porting: Linux to Freebsd
Robert Huff
roberthuff at rcn.com
Mon Jun 8 12:07:21 UTC 2009
Peter Jeremy writes:
> You would probably be better off asking specific questions on
> problems that you run into.
Here's the situation:
About 6 years ago, a gaming software company(1) declared one of
their products(2) dead; after careful negotiation with ceratin
devoted fans, the source code (for Windows) was made available. It
has been improved, and ported to Linux where it is (apparently)
fully functional.
I would like to extend this to FreeBSD, both on principle and
because I like the game too.
I know this much > < about porting more than the most trivial
software, including using any of the standard configuration tools;
on the other hand, I'm pretty good at following instructions.
First problem:
When following the instructions here
"http://ctp2.darkdust.net/anonsvn/branches/linux/doc/README.linux" I
get to step 2 ("configure") and get this:
appending configuration tag "F77" to libtool
checking for flex... flex
checking lex output file root... lex.yy
checking lex library... none needed
checking whether yytext is a pointer... no
checking for byacc... /usr/bin/byacc
test: x/usr/bin/byacc: unexpected operator
checking for unzip... /usr/local/bin/unzip
test: x/usr/local/bin/unzip: unexpected operator
checking for sdl-config... /usr/local/bin/sdl-config
checking for SDL - version >= 0.11.0... yes
checking SDL/SDL_ffmpeg.h usability... no
checking SDL/SDL_ffmpeg.h presence... no
checking for SDL/SDL_ffmpeg.h... no
checking for X... libraries /usr/local/lib, headers /usr/local/include
checking whether -R must be followed by a space... no
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking whether byte ordering is bigendian... no
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking for htlatex... no
checking for makeindex... /usr/local/bin/makeindex
checking for pdflatex... /usr/local/bin/pdflatex
checking for perl... /usr/local/bin/perl
checking for thumbpdf... /usr/local/bin/thumbpdf
checking for acroread... /usr/local/bin/acroread
./configure: ${CFLAGS/...}: Bad substitution
The config.log is appended.
Robert Huff
1 - Activision
2 - Call to Power II
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by ctp2 configure 1.2, which was
generated by GNU Autoconf 2.62. Invocation command line was
$ ./configure --prefix=/home/huff/CTP2 --bindir=/home/foo/CTP2/ctp2_program/ctp
## --------- ##
## Platform. ##
## --------- ##
hostname = jerusalem.litteratus.org
uname -m = i386
uname -r = 8.0-CURRENT
uname -s = FreeBSD
uname -v = FreeBSD 8.0-CURRENT #0: Tue Apr 21 11:03:07 EDT 2009 huff at jerusalem.litteratus.org:/usr/obj/usr/src/sys/JERUSALEM
/usr/bin/uname -p = i386
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/bin
PATH: /sbin
PATH: /usr/sbin
PATH: /bin
PATH: /usr/bin
PATH: /usr/local/sbin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2138: checking build system type
configure:2156: result: i386-unknown-freebsd8.0
configure:2178: checking host system type
configure:2193: result: i386-unknown-freebsd8.0
configure:2215: checking target system type
configure:2230: result: i386-unknown-freebsd8.0
configure:2275: checking for a BSD-compatible install
configure:2343: result: /usr/local/bin/ginstall -c
configure:2354: checking whether build environment is sane
configure:2397: result: yes
configure:2422: checking for a thread-safe mkdir -p
configure:2461: result: /usr/local/bin/gmkdir -p
configure:2474: checking for gawk
configure:2490: found /usr/local/bin/gawk
configure:2501: result: gawk
configure:2512: checking whether make sets $(MAKE)
configure:2534: result: yes
configure:2724: checking whether to enable maintainer-specific portions of Makefiles
configure:2733: result: no
configure:2746: checking whether make sets $(MAKE)
configure:2768: result: yes
configure:2832: checking for cl
configure:2862: result: no
configure:2832: checking for gcc
configure:2848: found /usr/bin/gcc
configure:2859: result: gcc
configure:2895: checking for C compiler version
configure:2903: gcc --version >&5
gcc (GCC) 4.2.1 20070719 [FreeBSD]
Copyright (C) 2007 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2907: $? = 0
configure:2914: gcc -v >&5
Using built-in specs.
Target: i386-undermydesk-freebsd
Configured with: FreeBSD/i386 system compiler
Thread model: posix
gcc version 4.2.1 20070719 [FreeBSD]
configure:2918: $? = 0
configure:2925: gcc -V >&5
gcc: '-V' option must have argument
configure:2929: $? = 1
configure:2952: checking for C compiler default output file name
configure:2974: gcc conftest.c >&5
configure:2978: $? = 0
configure:3016: result: a.out
configure:3033: checking whether the C compiler works
configure:3043: ./a.out
configure:3047: $? = 0
configure:3064: result: yes
configure:3071: checking whether we are cross compiling
configure:3073: result: no
configure:3076: checking for suffix of executables
configure:3083: gcc -o conftest conftest.c >&5
configure:3087: $? = 0
configure:3111: result:
configure:3117: checking for suffix of object files
configure:3143: gcc -c conftest.c >&5
configure:3147: $? = 0
configure:3170: result: o
configure:3174: checking whether we are using the GNU C compiler
configure:3203: gcc -c conftest.c >&5
configure:3210: $? = 0
configure:3227: result: yes
configure:3236: checking whether gcc accepts -g
configure:3266: gcc -c -g conftest.c >&5
configure:3273: $? = 0
configure:3374: result: yes
configure:3391: checking for gcc option to accept ISO C89
configure:3465: gcc -c -g -O2 conftest.c >&5
configure:3472: $? = 0
configure:3495: result: none needed
configure:3524: checking for style of include used by make
configure:3552: result: GNU
configure:3577: checking dependency style of gcc
configure:3668: result: gcc3
configure:3741: checking for cl
configure:3771: result: no
configure:3741: checking for g++
configure:3757: found /usr/bin/g++
configure:3768: result: g++
configure:3799: checking for C++ compiler version
configure:3807: g++ --version >&5
g++ (GCC) 4.2.1 20070719 [FreeBSD]
Copyright (C) 2007 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3811: $? = 0
configure:3818: g++ -v >&5
Using built-in specs.
Target: i386-undermydesk-freebsd
Configured with: FreeBSD/i386 system compiler
Thread model: posix
gcc version 4.2.1 20070719 [FreeBSD]
configure:3822: $? = 0
configure:3829: g++ -V >&5
g++: '-V' option must have argument
configure:3833: $? = 1
configure:3836: checking whether we are using the GNU C++ compiler
configure:3865: g++ -c conftest.cpp >&5
configure:3872: $? = 0
configure:3889: result: yes
configure:3898: checking whether g++ accepts -g
configure:3928: g++ -c -g conftest.cpp >&5
configure:3935: $? = 0
configure:4036: result: yes
configure:4061: checking dependency style of g++
configure:4152: result: gcc3
configure:4239: checking for a sed that does not truncate output
configure:4295: result: /usr/bin/sed
configure:4298: checking for grep that handles long lines and -e
configure:4358: result: /usr/bin/grep
configure:4363: checking for egrep
configure:4427: result: /usr/bin/grep -E
configure:4443: checking for ld used by gcc
configure:4510: result: /usr/bin/ld
configure:4519: checking if the linker (/usr/bin/ld) is GNU ld
configure:4534: result: yes
configure:4539: checking for /usr/bin/ld option to reload object files
configure:4546: result: -r
configure:4564: checking for BSD-compatible nm
configure:4613: result: /usr/bin/nm -B
configure:4617: checking whether ln -s works
configure:4621: result: yes
configure:4628: checking how to recognize dependent libraries
configure:4814: result: pass_all
configure:5063: checking how to run the C preprocessor
configure:5103: gcc -E conftest.c
configure:5110: $? = 0
configure:5141: gcc -E conftest.c
conftest.c:10:28: error: ac_nonexistent.h: No such file or directory
configure:5148: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "ctp2"
| #define PACKAGE_TARNAME "ctp2"
| #define PACKAGE_VERSION "1.2"
| #define PACKAGE_STRING "ctp2 1.2"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "ctp2"
| #define VERSION "1.2"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:5181: result: gcc -E
configure:5210: gcc -E conftest.c
configure:5217: $? = 0
configure:5248: gcc -E conftest.c
conftest.c:10:28: error: ac_nonexistent.h: No such file or directory
configure:5255: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "ctp2"
| #define PACKAGE_TARNAME "ctp2"
| #define PACKAGE_VERSION "1.2"
| #define PACKAGE_STRING "ctp2 1.2"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "ctp2"
| #define VERSION "1.2"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:5293: checking for ANSI C header files
configure:5323: gcc -c -g -O2 conftest.c >&5
configure:5330: $? = 0
configure:5429: gcc -o conftest -g -O2 conftest.c >&5
configure:5433: $? = 0
configure:5439: ./conftest
configure:5443: $? = 0
configure:5461: result: yes
configure:5485: checking for sys/types.h
configure:5506: gcc -c -g -O2 conftest.c >&5
configure:5513: $? = 0
configure:5530: result: yes
configure:5485: checking for sys/stat.h
configure:5506: gcc -c -g -O2 conftest.c >&5
configure:5513: $? = 0
configure:5530: result: yes
configure:5485: checking for stdlib.h
configure:5506: gcc -c -g -O2 conftest.c >&5
configure:5513: $? = 0
configure:5530: result: yes
configure:5485: checking for string.h
configure:5506: gcc -c -g -O2 conftest.c >&5
configure:5513: $? = 0
configure:5530: result: yes
configure:5485: checking for memory.h
configure:5506: gcc -c -g -O2 conftest.c >&5
configure:5513: $? = 0
configure:5530: result: yes
configure:5485: checking for strings.h
configure:5506: gcc -c -g -O2 conftest.c >&5
configure:5513: $? = 0
configure:5530: result: yes
configure:5485: checking for inttypes.h
configure:5506: gcc -c -g -O2 conftest.c >&5
configure:5513: $? = 0
configure:5530: result: yes
configure:5485: checking for stdint.h
configure:5506: gcc -c -g -O2 conftest.c >&5
configure:5513: $? = 0
configure:5530: result: yes
configure:5485: checking for unistd.h
configure:5506: gcc -c -g -O2 conftest.c >&5
configure:5513: $? = 0
configure:5530: result: yes
configure:5559: checking dlfcn.h usability
configure:5576: gcc -c -g -O2 conftest.c >&5
configure:5583: $? = 0
configure:5597: result: yes
configure:5601: checking dlfcn.h presence
configure:5616: gcc -E conftest.c
configure:5623: $? = 0
configure:5637: result: yes
configure:5665: checking for dlfcn.h
configure:5674: result: yes
configure:5698: checking how to run the C++ preprocessor
configure:5734: g++ -E conftest.cpp
configure:5741: $? = 0
configure:5772: g++ -E conftest.cpp
conftest.cpp:21:28: error: ac_nonexistent.h: No such file or directory
configure:5779: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "ctp2"
| #define PACKAGE_TARNAME "ctp2"
| #define PACKAGE_VERSION "1.2"
| #define PACKAGE_STRING "ctp2 1.2"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "ctp2"
| #define VERSION "1.2"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:5812: result: g++ -E
configure:5841: g++ -E conftest.cpp
configure:5848: $? = 0
configure:5879: g++ -E conftest.cpp
conftest.cpp:21:28: error: ac_nonexistent.h: No such file or directory
configure:5886: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "ctp2"
| #define PACKAGE_TARNAME "ctp2"
| #define PACKAGE_VERSION "1.2"
| #define PACKAGE_STRING "ctp2 1.2"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "ctp2"
| #define VERSION "1.2"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:5979: checking for g77
configure:6009: result: no
configure:5979: checking for xlf
configure:6009: result: no
configure:5979: checking for f77
configure:6009: result: no
configure:5979: checking for frt
configure:6009: result: no
configure:5979: checking for pgf77
configure:6009: result: no
configure:5979: checking for cf77
configure:6009: result: no
configure:5979: checking for fort77
configure:6009: result: no
configure:5979: checking for fl32
configure:6009: result: no
configure:5979: checking for af77
configure:6009: result: no
configure:5979: checking for xlf90
configure:6009: result: no
configure:5979: checking for f90
configure:6009: result: no
configure:5979: checking for pgf90
configure:6009: result: no
configure:5979: checking for pghpf
configure:6009: result: no
configure:5979: checking for epcf90
configure:6009: result: no
configure:5979: checking for gfortran
configure:6009: result: no
configure:5979: checking for g95
configure:6009: result: no
configure:5979: checking for xlf95
configure:6009: result: no
configure:5979: checking for f95
configure:6009: result: no
configure:5979: checking for fort
configure:6009: result: no
configure:5979: checking for ifort
configure:6009: result: no
configure:5979: checking for ifc
configure:6009: result: no
configure:5979: checking for efc
configure:6009: result: no
configure:5979: checking for pgf95
configure:6009: result: no
configure:5979: checking for lf95
configure:6009: result: no
configure:5979: checking for ftn
configure:6009: result: no
configure:6036: checking for Fortran 77 compiler version
configure:6044: --version >&5
--version: not found
configure:6048: $? = 127
configure:6055: -v >&5
-v: not found
configure:6059: $? = 127
configure:6066: -V >&5
-V: not found
configure:6070: $? = 127
configure:6078: checking whether we are using the GNU Fortran 77 compiler
configure:6097: -c conftest.F >&5
-c: not found
configure:6104: $? = 127
configure: failed program was:
| program main
| #ifndef __GNUC__
| choke me
| #endif
|
| end
configure:6121: result: no
configure:6127: checking whether accepts -g
configure:6144: -c -g conftest.f >&5
-c: not found
configure:6151: $? = 127
configure: failed program was:
| program main
|
| end
configure:6167: result: no
configure:6200: checking the maximum length of command line arguments
configure:6312: result: 196608
configure:6324: checking command to parse /usr/bin/nm -B output from gcc object
configure:6429: gcc -c -g -O2 conftest.c >&5
configure:6432: $? = 0
configure:6436: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' \> conftest.nm
configure:6439: $? = 0
configure:6491: gcc -o conftest -g -O2 conftest.c conftstm.o >&5
configure:6494: $? = 0
configure:6532: result: ok
configure:6536: checking for objdir
configure:6551: result: .libs
configure:6643: checking for ar
configure:6659: found /usr/bin/ar
configure:6670: result: ar
configure:6739: checking for ranlib
configure:6755: found /usr/bin/ranlib
configure:6766: result: ranlib
configure:6835: checking for strip
configure:6851: found /usr/bin/strip
configure:6862: result: strip
configure:7464: checking if gcc supports -fno-rtti -fno-exceptions
configure:7482: gcc -c -g -O2 -fno-rtti -fno-exceptions conftest.c >&5
cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not for C
configure:7486: $? = 0
configure:7499: result: no
configure:7514: checking for gcc option to produce PIC
configure:7746: result: -fPIC
configure:7754: checking if gcc PIC flag -fPIC works
configure:7772: gcc -c -g -O2 -fPIC -DPIC conftest.c >&5
configure:7776: $? = 0
configure:7789: result: yes
configure:7817: checking if gcc static flag -static works
configure:7845: result: yes
configure:7855: checking if gcc supports -c -o file.o
configure:7876: gcc -c -g -O2 -o out/conftest2.o conftest.c >&5
configure:7880: $? = 0
configure:7902: result: yes
configure:7928: checking whether the gcc linker (/usr/bin/ld) supports shared libraries
configure:8916: result: yes
configure:8937: checking whether -lc should be explicitly linked in
configure:8942: gcc -c -g -O2 conftest.c >&5
configure:8945: $? = 0
configure:8960: gcc -shared conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| grep -lc \>/dev/null 2\>\&1
configure:8963: $? = 0
configure:8975: result: no
configure:8983: checking dynamic linker characteristics
configure:9585: result: freebsd8.0 ld.so
configure:9609: checking how to hardcode library paths into programs
configure:9634: result: immediate
configure:9648: checking whether stripping libraries is possible
configure:9653: result: yes
configure:10483: checking if libtool supports shared libraries
configure:10485: result: yes
configure:10488: checking whether to build shared libraries
configure:10509: result: yes
configure:10512: checking whether to build static libraries
configure:10516: result: yes
configure:10610: creating libtool
configure:11203: checking for ld used by g++
configure:11270: result: /usr/bin/ld
configure:11279: checking if the linker (/usr/bin/ld) is GNU ld
configure:11294: result: yes
configure:11345: checking whether the g++ linker (/usr/bin/ld) supports shared libraries
configure:12299: result: yes
configure:12316: g++ -c -g -O2 conftest.cpp >&5
configure:12319: $? = 0
configure:12475: checking for g++ option to produce PIC
configure:12759: result: -fPIC
configure:12767: checking if g++ PIC flag -fPIC works
configure:12785: g++ -c -g -O2 -fPIC -DPIC conftest.cpp >&5
configure:12789: $? = 0
configure:12802: result: yes
configure:12830: checking if g++ static flag -static works
configure:12858: result: yes
configure:12868: checking if g++ supports -c -o file.o
configure:12889: g++ -c -g -O2 -o out/conftest2.o conftest.cpp >&5
configure:12893: $? = 0
configure:12915: result: yes
configure:12941: checking whether the g++ linker (/usr/bin/ld) supports shared libraries
configure:12967: result: yes
configure:13034: checking dynamic linker characteristics
configure:13584: result: freebsd8.0 ld.so
configure:13608: checking how to hardcode library paths into programs
configure:13633: result: immediate
configure:19880: checking for flex
configure:19896: found /usr/local/bin/flex
configure:19907: result: flex
configure:19944: flex conftest.l
configure:19948: $? = 0
configure:19950: checking lex output file root
configure:19966: result: lex.yy
configure:19971: checking lex library
configure:19990: g++ -o conftest -g -O2 conftest.cpp >&5
conftest.l: In function 'int yylex()':
conftest.l:6: error: 'input' was not declared in this scope
configure:19997: $? = 1
configure: failed program was:
|
| #line 3 "lex.yy.c"
|
| #define YY_INT_ALIGNED short int
|
| /* A lexical scanner generated by flex */
|
| #define FLEX_SCANNER
| #define YY_FLEX_MAJOR_VERSION 2
| #define YY_FLEX_MINOR_VERSION 5
| #define YY_FLEX_SUBMINOR_VERSION 35
| #if YY_FLEX_SUBMINOR_VERSION > 0
| #define FLEX_BETA
| #endif
|
| /* First, we deal with platform-specific or compiler-specific issues. */
|
| /* begin standard C headers. */
| #include <stdio.h>
| #include <string.h>
| #include <errno.h>
| #include <stdlib.h>
|
| /* end standard C headers. */
|
| /* flex integer type definitions */
|
| #ifndef FLEXINT_H
| #define FLEXINT_H
|
| /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
|
| #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
|
| /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
| * if you want the limit (max/min) macros for int types.
| */
| #ifndef __STDC_LIMIT_MACROS
| #define __STDC_LIMIT_MACROS 1
| #endif
|
| #include <inttypes.h>
| typedef int8_t flex_int8_t;
| typedef uint8_t flex_uint8_t;
| typedef int16_t flex_int16_t;
| typedef uint16_t flex_uint16_t;
| typedef int32_t flex_int32_t;
| typedef uint32_t flex_uint32_t;
| #else
| typedef signed char flex_int8_t;
| typedef short int flex_int16_t;
| typedef int flex_int32_t;
| typedef unsigned char flex_uint8_t;
| typedef unsigned short int flex_uint16_t;
| typedef unsigned int flex_uint32_t;
| #endif /* ! C99 */
|
| /* Limits of integral types. */
| #ifndef INT8_MIN
| #define INT8_MIN (-128)
| #endif
| #ifndef INT16_MIN
| #define INT16_MIN (-32767-1)
| #endif
| #ifndef INT32_MIN
| #define INT32_MIN (-2147483647-1)
| #endif
| #ifndef INT8_MAX
| #define INT8_MAX (127)
| #endif
| #ifndef INT16_MAX
| #define INT16_MAX (32767)
| #endif
| #ifndef INT32_MAX
| #define INT32_MAX (2147483647)
| #endif
| #ifndef UINT8_MAX
| #define UINT8_MAX (255U)
| #endif
| #ifndef UINT16_MAX
| #define UINT16_MAX (65535U)
| #endif
| #ifndef UINT32_MAX
| #define UINT32_MAX (4294967295U)
| #endif
|
| #endif /* ! FLEXINT_H */
|
| #ifdef __cplusplus
|
| /* The "const" storage-class-modifier is valid. */
| #define YY_USE_CONST
|
| #else /* ! __cplusplus */
|
| /* C99 requires __STDC__ to be defined as 1. */
| #if defined (__STDC__)
|
| #define YY_USE_CONST
|
| #endif /* defined (__STDC__) */
| #endif /* ! __cplusplus */
|
| #ifdef YY_USE_CONST
| #define yyconst const
| #else
| #define yyconst
| #endif
|
| /* Returned upon end-of-file. */
| #define YY_NULL 0
|
| /* Promotes a possibly negative, possibly signed char to an unsigned
| * integer for use as an array index. If the signed char is negative,
| * we want to instead treat it as an 8-bit unsigned char, hence the
| * double cast.
| */
| #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
|
| /* Enter a start condition. This macro really ought to take a parameter,
| * but we do it the disgusting crufty way forced on us by the ()-less
| * definition of BEGIN.
| */
| #define BEGIN (yy_start) = 1 + 2 *
|
| /* Translate the current start state into a value that can be later handed
| * to BEGIN to return to the state. The YYSTATE alias is for lex
| * compatibility.
| */
| #define YY_START (((yy_start) - 1) / 2)
| #define YYSTATE YY_START
|
| /* Action number for EOF rule of a given start state. */
| #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
|
| /* Special action meaning "start processing a new file". */
| #define YY_NEW_FILE yyrestart(yyin )
|
| #define YY_END_OF_BUFFER_CHAR 0
|
| /* Size of default input buffer. */
| #ifndef YY_BUF_SIZE
| #define YY_BUF_SIZE 16384
| #endif
|
| /* The state buf must be large enough to hold one state per character in the main buffer.
| */
| #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
|
| #ifndef YY_TYPEDEF_YY_BUFFER_STATE
| #define YY_TYPEDEF_YY_BUFFER_STATE
| typedef struct yy_buffer_state *YY_BUFFER_STATE;
| #endif
|
| extern int yyleng;
|
| extern FILE *yyin, *yyout;
|
| #define EOB_ACT_CONTINUE_SCAN 0
| #define EOB_ACT_END_OF_FILE 1
| #define EOB_ACT_LAST_MATCH 2
|
| #define YY_LESS_LINENO(n)
|
| /* Return all but the first "n" matched characters back to the input stream. */
| #define yyless(n) \
| do \
| { \
| /* Undo effects of setting up yytext. */ \
| int yyless_macro_arg = (n); \
| YY_LESS_LINENO(yyless_macro_arg);\
| *yy_cp = (yy_hold_char); \
| YY_RESTORE_YY_MORE_OFFSET \
| (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
| YY_DO_BEFORE_ACTION; /* set up yytext again */ \
| } \
| while ( 0 )
|
| #define unput(c) yyunput( c, (yytext_ptr) )
|
| #ifndef YY_TYPEDEF_YY_SIZE_T
| #define YY_TYPEDEF_YY_SIZE_T
| typedef size_t yy_size_t;
| #endif
|
| #ifndef YY_STRUCT_YY_BUFFER_STATE
| #define YY_STRUCT_YY_BUFFER_STATE
| struct yy_buffer_state
| {
| FILE *yy_input_file;
|
| char *yy_ch_buf; /* input buffer */
| char *yy_buf_pos; /* current position in input buffer */
|
| /* Size of input buffer in bytes, not including room for EOB
| * characters.
| */
| yy_size_t yy_buf_size;
|
| /* Number of characters read into yy_ch_buf, not including EOB
| * characters.
| */
| int yy_n_chars;
|
| /* Whether we "own" the buffer - i.e., we know we created it,
| * and can realloc() it to grow it, and should free() it to
| * delete it.
| */
| int yy_is_our_buffer;
|
| /* Whether this is an "interactive" input source; if so, and
| * if we're using stdio for input, then we want to use getc()
| * instead of fread(), to make sure we stop fetching input after
| * each newline.
| */
| int yy_is_interactive;
|
| /* Whether we're considered to be at the beginning of a line.
| * If so, '^' rules will be active on the next match, otherwise
| * not.
| */
| int yy_at_bol;
|
| int yy_bs_lineno; /**< The line count. */
| int yy_bs_column; /**< The column count. */
|
| /* Whether to try to fill the input buffer when we reach the
| * end of it.
| */
| int yy_fill_buffer;
|
| int yy_buffer_status;
|
| #define YY_BUFFER_NEW 0
| #define YY_BUFFER_NORMAL 1
| /* When an EOF's been seen but there's still some text to process
| * then we mark the buffer as YY_EOF_PENDING, to indicate that we
| * shouldn't try reading from the input source any more. We might
| * still have a bunch of tokens to match, though, because of
| * possible backing-up.
| *
| * When we actually see the EOF, we change the status to "new"
| * (via yyrestart()), so that the user can continue scanning by
| * just pointing yyin at a new input file.
| */
| #define YY_BUFFER_EOF_PENDING 2
|
| };
| #endif /* !YY_STRUCT_YY_BUFFER_STATE */
|
| /* Stack of input buffers. */
| static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
| static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
| static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
|
| /* We provide macros for accessing buffer states in case in the
| * future we want to put the buffer states in a more general
| * "scanner state".
| *
| * Returns the top of the stack, or NULL.
| */
| #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
| ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
| : NULL)
|
| /* Same as previous macro, but useful when we know that the buffer stack is not
| * NULL or when we need an lvalue. For internal use only.
| */
| #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
|
| /* yy_hold_char holds the character lost when yytext is formed. */
| static char yy_hold_char;
| static int yy_n_chars; /* number of characters read into yy_ch_buf */
| int yyleng;
|
| /* Points to current character in buffer. */
| static char *yy_c_buf_p = (char *) 0;
| static int yy_init = 0; /* whether we need to initialize */
| static int yy_start = 0; /* start state number */
|
| /* Flag which is used to allow yywrap()'s to do buffer switches
| * instead of setting up a fresh yyin. A bit of a hack ...
