen-AP220"
(4) Aruba-Device-Type = "OS X"
(4) Message-Authenticator = 0xc6772332ef5104c2d2dc3292d7fc1a8b
(4) Operator-Name = "1uninett.no"
(4) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/eduroam
(4) authorize {
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: Looking up realm "example.com" for User-Name = "eduroam at example.com"
(4) suffix: No such realm "example.com"
(4) [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 1 length 29
(4) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /usr/local/etc/raddb/sites-enabled/eduroam
(4) authenticate {
(4) eap: Peer sent packet with method EAP Identity (1)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Initiating new TLS session
(4) eap_peap: [eaptls start] = request
(4) eap: Sending EAP Request (code 1) ID 2 length 6
(4) eap: EAP session adding &reply:State = 0x7b0fddde7b0dc48c
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) Post-Auth-Type sub-section not found. Ignoring.
(4) # Executing group from file /usr/local/etc/raddb/sites-enabled/eduroam
(4) Sent Access-Challenge Id 43 from 0.0.0.0:2083 to 192.0.2.9:38547 length 0
(4) EAP-Message = 0x010200061920
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0x7b0fddde7b0dc48cd712cbbe3e711cf0
(4) Finished request
Thread 4 waiting to be assigned a request
(0) Application data status 7
(0) tls_recv: Status-Server packet from host 192.0.2.9 port 38547, id=0, length=38
Waking up in 0.3 seconds.
Thread 1 got semaphore
Thread 1 handling request 5, (2 handled so far)
(5) Received Status-Server Id 0 from 192.0.2.9:38547 to 0.0.0.0:2083 length 38
(5) Message-Authenticator = 0xa80e005326ef399f87a8a34bbd549ed7
(5) Sent Access-Accept Id 0 from 0.0.0.0:2083 to 192.0.2.9:38547 length 0
Waking up in 0.4 seconds.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <http://lists.freebsd.org/pipermail/freebsd-ports/attachments/20190703/854739d9/attachment.sig>
More information about the freebsd-ports
mailing list