ports/141660: X can't determine amount of video memory on a laptop with 4Gb
Olivier Certner
olivier.freebsd at free.fr
Wed Dec 16 00:10:05 UTC 2009
>Number: 141660
>Category: ports
>Synopsis: X can't determine amount of video memory on a laptop with 4Gb
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-ports-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Dec 16 00:10:05 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator: Olivier Certner
>Release: FreeBSD 7.2-STABLE amd64 as of 09/17/2009
>Organization:
>Environment:
FreeBSD 7.2-STABLE FreeBSD 7.2-STABLE #0: Tue Sep 22 11:27:58 CEST 2009 amd64
>Description:
X doesn't start on a Dell Latitude D630 laptop having 4 Gb of memory and a NVidia Quadro card when using the "nv" video driver. I'm running 7.2-STABLE. The same hardware configuration works perfectly if 2 Gb are removed from the laptop or if it boots on Mandriva Linux 2009.1 i686 (but it uses the NVidia proprietary driver). Here's the content of Xorg.0.log on FreeBSD:
****************
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.2-STABLE amd64
Current Operating System: FreeBSD horowitz 7.2-STABLE FreeBSD 7.2-STABLE #0: Tue Sep 22 11:27:58 CEST 2009 root at horowitz:/usr/obj/usr/src/sys/7_2_STABLE_09_09_17_IWN_NOUVEAU_HOROWITZ_2 amd64
Build Date: 29 September 2009 10:49:35AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 2 14:46:32 2009
(==) Using config file: "/usr/local/etc/X11/xorg.conf"
(==) ServerLayout "Olivier Certner's Home Desktop"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) `fonts.dir' not found (or not valid) in "/usr/local/lib/X11/fonts/local/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/local/lib/X11/fonts/local/").
(WW) The directory "/usr/local/lib/X11/fonts/TrueType/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/local/lib/X11/fonts/jmk/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/local/lib/X11/fonts/freefont-ttf/" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/75dpi/:unscaled,
/usr/local/lib/X11/fonts/100dpi/:unscaled,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/75dpi/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF/,
/usr/local/lib/X11/fonts/bitstream-vera/,
/usr/local/lib/X11/fonts/URW/,
/usr/local/lib/X11/fonts/cyrillic/,
/usr/local/lib/X11/fonts/webfonts/,
/usr/local/lib/X11/fonts/misc/,
/usr/local/share/ghostscript/fonts/,
/usr/local/share/apps/konsole/fonts/,
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/,
built-ins
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x3520
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(--) PCI:*(0 at 1:0:0) nVidia Corporation Quadro NVS 135M rev 161, Mem @ 0xf5000000/16777216, 0xf2000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/65536
(II) System resource ranges:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nv"
(II) Loading /usr/local/lib/xorg/modules/drivers//nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.1.13
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS,
GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS,
GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE,
GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS,
GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS,
GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M,
GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
GeForce GTX 280, GeForce GTX 260, GeForce 8800 GTS 512,
GeForce 8800 GT, GeForce 9800 GX2, GeForce 8800 GS,
GeForce 8800M GTS, GeForce 8800M GTX, GeForce 8800 GS,
GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX,
GeForce 9800 GTK+, GeForce 9800 GT, Quadro FX 3700, Quadro FX 3600M,
GeForce 9600 GT, GeForce 9600 GS, GeForce 9800M GTS,
GeForce 9700M GTS, GeForce 9800M GTS, GeForce 9500 GT,
GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
GeForce 9500M G, GeForce 9300 GS, GeForce 8400 GS, GeForce 9300M GS,
GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M, Quadro NVS 160M
(II) Primary Device is: PCI 01 at 00:00:0
(--) NV: Found NVIDIA Quadro NVS 135M at 01 at 00:00:0
(II) resource ranges after probing:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/local/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Console is VGA mode 0x3
(==) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(==) NV(0): Using hardware cursor
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): MMIO registers mapped at 0x802800000
(EE) NV(0): Failed to determine the amount of available video memory
(II) UnloadModule: "nv"
(II) UnloadModule: "int10"
(II) Unloading /usr/local/lib/xorg/modules//libint10.so
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
****************
and on Linux:
****************
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux_2.6.22.18-server-1mdv Mandriva
Current Operating System: Linux localhost 2.6.31.5-desktop586-1mnb #1 SMP Fri Oct 23 00:21:26 EDT 2009 i686
Build Date: 13 October 2009 12:19:57PM
Before reporting problems, check http://qa.mandriva.com
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 3 07:28:10 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "monitor1"