| */
| static int yy_did_buffer_switch_on_eof;
|
| void yyrestart (FILE *input_file );
| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer );
| YY_BUFFER_STATE yy_create_buffer (FILE *file,int size );
| void yy_delete_buffer (YY_BUFFER_STATE b );
| void yy_flush_buffer (YY_BUFFER_STATE b );
| void yypush_buffer_state (YY_BUFFER_STATE new_buffer );
| void yypop_buffer_state (void );
|
| static void yyensure_buffer_stack (void );
| static void yy_load_buffer_state (void );
| static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file );
|
| #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
|
| YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size );
| YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str );
| YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len );
|
| void *yyalloc (yy_size_t );
| void *yyrealloc (void *,yy_size_t );
| void yyfree (void * );
|
| #define yy_new_buffer yy_create_buffer
|
| #define yy_set_interactive(is_interactive) \
| { \
| if ( ! YY_CURRENT_BUFFER ){ \
| yyensure_buffer_stack (); \
| YY_CURRENT_BUFFER_LVALUE = \
| yy_create_buffer(yyin,YY_BUF_SIZE ); \
| } \
| YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
| }
|
| #define yy_set_bol(at_bol) \
| { \
| if ( ! YY_CURRENT_BUFFER ){\
| yyensure_buffer_stack (); \
| YY_CURRENT_BUFFER_LVALUE = \
| yy_create_buffer(yyin,YY_BUF_SIZE ); \
| } \
| YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
| }
|
| #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
|
| /* Begin user sect3 */
|
| typedef unsigned char YY_CHAR;
|
| FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
|
| typedef int yy_state_type;
|
| extern int yylineno;
|
| int yylineno = 1;
|
| extern char *yytext;
| #define yytext_ptr yytext
|
| static yy_state_type yy_get_previous_state (void );
| static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
| static int yy_get_next_buffer (void );
| static void yy_fatal_error (yyconst char msg[] );
|
| /* Done after the current pattern has been matched and before the
| * corresponding action - sets up yytext.
| */
| #define YY_DO_BEFORE_ACTION \
| (yytext_ptr) = yy_bp; \
| (yytext_ptr) -= (yy_more_len); \
| yyleng = (size_t) (yy_cp - (yytext_ptr)); \
| (yy_hold_char) = *yy_cp; \
| *yy_cp = '\0'; \
| (yy_c_buf_p) = yy_cp;
|
| #define YY_NUM_RULES 8
| #define YY_END_OF_BUFFER 9
| /* This struct is not used in this scanner,
| but its presence is necessary. */
| struct yy_trans_info
| {
| flex_int32_t yy_verify;
| flex_int32_t yy_nxt;
| };
| static yyconst flex_int16_t yy_acclist[23] =
| { 0,
| 9, 7, 8, 8, 1, 7, 8, 2, 7, 8,
| 3, 7, 8, 4, 7, 8, 5, 7, 8, 6,
| 7, 8
| } ;
|
| static yyconst flex_int16_t yy_accept[14] =
| { 0,
| 1, 1, 1, 2, 4, 5, 8, 11, 14, 17,
| 20, 23, 23
| } ;
|
| static yyconst flex_int32_t yy_ec[256] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 2,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 3, 4, 5, 6,
|
| 7, 8, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
|
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1
| } ;
|
| static yyconst flex_int32_t yy_meta[9] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1
| } ;
|
| static yyconst flex_int16_t yy_base[13] =
| { 0,
| 0, 0, 9, 10, 10, 10, 10, 10, 10, 10,
| 10, 10
| } ;
|
| static yyconst flex_int16_t yy_def[13] =
| { 0,
| 12, 1, 12, 12, 12, 12, 12, 12, 12, 12,
| 12, 0
| } ;
|
| static yyconst flex_int16_t yy_nxt[19] =
| { 0,
| 4, 5, 6, 7, 8, 9, 10, 11, 12, 3,
| 12, 12, 12, 12, 12, 12, 12, 12
| } ;
|
| static yyconst flex_int16_t yy_chk[19] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1, 3, 12,
| 12, 12, 12, 12, 12, 12, 12, 12
| } ;
|
| extern int yy_flex_debug;
| int yy_flex_debug = 0;
|
| static yy_state_type *yy_state_buf=0, *yy_state_ptr=0;
| static char *yy_full_match;
| static int yy_lp;
| #define REJECT \
| { \
| *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \
| yy_cp = (yy_full_match); /* restore poss. backed-over text */ \
| ++(yy_lp); \
| goto find_rule; \
| }
|
| static int yy_more_flag = 0;
| static int yy_more_len = 0;
| #define yymore() ((yy_more_flag) = 1)
| #define YY_MORE_ADJ (yy_more_len)
| #define YY_RESTORE_YY_MORE_OFFSET
| char *yytext;
| #line 1 "conftest.l"
| #line 468 "lex.yy.c"
|
| #define INITIAL 0
|
| #ifndef YY_NO_UNISTD_H
| /* Special case for "unistd.h", since it is non-ANSI. We include it way
| * down here because we want the user's section 1 to have been scanned first.
| * The user has a chance to override it with an option.
| */
| #include <unistd.h>
| #endif
|
| #ifndef YY_EXTRA_TYPE
| #define YY_EXTRA_TYPE void *
| #endif
|
| static int yy_init_globals (void );
|
| /* Accessor methods to globals.
| These are made visible to non-reentrant scanners for convenience. */
|
| int yylex_destroy (void );
|
| int yyget_debug (void );
|
| void yyset_debug (int debug_flag );
|
| YY_EXTRA_TYPE yyget_extra (void );
|
| void yyset_extra (YY_EXTRA_TYPE user_defined );
|
| FILE *yyget_in (void );
|
| void yyset_in (FILE * in_str );
|
| FILE *yyget_out (void );
|
| void yyset_out (FILE * out_str );
|
| int yyget_leng (void );
|
| char *yyget_text (void );
|
| int yyget_lineno (void );
|
| void yyset_lineno (int line_number );
|
| /* Macros after this point can all be overridden by user definitions in
| * section 1.
| */
|
| #ifndef YY_SKIP_YYWRAP
| #ifdef __cplusplus
| extern "C" int yywrap (void );
| #else
| extern int yywrap (void );
| #endif
| #endif
|
| static void yyunput (int c,char *buf_ptr );
|
| #ifndef yytext_ptr
| static void yy_flex_strncpy (char *,yyconst char *,int );
| #endif
|
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen (yyconst char * );
| #endif
|
| #ifndef YY_NO_INPUT
|
| #ifdef __cplusplus
| static int yyinput (void );
| #else
| static int input (void );
| #endif
|
| #endif
|
| /* Amount of stuff to slurp up with each read. */
| #ifndef YY_READ_BUF_SIZE
| #define YY_READ_BUF_SIZE 8192
| #endif
|
| /* Copy whatever the last rule matched to the standard output. */
| #ifndef ECHO
| /* This used to be an fputs(), but since the string might contain NUL's,
| * we now use fwrite().
| */
| #define ECHO fwrite( yytext, yyleng, 1, yyout )
| #endif
|
| /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
| * is returned in "result".
| */
| #ifndef YY_INPUT
| #define YY_INPUT(buf,result,max_size) \
| if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
| { \
| int c = '*'; \
| int n; \
| for ( n = 0; n < max_size && \
| (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
| buf[n] = (char) c; \
| if ( c == '\n' ) \
| buf[n++] = (char) c; \
| if ( c == EOF && ferror( yyin ) ) \
| YY_FATAL_ERROR( "input in flex scanner failed" ); \
| result = n; \
| } \
| else \
| { \
| errno=0; \
| while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
| { \
| if( errno != EINTR) \
| { \
| YY_FATAL_ERROR( "input in flex scanner failed" ); \
| break; \
| } \
| errno=0; \
| clearerr(yyin); \
| } \
| }\
| \
|
| #endif
|
| /* No semi-colon after return; correct usage is to write "yyterminate();" -
| * we don't want an extra ';' after the "return" because that will cause
| * some compilers to complain about unreachable statements.
| */
| #ifndef yyterminate
| #define yyterminate() return YY_NULL
| #endif
|
| /* Number of entries by which start-condition stack grows. */
| #ifndef YY_START_STACK_INCR
| #define YY_START_STACK_INCR 25
| #endif
|
| /* Report a fatal error. */
| #ifndef YY_FATAL_ERROR
| #define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
| #endif
|
| /* end tables serialization structures and prototypes */
|
| /* Default declaration of generated scanner - a define so the user can
| * easily add parameters.
| */
| #ifndef YY_DECL
| #define YY_DECL_IS_OURS 1
|
| extern int yylex (void);
|
| #define YY_DECL int yylex (void)
| #endif /* !YY_DECL */
|
| /* Code executed at the beginning of each rule, after yytext and yyleng
| * have been set up.
| */
| #ifndef YY_USER_ACTION
| #define YY_USER_ACTION
| #endif
|
| /* Code executed at the end of each rule. */
| #ifndef YY_BREAK
| #define YY_BREAK break;
| #endif
|
| #define YY_RULE_SETUP \
| YY_USER_ACTION
|
| /** The main scanner function which does all the work.
| */
| YY_DECL
| {
| register yy_state_type yy_current_state;
| register char *yy_cp, *yy_bp;
| register int yy_act;
|
| #line 1 "conftest.l"
|
| #line 652 "lex.yy.c"
|
| if ( !(yy_init) )
| {
| (yy_init) = 1;
|
| #ifdef YY_USER_INIT
| YY_USER_INIT;
| #endif
|
| /* Create the reject buffer large enough to save one state per allowed character. */
| if ( ! (yy_state_buf) )
| (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE );
| if ( ! (yy_state_buf) )
| YY_FATAL_ERROR( "out of dynamic memory in yylex()" );
|
| if ( ! (yy_start) )
| (yy_start) = 1; /* first start state */
|
| if ( ! yyin )
| yyin = stdin;
|
| if ( ! yyout )
| yyout = stdout;
|
| if ( ! YY_CURRENT_BUFFER ) {
| yyensure_buffer_stack ();
| YY_CURRENT_BUFFER_LVALUE =
| yy_create_buffer(yyin,YY_BUF_SIZE );
| }
|
| yy_load_buffer_state( );
| }
|
| while ( 1 ) /* loops until end-of-file is reached */
| {
| (yy_more_len) = 0;
| if ( (yy_more_flag) )
| {
| (yy_more_len) = (yy_c_buf_p) - (yytext_ptr);
| (yy_more_flag) = 0;
| }
| yy_cp = (yy_c_buf_p);
|
| /* Support of yytext. */
| *yy_cp = (yy_hold_char);
|
| /* yy_bp points to the position in yy_ch_buf of the start of
| * the current run.
| */
| yy_bp = yy_cp;
|
| yy_current_state = (yy_start);
|
| (yy_state_ptr) = (yy_state_buf);
| *(yy_state_ptr)++ = yy_current_state;
|
| yy_match:
| do
| {
| register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| *(yy_state_ptr)++ = yy_current_state;
| ++yy_cp;
| }
| while ( yy_base[yy_current_state] != 10 );
|
| yy_find_action:
| yy_current_state = *--(yy_state_ptr);
| (yy_lp) = yy_accept[yy_current_state];
| find_rule: /* we branch to this label when backing up */
| for ( ; ; ) /* until we find what rule we matched */
| {
| if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] )
| {
| yy_act = yy_acclist[(yy_lp)];
| {
| (yy_full_match) = yy_cp;
| break;
| }
| }
| --yy_cp;
| yy_current_state = *--(yy_state_ptr);
| (yy_lp) = yy_accept[yy_current_state];
| }
|
| YY_DO_BEFORE_ACTION;
|
| do_action: /* This label is used only to access EOF actions. */
|
| switch ( yy_act )
| { /* beginning of action switch */
| case 1:
| YY_RULE_SETUP
| #line 2 "conftest.l"
| { ECHO; }
| YY_BREAK
| case 2:
| YY_RULE_SETUP
| #line 3 "conftest.l"
| { REJECT; }
| YY_BREAK
| case 3:
| YY_RULE_SETUP
| #line 4 "conftest.l"
| { yymore (); }
| YY_BREAK
| case 4:
| YY_RULE_SETUP
| #line 5 "conftest.l"
| { yyless (1); }
| YY_BREAK
| case 5:
| YY_RULE_SETUP
| #line 6 "conftest.l"
| { yyless (input () != 0); }
| YY_BREAK
| case 6:
| YY_RULE_SETUP
| #line 7 "conftest.l"
| { unput (yytext[0]); }
| YY_BREAK
| case 7:
| YY_RULE_SETUP
| #line 8 "conftest.l"
| { BEGIN INITIAL; }
| YY_BREAK
| case 8:
| YY_RULE_SETUP
| #line 9 "conftest.l"
| ECHO;
| YY_BREAK
| #line 790 "lex.yy.c"
| case YY_STATE_EOF(INITIAL):
| yyterminate();
|
| case YY_END_OF_BUFFER:
| {
| /* Amount of text matched not including the EOB char. */
| int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
|
| /* Undo the effects of YY_DO_BEFORE_ACTION. */
| *yy_cp = (yy_hold_char);
| YY_RESTORE_YY_MORE_OFFSET
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
| {
| /* We're scanning a new file or input source. It's
| * possible that this happened because the user
| * just pointed yyin at a new source and called
| * yylex(). If so, then we have to assure
| * consistency between YY_CURRENT_BUFFER and our
| * globals. Here is the right place to do so, because
| * this is the first action (other than possibly a
| * back-up) that will match for the new input source.
| */
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
| YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
| }
|
| /* Note that here we test for yy_c_buf_p "<=" to the position
| * of the first EOB in the buffer, since yy_c_buf_p will
| * already have been incremented past the NUL character
| * (since all states make transitions on EOB to the
| * end-of-buffer state). Contrast this with the test
| * in input().
| */
| if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
| { /* This was really a NUL. */
| yy_state_type yy_next_state;
|
| (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
|
| yy_current_state = yy_get_previous_state( );
|
| /* Okay, we're now positioned to make the NUL
| * transition. We couldn't have
| * yy_get_previous_state() go ahead and do it
| * for us because it doesn't know how to deal
| * with the possibility of jamming (and we don't
| * want to build jamming into it because then it
| * will run more slowly).
| */
|
| yy_next_state = yy_try_NUL_trans( yy_current_state );
|
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
|
| if ( yy_next_state )
| {
| /* Consume the NUL. */
| yy_cp = ++(yy_c_buf_p);
| yy_current_state = yy_next_state;
| goto yy_match;
| }
|
| else
| {
| yy_cp = (yy_c_buf_p);
| goto yy_find_action;
| }
| }
|
| else switch ( yy_get_next_buffer( ) )
| {
| case EOB_ACT_END_OF_FILE:
| {
| (yy_did_buffer_switch_on_eof) = 0;
|
| if ( yywrap( ) )
| {
| /* Note: because we've taken care in
| * yy_get_next_buffer() to have set up
| * yytext, we can now set up
| * yy_c_buf_p so that if some total
| * hoser (like flex itself) wants to
| * call the scanner after we return the
| * YY_NULL, it'll still work - another
| * YY_NULL will get returned.
| */
| (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
|
| yy_act = YY_STATE_EOF(YY_START);
| goto do_action;
| }
|
| else
| {
| if ( ! (yy_did_buffer_switch_on_eof) )
| YY_NEW_FILE;
| }
| break;
| }
|
| case EOB_ACT_CONTINUE_SCAN:
| (yy_c_buf_p) =
| (yytext_ptr) + yy_amount_of_matched_text;
|
| yy_current_state = yy_get_previous_state( );
|
| yy_cp = (yy_c_buf_p);
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| goto yy_match;
|
| case EOB_ACT_LAST_MATCH:
| (yy_c_buf_p) =
| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
|
| yy_current_state = yy_get_previous_state( );
|
| yy_cp = (yy_c_buf_p);
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| goto yy_find_action;
| }
| break;
| }
|
| default:
| YY_FATAL_ERROR(
| "fatal flex scanner internal error--no action found" );
| } /* end of action switch */
| } /* end of scanning one token */
| } /* end of yylex */
|
| /* yy_get_next_buffer - try to read in a new buffer
| *
| * Returns a code representing an action:
| * EOB_ACT_LAST_MATCH -
| * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
| * EOB_ACT_END_OF_FILE - end of file
| */
| static int yy_get_next_buffer (void)
| {
| register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
| register char *source = (yytext_ptr);
| register int number_to_move, i;
| int ret_val;
|
| if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
| YY_FATAL_ERROR(
| "fatal flex scanner internal error--end of buffer missed" );
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
| { /* Don't try to fill the buffer, so this is an EOF. */
| if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
| {
| /* We matched a single character, the EOB, so
| * treat this as a final EOF.
| */
| return EOB_ACT_END_OF_FILE;
| }
|
| else
| {
| /* We matched some text prior to the EOB, first
| * process it.
| */
| return EOB_ACT_LAST_MATCH;
| }
| }
|
| /* Try to read more data. */
|
| /* First move last chars to start of buffer. */
| number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
|
| for ( i = 0; i < number_to_move; ++i )
| *(dest++) = *(source++);
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
| /* don't do the read, it's not guaranteed to return an EOF,
| * just force an EOF
| */
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
|
| else
| {
| int num_to_read =
| YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
|
| while ( num_to_read <= 0 )
| { /* Not enough room in the buffer - grow it. */
|
| YY_FATAL_ERROR(
| "input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
|
| }
|
| if ( num_to_read > YY_READ_BUF_SIZE )
| num_to_read = YY_READ_BUF_SIZE;
|
| /* Read in more data. */
| YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
| (yy_n_chars), (size_t) num_to_read );
|
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| if ( (yy_n_chars) == 0 )
| {
| if ( number_to_move == YY_MORE_ADJ )
| {
| ret_val = EOB_ACT_END_OF_FILE;
| yyrestart(yyin );
| }
|
| else
| {
| ret_val = EOB_ACT_LAST_MATCH;
| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
| YY_BUFFER_EOF_PENDING;
| }
| }
|
| else
| ret_val = EOB_ACT_CONTINUE_SCAN;
|
| if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
| /* Extend the array by 50%, plus the number we really need. */
| yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
| if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
| }
|
| (yy_n_chars) += number_to_move;
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
|
| (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
|
| return ret_val;
| }
|
| /* yy_get_previous_state - get the state just before the EOB char was reached */
|
| static yy_state_type yy_get_previous_state (void)
| {
| register yy_state_type yy_current_state;
| register char *yy_cp;
|
| yy_current_state = (yy_start);
|
| (yy_state_ptr) = (yy_state_buf);
| *(yy_state_ptr)++ = yy_current_state;
|
| for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
| {
| register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| *(yy_state_ptr)++ = yy_current_state;
| }
|
| return yy_current_state;
| }
|
| /* yy_try_NUL_trans - try to make a transition on the NUL character
| *
| * synopsis
| * next_state = yy_try_NUL_trans( current_state );
| */
| static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
| {
| register int yy_is_jam;
|
| register YY_CHAR yy_c = 1;
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| yy_is_jam = (yy_current_state == 12);
| if ( ! yy_is_jam )
| *(yy_state_ptr)++ = yy_current_state;
|
| return yy_is_jam ? 0 : yy_current_state;
| }
|
| static void yyunput (int c, register char * yy_bp )
| {
| register char *yy_cp;
|
| yy_cp = (yy_c_buf_p);
|
| /* undo effects of setting up yytext */
| *yy_cp = (yy_hold_char);
|
| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
| { /* need to shift things up to make room */
| /* +2 for EOB chars. */
| register int number_to_move = (yy_n_chars) + 2;
| register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
| YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
| register char *source =
| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
|
| while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
| *--dest = *--source;
|
| yy_cp += (int) (dest - source);
| yy_bp += (int) (dest - source);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
|
| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
| YY_FATAL_ERROR( "flex scanner push-back overflow" );
| }
|
| *--yy_cp = (char) c;
|
| (yytext_ptr) = yy_bp;
| (yy_hold_char) = *yy_cp;
| (yy_c_buf_p) = yy_cp;
| }
|
| #ifndef YY_NO_INPUT
| #ifdef __cplusplus
| static int yyinput (void)
| #else
| static int input (void)
| #endif
|
| {
| int c;
|
| *(yy_c_buf_p) = (yy_hold_char);
|
| if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
| {
| /* yy_c_buf_p now points to the character we want to return.
| * If this occurs *before* the EOB characters, then it's a
| * valid NUL; if not, then we've hit the end of the buffer.
| */
| if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
| /* This was really a NUL. */
| *(yy_c_buf_p) = '\0';
|
| else
| { /* need more input */
| int offset = (yy_c_buf_p) - (yytext_ptr);
| ++(yy_c_buf_p);
|
| switch ( yy_get_next_buffer( ) )
| {
| case EOB_ACT_LAST_MATCH:
| /* This happens because yy_g_n_b()
| * sees that we've accumulated a
| * token and flags that we need to
| * try matching the token before
| * proceeding. But for input(),
| * there's no matching to consider.
| * So convert the EOB_ACT_LAST_MATCH
| * to EOB_ACT_END_OF_FILE.
| */
|
| /* Reset buffer status. */
| yyrestart(yyin );
|
| /*FALLTHROUGH*/
|
| case EOB_ACT_END_OF_FILE:
| {
| if ( yywrap( ) )
| return EOF;
|
| if ( ! (yy_did_buffer_switch_on_eof) )
| YY_NEW_FILE;
| #ifdef __cplusplus
| return yyinput();
| #else
| return input();
| #endif
| }
|
| case EOB_ACT_CONTINUE_SCAN:
| (yy_c_buf_p) = (yytext_ptr) + offset;
| break;
| }
| }
| }
|
| c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
| *(yy_c_buf_p) = '\0'; /* preserve yytext */
| (yy_hold_char) = *++(yy_c_buf_p);
|
| return c;
| }
| #endif /* ifndef YY_NO_INPUT */
|
| /** Immediately switch to a different input stream.
| * @param input_file A readable stream.
| *
| * @note This function does not reset the start condition to @c INITIAL .
| */
| void yyrestart (FILE * input_file )
| {
|
| if ( ! YY_CURRENT_BUFFER ){
| yyensure_buffer_stack ();
| YY_CURRENT_BUFFER_LVALUE =
| yy_create_buffer(yyin,YY_BUF_SIZE );
| }
|
| yy_init_buffer(YY_CURRENT_BUFFER,input_file );
| yy_load_buffer_state( );
| }
|
| /** Switch to a different input buffer.
| * @param new_buffer The new input buffer.
| *
| */
| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
| {
|
| /* TODO. We should be able to replace this entire function body
| * with
| * yypop_buffer_state();
| * yypush_buffer_state(new_buffer);
| */
| yyensure_buffer_stack ();
| if ( YY_CURRENT_BUFFER == new_buffer )
| return;
|
| if ( YY_CURRENT_BUFFER )
| {
| /* Flush out information for old buffer. */
| *(yy_c_buf_p) = (yy_hold_char);
| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| YY_CURRENT_BUFFER_LVALUE = new_buffer;
| yy_load_buffer_state( );
|
| /* We don't actually know whether we did this switch during
| * EOF (yywrap()) processing, but the only time this flag
| * is looked at is after yywrap() is called, so it's safe
| * to go ahead and always set it.
| */
| (yy_did_buffer_switch_on_eof) = 1;
| }
|
| static void yy_load_buffer_state (void)
| {
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
| (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
| yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
| (yy_hold_char) = *(yy_c_buf_p);
| }
|
| /** Allocate and initialize an input buffer state.
| * @param file A readable stream.
| * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
| *
| * @return the allocated buffer state.
| */
| YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
| {
| YY_BUFFER_STATE b;
|
| b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
| if ( ! b )
| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
|
| b->yy_buf_size = size;
|
| /* yy_ch_buf has to be 2 characters longer than the size given because
| * we need to put in 2 end-of-buffer characters.
| */
| b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 );
| if ( ! b->yy_ch_buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
|
| b->yy_is_our_buffer = 1;
|
| yy_init_buffer(b,file );
|
| return b;
| }
|
| /** Destroy the buffer.
| * @param b a buffer created with yy_create_buffer()
| *
| */
| void yy_delete_buffer (YY_BUFFER_STATE b )
| {
|
| if ( ! b )
| return;
|
| if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
| YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
|
| if ( b->yy_is_our_buffer )
| yyfree((void *) b->yy_ch_buf );
|
| yyfree((void *) b );
| }
|
| #ifndef __cplusplus
| extern int isatty (int );
| #endif /* __cplusplus */
|
| /* Initializes or reinitializes a buffer.
| * This function is sometimes called more than once on the same buffer,
| * such as during a yyrestart() or at EOF.
| */
| static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
|
| {
| int oerrno = errno;
|
| yy_flush_buffer(b );
|
| b->yy_input_file = file;
| b->yy_fill_buffer = 1;
|
| /* If b is the current buffer, then yy_init_buffer was _probably_
| * called from yyrestart() or through yy_get_next_buffer.
| * In that case, we don't want to reset the lineno or column.
| */
| if (b != YY_CURRENT_BUFFER){
| b->yy_bs_lineno = 1;
| b->yy_bs_column = 0;
| }
|
| b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
|
| errno = oerrno;
| }
|
| /** Discard all buffered characters. On the next scan, YY_INPUT will be called.
| * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
| *
| */
| void yy_flush_buffer (YY_BUFFER_STATE b )
| {
| if ( ! b )
| return;
|
| b->yy_n_chars = 0;
|
| /* We always need two end-of-buffer characters. The first causes
| * a transition to the end-of-buffer state. The second causes
| * a jam in that state.
| */
| b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
| b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
|
| b->yy_buf_pos = &b->yy_ch_buf[0];
|
| b->yy_at_bol = 1;
| b->yy_buffer_status = YY_BUFFER_NEW;
|
| if ( b == YY_CURRENT_BUFFER )
| yy_load_buffer_state( );
| }
|
| /** Pushes the new state onto the stack. The new state becomes
| * the current state. This function will allocate the stack
| * if necessary.
| * @param new_buffer The new state.
| *
| */
| void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
| {
| if (new_buffer == NULL)
| return;
|
| yyensure_buffer_stack();
|
| /* This block is copied from yy_switch_to_buffer. */
| if ( YY_CURRENT_BUFFER )
| {
| /* Flush out information for old buffer. */
| *(yy_c_buf_p) = (yy_hold_char);
| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| /* Only push if top exists. Otherwise, replace top. */
| if (YY_CURRENT_BUFFER)
| (yy_buffer_stack_top)++;
| YY_CURRENT_BUFFER_LVALUE = new_buffer;
|
| /* copied from yy_switch_to_buffer. */
| yy_load_buffer_state( );
| (yy_did_buffer_switch_on_eof) = 1;
| }
|
| /** Removes and deletes the top of the stack, if present.
| * The next element becomes the new top.
| *
| */
| void yypop_buffer_state (void)
| {
| if (!YY_CURRENT_BUFFER)
| return;
|
| yy_delete_buffer(YY_CURRENT_BUFFER );
| YY_CURRENT_BUFFER_LVALUE = NULL;
| if ((yy_buffer_stack_top) > 0)
| --(yy_buffer_stack_top);
|
| if (YY_CURRENT_BUFFER) {
| yy_load_buffer_state( );
| (yy_did_buffer_switch_on_eof) = 1;
| }
| }
|
| /* Allocates the stack if it does not exist.
| * Guarantees space for at least one push.
| */
| static void yyensure_buffer_stack (void)
| {
| int num_to_alloc;
|
| if (!(yy_buffer_stack)) {
|
| /* First allocation is just for 2 elements, since we don't know if this
| * scanner will even need a stack. We use 2 instead of 1 to avoid an
| * immediate realloc on the next call.
