[Call for Testing] X.org 7.5 for FreeBSD

[Robert Noland]

On Sat, 2010-03-13 at 15:05 +0100, Torfinn Ingolfsen wrote:
> Hi,
> 
> On Sat, Mar 13, 2010 at 1:48 PM, Robert Noland <rnoland at freebsd.org>
> wrote:
>         
>         
>         Ok, now that agp seems to be working... I have created a port
>         for the
>         2.9.1 version of the Intel driver.  You will need to uninstall
>         the
>         existing intel driver and install this one.  You still won't
>         have drm,
>         but should be a good bit better than vesa...
>         
>         http://people.freebsd.org/~rnoland/xf86-video-intel29.tar.gz
>         
>         Please let me know how it goes.  You will likely want to use
>         UXA
>         acceleration with this driver.
> 
> deinstalledc the old intel driver, installed the new, and tried
> 'startx' as root.
> Well, it didn't work. From /var/log/Xorg.0.log:
> (II) Module "ramdac" already built-in
> drmOpenDevice: node name is /dev/dri/card0
> Failed to change owner or group for file /dev/dri! 2: No such file or
> directory
> Failed to change owner or group for file /dev/dri/card0! 2: No such
> file or directory
> drmOpenDevice: open result is -1, (No such file or directory)
> Failed to change owner or group for file /dev/dri/card0! 2: No such
> file or directory
> drmOpenDevice: open result is -1, (No such file or directory)
> drmOpenDevice: Open failed
> [drm] failed to load kernel module "i915"
> (EE) intel(0): [drm] Failed to open DRM device for pci:0000:00:02.0:
> File exists
> (EE) intel(0): Failed to become DRM master.
> (**) intel(0): Depth 24, (--) framebuffer bpp 32
> (==) intel(0): RGB weight 888
> (==) intel(0): Default visual is TrueColor
> (II) intel(0): Integrated Graphics Chipset: Intel(R) Clarkdale
> (--) intel(0): Chipset: "Clarkdale"
> (--) intel(0): Linear framebuffer at 0xD0000000
> (--) intel(0): IO registers at addr 0xFB800000 size 4194304
> (II) intel(0): No SDVO device is found in VBT
> (II) intel(0): 2 display pipes available.
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Module "ddc" already built-in
> (II) Loading sub module "i2c"
> (II) LoadModule: "i2c"
> (II) Module "i2c" already built-in
> (II) intel(0): Output VGA using monitor section Monitor0
> (==) intel(0): Write-combining range (0xa0000,0x10000) was already
> clear
> (II) intel(0): Output VGA disconnected
> (WW) intel(0): No outputs definitely connected, trying again...
> (II) intel(0): Output VGA disconnected
> (WW) intel(0): Unable to find initial modes
> (EE) intel(0): No valid modes.
> (==) intel(0): Write-combining range (0xa0000,0x10000) was already
> clear
> (II) UnloadModule: "intel"
> (II) UnloadModule: "vgahw"
> (II) Unloading /usr/local/lib/xorg/modules/libvgahw.so
> (EE) Screen(s) found, but none have a usable configuration.
> 
> Fatal server error:
> no screens found

Can you send me your Xorg.conf?

robert.

> HTH
> -- 
> Regards,
> Torfinn Ingolfsen
-- 
Robert Noland <rnoland at FreeBSD.org>
FreeBSD