On Fri, Jun 1, 2012 at 12:02 AM, Sergio de Almeida Lenzi
<lenzi.sergio at gmail.com> wrote:
> Em Qui, 2012-05-31 às 17:31 +0200, Leslie Jensen escreveu:
>
>>
>> 2012-05-31 14:24, Robert Huff skrev:
>> >
>> > Leslie Jensen writes:
>> >
>> >> -----------------------------------------------------------------------
>> >> Oh dear - something failed during the build - sorry !
>> >> For more help with debugging build errors, please see the section in:
>> >> http://wiki.documentfoundation.org/Development
>> >>
>> >> internal build errors:
>> >>
>> >> ERROR: error 65280 occurred while making
>> >> /usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/vcl/prj
>> >>
>> >> it seems that the error is inside 'vcl', please re-run build
>> >> inside this module to isolate the error and/or test your fix:
>> >> -----------------------------------------------------------------------
>> >>
>> >> /usr/local/bin/bash
>> >> cd /usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2
>> >> source ./Env.Host.sh
>> >> cd vcl
>> >> gmake clean # optional
>> >> gmake -r
>> >>
>> >> when the problem is isolated and fixed exit and re-run 'make' from the
>> >> top-level
>> >
>> >
>> > Did you follow the instructions?
>> >
>> >
>> > Robert Huff
>> >
>> > _______________________________________________
>> > freebsd-ports at freebsd.org mailing list
>> > http://lists.freebsd.org/mailman/listinfo/freebsd-ports
>> > To unsubscribe, send any mail to "freebsd-ports-unsubscribe at freebsd.org"
>>
>>
>>
>> After four manual procedures I'm getting stuck here.
>>
>> What can I do?
>>
>> --------------------------------------------------
>> [ build MOD ] writerperfect
>> Bus error (core dumped)
>> File tested,Test Result,Execution Time (ms)
>> file:///usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/lotuswordpro/qa/cppunit/data/pass/A14.lwp,Signal
>> 11 during cups initialization called, ignoring cups
>>
>> Error: a unit test failed, please do one of:
>>
>> export DEBUGCPPUNIT=TRUE # for exception catching
>> export GDBCPPUNITTRACE="gdb --args" # for interactive debugging
>> export VALGRIND=memcheck # for memory checking
>> and retry.
>> gmake[1]: ***
>> [/usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/workdir/unxfbsd.pro/CppunitTest/lotuswordpro_test_lotuswordpro.test]
>> Error 1
>> gmake[1]: *** Inväntar oavslutade jobb...
>> TEMPFILE=/tmp/gbuild.XXXXXX.gNM6YJsj && mv ${TEMPFILE}
>> /usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/workdir/unxfbsd.pro/LinkTarget/Library/writerfilter_uno.uno.so.objectlist
>> gmake[1]: Lämnar katalogen
>> "/usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/tail_build"
>> gmake: *** [source-env-and-recurse] Error 2
>> ________________________________________________
>>
>> _______________________________________________
>> freebsd-ports at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-ports
>> To unsubscribe, send any mail to "freebsd-ports-unsubscribe at freebsd.org"
>
> there is an error in the lotuswordpro testing... if you are not going
> to use lotuswrordpro....
> apply these patch at the
> /usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2
>
> ==================
> --- lotuswordpro/Module_lotuswordpro.mk.orig 2012-05-31
> 19:34:52.014043605 -0300
> +++ lotuswordpro/Module_lotuswordpro.mk 2012-05-31 19:29:29.276164732
> -0300
> @@ -31,8 +31,8 @@
> Library_lwpft \
> ))
>
> -$(eval $(call gb_Module_add_check_targets,lotuswordpro,\
> - CppunitTest_lotuswordpro_test_lotuswordpro \
> -))
> +#$(eval $(call gb_Module_add_check_targets,lotuswordpro,\
> +# CppunitTest_lotuswordpro_test_lotuswordpro \
> +#))
>
> # vim: set noet sw=4 ts=4:
> =============================
I hit the same problem, applied the suggested patch and tried gmake
(in lotuswordpro) again.
/usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/solenv/gbuild/Library.mk:54:
*** gb_Deliver_deliver: file does not exist in solver, and cannot be
delivered: /usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/solver/unxfbsd.pro/lib/libsfxlo.so.
Stop.
gmake[1]: *** Waiting for unfinished jobs....
rm /usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/workdir/unxfbsd.pro/ExternalHeaders/Library/libsvxcorelo.so
/usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/workdir/unxfbsd.pro/ExternalHeaders/Library/libsvtlo.so
/usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/workdir/unxfbsd.pro/ExternalHeaders/Library/libsfxlo.so
gmake[1]: Leaving directory
`/usr/ports/editors/libreoffice/work/libreoffice-core-3.5.2.2/lotuswordpro'
gmake: *** [source-env-and-recurse] Error 2
Any idea how I can proceed?
--
R. Kevin Oberman, Network Engineer
E-mail: kob6558 at gmail.com