| */
| num_to_alloc = 1;
| (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
| (num_to_alloc * sizeof(struct yy_buffer_state*)
| );
| if ( ! (yy_buffer_stack) )
| YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
|
| memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
|
| (yy_buffer_stack_max) = num_to_alloc;
| (yy_buffer_stack_top) = 0;
| return;
| }
|
| if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
|
| /* Increase the buffer to prepare for a possible push. */
| int grow_size = 8 /* arbitrary grow size */;
|
| num_to_alloc = (yy_buffer_stack_max) + grow_size;
| (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
| ((yy_buffer_stack),
| num_to_alloc * sizeof(struct yy_buffer_state*)
| );
| if ( ! (yy_buffer_stack) )
| YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
|
| /* zero only the new slots.*/
| memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
| (yy_buffer_stack_max) = num_to_alloc;
| }
| }
|
| /** Setup the input buffer state to scan directly from a user-specified character buffer.
| * @param base the character buffer
| * @param size the size in bytes of the character buffer
| *
| * @return the newly allocated buffer state object.
| */
| YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
| {
| YY_BUFFER_STATE b;
|
| if ( size < 2 ||
| base[size-2] != YY_END_OF_BUFFER_CHAR ||
| base[size-1] != YY_END_OF_BUFFER_CHAR )
| /* They forgot to leave room for the EOB's. */
| return 0;
|
| b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
| if ( ! b )
| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
|
| b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
| b->yy_buf_pos = b->yy_ch_buf = base;
| b->yy_is_our_buffer = 0;
| b->yy_input_file = 0;
| b->yy_n_chars = b->yy_buf_size;
| b->yy_is_interactive = 0;
| b->yy_at_bol = 1;
| b->yy_fill_buffer = 0;
| b->yy_buffer_status = YY_BUFFER_NEW;
|
| yy_switch_to_buffer(b );
|
| return b;
| }
|
| /** Setup the input buffer state to scan a string. The next call to yylex() will
| * scan from a @e copy of @a str.
| * @param yystr a NUL-terminated string to scan
| *
| * @return the newly allocated buffer state object.
| * @note If you want to scan bytes that may contain NUL values, then use
| * yy_scan_bytes() instead.
| */
| YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
| {
|
| return yy_scan_bytes(yystr,strlen(yystr) );
| }
|
| /** Setup the input buffer state to scan the given bytes. The next call to yylex() will
| * scan from a @e copy of @a bytes.
| * @param bytes the byte buffer to scan
| * @param len the number of bytes in the buffer pointed to by @a bytes.
| *
| * @return the newly allocated buffer state object.
| */
| YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len )
| {
| YY_BUFFER_STATE b;
| char *buf;
| yy_size_t n;
| int i;
|
| /* Get memory for full buffer, including space for trailing EOB's. */
| n = _yybytes_len + 2;
| buf = (char *) yyalloc(n );
| if ( ! buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
|
| for ( i = 0; i < _yybytes_len; ++i )
| buf[i] = yybytes[i];
|
| buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
|
| b = yy_scan_buffer(buf,n );
| if ( ! b )
| YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
|
| /* It's okay to grow etc. this buffer, and we should throw it
| * away when we're done.
| */
| b->yy_is_our_buffer = 1;
|
| return b;
| }
|
| #ifndef YY_EXIT_FAILURE
| #define YY_EXIT_FAILURE 2
| #endif
|
| static void yy_fatal_error (yyconst char* msg )
| {
| (void) fprintf( stderr, "%s\n", msg );
| exit( YY_EXIT_FAILURE );
| }
|
| /* Redefine yyless() so it works in section 3 code. */
|
| #undef yyless
| #define yyless(n) \
| do \
| { \
| /* Undo effects of setting up yytext. */ \
| int yyless_macro_arg = (n); \
| YY_LESS_LINENO(yyless_macro_arg);\
| yytext[yyleng] = (yy_hold_char); \
| (yy_c_buf_p) = yytext + yyless_macro_arg; \
| (yy_hold_char) = *(yy_c_buf_p); \
| *(yy_c_buf_p) = '\0'; \
| yyleng = yyless_macro_arg; \
| } \
| while ( 0 )
|
| /* Accessor methods (get/set functions) to struct members. */
|
| /** Get the current line number.
| *
| */
| int yyget_lineno (void)
| {
|
| return yylineno;
| }
|
| /** Get the input stream.
| *
| */
| FILE *yyget_in (void)
| {
| return yyin;
| }
|
| /** Get the output stream.
| *
| */
| FILE *yyget_out (void)
| {
| return yyout;
| }
|
| /** Get the length of the current token.
| *
| */
| int yyget_leng (void)
| {
| return yyleng;
| }
|
| /** Get the current token.
| *
| */
|
| char *yyget_text (void)
| {
| return yytext;
| }
|
| /** Set the current line number.
| * @param line_number
| *
| */
| void yyset_lineno (int line_number )
| {
|
| yylineno = line_number;
| }
|
| /** Set the input stream. This does not discard the current
| * input buffer.
| * @param in_str A readable stream.
| *
| * @see yy_switch_to_buffer
| */
| void yyset_in (FILE * in_str )
| {
| yyin = in_str ;
| }
|
| void yyset_out (FILE * out_str )
| {
| yyout = out_str ;
| }
|
| int yyget_debug (void)
| {
| return yy_flex_debug;
| }
|
| void yyset_debug (int bdebug )
| {
| yy_flex_debug = bdebug ;
| }
|
| static int yy_init_globals (void)
| {
| /* Initialization is the same as for the non-reentrant scanner.
| * This function is called from yylex_destroy(), so don't allocate here.
| */
|
| (yy_buffer_stack) = 0;
| (yy_buffer_stack_top) = 0;
| (yy_buffer_stack_max) = 0;
| (yy_c_buf_p) = (char *) 0;
| (yy_init) = 0;
| (yy_start) = 0;
|
| (yy_state_buf) = 0;
| (yy_state_ptr) = 0;
| (yy_full_match) = 0;
| (yy_lp) = 0;
|
| /* Defined in main.c */
| #ifdef YY_STDINIT
| yyin = stdin;
| yyout = stdout;
| #else
| yyin = (FILE *) 0;
| yyout = (FILE *) 0;
| #endif
|
| /* For future reference: Set errno on error, since we are called by
| * yylex_init()
| */
| return 0;
| }
|
| /* yylex_destroy is for both reentrant and non-reentrant scanners. */
| int yylex_destroy (void)
| {
|
| /* Pop the buffer stack, destroying each element. */
| while(YY_CURRENT_BUFFER){
| yy_delete_buffer(YY_CURRENT_BUFFER );
| YY_CURRENT_BUFFER_LVALUE = NULL;
| yypop_buffer_state();
| }
|
| /* Destroy the stack itself. */
| yyfree((yy_buffer_stack) );
| (yy_buffer_stack) = NULL;
|
| yyfree ( (yy_state_buf) );
| (yy_state_buf) = NULL;
|
| /* Reset the globals. This is important in a non-reentrant scanner so the next time
| * yylex() is called, initialization will occur. */
| yy_init_globals( );
|
| return 0;
| }
|
| /*
| * Internal utility routines.
| */
|
| #ifndef yytext_ptr
| static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
| {
| register int i;
| for ( i = 0; i < n; ++i )
| s1[i] = s2[i];
| }
| #endif
|
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen (yyconst char * s )
| {
| register int n;
| for ( n = 0; s[n]; ++n )
| ;
|
| return n;
| }
| #endif
|
| void *yyalloc (yy_size_t size )
| {
| return (void *) malloc( size );
| }
|
| void *yyrealloc (void * ptr, yy_size_t size )
| {
| /* The cast to (char *) in the following accommodates both
| * implementations that use char* generic pointers, and those
| * that use void* generic pointers. It works with the latter
| * because both ANSI C and C++ allow castless assignment from
| * any pointer type to void*, and deal with argument conversions
| * as though doing an assignment.
| */
| return (void *) realloc( (char *) ptr, size );
| }
|
| void yyfree (void * ptr )
| {
| free( (char *) ptr ); /* see yyrealloc() for (char *) cast */
| }
|
| #define YYTABLES_NAME "yytables"
|
| #line 9 "conftest.l"
|
|
| #ifdef YYTEXT_POINTER
| extern char *yytext;
| #endif
| int
| main (void)
| {
| return ! yylex () + ! yywrap ();
| }
configure:19990: g++ -o conftest -g -O2 conftest.cpp -lfl >&5
conftest.l: In function 'int yylex()':
conftest.l:6: error: 'input' was not declared in this scope
configure:19997: $? = 1
configure: failed program was:
|
| #line 3 "lex.yy.c"
|
| #define YY_INT_ALIGNED short int
|
| /* A lexical scanner generated by flex */
|
| #define FLEX_SCANNER
| #define YY_FLEX_MAJOR_VERSION 2
| #define YY_FLEX_MINOR_VERSION 5
| #define YY_FLEX_SUBMINOR_VERSION 35
| #if YY_FLEX_SUBMINOR_VERSION > 0
| #define FLEX_BETA
| #endif
|
| /* First, we deal with platform-specific or compiler-specific issues. */
|
| /* begin standard C headers. */
| #include <stdio.h>
| #include <string.h>
| #include <errno.h>
| #include <stdlib.h>
|
| /* end standard C headers. */
|
| /* flex integer type definitions */
|
| #ifndef FLEXINT_H
| #define FLEXINT_H
|
| /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
|
| #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
|
| /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
| * if you want the limit (max/min) macros for int types.
| */
| #ifndef __STDC_LIMIT_MACROS
| #define __STDC_LIMIT_MACROS 1
| #endif
|
| #include <inttypes.h>
| typedef int8_t flex_int8_t;
| typedef uint8_t flex_uint8_t;
| typedef int16_t flex_int16_t;
| typedef uint16_t flex_uint16_t;
| typedef int32_t flex_int32_t;
| typedef uint32_t flex_uint32_t;
| #else
| typedef signed char flex_int8_t;
| typedef short int flex_int16_t;
| typedef int flex_int32_t;
| typedef unsigned char flex_uint8_t;
| typedef unsigned short int flex_uint16_t;
| typedef unsigned int flex_uint32_t;
| #endif /* ! C99 */
|
| /* Limits of integral types. */
| #ifndef INT8_MIN
| #define INT8_MIN (-128)
| #endif
| #ifndef INT16_MIN
| #define INT16_MIN (-32767-1)
| #endif
| #ifndef INT32_MIN
| #define INT32_MIN (-2147483647-1)
| #endif
| #ifndef INT8_MAX
| #define INT8_MAX (127)
| #endif
| #ifndef INT16_MAX
| #define INT16_MAX (32767)
| #endif
| #ifndef INT32_MAX
| #define INT32_MAX (2147483647)
| #endif
| #ifndef UINT8_MAX
| #define UINT8_MAX (255U)
| #endif
| #ifndef UINT16_MAX
| #define UINT16_MAX (65535U)
| #endif
| #ifndef UINT32_MAX
| #define UINT32_MAX (4294967295U)
| #endif
|
| #endif /* ! FLEXINT_H */
|
| #ifdef __cplusplus
|
| /* The "const" storage-class-modifier is valid. */
| #define YY_USE_CONST
|
| #else /* ! __cplusplus */
|
| /* C99 requires __STDC__ to be defined as 1. */
| #if defined (__STDC__)
|
| #define YY_USE_CONST
|
| #endif /* defined (__STDC__) */
| #endif /* ! __cplusplus */
|
| #ifdef YY_USE_CONST
| #define yyconst const
| #else
| #define yyconst
| #endif
|
| /* Returned upon end-of-file. */
| #define YY_NULL 0
|
| /* Promotes a possibly negative, possibly signed char to an unsigned
| * integer for use as an array index. If the signed char is negative,
| * we want to instead treat it as an 8-bit unsigned char, hence the
| * double cast.
| */
| #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
|
| /* Enter a start condition. This macro really ought to take a parameter,
| * but we do it the disgusting crufty way forced on us by the ()-less
| * definition of BEGIN.
| */
| #define BEGIN (yy_start) = 1 + 2 *
|
| /* Translate the current start state into a value that can be later handed
| * to BEGIN to return to the state. The YYSTATE alias is for lex
| * compatibility.
| */
| #define YY_START (((yy_start) - 1) / 2)
| #define YYSTATE YY_START
|
| /* Action number for EOF rule of a given start state. */
| #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
|
| /* Special action meaning "start processing a new file". */
| #define YY_NEW_FILE yyrestart(yyin )
|
| #define YY_END_OF_BUFFER_CHAR 0
|
| /* Size of default input buffer. */
| #ifndef YY_BUF_SIZE
| #define YY_BUF_SIZE 16384
| #endif
|
| /* The state buf must be large enough to hold one state per character in the main buffer.
| */
| #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
|
| #ifndef YY_TYPEDEF_YY_BUFFER_STATE
| #define YY_TYPEDEF_YY_BUFFER_STATE
| typedef struct yy_buffer_state *YY_BUFFER_STATE;
| #endif
|
| extern int yyleng;
|
| extern FILE *yyin, *yyout;
|
| #define EOB_ACT_CONTINUE_SCAN 0
| #define EOB_ACT_END_OF_FILE 1
| #define EOB_ACT_LAST_MATCH 2
|
| #define YY_LESS_LINENO(n)
|
| /* Return all but the first "n" matched characters back to the input stream. */
| #define yyless(n) \
| do \
| { \
| /* Undo effects of setting up yytext. */ \
| int yyless_macro_arg = (n); \
| YY_LESS_LINENO(yyless_macro_arg);\
| *yy_cp = (yy_hold_char); \
| YY_RESTORE_YY_MORE_OFFSET \
| (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
| YY_DO_BEFORE_ACTION; /* set up yytext again */ \
| } \
| while ( 0 )
|
| #define unput(c) yyunput( c, (yytext_ptr) )
|
| #ifndef YY_TYPEDEF_YY_SIZE_T
| #define YY_TYPEDEF_YY_SIZE_T
| typedef size_t yy_size_t;
| #endif
|
| #ifndef YY_STRUCT_YY_BUFFER_STATE
| #define YY_STRUCT_YY_BUFFER_STATE
| struct yy_buffer_state
| {
| FILE *yy_input_file;
|
| char *yy_ch_buf; /* input buffer */
| char *yy_buf_pos; /* current position in input buffer */
|
| /* Size of input buffer in bytes, not including room for EOB
| * characters.
| */
| yy_size_t yy_buf_size;
|
| /* Number of characters read into yy_ch_buf, not including EOB
| * characters.
| */
| int yy_n_chars;
|
| /* Whether we "own" the buffer - i.e., we know we created it,
| * and can realloc() it to grow it, and should free() it to
| * delete it.
| */
| int yy_is_our_buffer;
|
| /* Whether this is an "interactive" input source; if so, and
| * if we're using stdio for input, then we want to use getc()
| * instead of fread(), to make sure we stop fetching input after
| * each newline.
| */
| int yy_is_interactive;
|
| /* Whether we're considered to be at the beginning of a line.
| * If so, '^' rules will be active on the next match, otherwise
| * not.
| */
| int yy_at_bol;
|
| int yy_bs_lineno; /**< The line count. */
| int yy_bs_column; /**< The column count. */
|
| /* Whether to try to fill the input buffer when we reach the
| * end of it.
| */
| int yy_fill_buffer;
|
| int yy_buffer_status;
|
| #define YY_BUFFER_NEW 0
| #define YY_BUFFER_NORMAL 1
| /* When an EOF's been seen but there's still some text to process
| * then we mark the buffer as YY_EOF_PENDING, to indicate that we
| * shouldn't try reading from the input source any more. We might
| * still have a bunch of tokens to match, though, because of
| * possible backing-up.
| *
| * When we actually see the EOF, we change the status to "new"
| * (via yyrestart()), so that the user can continue scanning by
| * just pointing yyin at a new input file.
| */
| #define YY_BUFFER_EOF_PENDING 2
|
| };
| #endif /* !YY_STRUCT_YY_BUFFER_STATE */
|
| /* Stack of input buffers. */
| static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
| static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
| static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
|
| /* We provide macros for accessing buffer states in case in the
| * future we want to put the buffer states in a more general
| * "scanner state".
| *
| * Returns the top of the stack, or NULL.
| */
| #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
| ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
| : NULL)
|
| /* Same as previous macro, but useful when we know that the buffer stack is not
| * NULL or when we need an lvalue. For internal use only.
| */
| #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
|
| /* yy_hold_char holds the character lost when yytext is formed. */
| static char yy_hold_char;
| static int yy_n_chars; /* number of characters read into yy_ch_buf */
| int yyleng;
|
| /* Points to current character in buffer. */
| static char *yy_c_buf_p = (char *) 0;
| static int yy_init = 0; /* whether we need to initialize */
| static int yy_start = 0; /* start state number */
|
| /* Flag which is used to allow yywrap()'s to do buffer switches
| * instead of setting up a fresh yyin. A bit of a hack ...
| */
| static int yy_did_buffer_switch_on_eof;
|
| void yyrestart (FILE *input_file );
| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer );
| YY_BUFFER_STATE yy_create_buffer (FILE *file,int size );
| void yy_delete_buffer (YY_BUFFER_STATE b );
| void yy_flush_buffer (YY_BUFFER_STATE b );
| void yypush_buffer_state (YY_BUFFER_STATE new_buffer );
| void yypop_buffer_state (void );
|
| static void yyensure_buffer_stack (void );
| static void yy_load_buffer_state (void );
| static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file );
|
| #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
|
| YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size );
| YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str );
| YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len );
|
| void *yyalloc (yy_size_t );
| void *yyrealloc (void *,yy_size_t );
| void yyfree (void * );
|
| #define yy_new_buffer yy_create_buffer
|
| #define yy_set_interactive(is_interactive) \
| { \
| if ( ! YY_CURRENT_BUFFER ){ \
| yyensure_buffer_stack (); \
| YY_CURRENT_BUFFER_LVALUE = \
| yy_create_buffer(yyin,YY_BUF_SIZE ); \
| } \
| YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
| }
|
| #define yy_set_bol(at_bol) \
| { \
| if ( ! YY_CURRENT_BUFFER ){\
| yyensure_buffer_stack (); \
| YY_CURRENT_BUFFER_LVALUE = \
| yy_create_buffer(yyin,YY_BUF_SIZE ); \
| } \
| YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
| }
|
| #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
|
| /* Begin user sect3 */
|
| typedef unsigned char YY_CHAR;
|
| FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
|
| typedef int yy_state_type;
|
| extern int yylineno;
|
| int yylineno = 1;
|
| extern char *yytext;
| #define yytext_ptr yytext
|
| static yy_state_type yy_get_previous_state (void );
| static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
| static int yy_get_next_buffer (void );
| static void yy_fatal_error (yyconst char msg[] );
|
| /* Done after the current pattern has been matched and before the
| * corresponding action - sets up yytext.
| */
| #define YY_DO_BEFORE_ACTION \
| (yytext_ptr) = yy_bp; \
| (yytext_ptr) -= (yy_more_len); \
| yyleng = (size_t) (yy_cp - (yytext_ptr)); \
| (yy_hold_char) = *yy_cp; \
| *yy_cp = '\0'; \
| (yy_c_buf_p) = yy_cp;
|
| #define YY_NUM_RULES 8
| #define YY_END_OF_BUFFER 9
| /* This struct is not used in this scanner,
| but its presence is necessary. */
| struct yy_trans_info
| {
| flex_int32_t yy_verify;
| flex_int32_t yy_nxt;
| };
| static yyconst flex_int16_t yy_acclist[23] =
| { 0,
| 9, 7, 8, 8, 1, 7, 8, 2, 7, 8,
| 3, 7, 8, 4, 7, 8, 5, 7, 8, 6,
| 7, 8
| } ;
|
| static yyconst flex_int16_t yy_accept[14] =
| { 0,
| 1, 1, 1, 2, 4, 5, 8, 11, 14, 17,
| 20, 23, 23
| } ;
|
| static yyconst flex_int32_t yy_ec[256] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 2,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 3, 4, 5, 6,
|
| 7, 8, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
|
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1
| } ;
|
| static yyconst flex_int32_t yy_meta[9] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1
| } ;
|
| static yyconst flex_int16_t yy_base[13] =
| { 0,
| 0, 0, 9, 10, 10, 10, 10, 10, 10, 10,
| 10, 10
| } ;
|
| static yyconst flex_int16_t yy_def[13] =
| { 0,
| 12, 1, 12, 12, 12, 12, 12, 12, 12, 12,
| 12, 0
| } ;
|
| static yyconst flex_int16_t yy_nxt[19] =
| { 0,
| 4, 5, 6, 7, 8, 9, 10, 11, 12, 3,
| 12, 12, 12, 12, 12, 12, 12, 12
| } ;
|
| static yyconst flex_int16_t yy_chk[19] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1, 3, 12,
| 12, 12, 12, 12, 12, 12, 12, 12
| } ;
|
| extern int yy_flex_debug;
| int yy_flex_debug = 0;
|
| static yy_state_type *yy_state_buf=0, *yy_state_ptr=0;
| static char *yy_full_match;
| static int yy_lp;
| #define REJECT \
| { \
| *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \
| yy_cp = (yy_full_match); /* restore poss. backed-over text */ \
| ++(yy_lp); \
| goto find_rule; \
| }
|
| static int yy_more_flag = 0;
| static int yy_more_len = 0;
| #define yymore() ((yy_more_flag) = 1)
| #define YY_MORE_ADJ (yy_more_len)
| #define YY_RESTORE_YY_MORE_OFFSET
| char *yytext;
| #line 1 "conftest.l"
| #line 468 "lex.yy.c"
|
| #define INITIAL 0
|
| #ifndef YY_NO_UNISTD_H
| /* Special case for "unistd.h", since it is non-ANSI. We include it way
| * down here because we want the user's section 1 to have been scanned first.
| * The user has a chance to override it with an option.
| */
| #include <unistd.h>
| #endif
|
| #ifndef YY_EXTRA_TYPE
| #define YY_EXTRA_TYPE void *
| #endif
|
| static int yy_init_globals (void );
|
| /* Accessor methods to globals.
| These are made visible to non-reentrant scanners for convenience. */
|
| int yylex_destroy (void );
|
| int yyget_debug (void );
|
| void yyset_debug (int debug_flag );
|
| YY_EXTRA_TYPE yyget_extra (void );
|
| void yyset_extra (YY_EXTRA_TYPE user_defined );
|
| FILE *yyget_in (void );
|
| void yyset_in (FILE * in_str );
|
| FILE *yyget_out (void );
|
| void yyset_out (FILE * out_str );
|
| int yyget_leng (void );
|
| char *yyget_text (void );
|
| int yyget_lineno (void );
|
| void yyset_lineno (int line_number );
|
| /* Macros after this point can all be overridden by user definitions in
| * section 1.
| */
|
| #ifndef YY_SKIP_YYWRAP
| #ifdef __cplusplus
| extern "C" int yywrap (void );
| #else
| extern int yywrap (void );
| #endif
| #endif
|
| static void yyunput (int c,char *buf_ptr );
|
| #ifndef yytext_ptr
| static void yy_flex_strncpy (char *,yyconst char *,int );
| #endif
|
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen (yyconst char * );
| #endif
|
| #ifndef YY_NO_INPUT
|
| #ifdef __cplusplus
| static int yyinput (void );
| #else
| static int input (void );
| #endif
|
| #endif
|
| /* Amount of stuff to slurp up with each read. */
| #ifndef YY_READ_BUF_SIZE
| #define YY_READ_BUF_SIZE 8192
| #endif
|
| /* Copy whatever the last rule matched to the standard output. */
| #ifndef ECHO
| /* This used to be an fputs(), but since the string might contain NUL's,
| * we now use fwrite().
| */
| #define ECHO fwrite( yytext, yyleng, 1, yyout )
| #endif
|
| /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
| * is returned in "result".
| */
| #ifndef YY_INPUT
| #define YY_INPUT(buf,result,max_size) \
| if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
| { \
| int c = '*'; \
| int n; \
| for ( n = 0; n < max_size && \
| (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
| buf[n] = (char) c; \
| if ( c == '\n' ) \
| buf[n++] = (char) c; \
| if ( c == EOF && ferror( yyin ) ) \
| YY_FATAL_ERROR( "input in flex scanner failed" ); \
| result = n; \
| } \
| else \
| { \
| errno=0; \
| while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
| { \
| if( errno != EINTR) \
| { \
| YY_FATAL_ERROR( "input in flex scanner failed" ); \
| break; \
| } \
| errno=0; \
| clearerr(yyin); \
| } \
| }\
| \
|
| #endif
|
| /* No semi-colon after return; correct usage is to write "yyterminate();" -
| * we don't want an extra ';' after the "return" because that will cause
| * some compilers to complain about unreachable statements.
| */
| #ifndef yyterminate
| #define yyterminate() return YY_NULL
| #endif
|
| /* Number of entries by which start-condition stack grows. */
| #ifndef YY_START_STACK_INCR
| #define YY_START_STACK_INCR 25
| #endif
|
| /* Report a fatal error. */
| #ifndef YY_FATAL_ERROR
| #define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
| #endif
|
| /* end tables serialization structures and prototypes */
|
| /* Default declaration of generated scanner - a define so the user can
| * easily add parameters.
| */
| #ifndef YY_DECL
| #define YY_DECL_IS_OURS 1
|
| extern int yylex (void);
|
| #define YY_DECL int yylex (void)
| #endif /* !YY_DECL */
|
| /* Code executed at the beginning of each rule, after yytext and yyleng
| * have been set up.
| */
| #ifndef YY_USER_ACTION
| #define YY_USER_ACTION
| #endif
|
| /* Code executed at the end of each rule. */
| #ifndef YY_BREAK
| #define YY_BREAK break;
| #endif
|
| #define YY_RULE_SETUP \
| YY_USER_ACTION
|
| /** The main scanner function which does all the work.
| */
| YY_DECL
| {
| register yy_state_type yy_current_state;
| register char *yy_cp, *yy_bp;
| register int yy_act;
|
| #line 1 "conftest.l"
|
| #line 652 "lex.yy.c"
|
| if ( !(yy_init) )
| {
| (yy_init) = 1;
|
| #ifdef YY_USER_INIT
| YY_USER_INIT;
| #endif
|
| /* Create the reject buffer large enough to save one state per allowed character. */
| if ( ! (yy_state_buf) )
| (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE );
| if ( ! (yy_state_buf) )
| YY_FATAL_ERROR( "out of dynamic memory in yylex()" );
|
| if ( ! (yy_start) )
| (yy_start) = 1; /* first start state */
|
| if ( ! yyin )
| yyin = stdin;
|
| if ( ! yyout )
| yyout = stdout;
|
| if ( ! YY_CURRENT_BUFFER ) {
| yyensure_buffer_stack ();
| YY_CURRENT_BUFFER_LVALUE =
| yy_create_buffer(yyin,YY_BUF_SIZE );
| }
|
| yy_load_buffer_state( );
| }
|
| while ( 1 ) /* loops until end-of-file is reached */
| {
| (yy_more_len) = 0;
| if ( (yy_more_flag) )
| {
| (yy_more_len) = (yy_c_buf_p) - (yytext_ptr);
| (yy_more_flag) = 0;
| }
| yy_cp = (yy_c_buf_p);
|
| /* Support of yytext. */
| *yy_cp = (yy_hold_char);
|
| /* yy_bp points to the position in yy_ch_buf of the start of
| * the current run.
