[HEADS UP] Xorg 7.5 merge comming tomorrow.

David Wolfskill david at catwhisker.org
Sun May 2 20:17:23 UTC 2010


The CVS mirror I use apparently didn't get the Xorg 7.5 updates as of my
daily update yesterday, but I seem to have the updates today, so I tried
using portmaster -- largely with good success.

Save for points when the wireless NIC on my laptop went flaky, it seems
to have gone with but a single "hitch": x11-drivers/xf86-input-hyperpen
(xf86-input-hyperpen-1.3.0_2 -> xf86-input-hyperpen-1.3.0_3) failed.

The Maefile is at 1.7, updated 2010/05/01 11:40:32 miwi.

After I completed everything else by excluding that port, I tried
updating it once more; here's what happened:

...
===>>> Proceed? y/n [y] 

===>>> Starting build for for ports that need updating <<<===

===>>> Launching child to update xf86-input-hyperpen-1.3.0_2
]0;portmaster: All >> xf86-input-hyperpen-1.3.0_2 (1/1)
===>>> Port directory: /usr/ports/x11-drivers/xf86-input-hyperpen
===>>> Starting check for build dependencies
===>>> Gathering dependency list for x11-drivers/xf86-input-hyperpen from ports
===>>> Starting dependency check
===>>> Dependency check complete for x11-drivers/xf86-input-hyperpen
]0;portmaster: All >> xf86-input-hyperpen-1.3.0_2 (1/1)===>  Cleaning for xf86-input-hyperpen-1.3.0_3

===>  Vulnerability check disabled, database not found
===>  Extracting for xf86-input-hyperpen-1.3.0_3
=> MD5 Checksum OK for xorg/driver/xf86-input-hyperpen-1.3.0.tar.bz2.
=> SHA256 Checksum OK for xorg/driver/xf86-input-hyperpen-1.3.0.tar.bz2.
===>  Patching for xf86-input-hyperpen-1.3.0_3
===>   xf86-input-hyperpen-1.3.0_3 depends on file: /usr/local/libdata/pkgconfig/randrproto.pc - found
===>   xf86-input-hyperpen-1.3.0_3 depends on file: /usr/local/libdata/pkgconfig/inputproto.pc - found
===>   xf86-input-hyperpen-1.3.0_3 depends on file: /usr/local/libdata/pkgconfig/xorg-server.pc - found
===>   xf86-input-hyperpen-1.3.0_3 depends on file: /usr/local/libdata/pkgconfig/xproto.pc - found
===>   xf86-input-hyperpen-1.3.0_3 depends on file: /usr/local/libdata/pkgconfig/xi.pc - found
===>   xf86-input-hyperpen-1.3.0_3 depends on executable: pkg-config - found
===>  Configuring for xf86-input-hyperpen-1.3.0_3
checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/local/bin/gmkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking build system type... i386-portbld-freebsd7.3
checking host system type... i386-portbld-freebsd7.3
checking for style of include used by make... GNU
checking for gcc... cc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking dependency style of cc... gcc3
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ld used by cc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognize dependent libraries... pass_all
checking how to run the C preprocessor... cc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking whether we are using the GNU C++ compiler... yes
checking whether c++ accepts -g... yes
checking dependency style of c++... gcc3
checking how to run the C++ preprocessor... c++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether  accepts -g... no
checking the maximum length of command line arguments... (cached) 262144
checking command to parse /usr/bin/nm -B output from cc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if cc supports -fno-rtti -fno-exceptions... no
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc static flag -static works... yes
checking if cc supports -c -o file.o... yes
checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... freebsd7.3 ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by c++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes
checking for c++ option to produce PIC... -fPIC
checking if c++ PIC flag -fPIC works... yes
checking if c++ static flag -static works... yes
checking if c++ supports -c -o file.o... yes
checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... freebsd7.3 ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking for gcc... (cached) cc
checking whether we are using the GNU C compiler... (cached) yes
checking whether cc accepts -g... (cached) yes
checking for cc option to accept ISO C89... (cached) none needed
checking dependency style of cc... (cached) gcc3
checking if RANDR is defined... yes
checking if XINPUT is defined... no
checking for pkg-config... /usr/local/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for XORG... yes
checking for ANSI C header files... (cached) yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating man/Makefile
config.status: creating config.h
config.status: executing depfiles commands
===>  Building for xf86-input-hyperpen-1.3.0_3
/usr/bin/make  all-recursive
Making all in src
/bin/sh ../libtool --tag=CC    --mode=compile cc -DHAVE_CONFIG_H -I. -I..      -O2 -fno-strict-aliasing -pipe -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include    -I../src -MT xf86HyperPen.lo -MD -MP -MF .deps/xf86HyperPen.Tpo -c -o xf86HyperPen.lo xf86HyperPen.c
mkdir .libs
 cc -DHAVE_CONFIG_H -I. -I.. -O2 -fno-strict-aliasing -pipe -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include -I../src -MT xf86HyperPen.lo -MD -MP -MF .deps/xf86HyperPen.Tpo -c xf86HyperPen.c  -fPIC -DPIC -o .libs/xf86HyperPen.o
xf86HyperPen.c: In function 'xf86HypOpenDevice':
xf86HyperPen.c:737: error: too few arguments to function 'InitValuatorAxisStruct'
xf86HyperPen.c:744: error: too few arguments to function 'InitValuatorAxisStruct'
xf86HyperPen.c:751: error: too few arguments to function 'InitValuatorAxisStruct'
xf86HyperPen.c: In function 'xf86HypProc':
xf86HyperPen.c:782: warning: passing argument 3 of 'InitButtonClassDeviceStruct' from incompatible pointer type
xf86HyperPen.c:782: error: too few arguments to function 'InitButtonClassDeviceStruct'
xf86HyperPen.c:809: warning: passing argument 3 of 'InitValuatorClassDeviceStruct' makes pointer from integer without a cast
xf86HyperPen.c:809: error: too few arguments to function 'InitValuatorClassDeviceStruct'
*** Error code 1

Stop in /bkp/ports/x11-drivers/xf86-input-hyperpen/work/xf86-input-hyperpen-1.3.0/src.
*** Error code 1

Stop in /bkp/ports/x11-drivers/xf86-input-hyperpen/work/xf86-input-hyperpen-1.3.0.
*** Error code 1

Stop in /bkp/ports/x11-drivers/xf86-input-hyperpen/work/xf86-input-hyperpen-1.3.0.
*** Error code 1

Stop in /bkp/ports/x11-drivers/xf86-input-hyperpen.

===>>> make failed for x11-drivers/xf86-input-hyperpen
===>>> Aborting update

===>>> Update for xf86-input-hyperpen-1.3.0_2 failed
===>>> Aborting update

g1-192(7.3-S)[9] ^D
Script done on Sun May  2 13:01:49 2010



Now, I don't know that I really use the driver in question, but it might
be nice to clean it up.  Any information I might provide?

I was building under:

g1-192(7.3-S)[5] uname -v
FreeBSD 7.3-STABLE #103 r207433: Fri Apr 30 05:24:15 PDT 2010     root at g1-190.catwhisker.org:/common/S2/obj/usr/src/sys/CANARY 
g1-192(7.3-S)[6] 


Peace,
david
-- 
David H. Wolfskill				david at catwhisker.org
Depriving a girl or boy of an opportunity for education is evil.

See http://www.catwhisker.org/~david/publickey.gpg for my public key.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 195 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-ports/attachments/20100502/2dc997df/attachment.pgp


More information about the freebsd-ports mailing list