(**) | |-->Device "device1"
(**) Option "DontZap" "False"
(**) Option "AllowMouseOpenFail"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
catalogue:/etc/X11/fontpath.d
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:042b:1028:01f9 nVidia Corporation Quadro NVS 135M rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf2000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded even though the default is to disable it.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/lib/xorg/modules/drivers//v4l_drv.so
(II) Module v4l: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 0.1.1
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension Multi-Buffering
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/extra-modules//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 185.18.36 Fri Aug 14 17:50:12 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/extra-modules//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) v4l driver for Video4Linux
(II) NVIDIA dlloader X Driver 185.18.36 Fri Aug 14 17:24:40 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01 at 00:00:0
(WW) Falling back to old probe method for v4l
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "AddARGBGLXVisuals"
(**) NVIDIA(0): Option "DynamicTwinView" "false"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU Quadro NVS 135M (G86) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 60.86.68.00.16
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on Quadro NVS 135M at PCI:1:0:0:
(--) NVIDIA(0): LPL (DFP-0)
(--) NVIDIA(0): LPL (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(WW) NVIDIA(0): No valid modes for "1280x800"; removing.
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1440x900"
(II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
(--) NVIDIA(0): DPI set to (121, 120); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "1440x900"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "compose:rwin"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event7"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "compose:rwin"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event6"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "compose:rwin"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event4"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "compose:rwin"
(II) config/hal: Adding input device AlpsPS/2 ALPS DualPoint TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event2"
(II) AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 767
(II) AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
(II) AlpsPS/2 ALPS DualPoint TouchPad: finger width range 0 - 0
(II) AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle
(--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
(**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD)
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) filter chain progression: 2.00
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) filter stage 0: 20.00 ms
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) set acceleration profile 0
(--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
(II) config/hal: Adding input device DualPoint Stick
(**) DualPoint Stick: always reports core events
(**) DualPoint Stick: Device: "/dev/input/event1"
(II) DualPoint Stick: Found 3 mouse buttons
(II) DualPoint Stick: Found x and y relative axes
(II) DualPoint Stick: Configuring as mouse
(**) DualPoint Stick: YAxisMapping: buttons 4 and 5
(**) DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE)
(**) DualPoint Stick: (accel) keeping acceleration scheme 1
(**) DualPoint Stick: (accel) filter chain progression: 2.00
(**) DualPoint Stick: (accel) filter stage 0: 20.00 ms
(**) DualPoint Stick: (accel) set acceleration profile 0
(II) DualPoint Stick: initialized for relative axes.
****************
For completeness, here is the output of dmesg under FreeBSD on a verbose boot:
****************
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-STABLE #0: Tue Sep 22 11:27:58 CEST 2009
root at horowitz:/usr/obj/usr/src/sys/7_2_STABLE_09_09_17_IWN_NOUVEAU_HOROWITZ_2
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff807eb000.
Preloaded elf obj module "/boot/kernel/geom_eli.ko" at 0xffffffff807eb210.
Preloaded elf obj module "/boot/kernel/crypto.ko" at 0xffffffff807eb880.
Preloaded elf obj module "/boot/kernel/zlib.ko" at 0xffffffff807ebee8.
Preloaded elf obj module "/boot/kernel/linux.ko" at 0xffffffff807ec450.
Preloaded elf obj module "/boot/kernel/snd_hda.ko" at 0xffffffff807ecbb8.
Preloaded elf obj module "/boot/kernel/sound.ko" at 0xffffffff807ed1a0.
Preloaded elf obj module "/boot/kernel/ukbd.ko" at 0xffffffff807ed808.
Preloaded elf obj module "/boot/kernel/ums.ko" at 0xffffffff807eddb0.
Preloaded elf obj module "/boot/kernel/umass.ko" at 0xffffffff807ee298.
Preloaded elf obj module "/boot/kernel/atapicam.ko" at 0xffffffff807ee800.
Preloaded elf obj module "/boot/kernel/ichsmb.ko" at 0xffffffff807eedf0.