| */
| yy_bp = yy_cp;
|
| yy_current_state = (yy_start);
|
| (yy_state_ptr) = (yy_state_buf);
| *(yy_state_ptr)++ = yy_current_state;
|
| yy_match:
| do
| {
| register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| *(yy_state_ptr)++ = yy_current_state;
| ++yy_cp;
| }
| while ( yy_base[yy_current_state] != 10 );
|
| yy_find_action:
| yy_current_state = *--(yy_state_ptr);
| (yy_lp) = yy_accept[yy_current_state];
| find_rule: /* we branch to this label when backing up */
| for ( ; ; ) /* until we find what rule we matched */
| {
| if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] )
| {
| yy_act = yy_acclist[(yy_lp)];
| {
| (yy_full_match) = yy_cp;
| break;
| }
| }
| --yy_cp;
| yy_current_state = *--(yy_state_ptr);
| (yy_lp) = yy_accept[yy_current_state];
| }
|
| YY_DO_BEFORE_ACTION;
|
| do_action: /* This label is used only to access EOF actions. */
|
| switch ( yy_act )
| { /* beginning of action switch */
| case 1:
| YY_RULE_SETUP
| #line 2 "conftest.l"
| { ECHO; }
| YY_BREAK
| case 2:
| YY_RULE_SETUP
| #line 3 "conftest.l"
| { REJECT; }
| YY_BREAK
| case 3:
| YY_RULE_SETUP
| #line 4 "conftest.l"
| { yymore (); }
| YY_BREAK
| case 4:
| YY_RULE_SETUP
| #line 5 "conftest.l"
| { yyless (1); }
| YY_BREAK
| case 5:
| YY_RULE_SETUP
| #line 6 "conftest.l"
| { yyless (input () != 0); }
| YY_BREAK
| case 6:
| YY_RULE_SETUP
| #line 7 "conftest.l"
| { unput (yytext[0]); }
| YY_BREAK
| case 7:
| YY_RULE_SETUP
| #line 8 "conftest.l"
| { BEGIN INITIAL; }
| YY_BREAK
| case 8:
| YY_RULE_SETUP
| #line 9 "conftest.l"
| ECHO;
| YY_BREAK
| #line 790 "lex.yy.c"
| case YY_STATE_EOF(INITIAL):
| yyterminate();
|
| case YY_END_OF_BUFFER:
| {
| /* Amount of text matched not including the EOB char. */
| int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
|
| /* Undo the effects of YY_DO_BEFORE_ACTION. */
| *yy_cp = (yy_hold_char);
| YY_RESTORE_YY_MORE_OFFSET
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
| {
| /* We're scanning a new file or input source. It's
| * possible that this happened because the user
| * just pointed yyin at a new source and called
| * yylex(). If so, then we have to assure
| * consistency between YY_CURRENT_BUFFER and our
| * globals. Here is the right place to do so, because
| * this is the first action (other than possibly a
| * back-up) that will match for the new input source.
| */
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
| YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
| }
|
| /* Note that here we test for yy_c_buf_p "<=" to the position
| * of the first EOB in the buffer, since yy_c_buf_p will
| * already have been incremented past the NUL character
| * (since all states make transitions on EOB to the
| * end-of-buffer state). Contrast this with the test
| * in input().
| */
| if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
| { /* This was really a NUL. */
| yy_state_type yy_next_state;
|
| (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
|
| yy_current_state = yy_get_previous_state( );
|
| /* Okay, we're now positioned to make the NUL
| * transition. We couldn't have
| * yy_get_previous_state() go ahead and do it
| * for us because it doesn't know how to deal
| * with the possibility of jamming (and we don't
| * want to build jamming into it because then it
| * will run more slowly).
| */
|
| yy_next_state = yy_try_NUL_trans( yy_current_state );
|
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
|
| if ( yy_next_state )
| {
| /* Consume the NUL. */
| yy_cp = ++(yy_c_buf_p);
| yy_current_state = yy_next_state;
| goto yy_match;
| }
|
| else
| {
| yy_cp = (yy_c_buf_p);
| goto yy_find_action;
| }
| }
|
| else switch ( yy_get_next_buffer( ) )
| {
| case EOB_ACT_END_OF_FILE:
| {
| (yy_did_buffer_switch_on_eof) = 0;
|
| if ( yywrap( ) )
| {
| /* Note: because we've taken care in
| * yy_get_next_buffer() to have set up
| * yytext, we can now set up
| * yy_c_buf_p so that if some total
| * hoser (like flex itself) wants to
| * call the scanner after we return the
| * YY_NULL, it'll still work - another
| * YY_NULL will get returned.
| */
| (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
|
| yy_act = YY_STATE_EOF(YY_START);
| goto do_action;
| }
|
| else
| {
| if ( ! (yy_did_buffer_switch_on_eof) )
| YY_NEW_FILE;
| }
| break;
| }
|
| case EOB_ACT_CONTINUE_SCAN:
| (yy_c_buf_p) =
| (yytext_ptr) + yy_amount_of_matched_text;
|
| yy_current_state = yy_get_previous_state( );
|
| yy_cp = (yy_c_buf_p);
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| goto yy_match;
|
| case EOB_ACT_LAST_MATCH:
| (yy_c_buf_p) =
| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
|
| yy_current_state = yy_get_previous_state( );
|
| yy_cp = (yy_c_buf_p);
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| goto yy_find_action;
| }
| break;
| }
|
| default:
| YY_FATAL_ERROR(
| "fatal flex scanner internal error--no action found" );
| } /* end of action switch */
| } /* end of scanning one token */
| } /* end of yylex */
|
| /* yy_get_next_buffer - try to read in a new buffer
| *
| * Returns a code representing an action:
| * EOB_ACT_LAST_MATCH -
| * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
| * EOB_ACT_END_OF_FILE - end of file
| */
| static int yy_get_next_buffer (void)
| {
| register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
| register char *source = (yytext_ptr);
| register int number_to_move, i;
| int ret_val;
|
| if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
| YY_FATAL_ERROR(
| "fatal flex scanner internal error--end of buffer missed" );
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
| { /* Don't try to fill the buffer, so this is an EOF. */
| if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
| {
| /* We matched a single character, the EOB, so
| * treat this as a final EOF.
| */
| return EOB_ACT_END_OF_FILE;
| }
|
| else
| {
| /* We matched some text prior to the EOB, first
| * process it.
| */
| return EOB_ACT_LAST_MATCH;
| }
| }
|
| /* Try to read more data. */
|
| /* First move last chars to start of buffer. */
| number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
|
| for ( i = 0; i < number_to_move; ++i )
| *(dest++) = *(source++);
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
| /* don't do the read, it's not guaranteed to return an EOF,
| * just force an EOF
| */
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
|
| else
| {
| int num_to_read =
| YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
|
| while ( num_to_read <= 0 )
| { /* Not enough room in the buffer - grow it. */
|
| YY_FATAL_ERROR(
| "input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
|
| }
|
| if ( num_to_read > YY_READ_BUF_SIZE )
| num_to_read = YY_READ_BUF_SIZE;
|
| /* Read in more data. */
| YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
| (yy_n_chars), (size_t) num_to_read );
|
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| if ( (yy_n_chars) == 0 )
| {
| if ( number_to_move == YY_MORE_ADJ )
| {
| ret_val = EOB_ACT_END_OF_FILE;
| yyrestart(yyin );
| }
|
| else
| {
| ret_val = EOB_ACT_LAST_MATCH;
| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
| YY_BUFFER_EOF_PENDING;
| }
| }
|
| else
| ret_val = EOB_ACT_CONTINUE_SCAN;
|
| if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
| /* Extend the array by 50%, plus the number we really need. */
| yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
| if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
| }
|
| (yy_n_chars) += number_to_move;
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
|
| (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
|
| return ret_val;
| }
|
| /* yy_get_previous_state - get the state just before the EOB char was reached */
|
| static yy_state_type yy_get_previous_state (void)
| {
| register yy_state_type yy_current_state;
| register char *yy_cp;
|
| yy_current_state = (yy_start);
|
| (yy_state_ptr) = (yy_state_buf);
| *(yy_state_ptr)++ = yy_current_state;
|
| for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
| {
| register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| *(yy_state_ptr)++ = yy_current_state;
| }
|
| return yy_current_state;
| }
|
| /* yy_try_NUL_trans - try to make a transition on the NUL character
| *
| * synopsis
| * next_state = yy_try_NUL_trans( current_state );
| */
| static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
| {
| register int yy_is_jam;
|
| register YY_CHAR yy_c = 1;
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| yy_is_jam = (yy_current_state == 12);
| if ( ! yy_is_jam )
| *(yy_state_ptr)++ = yy_current_state;
|
| return yy_is_jam ? 0 : yy_current_state;
| }
|
| static void yyunput (int c, register char * yy_bp )
| {
| register char *yy_cp;
|
| yy_cp = (yy_c_buf_p);
|
| /* undo effects of setting up yytext */
| *yy_cp = (yy_hold_char);
|
| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
| { /* need to shift things up to make room */
| /* +2 for EOB chars. */
| register int number_to_move = (yy_n_chars) + 2;
| register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
| YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
| register char *source =
| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
|
| while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
| *--dest = *--source;
|
| yy_cp += (int) (dest - source);
| yy_bp += (int) (dest - source);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
|
| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
| YY_FATAL_ERROR( "flex scanner push-back overflow" );
| }
|
| *--yy_cp = (char) c;
|
| (yytext_ptr) = yy_bp;
| (yy_hold_char) = *yy_cp;
| (yy_c_buf_p) = yy_cp;
| }
|
| #ifndef YY_NO_INPUT
| #ifdef __cplusplus
| static int yyinput (void)
| #else
| static int input (void)
| #endif
|
| {
| int c;
|
| *(yy_c_buf_p) = (yy_hold_char);
|
| if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
| {
| /* yy_c_buf_p now points to the character we want to return.
| * If this occurs *before* the EOB characters, then it's a
| * valid NUL; if not, then we've hit the end of the buffer.
| */
| if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
| /* This was really a NUL. */
| *(yy_c_buf_p) = '\0';
|
| else
| { /* need more input */
| int offset = (yy_c_buf_p) - (yytext_ptr);
| ++(yy_c_buf_p);
|
| switch ( yy_get_next_buffer( ) )
| {
| case EOB_ACT_LAST_MATCH:
| /* This happens because yy_g_n_b()
| * sees that we've accumulated a
| * token and flags that we need to
| * try matching the token before
| * proceeding. But for input(),
| * there's no matching to consider.
| * So convert the EOB_ACT_LAST_MATCH
| * to EOB_ACT_END_OF_FILE.
| */
|
| /* Reset buffer status. */
| yyrestart(yyin );
|
| /*FALLTHROUGH*/
|
| case EOB_ACT_END_OF_FILE:
| {
| if ( yywrap( ) )
| return EOF;
|
| if ( ! (yy_did_buffer_switch_on_eof) )
| YY_NEW_FILE;
| #ifdef __cplusplus
| return yyinput();
| #else
| return input();
| #endif
| }
|
| case EOB_ACT_CONTINUE_SCAN:
| (yy_c_buf_p) = (yytext_ptr) + offset;
| break;
| }
| }
| }
|
| c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
| *(yy_c_buf_p) = '\0'; /* preserve yytext */
| (yy_hold_char) = *++(yy_c_buf_p);
|
| return c;
| }
| #endif /* ifndef YY_NO_INPUT */
|
| /** Immediately switch to a different input stream.
| * @param input_file A readable stream.
| *
| * @note This function does not reset the start condition to @c INITIAL .
| */
| void yyrestart (FILE * input_file )
| {
|
| if ( ! YY_CURRENT_BUFFER ){
| yyensure_buffer_stack ();
| YY_CURRENT_BUFFER_LVALUE =
| yy_create_buffer(yyin,YY_BUF_SIZE );
| }
|
| yy_init_buffer(YY_CURRENT_BUFFER,input_file );
| yy_load_buffer_state( );
| }
|
| /** Switch to a different input buffer.
| * @param new_buffer The new input buffer.
| *
| */
| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
| {
|
| /* TODO. We should be able to replace this entire function body
| * with
| * yypop_buffer_state();
| * yypush_buffer_state(new_buffer);
| */
| yyensure_buffer_stack ();
| if ( YY_CURRENT_BUFFER == new_buffer )
| return;
|
| if ( YY_CURRENT_BUFFER )
| {
| /* Flush out information for old buffer. */
| *(yy_c_buf_p) = (yy_hold_char);
| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| YY_CURRENT_BUFFER_LVALUE = new_buffer;
| yy_load_buffer_state( );
|
| /* We don't actually know whether we did this switch during
| * EOF (yywrap()) processing, but the only time this flag
| * is looked at is after yywrap() is called, so it's safe
| * to go ahead and always set it.
| */
| (yy_did_buffer_switch_on_eof) = 1;
| }
|
| static void yy_load_buffer_state (void)
| {
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
| (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
| yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
| (yy_hold_char) = *(yy_c_buf_p);
| }
|
| /** Allocate and initialize an input buffer state.
| * @param file A readable stream.
| * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
| *
| * @return the allocated buffer state.
| */
| YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
| {
| YY_BUFFER_STATE b;
|
| b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
| if ( ! b )
| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
|
| b->yy_buf_size = size;
|
| /* yy_ch_buf has to be 2 characters longer than the size given because
| * we need to put in 2 end-of-buffer characters.
| */
| b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 );
| if ( ! b->yy_ch_buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
|
| b->yy_is_our_buffer = 1;
|
| yy_init_buffer(b,file );
|
| return b;
| }
|
| /** Destroy the buffer.
| * @param b a buffer created with yy_create_buffer()
| *
| */
| void yy_delete_buffer (YY_BUFFER_STATE b )
| {
|
| if ( ! b )
| return;
|
| if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
| YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
|
| if ( b->yy_is_our_buffer )
| yyfree((void *) b->yy_ch_buf );
|
| yyfree((void *) b );
| }
|
| #ifndef __cplusplus
| extern int isatty (int );
| #endif /* __cplusplus */
|
| /* Initializes or reinitializes a buffer.
| * This function is sometimes called more than once on the same buffer,
| * such as during a yyrestart() or at EOF.
| */
| static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
|
| {
| int oerrno = errno;
|
| yy_flush_buffer(b );
|
| b->yy_input_file = file;
| b->yy_fill_buffer = 1;
|
| /* If b is the current buffer, then yy_init_buffer was _probably_
| * called from yyrestart() or through yy_get_next_buffer.
| * In that case, we don't want to reset the lineno or column.
| */
| if (b != YY_CURRENT_BUFFER){
| b->yy_bs_lineno = 1;
| b->yy_bs_column = 0;
| }
|
| b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
|
| errno = oerrno;
| }
|
| /** Discard all buffered characters. On the next scan, YY_INPUT will be called.
| * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
| *
| */
| void yy_flush_buffer (YY_BUFFER_STATE b )
| {
| if ( ! b )
| return;
|
| b->yy_n_chars = 0;
|
| /* We always need two end-of-buffer characters. The first causes
| * a transition to the end-of-buffer state. The second causes
| * a jam in that state.
| */
| b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
| b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
|
| b->yy_buf_pos = &b->yy_ch_buf[0];
|
| b->yy_at_bol = 1;
| b->yy_buffer_status = YY_BUFFER_NEW;
|
| if ( b == YY_CURRENT_BUFFER )
| yy_load_buffer_state( );
| }
|
| /** Pushes the new state onto the stack. The new state becomes
| * the current state. This function will allocate the stack
| * if necessary.
| * @param new_buffer The new state.
| *
| */
| void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
| {
| if (new_buffer == NULL)
| return;
|
| yyensure_buffer_stack();
|
| /* This block is copied from yy_switch_to_buffer. */
| if ( YY_CURRENT_BUFFER )
| {
| /* Flush out information for old buffer. */
| *(yy_c_buf_p) = (yy_hold_char);
| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| /* Only push if top exists. Otherwise, replace top. */
| if (YY_CURRENT_BUFFER)
| (yy_buffer_stack_top)++;
| YY_CURRENT_BUFFER_LVALUE = new_buffer;
|
| /* copied from yy_switch_to_buffer. */
| yy_load_buffer_state( );
| (yy_did_buffer_switch_on_eof) = 1;
| }
|
| /** Removes and deletes the top of the stack, if present.
| * The next element becomes the new top.
| *
| */
| void yypop_buffer_state (void)
| {
| if (!YY_CURRENT_BUFFER)
| return;
|
| yy_delete_buffer(YY_CURRENT_BUFFER );
| YY_CURRENT_BUFFER_LVALUE = NULL;
| if ((yy_buffer_stack_top) > 0)
| --(yy_buffer_stack_top);
|
| if (YY_CURRENT_BUFFER) {
| yy_load_buffer_state( );
| (yy_did_buffer_switch_on_eof) = 1;
| }
| }
|
| /* Allocates the stack if it does not exist.
| * Guarantees space for at least one push.
| */
| static void yyensure_buffer_stack (void)
| {
| int num_to_alloc;
|
| if (!(yy_buffer_stack)) {
|
| /* First allocation is just for 2 elements, since we don't know if this
| * scanner will even need a stack. We use 2 instead of 1 to avoid an
| * immediate realloc on the next call.
| */
| num_to_alloc = 1;
| (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
| (num_to_alloc * sizeof(struct yy_buffer_state*)
| );
| if ( ! (yy_buffer_stack) )
| YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
|
| memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
|
| (yy_buffer_stack_max) = num_to_alloc;
| (yy_buffer_stack_top) = 0;
| return;
| }
|
| if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
|
| /* Increase the buffer to prepare for a possible push. */
| int grow_size = 8 /* arbitrary grow size */;
|
| num_to_alloc = (yy_buffer_stack_max) + grow_size;
| (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
| ((yy_buffer_stack),
| num_to_alloc * sizeof(struct yy_buffer_state*)
| );
| if ( ! (yy_buffer_stack) )
| YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
|
| /* zero only the new slots.*/
| memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
| (yy_buffer_stack_max) = num_to_alloc;
| }
| }
|
| /** Setup the input buffer state to scan directly from a user-specified character buffer.
| * @param base the character buffer
| * @param size the size in bytes of the character buffer
| *
| * @return the newly allocated buffer state object.
| */
| YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
| {
| YY_BUFFER_STATE b;
|
| if ( size < 2 ||
| base[size-2] != YY_END_OF_BUFFER_CHAR ||
| base[size-1] != YY_END_OF_BUFFER_CHAR )
| /* They forgot to leave room for the EOB's. */
| return 0;
|
| b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
| if ( ! b )
| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
|
| b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
| b->yy_buf_pos = b->yy_ch_buf = base;
| b->yy_is_our_buffer = 0;
| b->yy_input_file = 0;
| b->yy_n_chars = b->yy_buf_size;
| b->yy_is_interactive = 0;
| b->yy_at_bol = 1;
| b->yy_fill_buffer = 0;
| b->yy_buffer_status = YY_BUFFER_NEW;
|
| yy_switch_to_buffer(b );
|
| return b;
| }
|
| /** Setup the input buffer state to scan a string. The next call to yylex() will
| * scan from a @e copy of @a str.
| * @param yystr a NUL-terminated string to scan
| *
| * @return the newly allocated buffer state object.
| * @note If you want to scan bytes that may contain NUL values, then use
| * yy_scan_bytes() instead.
| */
| YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
| {
|
| return yy_scan_bytes(yystr,strlen(yystr) );
| }
|
| /** Setup the input buffer state to scan the given bytes. The next call to yylex() will
| * scan from a @e copy of @a bytes.
| * @param bytes the byte buffer to scan
| * @param len the number of bytes in the buffer pointed to by @a bytes.
| *
| * @return the newly allocated buffer state object.
| */
| YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len )
| {
| YY_BUFFER_STATE b;
| char *buf;
| yy_size_t n;
| int i;
|
| /* Get memory for full buffer, including space for trailing EOB's. */
| n = _yybytes_len + 2;
| buf = (char *) yyalloc(n );
| if ( ! buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
|
| for ( i = 0; i < _yybytes_len; ++i )
| buf[i] = yybytes[i];
|
| buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
|
| b = yy_scan_buffer(buf,n );
| if ( ! b )
| YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
|
| /* It's okay to grow etc. this buffer, and we should throw it
| * away when we're done.
| */
| b->yy_is_our_buffer = 1;
|
| return b;
| }
|
| #ifndef YY_EXIT_FAILURE
| #define YY_EXIT_FAILURE 2
| #endif
|
| static void yy_fatal_error (yyconst char* msg )
| {
| (void) fprintf( stderr, "%s\n", msg );
| exit( YY_EXIT_FAILURE );
| }
|
| /* Redefine yyless() so it works in section 3 code. */
|
| #undef yyless
| #define yyless(n) \
| do \
| { \
| /* Undo effects of setting up yytext. */ \
| int yyless_macro_arg = (n); \
| YY_LESS_LINENO(yyless_macro_arg);\
| yytext[yyleng] = (yy_hold_char); \
| (yy_c_buf_p) = yytext + yyless_macro_arg; \
| (yy_hold_char) = *(yy_c_buf_p); \
| *(yy_c_buf_p) = '\0'; \
| yyleng = yyless_macro_arg; \
| } \
| while ( 0 )
|
| /* Accessor methods (get/set functions) to struct members. */
|
| /** Get the current line number.
| *
| */
| int yyget_lineno (void)
| {
|
| return yylineno;
| }
|
| /** Get the input stream.
| *
| */
| FILE *yyget_in (void)
| {
| return yyin;
| }
|
| /** Get the output stream.
| *
| */
| FILE *yyget_out (void)
| {
| return yyout;
| }
|
| /** Get the length of the current token.
| *
| */
| int yyget_leng (void)
| {
| return yyleng;
| }
|
| /** Get the current token.
| *
| */
|
| char *yyget_text (void)
| {
| return yytext;
| }
|
| /** Set the current line number.
| * @param line_number
| *
| */
| void yyset_lineno (int line_number )
| {
|
| yylineno = line_number;
| }
|
| /** Set the input stream. This does not discard the current
| * input buffer.
| * @param in_str A readable stream.
| *
| * @see yy_switch_to_buffer
| */
| void yyset_in (FILE * in_str )
| {
| yyin = in_str ;
| }
|
| void yyset_out (FILE * out_str )
| {
| yyout = out_str ;
| }
|
| int yyget_debug (void)
| {
| return yy_flex_debug;
| }
|
| void yyset_debug (int bdebug )
| {
| yy_flex_debug = bdebug ;
| }
|
| static int yy_init_globals (void)
| {
| /* Initialization is the same as for the non-reentrant scanner.
| * This function is called from yylex_destroy(), so don't allocate here.
| */
|
| (yy_buffer_stack) = 0;
| (yy_buffer_stack_top) = 0;
| (yy_buffer_stack_max) = 0;
| (yy_c_buf_p) = (char *) 0;
| (yy_init) = 0;
| (yy_start) = 0;
|
| (yy_state_buf) = 0;
| (yy_state_ptr) = 0;
| (yy_full_match) = 0;
| (yy_lp) = 0;
|
| /* Defined in main.c */
| #ifdef YY_STDINIT
| yyin = stdin;
| yyout = stdout;
| #else
| yyin = (FILE *) 0;
| yyout = (FILE *) 0;
| #endif
|
| /* For future reference: Set errno on error, since we are called by
| * yylex_init()
| */
| return 0;
| }
|
| /* yylex_destroy is for both reentrant and non-reentrant scanners. */
| int yylex_destroy (void)
| {
|
| /* Pop the buffer stack, destroying each element. */
| while(YY_CURRENT_BUFFER){
| yy_delete_buffer(YY_CURRENT_BUFFER );
| YY_CURRENT_BUFFER_LVALUE = NULL;
| yypop_buffer_state();
| }
|
| /* Destroy the stack itself. */
| yyfree((yy_buffer_stack) );
| (yy_buffer_stack) = NULL;
|
| yyfree ( (yy_state_buf) );
| (yy_state_buf) = NULL;
|
| /* Reset the globals. This is important in a non-reentrant scanner so the next time
| * yylex() is called, initialization will occur. */
| yy_init_globals( );
|
| return 0;
| }
|
| /*
| * Internal utility routines.
| */
|
| #ifndef yytext_ptr
| static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
| {
| register int i;
| for ( i = 0; i < n; ++i )
| s1[i] = s2[i];
| }
| #endif
|
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen (yyconst char * s )
| {
| register int n;
| for ( n = 0; s[n]; ++n )
| ;
|
| return n;
| }
| #endif
|
| void *yyalloc (yy_size_t size )
| {
| return (void *) malloc( size );
| }
|
| void *yyrealloc (void * ptr, yy_size_t size )
| {
| /* The cast to (char *) in the following accommodates both
| * implementations that use char* generic pointers, and those
| * that use void* generic pointers. It works with the latter
| * because both ANSI C and C++ allow castless assignment from
| * any pointer type to void*, and deal with argument conversions
| * as though doing an assignment.
| */
| return (void *) realloc( (char *) ptr, size );
| }
|
| void yyfree (void * ptr )
| {
| free( (char *) ptr ); /* see yyrealloc() for (char *) cast */
| }
|
| #define YYTABLES_NAME "yytables"
|
| #line 9 "conftest.l"
|
|
| #ifdef YYTEXT_POINTER
| extern char *yytext;
| #endif
| int
| main (void)
| {
| return ! yylex () + ! yywrap ();
| }
configure:19990: g++ -o conftest -g -O2 conftest.cpp -ll >&5
conftest.l: In function 'int yylex()':
conftest.l:6: error: 'input' was not declared in this scope
configure:19997: $? = 1
configure: failed program was:
|
| #line 3 "lex.yy.c"
|
| #define YY_INT_ALIGNED short int
|
| /* A lexical scanner generated by flex */
|
| #define FLEX_SCANNER
| #define YY_FLEX_MAJOR_VERSION 2
| #define YY_FLEX_MINOR_VERSION 5
| #define YY_FLEX_SUBMINOR_VERSION 35
| #if YY_FLEX_SUBMINOR_VERSION > 0
| #define FLEX_BETA
| #endif
|
| /* First, we deal with platform-specific or compiler-specific issues. */
|
| /* begin standard C headers. */
| #include <stdio.h>
| #include <string.h>
| #include <errno.h>
| #include <stdlib.h>
|
| /* end standard C headers. */
|
| /* flex integer type definitions */
|
| #ifndef FLEXINT_H
| #define FLEXINT_H
|
| /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
|
| #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
|
| /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
| * if you want the limit (max/min) macros for int types.
