httprint

[Gregory W. MacPherson]

Wah! It died when I ran it!! Since I do not have source, I cannot
compile with debugging symbols etc. Sorry - hope you can identify what
went wrong. Want to consider porting the source?

evil# uname -a
FreeBSD evil.netpublishing.com 7.2-STABLE FreeBSD 7.2-STABLE #0: Tue Aug
4 11:51:26 PDT 2009
root at evil.netpublishing.com:/usr/obj/usr/src/sys/ASUS  i386
evil# dmesg
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-STABLE #0: Tue Aug  4 11:51:26 PDT 2009
    root at evil.netpublishing.com:/usr/obj/usr/src/sys/ASUS
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) M processor          900MHz (900.10-MHz
686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8

Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  AMD Features=0x100000<NX>
real memory  = 1064828928 (1015 MB)
avail memory = 1032794112 (984 MB)
ACPI APIC Table: <A M I  OEMAPIC >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3f700000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xec00-0xec07 mem
0xf7f00000-0xf7f7ffff,0xd0000000-0xdfffffff,0xf7ec0000-0xf7efffff irq 16
at device 2.0 on pci0
acpi_video0: <ACPI video extension> on vgapci0
agp0: <Intel 82915GM (915GM GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xf7f80000-0xf7ffffff at device
2.1 on pci0
hdac0: <Intel 82801F High Definition Audio Controller> mem
0xf7eb8000-0xf7ebbfff irq 16 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090624_0136
hdac0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
ae0: <Attansic Technology Corp, L2 FastEthernet> mem
0xfbfc0000-0xfbffffff irq 17 at device 0.0 on pci3
ae0: Using MSI messages.
miibus0: <MII bus> on ae0
atphy0: <Atheros F2 10/100 PHY> PHY 0 on miibus0
atphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ae0: Ethernet address: 00:22:15:f9:50:69
ae0: [FILTER]
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci1: <ACPI PCI bus> on pcib3
ath0: <Atheros 5424/2424> mem 0xfbef0000-0xfbefffff irq 18 at device 0.0
on pci1
ath0: [ITHREAD]
ath0: WARNING: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:15:af:ec:f5:34
ath0: mac 14.2 phy 7.0 radio 10.2
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port
0xe400-0xe41f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port
0xe480-0xe49f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port
0xe800-0xe81f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port
0xe880-0xe89f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6M SATA150 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_asus0: <ASUS EeePC> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
speaker0: <PC speaker> port 0x61 on acpi0
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
umass0: <ENE UB6225, class 0/0, rev 2.00/1.00, addr 2> on uhub2
ugen0: <vendor 0x05e3 USB 2.0 Camera, class 239/2, rev 2.00/2.27, addr
2> on uhub3
Timecounter "TSC" frequency 900099529 Hz quality 800
Timecounters tick every 10.000 msec
WARNING: apm_saver module requires apm enabled
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based
forwarding enabled, default to deny, logging disabled
ad2: FAILURE - SET_MULTI status=51<READY,DSC,ERROR> error=4<ABORTED>
ad2: 15391MB <ASUS-PHISON SSD TST2.04U> at ata1-master UDMA66
hdac0: HDA Codec #0: Realtek ALC662
pcm0: <HDA Realtek ALC662 PCM #0 Analog> at cad 0 nid 1 on hdac0
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have
changed
(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB2.0 CardReader SD0 0100> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 974MB (1995776 512 byte sectors: 64H 32S/T 974C)
Trying to mount root from ufs:/dev/ad2s1a
ath0: permanently promiscuous mode enabled
ath0: permanently promiscuous mode disabled
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...1 1 0 0 0 done
All buffers synced.
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-STABLE #0: Tue Aug  4 11:51:26 PDT 2009
    root at evil.netpublishing.com:/usr/obj/usr/src/sys/ASUS
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) M processor          900MHz (900.10-MHz
686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8

Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  AMD Features=0x100000<NX>
real memory  = 1064828928 (1015 MB)
avail memory = 1032794112 (984 MB)
ACPI APIC Table: <A M I  OEMAPIC >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3f700000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xec00-0xec07 mem
0xf7f00000-0xf7f7ffff,0xd0000000-0xdfffffff,0xf7ec0000-0xf7efffff irq 16
at device 2.0 on pci0
acpi_video0: <ACPI video extension> on vgapci0
agp0: <Intel 82915GM (915GM GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xf7f80000-0xf7ffffff at device
2.1 on pci0
hdac0: <Intel 82801F High Definition Audio Controller> mem
0xf7eb8000-0xf7ebbfff irq 16 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090624_0136
hdac0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
ae0: <Attansic Technology Corp, L2 FastEthernet> mem
0xfbfc0000-0xfbffffff irq 17 at device 0.0 on pci3
ae0: Using MSI messages.
miibus0: <MII bus> on ae0
atphy0: <Atheros F2 10/100 PHY> PHY 0 on miibus0
atphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ae0: Ethernet address: 00:22:15:f9:50:69
ae0: [FILTER]
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci1: <ACPI PCI bus> on pcib3
ath0: <Atheros 5424/2424> mem 0xfbef0000-0xfbefffff irq 18 at device 0.0
on pci1
ath0: [ITHREAD]
ath0: WARNING: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:15:af:ec:f5:34
ath0: mac 14.2 phy 7.0 radio 10.2
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port
0xe400-0xe41f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port
0xe480-0xe49f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port
0xe800-0xe81f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port
0xe880-0xe89f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6M SATA150 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_asus0: <ASUS EeePC> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
speaker0: <PC speaker> port 0x61 on acpi0
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
umass0: <ENE UB6225, class 0/0, rev 2.00/1.00, addr 2> on uhub2
ugen0: <vendor 0x05e3 USB 2.0 Camera, class 239/2, rev 2.00/2.27, addr
2> on uhub3
Timecounter "TSC" frequency 900096960 Hz quality 800
Timecounters tick every 10.000 msec
WARNING: apm_saver module requires apm enabled
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based
forwarding enabled, default to deny, logging disabled
ad2: FAILURE - SET_MULTI status=51<READY,DSC,ERROR> error=4<ABORTED>
ad2: 15391MB <ASUS-PHISON SSD TST2.04U> at ata1-master UDMA66
hdac0: HDA Codec #0: Realtek ALC662
pcm0: <HDA Realtek ALC662 PCM #0 Analog> at cad 0 nid 1 on hdac0
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have
changed
(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB2.0 CardReader SD0 0100> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 974MB (1995776 512 byte sectors: 64H 32S/T 974C)
Trying to mount root from ufs:/dev/ad2s1a
ath0: link state changed to DOWN
ath0: link state changed to UP
ath0: link state changed to DOWN
ath0: link state changed to UP
ath0: promiscuous mode disabled
ath0: promiscuous mode enabled
pid 6235 (httprint), uid 0: exited on signal 12 (core dumped)
pid 6965 (httprint), uid 0: exited on signal 12 (core dumped)
pid 6966 (httprint), uid 0: exited on signal 12 (core dumped)
pid 7030 (httprint), uid 0: exited on signal 12 (core dumped)
evil#

-- 
Gregory W. MacPherson
Global Network Exploitation Specialist, CISSP
http://www.datasieve.net/greg/

"In the beginning of a change, the patriot is a scarce man and brave,
hated and scorned. When his cause succeeds however, the timid join him,
for then it costs nothing to be a patriot." -- Mark Twain