Preloaded elf obj module "/boot/kernel/smbus.ko" at 0xffffffff807ef318.
Calibrating clock(s) ... i8254 clock: 1192046 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2394019524 Hz
CPU: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz (2394.02-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
Cores per package: 2
usable memory = 4285353984 (4086 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x000000000081d000 - 0x00000000d76e1fff, 3605811200 bytes (880325 pages)
0x0000000100002000 - 0x000000011ffeffff, 536797184 bytes (131054 pages)
avail memory = 4119937024 (3929 MB)
ACPI APIC Table: <DELL M08 >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ULE: setup cpu group 1
ULE: setup cpu 1
ULE: adding cpu 1 to group 1: cpus 1 mask 0x2
ACPI: RSDP @ 0x0xfbb10/0x0024 (v 2 DELL )
ACPI: XSDT @ 0x0xdfe5d200/0x005C (v 1 DELL M08 0x27D80A1E ASL 0x00000061)
ACPI: FACP @ 0x0xdfe5d09c/0x00F4 (v 4 DELL M08 0x27D80A1E ASL 0x00000061)
ACPI: DSDT @ 0x0xdfe5d800/0x614C (v 2 INT430 SYSFexxx 0x00001001 INTL 0x20050624)
ACPI: FACS @ 0x0xdfe6c000/0x0040
ACPI: HPET @ 0x0xdfe5d300/0x0038 (v 1 DELL M08 0x00000001 ASL 0x00000061)
ACPI: APIC @ 0x0xdfe5d400/0x0068 (v 1 DELL M08 0x27D80A1E ASL 0x00000047)
ACPI: ASF! @ 0x0xdfe5d000/0x007E (v 32 DELL M08 0x27D80A1E ASL 0x00000061)
ACPI: MCFG @ 0x0xdfe5d3c0/0x003E (v 16 DELL M08 0x27D80A1E ASL 0x00000061)
ACPI: TCPA @ 0x0xdfe5d700/0x0032 (v 1 0x00000000 ASL 0x00000000)
ACPI: SSDT @ 0x0xdfe5b97a/0x04CC (v 1 PmRef CpuPm 0x00003000 INTL 0x20050624)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
crypto: <crypto core>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
acpi0: <DELL M08 > on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.VID_.IGDP -> bus 0 dev 2 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.MCHP -> bus 0 dev 0 func 0
ACPI: SSDT @ 0x0xdfe6c080/0x0043 (v 1 LMPWR DELLLOM 0x00001001 INTL 0x20050624)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR1 -> bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR2 -> bus 0 dev 31 func 0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 2 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi0: reservation of 0, 9f000 (3) failed
acpi0: reservation of 100000, dfd5a800 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 9 10 11
Validation 0 255 N 0 9 10 11
After Disable 0 255 N 0 9 10 11
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 5 7
Validation 0 255 N 0 5 7
After Disable 0 255 N 0 5 7
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 9 10 11
Validation 0 10 N 0 9 10 11
After Disable 0 255 N 0 9 10 11
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 9 N 0 5 7 9 10 11
Validation 0 9 N 0 5 7 9 10 11
After Disable 0 255 N 0 5 7 9 10 11
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x2a00, revid=0x0c
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2a01, revid=0x0c
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x2834, revid=0x02
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type I/O Port, range 32, base 0x6f20, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 20
found-> vendor=0x8086, dev=0x2835, revid=0x02
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x6f00, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x283a, revid=0x02
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=9
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfed1c400, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 22
found-> vendor=0x8086, dev=0x284b, revid=0x02
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xf6ffc000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 21
found-> vendor=0x8086, dev=0x283f, revid=0x02
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x2841, revid=0x02
domain=0, bus=0, slot=28, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x2849, revid=0x02
domain=0, bus=0, slot=28, func=5
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x2830, revid=0x02
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type I/O Port, range 32, base 0x6f80, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 20
found-> vendor=0x8086, dev=0x2831, revid=0x02
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x6f60, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x2832, revid=0x02
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=9
map[20]: type I/O Port, range 32, base 0x6f40, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 22
found-> vendor=0x8086, dev=0x2836, revid=0x02
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfed1c000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 20
found-> vendor=0x8086, dev=0x2448, revid=0xf2
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2815, revid=0x02
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2850, revid=0x02
domain=0, bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[20]: type I/O Port, range 32, base 0x6fa0, size 4, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2828, revid=0x02
domain=0, bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x6eb0, size 3, enabled