| */
| #ifndef __STDC_LIMIT_MACROS
| #define __STDC_LIMIT_MACROS 1
| #endif
|
| #include <inttypes.h>
| typedef int8_t flex_int8_t;
| typedef uint8_t flex_uint8_t;
| typedef int16_t flex_int16_t;
| typedef uint16_t flex_uint16_t;
| typedef int32_t flex_int32_t;
| typedef uint32_t flex_uint32_t;
| #else
| typedef signed char flex_int8_t;
| typedef short int flex_int16_t;
| typedef int flex_int32_t;
| typedef unsigned char flex_uint8_t;
| typedef unsigned short int flex_uint16_t;
| typedef unsigned int flex_uint32_t;
| #endif /* ! C99 */
|
| /* Limits of integral types. */
| #ifndef INT8_MIN
| #define INT8_MIN (-128)
| #endif
| #ifndef INT16_MIN
| #define INT16_MIN (-32767-1)
| #endif
| #ifndef INT32_MIN
| #define INT32_MIN (-2147483647-1)
| #endif
| #ifndef INT8_MAX
| #define INT8_MAX (127)
| #endif
| #ifndef INT16_MAX
| #define INT16_MAX (32767)
| #endif
| #ifndef INT32_MAX
| #define INT32_MAX (2147483647)
| #endif
| #ifndef UINT8_MAX
| #define UINT8_MAX (255U)
| #endif
| #ifndef UINT16_MAX
| #define UINT16_MAX (65535U)
| #endif
| #ifndef UINT32_MAX
| #define UINT32_MAX (4294967295U)
| #endif
|
| #endif /* ! FLEXINT_H */
|
| #ifdef __cplusplus
|
| /* The "const" storage-class-modifier is valid. */
| #define YY_USE_CONST
|
| #else /* ! __cplusplus */
|
| /* C99 requires __STDC__ to be defined as 1. */
| #if defined (__STDC__)
|
| #define YY_USE_CONST
|
| #endif /* defined (__STDC__) */
| #endif /* ! __cplusplus */
|
| #ifdef YY_USE_CONST
| #define yyconst const
| #else
| #define yyconst
| #endif
|
| /* Returned upon end-of-file. */
| #define YY_NULL 0
|
| /* Promotes a possibly negative, possibly signed char to an unsigned
| * integer for use as an array index. If the signed char is negative,
| * we want to instead treat it as an 8-bit unsigned char, hence the
| * double cast.
| */
| #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
|
| /* Enter a start condition. This macro really ought to take a parameter,
| * but we do it the disgusting crufty way forced on us by the ()-less
| * definition of BEGIN.
| */
| #define BEGIN (yy_start) = 1 + 2 *
|
| /* Translate the current start state into a value that can be later handed
| * to BEGIN to return to the state. The YYSTATE alias is for lex
| * compatibility.
| */
| #define YY_START (((yy_start) - 1) / 2)
| #define YYSTATE YY_START
|
| /* Action number for EOF rule of a given start state. */
| #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
|
| /* Special action meaning "start processing a new file". */
| #define YY_NEW_FILE yyrestart(yyin )
|
| #define YY_END_OF_BUFFER_CHAR 0
|
| /* Size of default input buffer. */
| #ifndef YY_BUF_SIZE
| #define YY_BUF_SIZE 16384
| #endif
|
| /* The state buf must be large enough to hold one state per character in the main buffer.
| */
| #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
|
| #ifndef YY_TYPEDEF_YY_BUFFER_STATE
| #define YY_TYPEDEF_YY_BUFFER_STATE
| typedef struct yy_buffer_state *YY_BUFFER_STATE;
| #endif
|
| extern int yyleng;
|
| extern FILE *yyin, *yyout;
|
| #define EOB_ACT_CONTINUE_SCAN 0
| #define EOB_ACT_END_OF_FILE 1
| #define EOB_ACT_LAST_MATCH 2
|
| #define YY_LESS_LINENO(n)
|
| /* Return all but the first "n" matched characters back to the input stream. */
| #define yyless(n) \
| do \
| { \
| /* Undo effects of setting up yytext. */ \
| int yyless_macro_arg = (n); \
| YY_LESS_LINENO(yyless_macro_arg);\
| *yy_cp = (yy_hold_char); \
| YY_RESTORE_YY_MORE_OFFSET \
| (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
| YY_DO_BEFORE_ACTION; /* set up yytext again */ \
| } \
| while ( 0 )
|
| #define unput(c) yyunput( c, (yytext_ptr) )
|
| #ifndef YY_TYPEDEF_YY_SIZE_T
| #define YY_TYPEDEF_YY_SIZE_T
| typedef size_t yy_size_t;
| #endif
|
| #ifndef YY_STRUCT_YY_BUFFER_STATE
| #define YY_STRUCT_YY_BUFFER_STATE
| struct yy_buffer_state
| {
| FILE *yy_input_file;
|
| char *yy_ch_buf; /* input buffer */
| char *yy_buf_pos; /* current position in input buffer */
|
| /* Size of input buffer in bytes, not including room for EOB
| * characters.
| */
| yy_size_t yy_buf_size;
|
| /* Number of characters read into yy_ch_buf, not including EOB
| * characters.
| */
| int yy_n_chars;
|
| /* Whether we "own" the buffer - i.e., we know we created it,
| * and can realloc() it to grow it, and should free() it to
| * delete it.
| */
| int yy_is_our_buffer;
|
| /* Whether this is an "interactive" input source; if so, and
| * if we're using stdio for input, then we want to use getc()
| * instead of fread(), to make sure we stop fetching input after
| * each newline.
| */
| int yy_is_interactive;
|
| /* Whether we're considered to be at the beginning of a line.
| * If so, '^' rules will be active on the next match, otherwise
| * not.
| */
| int yy_at_bol;
|
| int yy_bs_lineno; /**< The line count. */
| int yy_bs_column; /**< The column count. */
|
| /* Whether to try to fill the input buffer when we reach the
| * end of it.
| */
| int yy_fill_buffer;
|
| int yy_buffer_status;
|
| #define YY_BUFFER_NEW 0
| #define YY_BUFFER_NORMAL 1
| /* When an EOF's been seen but there's still some text to process
| * then we mark the buffer as YY_EOF_PENDING, to indicate that we
| * shouldn't try reading from the input source any more. We might
| * still have a bunch of tokens to match, though, because of
| * possible backing-up.
| *
| * When we actually see the EOF, we change the status to "new"
| * (via yyrestart()), so that the user can continue scanning by
| * just pointing yyin at a new input file.
| */
| #define YY_BUFFER_EOF_PENDING 2
|
| };
| #endif /* !YY_STRUCT_YY_BUFFER_STATE */
|
| /* Stack of input buffers. */
| static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
| static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
| static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
|
| /* We provide macros for accessing buffer states in case in the
| * future we want to put the buffer states in a more general
| * "scanner state".
| *
| * Returns the top of the stack, or NULL.
| */
| #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
| ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
| : NULL)
|
| /* Same as previous macro, but useful when we know that the buffer stack is not
| * NULL or when we need an lvalue. For internal use only.
| */
| #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
|
| /* yy_hold_char holds the character lost when yytext is formed. */
| static char yy_hold_char;
| static int yy_n_chars; /* number of characters read into yy_ch_buf */
| int yyleng;
|
| /* Points to current character in buffer. */
| static char *yy_c_buf_p = (char *) 0;
| static int yy_init = 0; /* whether we need to initialize */
| static int yy_start = 0; /* start state number */
|
| /* Flag which is used to allow yywrap()'s to do buffer switches
| * instead of setting up a fresh yyin. A bit of a hack ...
| */
| static int yy_did_buffer_switch_on_eof;
|
| void yyrestart (FILE *input_file );
| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer );
| YY_BUFFER_STATE yy_create_buffer (FILE *file,int size );
| void yy_delete_buffer (YY_BUFFER_STATE b );
| void yy_flush_buffer (YY_BUFFER_STATE b );
| void yypush_buffer_state (YY_BUFFER_STATE new_buffer );
| void yypop_buffer_state (void );
|
| static void yyensure_buffer_stack (void );
| static void yy_load_buffer_state (void );
| static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file );
|
| #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
|
| YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size );
| YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str );
| YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len );
|
| void *yyalloc (yy_size_t );
| void *yyrealloc (void *,yy_size_t );
| void yyfree (void * );
|
| #define yy_new_buffer yy_create_buffer
|
| #define yy_set_interactive(is_interactive) \
| { \
| if ( ! YY_CURRENT_BUFFER ){ \
| yyensure_buffer_stack (); \
| YY_CURRENT_BUFFER_LVALUE = \
| yy_create_buffer(yyin,YY_BUF_SIZE ); \
| } \
| YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
| }
|
| #define yy_set_bol(at_bol) \
| { \
| if ( ! YY_CURRENT_BUFFER ){\
| yyensure_buffer_stack (); \
| YY_CURRENT_BUFFER_LVALUE = \
| yy_create_buffer(yyin,YY_BUF_SIZE ); \
| } \
| YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
| }
|
| #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
|
| /* Begin user sect3 */
|
| typedef unsigned char YY_CHAR;
|
| FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
|
| typedef int yy_state_type;
|
| extern int yylineno;
|
| int yylineno = 1;
|
| extern char *yytext;
| #define yytext_ptr yytext
|
| static yy_state_type yy_get_previous_state (void );
| static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
| static int yy_get_next_buffer (void );
| static void yy_fatal_error (yyconst char msg[] );
|
| /* Done after the current pattern has been matched and before the
| * corresponding action - sets up yytext.
| */
| #define YY_DO_BEFORE_ACTION \
| (yytext_ptr) = yy_bp; \
| (yytext_ptr) -= (yy_more_len); \
| yyleng = (size_t) (yy_cp - (yytext_ptr)); \
| (yy_hold_char) = *yy_cp; \
| *yy_cp = '\0'; \
| (yy_c_buf_p) = yy_cp;
|
| #define YY_NUM_RULES 8
| #define YY_END_OF_BUFFER 9
| /* This struct is not used in this scanner,
| but its presence is necessary. */
| struct yy_trans_info
| {
| flex_int32_t yy_verify;
| flex_int32_t yy_nxt;
| };
| static yyconst flex_int16_t yy_acclist[23] =
| { 0,
| 9, 7, 8, 8, 1, 7, 8, 2, 7, 8,
| 3, 7, 8, 4, 7, 8, 5, 7, 8, 6,
| 7, 8
| } ;
|
| static yyconst flex_int16_t yy_accept[14] =
| { 0,
| 1, 1, 1, 2, 4, 5, 8, 11, 14, 17,
| 20, 23, 23
| } ;
|
| static yyconst flex_int32_t yy_ec[256] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 2,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 3, 4, 5, 6,
|
| 7, 8, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
|
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1
| } ;
|
| static yyconst flex_int32_t yy_meta[9] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1
| } ;
|
| static yyconst flex_int16_t yy_base[13] =
| { 0,
| 0, 0, 9, 10, 10, 10, 10, 10, 10, 10,
| 10, 10
| } ;
|
| static yyconst flex_int16_t yy_def[13] =
| { 0,
| 12, 1, 12, 12, 12, 12, 12, 12, 12, 12,
| 12, 0
| } ;
|
| static yyconst flex_int16_t yy_nxt[19] =
| { 0,
| 4, 5, 6, 7, 8, 9, 10, 11, 12, 3,
| 12, 12, 12, 12, 12, 12, 12, 12
| } ;
|
| static yyconst flex_int16_t yy_chk[19] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1, 3, 12,
| 12, 12, 12, 12, 12, 12, 12, 12
| } ;
|
| extern int yy_flex_debug;
| int yy_flex_debug = 0;
|
| static yy_state_type *yy_state_buf=0, *yy_state_ptr=0;
| static char *yy_full_match;
| static int yy_lp;
| #define REJECT \
| { \
| *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \
| yy_cp = (yy_full_match); /* restore poss. backed-over text */ \
| ++(yy_lp); \
| goto find_rule; \
| }
|
| static int yy_more_flag = 0;
| static int yy_more_len = 0;
| #define yymore() ((yy_more_flag) = 1)
| #define YY_MORE_ADJ (yy_more_len)
| #define YY_RESTORE_YY_MORE_OFFSET
| char *yytext;
| #line 1 "conftest.l"
| #line 468 "lex.yy.c"
|
| #define INITIAL 0
|
| #ifndef YY_NO_UNISTD_H
| /* Special case for "unistd.h", since it is non-ANSI. We include it way
| * down here because we want the user's section 1 to have been scanned first.
| * The user has a chance to override it with an option.
| */
| #include <unistd.h>
| #endif
|
| #ifndef YY_EXTRA_TYPE
| #define YY_EXTRA_TYPE void *
| #endif
|
| static int yy_init_globals (void );
|
| /* Accessor methods to globals.
| These are made visible to non-reentrant scanners for convenience. */
|
| int yylex_destroy (void );
|
| int yyget_debug (void );
|
| void yyset_debug (int debug_flag );
|
| YY_EXTRA_TYPE yyget_extra (void );
|
| void yyset_extra (YY_EXTRA_TYPE user_defined );
|
| FILE *yyget_in (void );
|
| void yyset_in (FILE * in_str );
|
| FILE *yyget_out (void );
|
| void yyset_out (FILE * out_str );
|
| int yyget_leng (void );
|
| char *yyget_text (void );
|
| int yyget_lineno (void );
|
| void yyset_lineno (int line_number );
|
| /* Macros after this point can all be overridden by user definitions in
| * section 1.
| */
|
| #ifndef YY_SKIP_YYWRAP
| #ifdef __cplusplus
| extern "C" int yywrap (void );
| #else
| extern int yywrap (void );
| #endif
| #endif
|
| static void yyunput (int c,char *buf_ptr );
|
| #ifndef yytext_ptr
| static void yy_flex_strncpy (char *,yyconst char *,int );
| #endif
|
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen (yyconst char * );
| #endif
|
| #ifndef YY_NO_INPUT
|
| #ifdef __cplusplus
| static int yyinput (void );
| #else
| static int input (void );
| #endif
|
| #endif
|
| /* Amount of stuff to slurp up with each read. */
| #ifndef YY_READ_BUF_SIZE
| #define YY_READ_BUF_SIZE 8192
| #endif
|
| /* Copy whatever the last rule matched to the standard output. */
| #ifndef ECHO
| /* This used to be an fputs(), but since the string might contain NUL's,
| * we now use fwrite().
| */
| #define ECHO fwrite( yytext, yyleng, 1, yyout )
| #endif
|
| /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
| * is returned in "result".
| */
| #ifndef YY_INPUT
| #define YY_INPUT(buf,result,max_size) \
| if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
| { \
| int c = '*'; \
| int n; \
| for ( n = 0; n < max_size && \
| (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
| buf[n] = (char) c; \
| if ( c == '\n' ) \
| buf[n++] = (char) c; \
| if ( c == EOF && ferror( yyin ) ) \
| YY_FATAL_ERROR( "input in flex scanner failed" ); \
| result = n; \
| } \
| else \
| { \
| errno=0; \
| while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
| { \
| if( errno != EINTR) \
| { \
| YY_FATAL_ERROR( "input in flex scanner failed" ); \
| break; \
| } \
| errno=0; \
| clearerr(yyin); \
| } \
| }\
| \
|
| #endif
|
| /* No semi-colon after return; correct usage is to write "yyterminate();" -
| * we don't want an extra ';' after the "return" because that will cause
| * some compilers to complain about unreachable statements.
| */
| #ifndef yyterminate
| #define yyterminate() return YY_NULL
| #endif
|
| /* Number of entries by which start-condition stack grows. */
| #ifndef YY_START_STACK_INCR
| #define YY_START_STACK_INCR 25
| #endif
|
| /* Report a fatal error. */
| #ifndef YY_FATAL_ERROR
| #define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
| #endif
|
| /* end tables serialization structures and prototypes */
|
| /* Default declaration of generated scanner - a define so the user can
| * easily add parameters.
| */
| #ifndef YY_DECL
| #define YY_DECL_IS_OURS 1
|
| extern int yylex (void);
|
| #define YY_DECL int yylex (void)
| #endif /* !YY_DECL */
|
| /* Code executed at the beginning of each rule, after yytext and yyleng
| * have been set up.
| */
| #ifndef YY_USER_ACTION
| #define YY_USER_ACTION
| #endif
|
| /* Code executed at the end of each rule. */
| #ifndef YY_BREAK
| #define YY_BREAK break;
| #endif
|
| #define YY_RULE_SETUP \
| YY_USER_ACTION
|
| /** The main scanner function which does all the work.
| */
| YY_DECL
| {
| register yy_state_type yy_current_state;
| register char *yy_cp, *yy_bp;
| register int yy_act;
|
| #line 1 "conftest.l"
|
| #line 652 "lex.yy.c"
|
| if ( !(yy_init) )
| {
| (yy_init) = 1;
|
| #ifdef YY_USER_INIT
| YY_USER_INIT;
| #endif
|
| /* Create the reject buffer large enough to save one state per allowed character. */
| if ( ! (yy_state_buf) )
| (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE );
| if ( ! (yy_state_buf) )
| YY_FATAL_ERROR( "out of dynamic memory in yylex()" );
|
| if ( ! (yy_start) )
| (yy_start) = 1; /* first start state */
|
| if ( ! yyin )
| yyin = stdin;
|
| if ( ! yyout )
| yyout = stdout;
|
| if ( ! YY_CURRENT_BUFFER ) {
| yyensure_buffer_stack ();
| YY_CURRENT_BUFFER_LVALUE =
| yy_create_buffer(yyin,YY_BUF_SIZE );
| }
|
| yy_load_buffer_state( );
| }
|
| while ( 1 ) /* loops until end-of-file is reached */
| {
| (yy_more_len) = 0;
| if ( (yy_more_flag) )
| {
| (yy_more_len) = (yy_c_buf_p) - (yytext_ptr);
| (yy_more_flag) = 0;
| }
| yy_cp = (yy_c_buf_p);
|
| /* Support of yytext. */
| *yy_cp = (yy_hold_char);
|
| /* yy_bp points to the position in yy_ch_buf of the start of
| * the current run.
| */
| yy_bp = yy_cp;
|
| yy_current_state = (yy_start);
|
| (yy_state_ptr) = (yy_state_buf);
| *(yy_state_ptr)++ = yy_current_state;
|
| yy_match:
| do
| {
| register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| *(yy_state_ptr)++ = yy_current_state;
| ++yy_cp;
| }
| while ( yy_base[yy_current_state] != 10 );
|
| yy_find_action:
| yy_current_state = *--(yy_state_ptr);
| (yy_lp) = yy_accept[yy_current_state];
| find_rule: /* we branch to this label when backing up */
| for ( ; ; ) /* until we find what rule we matched */
| {
| if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] )
| {
| yy_act = yy_acclist[(yy_lp)];
| {
| (yy_full_match) = yy_cp;
| break;
| }
| }
| --yy_cp;
| yy_current_state = *--(yy_state_ptr);
| (yy_lp) = yy_accept[yy_current_state];
| }
|
| YY_DO_BEFORE_ACTION;
|
| do_action: /* This label is used only to access EOF actions. */
|
| switch ( yy_act )
| { /* beginning of action switch */
| case 1:
| YY_RULE_SETUP
| #line 2 "conftest.l"
| { ECHO; }
| YY_BREAK
| case 2:
| YY_RULE_SETUP
| #line 3 "conftest.l"
| { REJECT; }
| YY_BREAK
| case 3:
| YY_RULE_SETUP
| #line 4 "conftest.l"
| { yymore (); }
| YY_BREAK
| case 4:
| YY_RULE_SETUP
| #line 5 "conftest.l"
| { yyless (1); }
| YY_BREAK
| case 5:
| YY_RULE_SETUP
| #line 6 "conftest.l"
| { yyless (input () != 0); }
| YY_BREAK
| case 6:
| YY_RULE_SETUP
| #line 7 "conftest.l"
| { unput (yytext[0]); }
| YY_BREAK
| case 7:
| YY_RULE_SETUP
| #line 8 "conftest.l"
| { BEGIN INITIAL; }
| YY_BREAK
| case 8:
| YY_RULE_SETUP
| #line 9 "conftest.l"
| ECHO;
| YY_BREAK
| #line 790 "lex.yy.c"
| case YY_STATE_EOF(INITIAL):
| yyterminate();
|
| case YY_END_OF_BUFFER:
| {
| /* Amount of text matched not including the EOB char. */
| int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
|
| /* Undo the effects of YY_DO_BEFORE_ACTION. */
| *yy_cp = (yy_hold_char);
| YY_RESTORE_YY_MORE_OFFSET
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
| {
| /* We're scanning a new file or input source. It's
| * possible that this happened because the user
| * just pointed yyin at a new source and called
| * yylex(). If so, then we have to assure
| * consistency between YY_CURRENT_BUFFER and our
| * globals. Here is the right place to do so, because
| * this is the first action (other than possibly a
| * back-up) that will match for the new input source.
| */
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
| YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
| }
|
| /* Note that here we test for yy_c_buf_p "<=" to the position
| * of the first EOB in the buffer, since yy_c_buf_p will
| * already have been incremented past the NUL character
| * (since all states make transitions on EOB to the
| * end-of-buffer state). Contrast this with the test
| * in input().
| */
| if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
| { /* This was really a NUL. */
| yy_state_type yy_next_state;
|
| (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
|
| yy_current_state = yy_get_previous_state( );
|
| /* Okay, we're now positioned to make the NUL
| * transition. We couldn't have
| * yy_get_previous_state() go ahead and do it
| * for us because it doesn't know how to deal
| * with the possibility of jamming (and we don't
| * want to build jamming into it because then it
| * will run more slowly).
| */
|
| yy_next_state = yy_try_NUL_trans( yy_current_state );
|
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
|
| if ( yy_next_state )
| {
| /* Consume the NUL. */
| yy_cp = ++(yy_c_buf_p);
| yy_current_state = yy_next_state;
| goto yy_match;
| }
|
| else
| {
| yy_cp = (yy_c_buf_p);
| goto yy_find_action;
| }
| }
|
| else switch ( yy_get_next_buffer( ) )
| {
| case EOB_ACT_END_OF_FILE:
| {
| (yy_did_buffer_switch_on_eof) = 0;
|
| if ( yywrap( ) )
| {
| /* Note: because we've taken care in
| * yy_get_next_buffer() to have set up
| * yytext, we can now set up
| * yy_c_buf_p so that if some total
| * hoser (like flex itself) wants to
| * call the scanner after we return the
| * YY_NULL, it'll still work - another
| * YY_NULL will get returned.
| */
| (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
|
| yy_act = YY_STATE_EOF(YY_START);
| goto do_action;
| }
|
| else
| {
| if ( ! (yy_did_buffer_switch_on_eof) )
| YY_NEW_FILE;
| }
| break;
| }
|
| case EOB_ACT_CONTINUE_SCAN:
| (yy_c_buf_p) =
| (yytext_ptr) + yy_amount_of_matched_text;
|
| yy_current_state = yy_get_previous_state( );
|
| yy_cp = (yy_c_buf_p);
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| goto yy_match;
|
| case EOB_ACT_LAST_MATCH:
| (yy_c_buf_p) =
| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
|
| yy_current_state = yy_get_previous_state( );
|
| yy_cp = (yy_c_buf_p);
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| goto yy_find_action;
| }
| break;
| }
|
| default:
| YY_FATAL_ERROR(
| "fatal flex scanner internal error--no action found" );
| } /* end of action switch */
| } /* end of scanning one token */
| } /* end of yylex */
|
| /* yy_get_next_buffer - try to read in a new buffer
| *
| * Returns a code representing an action:
| * EOB_ACT_LAST_MATCH -
| * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
| * EOB_ACT_END_OF_FILE - end of file
| */
| static int yy_get_next_buffer (void)
| {
| register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
| register char *source = (yytext_ptr);
| register int number_to_move, i;
| int ret_val;
|
| if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
| YY_FATAL_ERROR(
| "fatal flex scanner internal error--end of buffer missed" );
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
| { /* Don't try to fill the buffer, so this is an EOF. */
| if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
| {
| /* We matched a single character, the EOB, so
| * treat this as a final EOF.
| */
| return EOB_ACT_END_OF_FILE;
| }
|
| else
| {
| /* We matched some text prior to the EOB, first
| * process it.
| */
| return EOB_ACT_LAST_MATCH;
| }
| }
|
| /* Try to read more data. */
|
| /* First move last chars to start of buffer. */
| number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
|
| for ( i = 0; i < number_to_move; ++i )
| *(dest++) = *(source++);
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
| /* don't do the read, it's not guaranteed to return an EOF,
| * just force an EOF
| */
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
|
| else
| {
| int num_to_read =
| YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
|
| while ( num_to_read <= 0 )
| { /* Not enough room in the buffer - grow it. */
|
| YY_FATAL_ERROR(
| "input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
|
| }
|
| if ( num_to_read > YY_READ_BUF_SIZE )
| num_to_read = YY_READ_BUF_SIZE;
|
| /* Read in more data. */
| YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
| (yy_n_chars), (size_t) num_to_read );
|
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| if ( (yy_n_chars) == 0 )
| {
| if ( number_to_move == YY_MORE_ADJ )
| {
| ret_val = EOB_ACT_END_OF_FILE;
| yyrestart(yyin );
| }
|
| else
| {
| ret_val = EOB_ACT_LAST_MATCH;
| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
| YY_BUFFER_EOF_PENDING;
| }
| }
|
| else
| ret_val = EOB_ACT_CONTINUE_SCAN;
|
| if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
| /* Extend the array by 50%, plus the number we really need. */
| yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
| if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
| }
|
| (yy_n_chars) += number_to_move;
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
|
| (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
|
| return ret_val;
| }
|
| /* yy_get_previous_state - get the state just before the EOB char was reached */
|
| static yy_state_type yy_get_previous_state (void)
| {
| register yy_state_type yy_current_state;
| register char *yy_cp;
|
| yy_current_state = (yy_start);
|
| (yy_state_ptr) = (yy_state_buf);
| *(yy_state_ptr)++ = yy_current_state;
|
| for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
| {
| register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| *(yy_state_ptr)++ = yy_current_state;
| }
|
| return yy_current_state;
| }
|
| /* yy_try_NUL_trans - try to make a transition on the NUL character
| *
| * synopsis
| * next_state = yy_try_NUL_trans( current_state );
| */
| static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
| {
| register int yy_is_jam;
|
| register YY_CHAR yy_c = 1;
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| yy_is_jam = (yy_current_state == 12);
| if ( ! yy_is_jam )
| *(yy_state_ptr)++ = yy_current_state;
|
| return yy_is_jam ? 0 : yy_current_state;
| }
|
| static void yyunput (int c, register char * yy_bp )
| {
| register char *yy_cp;
|
| yy_cp = (yy_c_buf_p);
|
| /* undo effects of setting up yytext */
| *yy_cp = (yy_hold_char);
|
| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
| { /* need to shift things up to make room */
| /* +2 for EOB chars. */
| register int number_to_move = (yy_n_chars) + 2;
| register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
| YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
| register char *source =
| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
|
| while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
| *--dest = *--source;
|
| yy_cp += (int) (dest - source);
| yy_bp += (int) (dest - source);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
|
| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
| YY_FATAL_ERROR( "flex scanner push-back overflow" );
| }
|
| *--yy_cp = (char) c;
|
| (yytext_ptr) = yy_bp;
| (yy_hold_char) = *yy_cp;
| (yy_c_buf_p) = yy_cp;
| }
|
| #ifndef YY_NO_INPUT
| #ifdef __cplusplus
| static int yyinput (void)
| #else
| static int input (void)
| #endif
|
| {
| int c;
|
| *(yy_c_buf_p) = (yy_hold_char);
|
| if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
| {
| /* yy_c_buf_p now points to the character we want to return.
