-d 3ware,0 not working with 3ware 9550(sx)

[Sean Bruno]

I sent this over to the smartmontools mailing list, but thought I would 
post it here in case anyone else has run into this:


Using smartmontools 5.38 under FreeBSD 6/7 doesn't seem to work with the
following card:
twa0 at pci4:12:0: class=0x010400 card=0x100313c1 chip=0x100313c1 rev=0x00
hdr=0x00
    vendor     = '3ware
Inc.'
    device     = '9550SX/9590SE Series SATA2 Raid
Controller'
    class      = mass
storage
    subclass   = RAID

smartctl command output:
Source # smartctl -d3ware,0
/dev/da0
smartctl version 5.36 [i386-portbld-freebsd6.3] Copyright (C) 2002-6
Bruce Allen
Home page is
http://smartmontools.sourceforge.net/
 


Unrecognized escalade_type 4 in freebsd_3ware_command_interface(disk
0)
Please contact
smartmontools-support at lists.sourceforge.net
Unrecognized escalade_type 4 in freebsd_3ware_command_interface(disk
0)
Please contact
smartmontools-support at lists.sourceforge.net
Smartctl: Device Read Identity Failed (not an ATA/ATAPI
device)
 


A mandatory SMART command failed: exiting. To continue, add one or more
'-T per.
Source #

-- 
Sean Bruno
MiraLink Corporation
6015 NE 80th Ave, Ste 100
Portland, OR 97218
Phone 503-621-5143
Fax 503-621-5199
MSN: sbruno at miralink.com
Google:  seanwbruno at gmail.com
Yahoo:  sean_bruno at yahoo.com