map[14]: type I/O Port, range 32, base 0x6eb8, size 2, enabled
map[18]: type I/O Port, range 32, base 0x6ec0, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x6ec8, size 2, enabled
map[20]: type I/O Port, range 32, base 0x6ee0, size 4, enabled
map[24]: type I/O Port, range 32, base 0xeff0, size 4, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x283e, revid=0x02
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=3
map[10]: type Memory, range 32, base 0xf6ffbf00, size 8, enabled
map[20]: type I/O Port, range 32, base 0x10c0, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xf2000000-0xf6efffff
pcib1: prefetched decode 0xe0000000-0xefffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x10de, dev=0x042b, revid=0xa1
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xf5000000, size 24, enabled
pcib1: requested memory range 0xf5000000-0xf5ffffff: good
map[14]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled
pcib1: requested memory range 0xe0000000-0xefffffff: good
map[1c]: type Memory, range 64, base 0xf2000000, size 25, enabled
pcib1: requested memory range 0xf2000000-0xf3ffffff: good
map[24]: type I/O Port, range 32, base 0xdf00, size 7, enabled
pcib1: requested I/O range 0xdf00-0xdf7f: in range
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem 0xf5000000-0xf5ffffff,0xf2000000-0xf3ffffff irq 16 at device 0.0 on pci1
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 20 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f20
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 49
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 21 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f00
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfed1c400
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 51
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
hdac0: <Intel 82801H High Definition Audio Controller> mem 0xf6ffc000-0xf6ffffff irq 21 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090624_0136
hdac0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xf6ffc000
hdac0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to vector 52
hdac0: using IRQ 256 for MSI
hdac0: [MPSAFE]
hdac0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib2: domain 0
pcib2: secondary bus 11
pcib2: subordinate bus 11
pcib2: I/O decode 0xf000-0xfff
pcib2: no prefetched decode
pci11: <ACPI PCI bus> on pcib2
pci11: domain=0, physical bus=11
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pcib3: domain 0
pcib3: secondary bus 12
pcib3: subordinate bus 12
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xf1f00000-0xf1ffffff
pcib3: no prefetched decode
pci12: <ACPI PCI bus> on pcib3
pci12: domain=0, physical bus=12
found-> vendor=0x8086, dev=0x4229, revid=0x61
domain=0, bus=12, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xf1ffe000, size 13, enabled
pcib3: requested memory range 0xf1ffe000-0xf1ffffff: good
pcib3: matched entry for 12.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 17
pci12: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pcib4: domain 0
pcib4: secondary bus 9
pcib4: subordinate bus 9
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xf1e00000-0xf1efffff
pcib4: no prefetched decode
pci9: <ACPI PCI bus> on pcib4
pci9: domain=0, physical bus=9
found-> vendor=0x14e4, dev=0x1673, revid=0x02
domain=0, bus=9, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xf1ef0000, size 16, enabled
pcib4: requested memory range 0xf1ef0000-0xf1efffff: good
pcib4: matched entry for 9.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 17
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0xa002> mem 0xf1ef0000-0xf1efffff irq 17 at device 0.0 on pci9
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf1ef0000
bge0: adjust device control 0x2000 -> 0x5000
bge0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 257 to vector 53
bge0: using IRQ 257 for MSI
bge0: CHIP ID 0xa0020000; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E
bge0: Disabling fastboot
bge0: Disabling fastboot
miibus0: <MII bus> on bge0
brgphy0: <BCM5755 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x0050ef, model 0x000c, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:21:70:bd:9c:b2
bge0: [MPSAFE]
bge0: [ITHREAD]
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 20 at device 29.0 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f80
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 21 at device 29.1 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f60
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 22 at device 29.2 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f40
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfed1c000
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib5: domain 0
pcib5: secondary bus 3
pcib5: subordinate bus 4
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xf1d00000-0xf1dfffff
pcib5: no prefetched decode
pcib5: Subtractively decoded bridge.