| * If this occurs *before* the EOB characters, then it's a
| * valid NUL; if not, then we've hit the end of the buffer.
| */
| if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
| /* This was really a NUL. */
| *(yy_c_buf_p) = '\0';
|
| else
| { /* need more input */
| int offset = (yy_c_buf_p) - (yytext_ptr);
| ++(yy_c_buf_p);
|
| switch ( yy_get_next_buffer( ) )
| {
| case EOB_ACT_LAST_MATCH:
| /* This happens because yy_g_n_b()
| * sees that we've accumulated a
| * token and flags that we need to
| * try matching the token before
| * proceeding. But for input(),
| * there's no matching to consider.
| * So convert the EOB_ACT_LAST_MATCH
| * to EOB_ACT_END_OF_FILE.
| */
|
| /* Reset buffer status. */
| yyrestart(yyin );
|
| /*FALLTHROUGH*/
|
| case EOB_ACT_END_OF_FILE:
| {
| if ( yywrap( ) )
| return EOF;
|
| if ( ! (yy_did_buffer_switch_on_eof) )
| YY_NEW_FILE;
| #ifdef __cplusplus
| return yyinput();
| #else
| return input();
| #endif
| }
|
| case EOB_ACT_CONTINUE_SCAN:
| (yy_c_buf_p) = (yytext_ptr) + offset;
| break;
| }
| }
| }
|
| c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
| *(yy_c_buf_p) = '\0'; /* preserve yytext */
| (yy_hold_char) = *++(yy_c_buf_p);
|
| return c;
| }
| #endif /* ifndef YY_NO_INPUT */
|
| /** Immediately switch to a different input stream.
| * @param input_file A readable stream.
| *
| * @note This function does not reset the start condition to @c INITIAL .
| */
| void yyrestart (FILE * input_file )
| {
|
| if ( ! YY_CURRENT_BUFFER ){
| yyensure_buffer_stack ();
| YY_CURRENT_BUFFER_LVALUE =
| yy_create_buffer(yyin,YY_BUF_SIZE );
| }
|
| yy_init_buffer(YY_CURRENT_BUFFER,input_file );
| yy_load_buffer_state( );
| }
|
| /** Switch to a different input buffer.
| * @param new_buffer The new input buffer.
| *
| */
| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
| {
|
| /* TODO. We should be able to replace this entire function body
| * with
| * yypop_buffer_state();
| * yypush_buffer_state(new_buffer);
| */
| yyensure_buffer_stack ();
| if ( YY_CURRENT_BUFFER == new_buffer )
| return;
|
| if ( YY_CURRENT_BUFFER )
| {
| /* Flush out information for old buffer. */
| *(yy_c_buf_p) = (yy_hold_char);
| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| YY_CURRENT_BUFFER_LVALUE = new_buffer;
| yy_load_buffer_state( );
|
| /* We don't actually know whether we did this switch during
| * EOF (yywrap()) processing, but the only time this flag
| * is looked at is after yywrap() is called, so it's safe
| * to go ahead and always set it.
| */
| (yy_did_buffer_switch_on_eof) = 1;
| }
|
| static void yy_load_buffer_state (void)
| {
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
| (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
| yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
| (yy_hold_char) = *(yy_c_buf_p);
| }
|
| /** Allocate and initialize an input buffer state.
| * @param file A readable stream.
| * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
| *
| * @return the allocated buffer state.
| */
| YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
| {
| YY_BUFFER_STATE b;
|
| b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
| if ( ! b )
| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
|
| b->yy_buf_size = size;
|
| /* yy_ch_buf has to be 2 characters longer than the size given because
| * we need to put in 2 end-of-buffer characters.
| */
| b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 );
| if ( ! b->yy_ch_buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
|
| b->yy_is_our_buffer = 1;
|
| yy_init_buffer(b,file );
|
| return b;
| }
|
| /** Destroy the buffer.
| * @param b a buffer created with yy_create_buffer()
| *
| */
| void yy_delete_buffer (YY_BUFFER_STATE b )
| {
|
| if ( ! b )
| return;
|
| if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
| YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
|
| if ( b->yy_is_our_buffer )
| yyfree((void *) b->yy_ch_buf );
|
| yyfree((void *) b );
| }
|
| #ifndef __cplusplus
| extern int isatty (int );
| #endif /* __cplusplus */
|
| /* Initializes or reinitializes a buffer.
| * This function is sometimes called more than once on the same buffer,
| * such as during a yyrestart() or at EOF.
| */
| static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
|
| {
| int oerrno = errno;
|
| yy_flush_buffer(b );
|
| b->yy_input_file = file;
| b->yy_fill_buffer = 1;
|
| /* If b is the current buffer, then yy_init_buffer was _probably_
| * called from yyrestart() or through yy_get_next_buffer.
| * In that case, we don't want to reset the lineno or column.
| */
| if (b != YY_CURRENT_BUFFER){
| b->yy_bs_lineno = 1;
| b->yy_bs_column = 0;
| }
|
| b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
|
| errno = oerrno;
| }
|
| /** Discard all buffered characters. On the next scan, YY_INPUT will be called.
| * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
| *
| */
| void yy_flush_buffer (YY_BUFFER_STATE b )
| {
| if ( ! b )
| return;
|
| b->yy_n_chars = 0;
|
| /* We always need two end-of-buffer characters. The first causes
| * a transition to the end-of-buffer state. The second causes
| * a jam in that state.
| */
| b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
| b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
|
| b->yy_buf_pos = &b->yy_ch_buf[0];
|
| b->yy_at_bol = 1;
| b->yy_buffer_status = YY_BUFFER_NEW;
|
| if ( b == YY_CURRENT_BUFFER )
| yy_load_buffer_state( );
| }
|
| /** Pushes the new state onto the stack. The new state becomes
| * the current state. This function will allocate the stack
| * if necessary.
| * @param new_buffer The new state.
| *
| */
| void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
| {
| if (new_buffer == NULL)
| return;
|
| yyensure_buffer_stack();
|
| /* This block is copied from yy_switch_to_buffer. */
| if ( YY_CURRENT_BUFFER )
| {
| /* Flush out information for old buffer. */
| *(yy_c_buf_p) = (yy_hold_char);
| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| /* Only push if top exists. Otherwise, replace top. */
| if (YY_CURRENT_BUFFER)
| (yy_buffer_stack_top)++;
| YY_CURRENT_BUFFER_LVALUE = new_buffer;
|
| /* copied from yy_switch_to_buffer. */
| yy_load_buffer_state( );
| (yy_did_buffer_switch_on_eof) = 1;
| }
|
| /** Removes and deletes the top of the stack, if present.
| * The next element becomes the new top.
| *
| */
| void yypop_buffer_state (void)
| {
| if (!YY_CURRENT_BUFFER)
| return;
|
| yy_delete_buffer(YY_CURRENT_BUFFER );
| YY_CURRENT_BUFFER_LVALUE = NULL;
| if ((yy_buffer_stack_top) > 0)
| --(yy_buffer_stack_top);
|
| if (YY_CURRENT_BUFFER) {
| yy_load_buffer_state( );
| (yy_did_buffer_switch_on_eof) = 1;
| }
| }
|
| /* Allocates the stack if it does not exist.
| * Guarantees space for at least one push.
| */
| static void yyensure_buffer_stack (void)
| {
| int num_to_alloc;
|
| if (!(yy_buffer_stack)) {
|
| /* First allocation is just for 2 elements, since we don't know if this
| * scanner will even need a stack. We use 2 instead of 1 to avoid an
| * immediate realloc on the next call.
| */
| num_to_alloc = 1;
| (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
| (num_to_alloc * sizeof(struct yy_buffer_state*)
| );
| if ( ! (yy_buffer_stack) )
| YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
|
| memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
|
| (yy_buffer_stack_max) = num_to_alloc;
| (yy_buffer_stack_top) = 0;
| return;
| }
|
| if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
|
| /* Increase the buffer to prepare for a possible push. */
| int grow_size = 8 /* arbitrary grow size */;
|
| num_to_alloc = (yy_buffer_stack_max) + grow_size;
| (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
| ((yy_buffer_stack),
| num_to_alloc * sizeof(struct yy_buffer_state*)
| );
| if ( ! (yy_buffer_stack) )
| YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
|
| /* zero only the new slots.*/
| memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
| (yy_buffer_stack_max) = num_to_alloc;
| }
| }
|
| /** Setup the input buffer state to scan directly from a user-specified character buffer.
| * @param base the character buffer
| * @param size the size in bytes of the character buffer
| *
| * @return the newly allocated buffer state object.
| */
| YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
| {
| YY_BUFFER_STATE b;
|
| if ( size < 2 ||
| base[size-2] != YY_END_OF_BUFFER_CHAR ||
| base[size-1] != YY_END_OF_BUFFER_CHAR )
| /* They forgot to leave room for the EOB's. */
| return 0;
|
| b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
| if ( ! b )
| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
|
| b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
| b->yy_buf_pos = b->yy_ch_buf = base;
| b->yy_is_our_buffer = 0;
| b->yy_input_file = 0;
| b->yy_n_chars = b->yy_buf_size;
| b->yy_is_interactive = 0;
| b->yy_at_bol = 1;
| b->yy_fill_buffer = 0;
| b->yy_buffer_status = YY_BUFFER_NEW;
|
| yy_switch_to_buffer(b );
|
| return b;
| }
|
| /** Setup the input buffer state to scan a string. The next call to yylex() will
| * scan from a @e copy of @a str.
| * @param yystr a NUL-terminated string to scan
| *
| * @return the newly allocated buffer state object.
| * @note If you want to scan bytes that may contain NUL values, then use
| * yy_scan_bytes() instead.
| */
| YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
| {
|
| return yy_scan_bytes(yystr,strlen(yystr) );
| }
|
| /** Setup the input buffer state to scan the given bytes. The next call to yylex() will
| * scan from a @e copy of @a bytes.
| * @param bytes the byte buffer to scan
| * @param len the number of bytes in the buffer pointed to by @a bytes.
| *
| * @return the newly allocated buffer state object.
| */
| YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len )
| {
| YY_BUFFER_STATE b;
| char *buf;
| yy_size_t n;
| int i;
|
| /* Get memory for full buffer, including space for trailing EOB's. */
| n = _yybytes_len + 2;
| buf = (char *) yyalloc(n );
| if ( ! buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
|
| for ( i = 0; i < _yybytes_len; ++i )
| buf[i] = yybytes[i];
|
| buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
|
| b = yy_scan_buffer(buf,n );
| if ( ! b )
| YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
|
| /* It's okay to grow etc. this buffer, and we should throw it
| * away when we're done.
| */
| b->yy_is_our_buffer = 1;
|
| return b;
| }
|
| #ifndef YY_EXIT_FAILURE
| #define YY_EXIT_FAILURE 2
| #endif
|
| static void yy_fatal_error (yyconst char* msg )
| {
| (void) fprintf( stderr, "%s\n", msg );
| exit( YY_EXIT_FAILURE );
| }
|
| /* Redefine yyless() so it works in section 3 code. */
|
| #undef yyless
| #define yyless(n) \
| do \
| { \
| /* Undo effects of setting up yytext. */ \
| int yyless_macro_arg = (n); \
| YY_LESS_LINENO(yyless_macro_arg);\
| yytext[yyleng] = (yy_hold_char); \
| (yy_c_buf_p) = yytext + yyless_macro_arg; \
| (yy_hold_char) = *(yy_c_buf_p); \
| *(yy_c_buf_p) = '\0'; \
| yyleng = yyless_macro_arg; \
| } \
| while ( 0 )
|
| /* Accessor methods (get/set functions) to struct members. */
|
| /** Get the current line number.
| *
| */
| int yyget_lineno (void)
| {
|
| return yylineno;
| }
|
| /** Get the input stream.
| *
| */
| FILE *yyget_in (void)
| {
| return yyin;
| }
|
| /** Get the output stream.
| *
| */
| FILE *yyget_out (void)
| {
| return yyout;
| }
|
| /** Get the length of the current token.
| *
| */
| int yyget_leng (void)
| {
| return yyleng;
| }
|
| /** Get the current token.
| *
| */
|
| char *yyget_text (void)
| {
| return yytext;
| }
|
| /** Set the current line number.
| * @param line_number
| *
| */
| void yyset_lineno (int line_number )
| {
|
| yylineno = line_number;
| }
|
| /** Set the input stream. This does not discard the current
| * input buffer.
| * @param in_str A readable stream.
| *
| * @see yy_switch_to_buffer
| */
| void yyset_in (FILE * in_str )
| {
| yyin = in_str ;
| }
|
| void yyset_out (FILE * out_str )
| {
| yyout = out_str ;
| }
|
| int yyget_debug (void)
| {
| return yy_flex_debug;
| }
|
| void yyset_debug (int bdebug )
| {
| yy_flex_debug = bdebug ;
| }
|
| static int yy_init_globals (void)
| {
| /* Initialization is the same as for the non-reentrant scanner.
| * This function is called from yylex_destroy(), so don't allocate here.
| */
|
| (yy_buffer_stack) = 0;
| (yy_buffer_stack_top) = 0;
| (yy_buffer_stack_max) = 0;
| (yy_c_buf_p) = (char *) 0;
| (yy_init) = 0;
| (yy_start) = 0;
|
| (yy_state_buf) = 0;
| (yy_state_ptr) = 0;
| (yy_full_match) = 0;
| (yy_lp) = 0;
|
| /* Defined in main.c */
| #ifdef YY_STDINIT
| yyin = stdin;
| yyout = stdout;
| #else
| yyin = (FILE *) 0;
| yyout = (FILE *) 0;
| #endif
|
| /* For future reference: Set errno on error, since we are called by
| * yylex_init()
| */
| return 0;
| }
|
| /* yylex_destroy is for both reentrant and non-reentrant scanners. */
| int yylex_destroy (void)
| {
|
| /* Pop the buffer stack, destroying each element. */
| while(YY_CURRENT_BUFFER){
| yy_delete_buffer(YY_CURRENT_BUFFER );
| YY_CURRENT_BUFFER_LVALUE = NULL;
| yypop_buffer_state();
| }
|
| /* Destroy the stack itself. */
| yyfree((yy_buffer_stack) );
| (yy_buffer_stack) = NULL;
|
| yyfree ( (yy_state_buf) );
| (yy_state_buf) = NULL;
|
| /* Reset the globals. This is important in a non-reentrant scanner so the next time
| * yylex() is called, initialization will occur. */
| yy_init_globals( );
|
| return 0;
| }
|
| /*
| * Internal utility routines.
| */
|
| #ifndef yytext_ptr
| static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
| {
| register int i;
| for ( i = 0; i < n; ++i )
| s1[i] = s2[i];
| }
| #endif
|
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen (yyconst char * s )
| {
| register int n;
| for ( n = 0; s[n]; ++n )
| ;
|
| return n;
| }
| #endif
|
| void *yyalloc (yy_size_t size )
| {
| return (void *) malloc( size );
| }
|
| void *yyrealloc (void * ptr, yy_size_t size )
| {
| /* The cast to (char *) in the following accommodates both
| * implementations that use char* generic pointers, and those
| * that use void* generic pointers. It works with the latter
| * because both ANSI C and C++ allow castless assignment from
| * any pointer type to void*, and deal with argument conversions
| * as though doing an assignment.
| */
| return (void *) realloc( (char *) ptr, size );
| }
|
| void yyfree (void * ptr )
| {
| free( (char *) ptr ); /* see yyrealloc() for (char *) cast */
| }
|
| #define YYTABLES_NAME "yytables"
|
| #line 9 "conftest.l"
|
|
| #ifdef YYTEXT_POINTER
| extern char *yytext;
| #endif
| int
| main (void)
| {
| return ! yylex () + ! yywrap ();
| }
configure:20021: result: none needed
configure:20027: checking whether yytext is a pointer
configure:20048: g++ -o conftest -g -O2 conftest.cpp >&5
conftest.l: In function 'int yylex()':
conftest.l:6: error: 'input' was not declared in this scope
configure:20055: $? = 1
configure: failed program was:
| #define YYTEXT_POINTER 1
|
| #line 3 "lex.yy.c"
|
| #define YY_INT_ALIGNED short int
|
| /* A lexical scanner generated by flex */
|
| #define FLEX_SCANNER
| #define YY_FLEX_MAJOR_VERSION 2
| #define YY_FLEX_MINOR_VERSION 5
| #define YY_FLEX_SUBMINOR_VERSION 35
| #if YY_FLEX_SUBMINOR_VERSION > 0
| #define FLEX_BETA
| #endif
|
| /* First, we deal with platform-specific or compiler-specific issues. */
|
| /* begin standard C headers. */
| #include <stdio.h>
| #include <string.h>
| #include <errno.h>
| #include <stdlib.h>
|
| /* end standard C headers. */
|
| /* flex integer type definitions */
|
| #ifndef FLEXINT_H
| #define FLEXINT_H
|
| /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
|
| #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
|
| /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
| * if you want the limit (max/min) macros for int types.
| */
| #ifndef __STDC_LIMIT_MACROS
| #define __STDC_LIMIT_MACROS 1
| #endif
|
| #include <inttypes.h>
| typedef int8_t flex_int8_t;
| typedef uint8_t flex_uint8_t;
| typedef int16_t flex_int16_t;
| typedef uint16_t flex_uint16_t;
| typedef int32_t flex_int32_t;
| typedef uint32_t flex_uint32_t;
| #else
| typedef signed char flex_int8_t;
| typedef short int flex_int16_t;
| typedef int flex_int32_t;
| typedef unsigned char flex_uint8_t;
| typedef unsigned short int flex_uint16_t;
| typedef unsigned int flex_uint32_t;
| #endif /* ! C99 */
|
| /* Limits of integral types. */
| #ifndef INT8_MIN
| #define INT8_MIN (-128)
| #endif
| #ifndef INT16_MIN
| #define INT16_MIN (-32767-1)
| #endif
| #ifndef INT32_MIN
| #define INT32_MIN (-2147483647-1)
| #endif
| #ifndef INT8_MAX
| #define INT8_MAX (127)
| #endif
| #ifndef INT16_MAX
| #define INT16_MAX (32767)
| #endif
| #ifndef INT32_MAX
| #define INT32_MAX (2147483647)
| #endif
| #ifndef UINT8_MAX
| #define UINT8_MAX (255U)
| #endif
| #ifndef UINT16_MAX
| #define UINT16_MAX (65535U)
| #endif
| #ifndef UINT32_MAX
| #define UINT32_MAX (4294967295U)
| #endif
|
| #endif /* ! FLEXINT_H */
|
| #ifdef __cplusplus
|
| /* The "const" storage-class-modifier is valid. */
| #define YY_USE_CONST
|
| #else /* ! __cplusplus */
|
| /* C99 requires __STDC__ to be defined as 1. */
| #if defined (__STDC__)
|
| #define YY_USE_CONST
|
| #endif /* defined (__STDC__) */
| #endif /* ! __cplusplus */
|
| #ifdef YY_USE_CONST
| #define yyconst const
| #else
| #define yyconst
| #endif
|
| /* Returned upon end-of-file. */
| #define YY_NULL 0
|
| /* Promotes a possibly negative, possibly signed char to an unsigned
| * integer for use as an array index. If the signed char is negative,
| * we want to instead treat it as an 8-bit unsigned char, hence the
| * double cast.
| */
| #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
|
| /* Enter a start condition. This macro really ought to take a parameter,
| * but we do it the disgusting crufty way forced on us by the ()-less
| * definition of BEGIN.
| */
| #define BEGIN (yy_start) = 1 + 2 *
|
| /* Translate the current start state into a value that can be later handed
| * to BEGIN to return to the state. The YYSTATE alias is for lex
| * compatibility.
| */
| #define YY_START (((yy_start) - 1) / 2)
| #define YYSTATE YY_START
|
| /* Action number for EOF rule of a given start state. */
| #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
|
| /* Special action meaning "start processing a new file". */
| #define YY_NEW_FILE yyrestart(yyin )
|
| #define YY_END_OF_BUFFER_CHAR 0
|
| /* Size of default input buffer. */
| #ifndef YY_BUF_SIZE
| #define YY_BUF_SIZE 16384
| #endif
|
| /* The state buf must be large enough to hold one state per character in the main buffer.
| */
| #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
|
| #ifndef YY_TYPEDEF_YY_BUFFER_STATE
| #define YY_TYPEDEF_YY_BUFFER_STATE
| typedef struct yy_buffer_state *YY_BUFFER_STATE;
| #endif
|
| extern int yyleng;
|
| extern FILE *yyin, *yyout;
|
| #define EOB_ACT_CONTINUE_SCAN 0
| #define EOB_ACT_END_OF_FILE 1
| #define EOB_ACT_LAST_MATCH 2
|
| #define YY_LESS_LINENO(n)
|
| /* Return all but the first "n" matched characters back to the input stream. */
| #define yyless(n) \
| do \
| { \
| /* Undo effects of setting up yytext. */ \
| int yyless_macro_arg = (n); \
| YY_LESS_LINENO(yyless_macro_arg);\
| *yy_cp = (yy_hold_char); \
| YY_RESTORE_YY_MORE_OFFSET \
| (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
| YY_DO_BEFORE_ACTION; /* set up yytext again */ \
| } \
| while ( 0 )
|
| #define unput(c) yyunput( c, (yytext_ptr) )
|
| #ifndef YY_TYPEDEF_YY_SIZE_T
| #define YY_TYPEDEF_YY_SIZE_T
| typedef size_t yy_size_t;
| #endif
|
| #ifndef YY_STRUCT_YY_BUFFER_STATE
| #define YY_STRUCT_YY_BUFFER_STATE
| struct yy_buffer_state
| {
| FILE *yy_input_file;
|
| char *yy_ch_buf; /* input buffer */
| char *yy_buf_pos; /* current position in input buffer */
|
| /* Size of input buffer in bytes, not including room for EOB
| * characters.
| */
| yy_size_t yy_buf_size;
|
| /* Number of characters read into yy_ch_buf, not including EOB
| * characters.
| */
| int yy_n_chars;
|
| /* Whether we "own" the buffer - i.e., we know we created it,
| * and can realloc() it to grow it, and should free() it to
| * delete it.
| */
| int yy_is_our_buffer;
|
| /* Whether this is an "interactive" input source; if so, and
| * if we're using stdio for input, then we want to use getc()
| * instead of fread(), to make sure we stop fetching input after
| * each newline.
| */
| int yy_is_interactive;
|
| /* Whether we're considered to be at the beginning of a line.
| * If so, '^' rules will be active on the next match, otherwise
| * not.
| */
| int yy_at_bol;
|
| int yy_bs_lineno; /**< The line count. */
| int yy_bs_column; /**< The column count. */
|
| /* Whether to try to fill the input buffer when we reach the
| * end of it.
| */
| int yy_fill_buffer;
|
| int yy_buffer_status;
|
| #define YY_BUFFER_NEW 0
| #define YY_BUFFER_NORMAL 1
| /* When an EOF's been seen but there's still some text to process
| * then we mark the buffer as YY_EOF_PENDING, to indicate that we
| * shouldn't try reading from the input source any more. We might
| * still have a bunch of tokens to match, though, because of
| * possible backing-up.
| *
| * When we actually see the EOF, we change the status to "new"
| * (via yyrestart()), so that the user can continue scanning by
| * just pointing yyin at a new input file.
| */
| #define YY_BUFFER_EOF_PENDING 2
|
| };
| #endif /* !YY_STRUCT_YY_BUFFER_STATE */
|
| /* Stack of input buffers. */
| static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
| static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
| static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
|
| /* We provide macros for accessing buffer states in case in the
| * future we want to put the buffer states in a more general
| * "scanner state".
| *
| * Returns the top of the stack, or NULL.
| */
| #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
| ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
| : NULL)
|
| /* Same as previous macro, but useful when we know that the buffer stack is not
| * NULL or when we need an lvalue. For internal use only.
| */
| #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
|
| /* yy_hold_char holds the character lost when yytext is formed. */
| static char yy_hold_char;
| static int yy_n_chars; /* number of characters read into yy_ch_buf */
| int yyleng;
|
| /* Points to current character in buffer. */
| static char *yy_c_buf_p = (char *) 0;
| static int yy_init = 0; /* whether we need to initialize */
| static int yy_start = 0; /* start state number */
|
| /* Flag which is used to allow yywrap()'s to do buffer switches
| * instead of setting up a fresh yyin. A bit of a hack ...
| */
| static int yy_did_buffer_switch_on_eof;
|
| void yyrestart (FILE *input_file );
| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer );
| YY_BUFFER_STATE yy_create_buffer (FILE *file,int size );
| void yy_delete_buffer (YY_BUFFER_STATE b );
| void yy_flush_buffer (YY_BUFFER_STATE b );
| void yypush_buffer_state (YY_BUFFER_STATE new_buffer );
| void yypop_buffer_state (void );
|
| static void yyensure_buffer_stack (void );
| static void yy_load_buffer_state (void );
| static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file );
|
| #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
|
| YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size );
| YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str );
| YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len );
|
| void *yyalloc (yy_size_t );
| void *yyrealloc (void *,yy_size_t );
| void yyfree (void * );
|
| #define yy_new_buffer yy_create_buffer
|
| #define yy_set_interactive(is_interactive) \
| { \
| if ( ! YY_CURRENT_BUFFER ){ \
| yyensure_buffer_stack (); \
| YY_CURRENT_BUFFER_LVALUE = \
| yy_create_buffer(yyin,YY_BUF_SIZE ); \
| } \
| YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
| }
|
| #define yy_set_bol(at_bol) \
| { \
| if ( ! YY_CURRENT_BUFFER ){\
| yyensure_buffer_stack (); \
| YY_CURRENT_BUFFER_LVALUE = \
| yy_create_buffer(yyin,YY_BUF_SIZE ); \
| } \
| YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
| }
|
| #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
|
| /* Begin user sect3 */
|
| typedef unsigned char YY_CHAR;
|
| FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
|
| typedef int yy_state_type;
|
| extern int yylineno;
|
| int yylineno = 1;
|
| extern char *yytext;
| #define yytext_ptr yytext
|
| static yy_state_type yy_get_previous_state (void );
| static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
| static int yy_get_next_buffer (void );
| static void yy_fatal_error (yyconst char msg[] );
|
| /* Done after the current pattern has been matched and before the
| * corresponding action - sets up yytext.
| */
| #define YY_DO_BEFORE_ACTION \
| (yytext_ptr) = yy_bp; \
| (yytext_ptr) -= (yy_more_len); \
| yyleng = (size_t) (yy_cp - (yytext_ptr)); \
| (yy_hold_char) = *yy_cp; \
| *yy_cp = '\0'; \
| (yy_c_buf_p) = yy_cp;
|
| #define YY_NUM_RULES 8
| #define YY_END_OF_BUFFER 9
| /* This struct is not used in this scanner,
| but its presence is necessary. */
| struct yy_trans_info
| {
| flex_int32_t yy_verify;
| flex_int32_t yy_nxt;
| };
| static yyconst flex_int16_t yy_acclist[23] =
| { 0,
| 9, 7, 8, 8, 1, 7, 8, 2, 7, 8,
| 3, 7, 8, 4, 7, 8, 5, 7, 8, 6,
| 7, 8
| } ;
|
| static yyconst flex_int16_t yy_accept[14] =
| { 0,
| 1, 1, 1, 2, 4, 5, 8, 11, 14, 17,
| 20, 23, 23
| } ;
|
| static yyconst flex_int32_t yy_ec[256] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 2,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 3, 4, 5, 6,
|
| 7, 8, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
|
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1
| } ;
|
| static yyconst flex_int32_t yy_meta[9] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1
| } ;
|
| static yyconst flex_int16_t yy_base[13] =
| { 0,
| 0, 0, 9, 10, 10, 10, 10, 10, 10, 10,
| 10, 10
| } ;
|
| static yyconst flex_int16_t yy_def[13] =
| { 0,
| 12, 1, 12, 12, 12, 12, 12, 12, 12, 12,
| 12, 0
| } ;
|
| static yyconst flex_int16_t yy_nxt[19] =
| { 0,
| 4, 5, 6, 7, 8, 9, 10, 11, 12, 3,
| 12, 12, 12, 12, 12, 12, 12, 12
| } ;
|
| static yyconst flex_int16_t yy_chk[19] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1, 3, 12,
| 12, 12, 12, 12, 12, 12, 12, 12
| } ;
|
| extern int yy_flex_debug;
| int yy_flex_debug = 0;
|
| static yy_state_type *yy_state_buf=0, *yy_state_ptr=0;
| static char *yy_full_match;
| static int yy_lp;
| #define REJECT \
| { \
| *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \
| yy_cp = (yy_full_match); /* restore poss. backed-over text */ \
| ++(yy_lp); \
| goto find_rule; \
| }
|
| static int yy_more_flag = 0;
| static int yy_more_len = 0;
| #define yymore() ((yy_more_flag) = 1)
| #define YY_MORE_ADJ (yy_more_len)
| #define YY_RESTORE_YY_MORE_OFFSET
| char *yytext;
| #line 1 "conftest.l"
| #line 468 "lex.yy.c"
|
| #define INITIAL 0
|
| #ifndef YY_NO_UNISTD_H
| /* Special case for "unistd.h", since it is non-ANSI. We include it way
| * down here because we want the user's section 1 to have been scanned first.
| * The user has a chance to override it with an option.
| */
| #include <unistd.h>
| #endif
|
| #ifndef YY_EXTRA_TYPE
| #define YY_EXTRA_TYPE void *
| #endif
|
| static int yy_init_globals (void );
|
| /* Accessor methods to globals.
| These are made visible to non-reentrant scanners for convenience. */
|
| int yylex_destroy (void );
|
| int yyget_debug (void );
|
| void yyset_debug (int debug_flag );
|
| YY_EXTRA_TYPE yyget_extra (void );
|
| void yyset_extra (YY_EXTRA_TYPE user_defined );
|
| FILE *yyget_in (void );
|
| void yyset_in (FILE * in_str );
|
| FILE *yyget_out (void );
|
| void yyset_out (FILE * out_str );
|
| int yyget_leng (void );
|
| char *yyget_text (void );
|
| int yyget_lineno (void );
|
| void yyset_lineno (int line_number );
|
| /* Macros after this point can all be overridden by user definitions in
| * section 1.
| */
|
| #ifndef YY_SKIP_YYWRAP
| #ifdef __cplusplus
| extern "C" int yywrap (void );
| #else
| extern int yywrap (void );
| #endif
| #endif
|
| static void yyunput (int c,char *buf_ptr );
|
| #ifndef yytext_ptr
| static void yy_flex_strncpy (char *,yyconst char *,int );
| #endif
|
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen (yyconst char * );
| #endif
|
| #ifndef YY_NO_INPUT
|
| #ifdef __cplusplus
| static int yyinput (void );
| #else
| static int input (void );
| #endif
|
| #endif
|
| /* Amount of stuff to slurp up with each read. */
| #ifndef YY_READ_BUF_SIZE
| #define YY_READ_BUF_SIZE 8192
| #endif
|
| /* Copy whatever the last rule matched to the standard output. */
| #ifndef ECHO
| /* This used to be an fputs(), but since the string might contain NUL's,
| * we now use fwrite().
| */
| #define ECHO fwrite( yytext, yyleng, 1, yyout )
| #endif
|
| /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
| * is returned in "result".
| */
| #ifndef YY_INPUT
| #define YY_INPUT(buf,result,max_size) \
| if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
| { \
| int c = '*'; \
| int n; \
| for ( n = 0; n < max_size && \
| (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
| buf[n] = (char) c; \
| if ( c == '\n' ) \
| buf[n++] = (char) c; \
| if ( c == EOF && ferror( yyin ) ) \
| YY_FATAL_ERROR( "input in flex scanner failed" ); \
| result = n; \
| } \
| else \
| { \
| errno=0; \
| while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
| { \
| if( errno != EINTR) \
| { \
| YY_FATAL_ERROR( "input in flex scanner failed" ); \
| break; \
| } \
| errno=0; \
| clearerr(yyin); \
| } \
| }\
| \
|
| #endif
|
| /* No semi-colon after return; correct usage is to write "yyterminate();" -
| * we don't want an extra ';' after the "return" because that will cause
| * some compilers to complain about unreachable statements.
| */
| #ifndef yyterminate
| #define yyterminate() return YY_NULL
| #endif
|
| /* Number of entries by which start-condition stack grows. */
| #ifndef YY_START_STACK_INCR
| #define YY_START_STACK_INCR 25
| #endif
|
| /* Report a fatal error. */
| #ifndef YY_FATAL_ERROR
| #define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
| #endif
|
| /* end tables serialization structures and prototypes */
|
| /* Default declaration of generated scanner - a define so the user can
| * easily add parameters.
| */
| #ifndef YY_DECL
| #define YY_DECL_IS_OURS 1
|
| extern int yylex (void);
|
| #define YY_DECL int yylex (void)
| #endif /* !YY_DECL */
|
| /* Code executed at the beginning of each rule, after yytext and yyleng
| * have been set up.
| */
| #ifndef YY_USER_ACTION
| #define YY_USER_ACTION
| #endif
|
| /* Code executed at the end of each rule. */
| #ifndef YY_BREAK
| #define YY_BREAK break;
| #endif
|
| #define YY_RULE_SETUP \
| YY_USER_ACTION
|
| /** The main scanner function which does all the work.
| */
| YY_DECL
| {
| register yy_state_type yy_current_state;
| register char *yy_cp, *yy_bp;
| register int yy_act;
|
| #line 1 "conftest.l"
|
| #line 652 "lex.yy.c"
|
| if ( !(yy_init) )
| {
| (yy_init) = 1;
|
| #ifdef YY_USER_INIT
| YY_USER_INIT;
| #endif
|
| /* Create the reject buffer large enough to save one state per allowed character. */
| if ( ! (yy_state_buf) )
| (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE );
| if ( ! (yy_state_buf) )
| YY_FATAL_ERROR( "out of dynamic memory in yylex()" );
|
| if ( ! (yy_start) )
| (yy_start) = 1; /* first start state */
|
| if ( ! yyin )
| yyin = stdin;
|
| if ( ! yyout )
| yyout = stdout;
|
| if ( ! YY_CURRENT_BUFFER ) {
| yyensure_buffer_stack ();
| YY_CURRENT_BUFFER_LVALUE =
| yy_create_buffer(yyin,YY_BUF_SIZE );
| }
|
| yy_load_buffer_state( );
| }
|
| while ( 1 ) /* loops until end-of-file is reached */
| {
| (yy_more_len) = 0;
| if ( (yy_more_flag) )
| {
| (yy_more_len) = (yy_c_buf_p) - (yytext_ptr);
| (yy_more_flag) = 0;
| }
| yy_cp = (yy_c_buf_p);
|
| /* Support of yytext. */
| *yy_cp = (yy_hold_char);
|
| /* yy_bp points to the position in yy_ch_buf of the start of
| * the current run.
| */
| yy_bp = yy_cp;
|
| yy_current_state = (yy_start);
|
| (yy_state_ptr) = (yy_state_buf);
| *(yy_state_ptr)++ = yy_current_state;
|
| yy_match:
| do
| {
| register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| *(yy_state_ptr)++ = yy_current_state;
| ++yy_cp;
| }
| while ( yy_base[yy_current_state] != 10 );
|
| yy_find_action:
| yy_current_state = *--(yy_state_ptr);
| (yy_lp) = yy_accept[yy_current_state];
| find_rule: /* we branch to this label when backing up */
| for ( ; ; ) /* until we find what rule we matched */
| {
| if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] )
| {
| yy_act = yy_acclist[(yy_lp)];
| {
| (yy_full_match) = yy_cp;
| break;
| }
| }
| --yy_cp;
| yy_current_state = *--(yy_state_ptr);
| (yy_lp) = yy_accept[yy_current_state];
| }
|
| YY_DO_BEFORE_ACTION;
|
| do_action: /* This label is used only to access EOF actions. */
|
| switch ( yy_act )
| { /* beginning of action switch */
| case 1:
| YY_RULE_SETUP
| #line 2 "conftest.l"
| { ECHO; }
| YY_BREAK
| case 2:
| YY_RULE_SETUP
| #line 3 "conftest.l"
| { REJECT; }
| YY_BREAK
| case 3:
| YY_RULE_SETUP
| #line 4 "conftest.l"
| { yymore (); }
| YY_BREAK
| case 4:
| YY_RULE_SETUP
| #line 5 "conftest.l"
| { yyless (1); }
| YY_BREAK
| case 5:
| YY_RULE_SETUP
| #line 6 "conftest.l"
| { yyless (input () != 0); }
| YY_BREAK
| case 6:
| YY_RULE_SETUP
| #line 7 "conftest.l"
| { unput (yytext[0]); }
| YY_BREAK
| case 7:
| YY_RULE_SETUP
| #line 8 "conftest.l"
| { BEGIN INITIAL; }
| YY_BREAK
| case 8:
| YY_RULE_SETUP
| #line 9 "conftest.l"
| ECHO;
| YY_BREAK
| #line 790 "lex.yy.c"
| case YY_STATE_EOF(INITIAL):
| yyterminate();
|
| case YY_END_OF_BUFFER:
| {
| /* Amount of text matched not including the EOB char. */
| int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
|
| /* Undo the effects of YY_DO_BEFORE_ACTION. */
| *yy_cp = (yy_hold_char);
| YY_RESTORE_YY_MORE_OFFSET
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
| {
| /* We're scanning a new file or input source. It's
| * possible that this happened because the user
| * just pointed yyin at a new source and called
| * yylex(). If so, then we have to assure
| * consistency between YY_CURRENT_BUFFER and our
| * globals. Here is the right place to do so, because
| * this is the first action (other than possibly a
| * back-up) that will match for the new input source.
| */
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
| YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
| }
|
| /* Note that here we test for yy_c_buf_p "<=" to the position
| * of the first EOB in the buffer, since yy_c_buf_p will
| * already have been incremented past the NUL character
| * (since all states make transitions on EOB to the
| * end-of-buffer state). Contrast this with the test
| * in input().
| */
| if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
| { /* This was really a NUL. */
| yy_state_type yy_next_state;
|
| (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
|
| yy_current_state = yy_get_previous_state( );
|
| /* Okay, we're now positioned to make the NUL
| * transition. We couldn't have
| * yy_get_previous_state() go ahead and do it
| * for us because it doesn't know how to deal
| * with the possibility of jamming (and we don't
| * want to build jamming into it because then it
| * will run more slowly).
| */
|
| yy_next_state = yy_try_NUL_trans( yy_current_state );
|
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
|
| if ( yy_next_state )
| {
| /* Consume the NUL. */
| yy_cp = ++(yy_c_buf_p);
| yy_current_state = yy_next_state;
| goto yy_match;
| }
|
| else
| {
| yy_cp = (yy_c_buf_p);
| goto yy_find_action;
| }
| }
|
| else switch ( yy_get_next_buffer( ) )
| {
| case EOB_ACT_END_OF_FILE:
| {
| (yy_did_buffer_switch_on_eof) = 0;
|
| if ( yywrap( ) )
| {
| /* Note: because we've taken care in
| * yy_get_next_buffer() to have set up
| * yytext, we can now set up
| * yy_c_buf_p so that if some total
| * hoser (like flex itself) wants to
| * call the scanner after we return the
| * YY_NULL, it'll still work - another
| * YY_NULL will get returned.
| */
| (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
|
| yy_act = YY_STATE_EOF(YY_START);
| goto do_action;
| }
|
| else
| {
| if ( ! (yy_did_buffer_switch_on_eof) )
| YY_NEW_FILE;
| }
| break;
| }
|
| case EOB_ACT_CONTINUE_SCAN:
| (yy_c_buf_p) =
| (yytext_ptr) + yy_amount_of_matched_text;
|
| yy_current_state = yy_get_previous_state( );
|
| yy_cp = (yy_c_buf_p);
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| goto yy_match;
|
| case EOB_ACT_LAST_MATCH:
| (yy_c_buf_p) =
| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
|
| yy_current_state = yy_get_previous_state( );
|
| yy_cp = (yy_c_buf_p);
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| goto yy_find_action;
| }
| break;
| }
|
| default:
| YY_FATAL_ERROR(
| "fatal flex scanner internal error--no action found" );
| } /* end of action switch */
| } /* end of scanning one token */
| } /* end of yylex */
|
| /* yy_get_next_buffer - try to read in a new buffer
| *
| * Returns a code representing an action:
| * EOB_ACT_LAST_MATCH -
| * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
| * EOB_ACT_END_OF_FILE - end of file
| */
| static int yy_get_next_buffer (void)
| {
| register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
| register char *source = (yytext_ptr);
| register int number_to_move, i;
| int ret_val;
|
| if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
| YY_FATAL_ERROR(
| "fatal flex scanner internal error--end of buffer missed" );
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
| { /* Don't try to fill the buffer, so this is an EOF. */
| if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
| {
| /* We matched a single character, the EOB, so
| * treat this as a final EOF.
| */
| return EOB_ACT_END_OF_FILE;
| }
|
| else
| {
| /* We matched some text prior to the EOB, first
| * process it.
| */
| return EOB_ACT_LAST_MATCH;
| }
| }
|
| /* Try to read more data. */
|
| /* First move last chars to start of buffer. */
| number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
|
| for ( i = 0; i < number_to_move; ++i )
| *(dest++) = *(source++);
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
| /* don't do the read, it's not guaranteed to return an EOF,
| * just force an EOF
| */
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
|
| else
| {
| int num_to_read =
| YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
|
| while ( num_to_read <= 0 )
| { /* Not enough room in the buffer - grow it. */
|
| YY_FATAL_ERROR(
| "input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
|
| }
|
| if ( num_to_read > YY_READ_BUF_SIZE )
| num_to_read = YY_READ_BUF_SIZE;
|
| /* Read in more data. */
| YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
| (yy_n_chars), (size_t) num_to_read );
|
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| if ( (yy_n_chars) == 0 )
| {
| if ( number_to_move == YY_MORE_ADJ )
| {
| ret_val = EOB_ACT_END_OF_FILE;
| yyrestart(yyin );
| }
|
| else
| {
| ret_val = EOB_ACT_LAST_MATCH;
| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
| YY_BUFFER_EOF_PENDING;
| }
| }
|
| else
| ret_val = EOB_ACT_CONTINUE_SCAN;
|
| if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
| /* Extend the array by 50%, plus the number we really need. */
| yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
| if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
| }
|
| (yy_n_chars) += number_to_move;
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
|
| (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
|
| return ret_val;
| }
|
| /* yy_get_previous_state - get the state just before the EOB char was reached */
|
| static yy_state_type yy_get_previous_state (void)
| {
| register yy_state_type yy_current_state;
| register char *yy_cp;
|
| yy_current_state = (yy_start);
|
| (yy_state_ptr) = (yy_state_buf);
| *(yy_state_ptr)++ = yy_current_state;
|
| for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
| {
| register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| *(yy_state_ptr)++ = yy_current_state;
| }
|
| return yy_current_state;
| }
|
| /* yy_try_NUL_trans - try to make a transition on the NUL character
| *
| * synopsis
| * next_state = yy_try_NUL_trans( current_state );
| */
| static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
| {
| register int yy_is_jam;
|
| register YY_CHAR yy_c = 1;
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[(unsigned int) yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
| yy_is_jam = (yy_current_state == 12);
| if ( ! yy_is_jam )
| *(yy_state_ptr)++ = yy_current_state;
|
| return yy_is_jam ? 0 : yy_current_state;
| }
|
| static void yyunput (int c, register char * yy_bp )
| {
| register char *yy_cp;
|
| yy_cp = (yy_c_buf_p);
|
| /* undo effects of setting up yytext */
| *yy_cp = (yy_hold_char);
|
| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
| { /* need to shift things up to make room */
| /* +2 for EOB chars. */
| register int number_to_move = (yy_n_chars) + 2;
| register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
| YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
| register char *source =
| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
|
| while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
| *--dest = *--source;
|
| yy_cp += (int) (dest - source);
| yy_bp += (int) (dest - source);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
|
| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
| YY_FATAL_ERROR( "flex scanner push-back overflow" );
| }
|
| *--yy_cp = (char) c;
|
| (yytext_ptr) = yy_bp;
| (yy_hold_char) = *yy_cp;
| (yy_c_buf_p) = yy_cp;
| }
|
| #ifndef YY_NO_INPUT
| #ifdef __cplusplus
| static int yyinput (void)
| #else
| static int input (void)
| #endif
|
| {
| int c;
|
| *(yy_c_buf_p) = (yy_hold_char);
|
| if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
| {
| /* yy_c_buf_p now points to the character we want to return.
| * If this occurs *before* the EOB characters, then it's a
| * valid NUL; if not, then we've hit the end of the buffer.
| */
| if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
| /* This was really a NUL. */
| *(yy_c_buf_p) = '\0';
|
| else
| { /* need more input */
| int offset = (yy_c_buf_p) - (yytext_ptr);
| ++(yy_c_buf_p);
|
| switch ( yy_get_next_buffer( ) )
| {
| case EOB_ACT_LAST_MATCH:
| /* This happens because yy_g_n_b()
| * sees that we've accumulated a
| * token and flags that we need to
| * try matching the token before
| * proceeding. But for input(),
| * there's no matching to consider.
| * So convert the EOB_ACT_LAST_MATCH
| * to EOB_ACT_END_OF_FILE.
| */
|
| /* Reset buffer status. */
| yyrestart(yyin );
|
| /*FALLTHROUGH*/
|
| case EOB_ACT_END_OF_FILE:
| {
| if ( yywrap( ) )
| return EOF;
|
| if ( ! (yy_did_buffer_switch_on_eof) )
| YY_NEW_FILE;
| #ifdef __cplusplus
| return yyinput();
| #else
| return input();
| #endif
| }
|
| case EOB_ACT_CONTINUE_SCAN:
| (yy_c_buf_p) = (yytext_ptr) + offset;
| break;
| }
| }
| }
|
| c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
| *(yy_c_buf_p) = '\0'; /* preserve yytext */
| (yy_hold_char) = *++(yy_c_buf_p);
|
| return c;
| }
| #endif /* ifndef YY_NO_INPUT */
|
| /** Immediately switch to a different input stream.
| * @param input_file A readable stream.
| *
| * @note This function does not reset the start condition to @c INITIAL .
| */
| void yyrestart (FILE * input_file )
| {
|
| if ( ! YY_CURRENT_BUFFER ){
| yyensure_buffer_stack ();
| YY_CURRENT_BUFFER_LVALUE =
| yy_create_buffer(yyin,YY_BUF_SIZE );
| }
|
| yy_init_buffer(YY_CURRENT_BUFFER,input_file );
| yy_load_buffer_state( );
| }
|
| /** Switch to a different input buffer.
| * @param new_buffer The new input buffer.
| *
| */
| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
| {
|
| /* TODO. We should be able to replace this entire function body
| * with
| * yypop_buffer_state();
| * yypush_buffer_state(new_buffer);
| */
| yyensure_buffer_stack ();
| if ( YY_CURRENT_BUFFER == new_buffer )
| return;
|
| if ( YY_CURRENT_BUFFER )
| {
| /* Flush out information for old buffer. */
| *(yy_c_buf_p) = (yy_hold_char);
| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| YY_CURRENT_BUFFER_LVALUE = new_buffer;
| yy_load_buffer_state( );
|
| /* We don't actually know whether we did this switch during
| * EOF (yywrap()) processing, but the only time this flag
| * is looked at is after yywrap() is called, so it's safe
| * to go ahead and always set it.
| */
| (yy_did_buffer_switch_on_eof) = 1;
| }
|
| static void yy_load_buffer_state (void)
| {
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
| (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
| yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
| (yy_hold_char) = *(yy_c_buf_p);
| }
|
| /** Allocate and initialize an input buffer state.
| * @param file A readable stream.
| * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
| *
| * @return the allocated buffer state.
| */
| YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
| {
| YY_BUFFER_STATE b;
|
| b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
| if ( ! b )
| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
|
| b->yy_buf_size = size;
|
| /* yy_ch_buf has to be 2 characters longer than the size given because
| * we need to put in 2 end-of-buffer characters.
| */
| b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 );
| if ( ! b->yy_ch_buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
|
| b->yy_is_our_buffer = 1;
|
| yy_init_buffer(b,file );
|
| return b;
| }
|
| /** Destroy the buffer.
| * @param b a buffer created with yy_create_buffer()
| *
| */
| void yy_delete_buffer (YY_BUFFER_STATE b )
| {
|
| if ( ! b )
| return;
|
| if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
| YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
|
| if ( b->yy_is_our_buffer )
| yyfree((void *) b->yy_ch_buf );
|
| yyfree((void *) b );
| }
|
| #ifndef __cplusplus
| extern int isatty (int );
| #endif /* __cplusplus */
|
| /* Initializes or reinitializes a buffer.
| * This function is sometimes called more than once on the same buffer,
| * such as during a yyrestart() or at EOF.
| */
| static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
|
| {
| int oerrno = errno;
|
| yy_flush_buffer(b );
|
| b->yy_input_file = file;
| b->yy_fill_buffer = 1;
|
| /* If b is the current buffer, then yy_init_buffer was _probably_
| * called from yyrestart() or through yy_get_next_buffer.
| * In that case, we don't want to reset the lineno or column.
| */
| if (b != YY_CURRENT_BUFFER){
| b->yy_bs_lineno = 1;
| b->yy_bs_column = 0;
| }
|
| b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
|
| errno = oerrno;
| }
|
| /** Discard all buffered characters. On the next scan, YY_INPUT will be called.
| * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
| *
| */
| void yy_flush_buffer (YY_BUFFER_STATE b )
| {
| if ( ! b )
| return;
|
| b->yy_n_chars = 0;
|
| /* We always need two end-of-buffer characters. The first causes
| * a transition to the end-of-buffer state. The second causes
| * a jam in that state.
| */
| b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
| b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
|
| b->yy_buf_pos = &b->yy_ch_buf[0];
|
| b->yy_at_bol = 1;
| b->yy_buffer_status = YY_BUFFER_NEW;
|
| if ( b == YY_CURRENT_BUFFER )
| yy_load_buffer_state( );
| }
|
| /** Pushes the new state onto the stack. The new state becomes
| * the current state. This function will allocate the stack
| * if necessary.
| * @param new_buffer The new state.
| *
| */
| void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
| {
| if (new_buffer == NULL)
| return;
|
| yyensure_buffer_stack();
|
| /* This block is copied from yy_switch_to_buffer. */
| if ( YY_CURRENT_BUFFER )
| {
| /* Flush out information for old buffer. */
| *(yy_c_buf_p) = (yy_hold_char);
| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| /* Only push if top exists. Otherwise, replace top. */
| if (YY_CURRENT_BUFFER)
| (yy_buffer_stack_top)++;
| YY_CURRENT_BUFFER_LVALUE = new_buffer;
|
| /* copied from yy_switch_to_buffer. */
| yy_load_buffer_state( );
| (yy_did_buffer_switch_on_eof) = 1;
| }
|
| /** Removes and deletes the top of the stack, if present.
| * The next element becomes the new top.
| *
| */
| void yypop_buffer_state (void)
| {
| if (!YY_CURRENT_BUFFER)
| return;
|
| yy_delete_buffer(YY_CURRENT_BUFFER );
| YY_CURRENT_BUFFER_LVALUE = NULL;
| if ((yy_buffer_stack_top) > 0)
| --(yy_buffer_stack_top);
|
| if (YY_CURRENT_BUFFER) {
| yy_load_buffer_state( );
| (yy_did_buffer_switch_on_eof) = 1;
| }
| }
|
| /* Allocates the stack if it does not exist.
| * Guarantees space for at least one push.
| */
| static void yyensure_buffer_stack (void)
| {
| int num_to_alloc;
|
| if (!(yy_buffer_stack)) {
|
| /* First allocation is just for 2 elements, since we don't know if this
| * scanner will even need a stack. We use 2 instead of 1 to avoid an
| * immediate realloc on the next call.
| */
| num_to_alloc = 1;
| (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
| (num_to_alloc * sizeof(struct yy_buffer_state*)
| );
| if ( ! (yy_buffer_stack) )
| YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
|
| memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
|
| (yy_buffer_stack_max) = num_to_alloc;
| (yy_buffer_stack_top) = 0;
| return;
| }
|
| if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
|
| /* Increase the buffer to prepare for a possible push. */
| int grow_size = 8 /* arbitrary grow size */;
|
| num_to_alloc = (yy_buffer_stack_max) + grow_size;
| (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
| ((yy_buffer_stack),
| num_to_alloc * sizeof(struct yy_buffer_state*)
| );
| if ( ! (yy_buffer_stack) )
| YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
|
| /* zero only the new slots.*/
| memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
| (yy_buffer_stack_max) = num_to_alloc;
| }
| }
|
| /** Setup the input buffer state to scan directly from a user-specified character buffer.