pci3: <ACPI PCI bus> on pcib5
pci3: domain=0, physical bus=3
found-> vendor=0x1217, dev=0x7135, revid=0x21
domain=0, bus=3, slot=1, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0, size 12, memory disabled
found-> vendor=0x1217, dev=0x00f7, revid=0x02
domain=0, bus=3, slot=1, func=4
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf1dff000, size 12, enabled
pcib5: requested memory range 0xf1dff000-0xf1dfffff: good
map[14]: type Memory, range 32, base 0xf1dfe800, size 11, enabled
pcib5: requested memory range 0xf1dfe800-0xf1dfefff: good
pcib5: matched entry for 3.1.INTA
pcib5: slot 1 INTA hardwired to IRQ 19
pci3: <bridge, PCI-CardBus> at device 1.0 (no driver attached)
pci3: <serial bus, FireWire> at device 1.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6fa0-0x6faf irq 16 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x6fa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54
ata0: [MPSAFE]
ata0: [ITHREAD]
atapci1: <Intel ICH8M SATA300 controller> port 0x6eb0-0x6eb7,0x6eb8-0x6ebb,0x6ec0-0x6ec7,0x6ec8-0x6ecb,0x6ee0-0x6eef,0xeff0-0xefff irq 18 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x6ee0
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 55
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0xeff0
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x6eb0
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x6eb8
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x6ec0
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x6ec8
ata3: reset tp1 mask=00 ostat0=ff ostat1=ff
ata3: [MPSAFE]
ata3: [ITHREAD]
ichsmb0: <SMBus controller> port 0x10c0-0x10df mem 0xf6ffbf00-0xf6ffbfff irq 17 at device 31.3 on pci0
ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x10c0
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 56
ichsmb0: [GIANT-LOCKED]
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 58
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 59
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT @ 0x0xdfe5c4b0/0x02C8 (v 1 PmRef Cpu0Ist 0x00003000 INTL 0x20050624)
ACPI: SSDT @ 0x0xdfe5be46/0x05E5 (v 1 PmRef Cpu0Cst 0x00003001 INTL 0x20050624)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (3368, 3106)
est0: Invalid freq 2401, ignored.
est0: Invalid id16 (set, cur) = (34831, 1559)
est0: Invalid freq 800, ignored.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: SSDT @ 0x0xdfe5c778/0x00C4 (v 1 PmRef Cpu1Ist 0x00003000 INTL 0x20050624)
ACPI: SSDT @ 0x0xdfe5c42b/0x0085 (v 1 PmRef Cpu1Cst 0x00003000 INTL 0x20050624)
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) = (3368, 3106)
est1: Invalid freq 2401, ignored.
est1: Invalid id16 (set, cur) = (34831, 1559)
est1: Invalid freq 800, ignored.
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cryptosoft0: <software crypto> on motherboard
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcffff on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
uhub7: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 2> on uhub5
uhub7: 4 ports with 3 removable, self powered
Device configuration finished.
Reducing kern.maxvnodes 259047 -> 100000
procfs registered
lapic: Divisor 2, Frequency 99750816 hz
Timecounter "TSC" frequency 2394019524 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 tiata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
mes
battery0: battery initialization start
battery0: battery initialization done, tried 1 times
battery1: battery initialization start
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad4: 152627MB <FUJITSU MHZ2160BJ FFS G2 0085001C> at ata2-master SATA300
ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
hdac0: Probing codec #0...
hdac0: HDA Codec #0: Sigmatel STAC9205X
hdac0: HDA Codec ID: 0x838476a0
hdac0: Vendor: 0x8384
hdac0: Device: 0x76a0
hdac0: Revision: 0x02
hdac0: Stepping: 0x04
hdac0: PCI Subvendor: 0x01f91028
hdac0: Found audio FG nid=1 startnode=10 endnode=38 total=28
hdac0: Probing codec #1...
hdac0: HDA Codec #1: Conexant (Unknown)
hdac0: HDA Codec ID: 0x14f12c06
hdac0: Vendor: 0x14f1
hdac0: Device: 0x2c06
hdac0: Revision: 0x00
hdac0: Stepping: 0x00
hdac0: PCI Subvendor: 0x01f91028
hdac0: Found modem FG nid=2 startnode=112 endnode=116 total=4
hdac0:
hdac0: Processing audio FG cad=0 nid=1...