| * @param base the character buffer
| * @param size the size in bytes of the character buffer
| *
| * @return the newly allocated buffer state object.
| */
| YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
| {
| YY_BUFFER_STATE b;
|
| if ( size < 2 ||
| base[size-2] != YY_END_OF_BUFFER_CHAR ||
| base[size-1] != YY_END_OF_BUFFER_CHAR )
| /* They forgot to leave room for the EOB's. */
| return 0;
|
| b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
| if ( ! b )
| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
|
| b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
| b->yy_buf_pos = b->yy_ch_buf = base;
| b->yy_is_our_buffer = 0;
| b->yy_input_file = 0;
| b->yy_n_chars = b->yy_buf_size;
| b->yy_is_interactive = 0;
| b->yy_at_bol = 1;
| b->yy_fill_buffer = 0;
| b->yy_buffer_status = YY_BUFFER_NEW;
|
| yy_switch_to_buffer(b );
|
| return b;
| }
|
| /** Setup the input buffer state to scan a string. The next call to yylex() will
| * scan from a @e copy of @a str.
| * @param yystr a NUL-terminated string to scan
| *
| * @return the newly allocated buffer state object.
| * @note If you want to scan bytes that may contain NUL values, then use
| * yy_scan_bytes() instead.
| */
| YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
| {
|
| return yy_scan_bytes(yystr,strlen(yystr) );
| }
|
| /** Setup the input buffer state to scan the given bytes. The next call to yylex() will
| * scan from a @e copy of @a bytes.
| * @param bytes the byte buffer to scan
| * @param len the number of bytes in the buffer pointed to by @a bytes.
| *
| * @return the newly allocated buffer state object.
| */
| YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len )
| {
| YY_BUFFER_STATE b;
| char *buf;
| yy_size_t n;
| int i;
|
| /* Get memory for full buffer, including space for trailing EOB's. */
| n = _yybytes_len + 2;
| buf = (char *) yyalloc(n );
| if ( ! buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
|
| for ( i = 0; i < _yybytes_len; ++i )
| buf[i] = yybytes[i];
|
| buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
|
| b = yy_scan_buffer(buf,n );
| if ( ! b )
| YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
|
| /* It's okay to grow etc. this buffer, and we should throw it
| * away when we're done.
| */
| b->yy_is_our_buffer = 1;
|
| return b;
| }
|
| #ifndef YY_EXIT_FAILURE
| #define YY_EXIT_FAILURE 2
| #endif
|
| static void yy_fatal_error (yyconst char* msg )
| {
| (void) fprintf( stderr, "%s\n", msg );
| exit( YY_EXIT_FAILURE );
| }
|
| /* Redefine yyless() so it works in section 3 code. */
|
| #undef yyless
| #define yyless(n) \
| do \
| { \
| /* Undo effects of setting up yytext. */ \
| int yyless_macro_arg = (n); \
| YY_LESS_LINENO(yyless_macro_arg);\
| yytext[yyleng] = (yy_hold_char); \
| (yy_c_buf_p) = yytext + yyless_macro_arg; \
| (yy_hold_char) = *(yy_c_buf_p); \
| *(yy_c_buf_p) = '\0'; \
| yyleng = yyless_macro_arg; \
| } \
| while ( 0 )
|
| /* Accessor methods (get/set functions) to struct members. */
|
| /** Get the current line number.
| *
| */
| int yyget_lineno (void)
| {
|
| return yylineno;
| }
|
| /** Get the input stream.
| *
| */
| FILE *yyget_in (void)
| {
| return yyin;
| }
|
| /** Get the output stream.
| *
| */
| FILE *yyget_out (void)
| {
| return yyout;
| }
|
| /** Get the length of the current token.
| *
| */
| int yyget_leng (void)
| {
| return yyleng;
| }
|
| /** Get the current token.
| *
| */
|
| char *yyget_text (void)
| {
| return yytext;
| }
|
| /** Set the current line number.
| * @param line_number
| *
| */
| void yyset_lineno (int line_number )
| {
|
| yylineno = line_number;
| }
|
| /** Set the input stream. This does not discard the current
| * input buffer.
| * @param in_str A readable stream.
| *
| * @see yy_switch_to_buffer
| */
| void yyset_in (FILE * in_str )
| {
| yyin = in_str ;
| }
|
| void yyset_out (FILE * out_str )
| {
| yyout = out_str ;
| }
|
| int yyget_debug (void)
| {
| return yy_flex_debug;
| }
|
| void yyset_debug (int bdebug )
| {
| yy_flex_debug = bdebug ;
| }
|
| static int yy_init_globals (void)
| {
| /* Initialization is the same as for the non-reentrant scanner.
| * This function is called from yylex_destroy(), so don't allocate here.
| */
|
| (yy_buffer_stack) = 0;
| (yy_buffer_stack_top) = 0;
| (yy_buffer_stack_max) = 0;
| (yy_c_buf_p) = (char *) 0;
| (yy_init) = 0;
| (yy_start) = 0;
|
| (yy_state_buf) = 0;
| (yy_state_ptr) = 0;
| (yy_full_match) = 0;
| (yy_lp) = 0;
|
| /* Defined in main.c */
| #ifdef YY_STDINIT
| yyin = stdin;
| yyout = stdout;
| #else
| yyin = (FILE *) 0;
| yyout = (FILE *) 0;
| #endif
|
| /* For future reference: Set errno on error, since we are called by
| * yylex_init()
| */
| return 0;
| }
|
| /* yylex_destroy is for both reentrant and non-reentrant scanners. */
| int yylex_destroy (void)
| {
|
| /* Pop the buffer stack, destroying each element. */
| while(YY_CURRENT_BUFFER){
| yy_delete_buffer(YY_CURRENT_BUFFER );
| YY_CURRENT_BUFFER_LVALUE = NULL;
| yypop_buffer_state();
| }
|
| /* Destroy the stack itself. */
| yyfree((yy_buffer_stack) );
| (yy_buffer_stack) = NULL;
|
| yyfree ( (yy_state_buf) );
| (yy_state_buf) = NULL;
|
| /* Reset the globals. This is important in a non-reentrant scanner so the next time
| * yylex() is called, initialization will occur. */
| yy_init_globals( );
|
| return 0;
| }
|
| /*
| * Internal utility routines.
| */
|
| #ifndef yytext_ptr
| static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
| {
| register int i;
| for ( i = 0; i < n; ++i )
| s1[i] = s2[i];
| }
| #endif
|
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen (yyconst char * s )
| {
| register int n;
| for ( n = 0; s[n]; ++n )
| ;
|
| return n;
| }
| #endif
|
| void *yyalloc (yy_size_t size )
| {
| return (void *) malloc( size );
| }
|
| void *yyrealloc (void * ptr, yy_size_t size )
| {
| /* The cast to (char *) in the following accommodates both
| * implementations that use char* generic pointers, and those
| * that use void* generic pointers. It works with the latter
| * because both ANSI C and C++ allow castless assignment from
| * any pointer type to void*, and deal with argument conversions
| * as though doing an assignment.
| */
| return (void *) realloc( (char *) ptr, size );
| }
|
| void yyfree (void * ptr )
| {
| free( (char *) ptr ); /* see yyrealloc() for (char *) cast */
| }
|
| #define YYTABLES_NAME "yytables"
|
| #line 9 "conftest.l"
|
|
| #ifdef YYTEXT_POINTER
| extern char *yytext;
| #endif
| int
| main (void)
| {
| return ! yylex () + ! yywrap ();
| }
configure:20077: result: no
configure:20094: checking for byacc
configure:20112: found /usr/bin/byacc
configure:20125: result: /usr/bin/byacc
configure:20163: checking for unzip
configure:20181: found /usr/local/bin/unzip
configure:20194: result: /usr/local/bin/unzip
configure:20299: checking for sdl-config
configure:20317: found /usr/local/bin/sdl-config
configure:20330: result: /usr/local/bin/sdl-config
configure:20339: checking for SDL - version >= 0.11.0
configure:20436: g++ -o conftest -g -O2 -I/usr/local/include/SDL -I/usr/local/include -D_GNU_SOURCE=1 -D_REENTRANT conftest.cpp -L/usr/local/lib -Wl,-rpath,/usr/local/lib -lSDL -pthread >&5
conftest.cpp: In function 'int main(int, char**)':
conftest.cpp:55: warning: deprecated conversion from string constant to 'char*'
configure:20440: $? = 0
configure:20446: ./conftest
configure:20450: $? = 0
configure:20472: result: yes
configure:20580: checking SDL/SDL_ffmpeg.h usability
configure:20597: g++ -c -g -O2 conftest.cpp >&5
conftest.cpp:55:28: error: SDL/SDL_ffmpeg.h: No such file or directory
configure:20604: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "ctp2"
| #define PACKAGE_TARNAME "ctp2"
| #define PACKAGE_VERSION "1.2"
| #define PACKAGE_STRING "ctp2 1.2"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "ctp2"
| #define VERSION "1.2"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define AUTOMAKE_INVOKES_YACC 1
| /* end confdefs.h. */
| #include <stdio.h>
| #ifdef HAVE_SYS_TYPES_H
| # include <sys/types.h>
| #endif
| #ifdef HAVE_SYS_STAT_H
| # include <sys/stat.h>
| #endif
| #ifdef STDC_HEADERS
| # include <stdlib.h>
| # include <stddef.h>
| #else
| # ifdef HAVE_STDLIB_H
| # include <stdlib.h>
| # endif
| #endif
| #ifdef HAVE_STRING_H
| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| # include <memory.h>
| # endif
| # include <string.h>
| #endif
| #ifdef HAVE_STRINGS_H
| # include <strings.h>
| #endif
| #ifdef HAVE_INTTYPES_H
| # include <inttypes.h>
| #endif
| #ifdef HAVE_STDINT_H
| # include <stdint.h>
| #endif
| #ifdef HAVE_UNISTD_H
| # include <unistd.h>
| #endif
| #include <SDL/SDL_ffmpeg.h>
configure:20618: result: no
configure:20622: checking SDL/SDL_ffmpeg.h presence
configure:20637: g++ -E conftest.cpp
conftest.cpp:22:28: error: SDL/SDL_ffmpeg.h: No such file or directory
configure:20644: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "ctp2"
| #define PACKAGE_TARNAME "ctp2"
| #define PACKAGE_VERSION "1.2"
| #define PACKAGE_STRING "ctp2 1.2"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "ctp2"
| #define VERSION "1.2"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define AUTOMAKE_INVOKES_YACC 1
| /* end confdefs.h. */
| #include <SDL/SDL_ffmpeg.h>
configure:20658: result: no
configure:20686: checking for SDL/SDL_ffmpeg.h
configure:20693: result: no
configure:20717: checking for X
configure:20957: result: libraries /usr/local/lib, headers /usr/local/include
configure:20979: checking whether -R must be followed by a space
configure:21005: g++ -o conftest -g -O2 conftest.cpp -R/usr/local/lib >&5
configure:21012: $? = 0
configure:21020: result: no
configure:21126: g++ -o conftest -g -O2 conftest.cpp -L/usr/local/lib -R/usr/local/lib -lX11 >&5
configure:21133: $? = 0
configure:21301: checking for gethostbyname
configure:21357: g++ -o conftest -g -O2 conftest.cpp >&5
configure:21364: $? = 0
configure:21384: result: yes
configure:21537: checking for connect
configure:21593: g++ -o conftest -g -O2 conftest.cpp >&5
configure:21600: $? = 0
configure:21620: result: yes
configure:21696: checking for remove
configure:21752: g++ -o conftest -g -O2 conftest.cpp >&5
configure:21759: $? = 0
configure:21779: result: yes
configure:21855: checking for shmat
configure:21911: g++ -o conftest -g -O2 conftest.cpp >&5
configure:21918: $? = 0
configure:21938: result: yes
configure:22023: checking for IceConnectionNumber in -lICE
configure:22058: g++ -o conftest -g -O2 -L/usr/local/lib conftest.cpp -lICE >&5
configure:22065: $? = 0
configure:22086: result: yes
configure:22103: checking whether byte ordering is bigendian
configure:22128: g++ -c -g -O2 conftest.cpp >&5
conftest.cpp:24: error: 'neither' does not name a type
configure:22135: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "ctp2"
| #define PACKAGE_TARNAME "ctp2"
| #define PACKAGE_VERSION "1.2"
| #define PACKAGE_STRING "ctp2 1.2"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "ctp2"
| #define VERSION "1.2"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define AUTOMAKE_INVOKES_YACC 1
| #define USE_SDL 1
| /* end confdefs.h. */
| #if ! (defined __BIG_ENDIAN__ || defined __LITTLE_ENDIAN__)
| neither is defined;
| #endif
| typedef int dummy;
|
configure:22179: g++ -c -g -O2 conftest.cpp >&5
configure:22186: $? = 0
configure:22218: g++ -c -g -O2 conftest.cpp >&5
conftest.cpp: In function 'int main()':
conftest.cpp:30: error: 'big' was not declared in this scope
conftest.cpp:30: error: expected `;' before 'endian'
configure:22225: $? = 1
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "ctp2"
| #define PACKAGE_TARNAME "ctp2"
| #define PACKAGE_VERSION "1.2"
| #define PACKAGE_STRING "ctp2 1.2"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE "ctp2"
| #define VERSION "1.2"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define AUTOMAKE_INVOKES_YACC 1
| #define USE_SDL 1
| /* end confdefs.h. */
| #include <sys/types.h>
| #include <sys/param.h>
|
| int
| main ()
| {
| #if BYTE_ORDER != BIG_ENDIAN
| not big endian
| #endif
|
| ;
| return 0;
| }
configure:22477: result: no
configure:22624: checking sys/param.h usability
configure:22641: g++ -c -g -O2 conftest.cpp >&5
configure:22648: $? = 0
configure:22662: result: yes
configure:22666: checking sys/param.h presence
configure:22681: g++ -E conftest.cpp
configure:22688: $? = 0
configure:22702: result: yes
configure:22730: checking for sys/param.h
configure:22739: result: yes
configure:22771: checking for htlatex
configure:22804: result: no
configure:22811: checking for makeindex
configure:22829: found /usr/local/bin/makeindex
configure:22841: result: /usr/local/bin/makeindex
configure:22851: checking for pdflatex
configure:22869: found /usr/local/bin/pdflatex
configure:22881: result: /usr/local/bin/pdflatex
configure:22891: checking for perl
configure:22909: found /usr/local/bin/perl
configure:22921: result: /usr/local/bin/perl
configure:22931: checking for thumbpdf
configure:22949: found /usr/local/bin/thumbpdf
configure:22961: result: /usr/local/bin/thumbpdf
configure:22973: checking for acroread
configure:22991: found /usr/local/bin/acroread
configure:23003: result: /usr/local/bin/acroread
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=i386-unknown-freebsd8.0
ac_cv_c_bigendian=no
ac_cv_c_compiler_gnu=yes
ac_cv_cxx_compiler_gnu=yes
ac_cv_env_CCC_set=''
ac_cv_env_CCC_value=''
ac_cv_env_CC_set=''
ac_cv_env_CC_value=''
ac_cv_env_CFLAGS_set=''
ac_cv_env_CFLAGS_value=''
ac_cv_env_CPPFLAGS_set=''
ac_cv_env_CPPFLAGS_value=''
ac_cv_env_CPP_set=''
ac_cv_env_CPP_value=''
ac_cv_env_CXXCPP_set=''
ac_cv_env_CXXCPP_value=''
ac_cv_env_CXXFLAGS_set=''
ac_cv_env_CXXFLAGS_value=''
ac_cv_env_CXX_set=''
ac_cv_env_CXX_value=''
ac_cv_env_F77_set=''
ac_cv_env_F77_value=''
ac_cv_env_FFLAGS_set=''
ac_cv_env_FFLAGS_value=''
ac_cv_env_LDFLAGS_set=''
ac_cv_env_LDFLAGS_value=''
ac_cv_env_LIBS_set=''
ac_cv_env_LIBS_value=''
ac_cv_env_XMKMF_set=''
ac_cv_env_XMKMF_value=''
ac_cv_env_build_alias_set=''
ac_cv_env_build_alias_value=''
ac_cv_env_host_alias_set=''
ac_cv_env_host_alias_value=''
ac_cv_env_target_alias_set=''
ac_cv_env_target_alias_value=''
ac_cv_f77_compiler_gnu=no
ac_cv_func_connect=yes
ac_cv_func_gethostbyname=yes
ac_cv_func_remove=yes
ac_cv_func_shmat=yes
ac_cv_have_x='have_x=yes ac_x_includes='\''/usr/local/include'\'' ac_x_libraries='\''/usr/local/lib'\'''
ac_cv_header_SDL_SDL_ffmpeg_h=no
ac_cv_header_dlfcn_h=yes
ac_cv_header_inttypes_h=yes
ac_cv_header_memory_h=yes
ac_cv_header_stdc=yes
ac_cv_header_stdint_h=yes
ac_cv_header_stdlib_h=yes
ac_cv_header_string_h=yes
ac_cv_header_strings_h=yes
ac_cv_header_sys_param_h=yes
ac_cv_header_sys_stat_h=yes
ac_cv_header_sys_types_h=yes
ac_cv_header_unistd_h=yes
ac_cv_host=i386-unknown-freebsd8.0
ac_cv_lib_ICE_IceConnectionNumber=yes
ac_cv_lib_lex='none needed'
ac_cv_objext=o
ac_cv_path_EGREP='/usr/bin/grep -E'
ac_cv_path_GREP=/usr/bin/grep
ac_cv_path_MAKEINDEX=/usr/local/bin/makeindex
ac_cv_path_PDFLATEX=/usr/local/bin/pdflatex
ac_cv_path_PERL=/usr/local/bin/perl
ac_cv_path_SDL_CONFIG=/usr/local/bin/sdl-config
ac_cv_path_THUMBPDF=/usr/local/bin/thumbpdf
ac_cv_path_UNZIP=/usr/local/bin/unzip
ac_cv_path_VIEWPDF=/usr/local/bin/acroread
ac_cv_path_YACC=/usr/bin/byacc
ac_cv_path_install='/usr/local/bin/ginstall -c'
ac_cv_path_mkdir=/usr/local/bin/gmkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_CPP='gcc -E'
ac_cv_prog_CXXCPP='g++ -E'
ac_cv_prog_LEX=flex
ac_cv_prog_ac_ct_AR=ar
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_ac_ct_CXX=g++
ac_cv_prog_ac_ct_RANLIB=ranlib
ac_cv_prog_ac_ct_STRIP=strip
ac_cv_prog_cc_c89=''
ac_cv_prog_cc_g=yes
ac_cv_prog_cxx_g=yes
ac_cv_prog_f77_g=no
ac_cv_prog_lex_root=lex.yy
ac_cv_prog_lex_yytext_pointer=no
ac_cv_prog_make_make_set=yes
ac_cv_target=i386-unknown-freebsd8.0
am_cv_CC_dependencies_compiler_type=gcc3
am_cv_CXX_dependencies_compiler_type=gcc3
lt_cv_deplibs_check_method=pass_all
lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=''
lt_cv_ld_reload_flag=-r
lt_cv_objdir=.libs
lt_cv_path_LD=/usr/bin/ld
lt_cv_path_LDCXX=/usr/bin/ld
lt_cv_path_NM='/usr/bin/nm -B'
lt_cv_path_SED=/usr/bin/sed
lt_cv_prog_compiler_c_o=yes
lt_cv_prog_compiler_c_o_CXX=yes
lt_cv_prog_compiler_pic_works=yes
lt_cv_prog_compiler_pic_works_CXX=yes
lt_cv_prog_compiler_rtti_exceptions=no
lt_cv_prog_compiler_static_works=yes
lt_cv_prog_compiler_static_works_CXX=yes
lt_cv_prog_gnu_ld=yes
lt_cv_prog_gnu_ldcxx=yes
lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'''
lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr) \&\2},/p'\'''
lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^. .* \(.*\)$/extern int \1;/p'\'''
lt_cv_sys_lib_dlsearch_path_spec='/lib /usr/lib'
lt_cv_sys_lib_search_path_spec=/usr/lib
lt_cv_sys_max_cmd_len=196608
lt_lt_cv_prog_compiler_c_o='"yes"'
lt_lt_cv_prog_compiler_c_o_CXX='"yes"'
lt_lt_cv_sys_global_symbol_pipe='"sed -n -e '\''s/^.*[ ]\\([ABCDGIRSTW][ABCDGIRSTW]*\\)[ ][ ]*\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2 \\2/p'\''"'
lt_lt_cv_sys_global_symbol_to_c_name_address='"sed -n -e '\''s/^: \\([^ ]*\\) \$/ {\\\"\\1\\\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/ {\"\\2\", (lt_ptr) \\&\\2},/p'\''"'
lt_lt_cv_sys_global_symbol_to_cdecl='"sed -n -e '\''s/^. .* \\(.*\\)\$/extern int \\1;/p'\''"'
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL='${SHELL} /usr/ports/games/ctp2/ctp2_code/os/autoconf/config/missing --run aclocal-1.10'
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='${SHELL} /usr/ports/games/ctp2/ctp2_code/os/autoconf/config/missing --run tar'
AR='ar'
AUTOCONF='${SHELL} /usr/ports/games/ctp2/ctp2_code/os/autoconf/config/missing --run autoconf'
AUTOHEADER='${SHELL} /usr/ports/games/ctp2/ctp2_code/os/autoconf/config/missing --run autoheader'
AUTOMAKE='${SHELL} /usr/ports/games/ctp2/ctp2_code/os/autoconf/config/missing --run automake-1.10'
AWK='gawk'
CC='gcc'
CCDEPMODE='depmode=gcc3'
CFLAGS='-g -O2'
CPP='gcc -E'
CPPFLAGS=''
CTP2_ENABLE_SLICDEBUG=''
CTP2_NOWIN32_INC=''
CXX='g++'
CXXCPP='g++ -E'
CXXDEPMODE='depmode=gcc3'
CXXFLAGS='-g -O2'
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
DIRECTX_INCLUDES=''
DIRECTX_LDADD=''
DIRECTX_SDKDIR=''
DSYMUTIL=''
DXMEDIA_INCLUDES=''
DXMEDIA_LDADD=''
DXMEDIA_SDKDIR=''
ECHO='echo'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP='/usr/bin/grep -E'
EXEEXT=''
F77=''
FFLAGS=''
GREP='/usr/bin/grep'
HTLATEX=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
INTERNAL_ANET_FALSE=''
INTERNAL_ANET_TRUE=''
LDFLAGS=''
LEX='flex'
LEXLIB=''
LEX_OUTPUT_ROOT='lex.yy'
LIBOBJS=''
LIBS=''
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
LINUX_FALSE=''
LINUX_TRUE='#'
LN_S='ln -s'
LTLIBOBJS=''
MAINT='#'
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE='#'
MAKEINDEX='/usr/local/bin/makeindex'
MAKEINFO='${SHELL} /usr/ports/games/ctp2/ctp2_code/os/autoconf/config/missing --run makeinfo'
MKDIR_P='/usr/local/bin/gmkdir -p'
NMEDIT=''
OBJEXT='o'
PACKAGE='ctp2'
PACKAGE_BUGREPORT=''
PACKAGE_NAME='ctp2'
PACKAGE_STRING='ctp2 1.2'
PACKAGE_TARNAME='ctp2'
PACKAGE_VERSION='1.2'
PATH_SEPARATOR=':'
PDFLATEX='/usr/local/bin/pdflatex'
PERL='/usr/local/bin/perl'
RANLIB='ranlib'
SDL_CFLAGS='-I/usr/local/include/SDL -I/usr/local/include -D_GNU_SOURCE=1 -D_REENTRANT'
SDL_CONFIG='/usr/local/bin/sdl-config'
SDL_FFMPEG_LDFLAGS=''
SDL_LIBS='-L/usr/local/lib -Wl,-rpath,/usr/local/lib -lSDL -pthread'
SED='/usr/bin/sed'
SET_MAKE=''
SHELL='/bin/sh'
STRIP='strip'
THUMBPDF='/usr/local/bin/thumbpdf'
UNZIP='/usr/local/bin/unzip'
VERSION='1.2'
VIEWPDF='/usr/local/bin/acroread'
WIN32_FALSE=''
WIN32_TRUE='#'
XMKMF=''
X_CFLAGS=' -I/usr/local/include'
X_EXTRA_LIBS=''
X_LIBS=' -L/usr/local/lib -R/usr/local/lib'
X_PRE_LIBS=' -lSM -lICE'
YACC='/usr/bin/byacc'
YFLAGS='-d -v'
_BFR_=''
ac_ct_CC='gcc'
ac_ct_CXX='g++'
ac_ct_F77=''
am__fastdepCC_FALSE='#'
am__fastdepCC_TRUE=''
am__fastdepCXX_FALSE='#'
am__fastdepCXX_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__quote=''
am__tar='${AMTAR} chof - "$$tardir"'
am__untar='${AMTAR} xf -'
bindir='/home/foo/CTP2/ctp2_program/ctp'
build='i386-unknown-freebsd8.0'
build_alias=''
build_cpu='i386'
build_os='freebsd8.0'
build_vendor='unknown'
ctp2_code=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host='i386-unknown-freebsd8.0'
host_alias=''
host_cpu='i386'
host_os='freebsd8.0'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='$(SHELL) /usr/ports/games/ctp2/ctp2_code/os/autoconf/config/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='/usr/local/bin/gmkdir -p'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/home/huff/CTP2'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
subdirs=''
sysconfdir='${prefix}/etc'
target='i386-unknown-freebsd8.0'
target_alias=''
target_cpu='i386'
target_os='freebsd8.0'
target_vendor='unknown'
## ----------- ##
## confdefs.h. ##
## ----------- ##
#define PACKAGE_NAME "ctp2"
#define PACKAGE_TARNAME "ctp2"
#define PACKAGE_VERSION "1.2"
#define PACKAGE_STRING "ctp2 1.2"
#define PACKAGE_BUGREPORT ""
#define PACKAGE "ctp2"
#define VERSION "1.2"
#define STDC_HEADERS 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_SYS_STAT_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STRING_H 1
#define HAVE_MEMORY_H 1
#define HAVE_STRINGS_H 1
#define HAVE_INTTYPES_H 1
#define HAVE_STDINT_H 1
#define HAVE_UNISTD_H 1
#define HAVE_DLFCN_H 1
#define AUTOMAKE_INVOKES_YACC 1
#define USE_SDL 1
#define FILE_SEP "/"
#define FILE_SEPC '/'
#define MAX_PATH PATH_MAX
#define _MAX_PATH PATH_MAX
#define PATH_SEP ":"
#define PATH_SEPC ':'
#define HAVE_SYS_PARAM_H 1
#define USE_COM_REPLACEMENT 1
#define YYDEBUG 9
configure: exit 2
More information about the freebsd-ports
mailing list