hdac0: GPIO: 0xc0000005 NumGPIO=5 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1
hdac0: nid 10 0x0321101f as 1 seq 15 Headphones Jack jack 1 loc 3 color Black misc 0
hdac0: nid 11 0x0381102e as 2 seq 14 Line-in Jack jack 1 loc 3 color Black misc 0
hdac0: nid 12 0x90a70120 as 2 seq 0 Mic Fixed jack 7 loc 16 color Unknown misc 1
hdac0: nid 13 0x90170110 as 1 seq 0 Speaker Fixed jack 7 loc 16 color Unknown misc 1
hdac0: nid 14 0x40f000f0 as 15 seq 0 Other None jack 0 loc 0 color Unknown misc 0
hdac0: nid 15 0x40f000f1 as 15 seq 1 Other None jack 0 loc 0 color Unknown misc 0
hdac0: nid 20 0x40f000f2 as 15 seq 2 Other None jack 0 loc 0 color Unknown misc 0
hdac0: nid 22 0x40f000f3 as 15 seq 3 Other None jack 0 loc 0 color Unknown misc 0
hdac0: nid 23 0x40f000f4 as 15 seq 4 Other None jack 0 loc 0 color Unknown misc 0
hdac0: nid 24 0x40f000f5 as 15 seq 5 Other None jack 0 loc 0 color Unknown misc 0
hdac0: nid 33 0x40f000f6 as 15 seq 6 Other None jack 0 loc 0 color Unknown misc 0
hdac0: nid 34 0x40f000f7 as 15 seq 7 Other None jack 0 loc 0 color Unknown misc 0
hdac0: Patched pins configuration:
hdac0: nid 10 0x0321101f as 1 seq 15 Headphones Jack jack 1 loc 3 color Black misc 0
hdac0: nid 11 0x0381102e as 2 seq 14 Line-in Jack jack 1 loc 3 color Black misc 0
hdac0: nid 12 0x90a70120 as 2 seq 0 Mic Fixed jack 7 loc 16 color Unknown misc 1
hdac0: nid 13 0x90170110 as 1 seq 0 Speaker Fixed jack 7 loc 16 color Unknown misc 1
hdac0: nid 14 0x40f000f0 as 15 seq 0 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED]
hdac0: nid 15 0x40f000f1 as 15 seq 1 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED]
hdac0: nid 20 0x40f000f2 as 15 seq 2 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED]
hdac0: nid 22 0x40f000f3 as 15 seq 3 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED]
hdac0: nid 23 0x40f000f4 as 15 seq 4 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED]
hdac0: nid 24 0x40f000f5 as 15 seq 5 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED]
hdac0: nid 33 0x40f000f6 as 15 seq 6 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED]
hdac0: nid 34 0x40f000f7 as 15 seq 7 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED]
hdac0: 2 associations found:
hdac0: Association 0 (1) out:
hdac0: Pin nid=13 seq=0
hdac0: Pin nid=10 seq=15
hdac0: Association 1 (2) in:
hdac0: Pin nid=12 seq=0
hdac0: Pin nid=11 seq=14
hdac0: Tracing association 0 (1)
hdac0: Pin 13 traced to DAC 16
hdac0: Pin 10 traced to DAC 16 and hpredir 0
hdac0: Association 0 (1) trace succeeded
hdac0: Tracing association 1 (2)
hdac0: Pin 12 traced to ADC 18
hdac0: Pin 11 traced to ADC 18
hdac0: Association 1 (2) trace succeeded
hdac0: Tracing input monitor
hdac0: Tracing beeper
hdac0: GPIO init: data=0x00000000 mask=0x00000000 dir=0x00000000
hdac0: GPIO commit: data=0x00000001 mask=0x00000001 dir=0x00000001
hdac0: Enabling headphone/speaker audio routing switching:
hdac0: as=0 sense nid=10 [UNSOL]
hdac0: Pin sense: nid=10 res=0x7fffffff
hdac0: FG config/quirks: gpio0 forcestereo ivref50 ivref80 ivref100 ivref
hdac0:
hdac0: +-------------------+
hdac0: | DUMPING HDA NODES |
hdac0: +-------------------+
hdac0:
hdac0: Default Parameter
hdac0: -----------------
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e07e0
hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0: IN amp: 0x00050f00
hdac0: OUT amp: 0x80027f7f
hdac0:
hdac0: nid: 10
hdac0: Name: pin: Headphones (Black Jack)
hdac0: Widget cap: 0x00400181
hdac0: UNSOL STEREO
hdac0: Association: 0 (0x00008000)
hdac0: Pin cap: 0x0000173f
hdac0: ISC TRQD PDC HP OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0: Pin config: 0x0321101f
hdac0: Pin control: 0x00000080 HP
hdac0: connections: 2
hdac0: |
hdac0: + <- nid=16 [audio output] (selected)
hdac0: + [DISABLED] <- nid=17 [audio output] [DISABLED]
hdac0:
hdac0: nid: 11
hdac0: Name: pin: Line-in (Black Jack)
hdac0: Widget cap: 0x00400181
hdac0: UNSOL STEREO
hdac0: Association: 1 (0x00004000)
hdac0: OSS: line (line)
hdac0: Pin cap: 0x00001737
hdac0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0: Pin config: 0x0381102e
hdac0: Pin control: 0x00000024 IN VREFs
hdac0: connections: 2
hdac0: |
hdac0: + [DISABLED] <- nid=16 [audio output] (selected)
hdac0: + [DISABLED] <- nid=17 [audio output] [DISABLED]
hdac0:
hdac0: nid: 12
hdac0: Name: pin: Mic (Fixed)
hdac0: Widget cap: 0x00400181
hdac0: UNSOL STEREO
hdac0: Association: 1 (0x00000001)
hdac0: OSS: monitor (monitor)
hdac0: Pin cap: 0x00001737
hdac0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0: Pin config: 0x90a70120
hdac0: Pin control: 0x00000024 IN VREFs
hdac0: connections: 1
hdac0: |
hdac0: + [DISABLED] <- nid=17 [audio output] [DISABLED]
hdac0:
hdac0: nid: 13
hdac0: Name: pin: Speaker (Fixed)
hdac0: Widget cap: 0x00400181
hdac0: UNSOL STEREO
hdac0: Association: 0 (0x00000001)
hdac0: Pin cap: 0x0000003f
hdac0: ISC TRQD PDC HP OUT IN
hdac0: Pin config: 0x90170110
hdac0: Pin control: 0x00000040 OUT
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=16 [audio output]
hdac0:
hdac0: nid: 14 [DISABLED]
hdac0: Name: pin: Other (None)
hdac0: Widget cap: 0x00400181
hdac0: UNSOL STEREO
hdac0: Pin cap: 0x00001737
hdac0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0: Pin config: 0x40f000f0
hdac0: Pin control: 0x00000000
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=16 [audio output]
hdac0:
hdac0: nid: 15 [DISABLED]
hdac0: Name: pin: Other (None)
hdac0: Widget cap: 0x00400181
hdac0: UNSOL STEREO
hdac0: Pin cap: 0x00001737
hdac0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0: Pin config: 0x40f000f1
hdac0: Pin control: 0x00000000
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=17 [audio output] [DISABLED]
hdac0:
hdac0: nid: 16
hdac0: Name: audio output
hdac0: Widget cap: 0x000d0c05
hdac0: LRSWAP PWR STEREO
hdac0: Association: 0 (0x00008001)
hdac0: OSS: pcm (pcm)
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e07e0
hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0: Output amp: 0x80027f7f
hdac0: mute=1 step=127 size=2 offset=127
hdac0:
hdac0: nid: 17 [DISABLED]
hdac0: Name: audio output
hdac0: Widget cap: 0x000d0c05
hdac0: LRSWAP PWR STEREO
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e07e0
hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0: Output amp: 0x80027f7f
hdac0: mute=1 step=127 size=2 offset=127
hdac0:
hdac0: nid: 18
hdac0: Name: audio input
hdac0: Widget cap: 0x001d0541
hdac0: PWR PROC STEREO
hdac0: Association: 1 (0x00004001)
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e07e0
hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=29 [audio selector]
hdac0:
hdac0: nid: 19 [DISABLED]
hdac0: Name: audio input
hdac0: Widget cap: 0x001d0541
hdac0: PWR PROC STEREO
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e07e0
hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=30 [audio selector] [DISABLED]
hdac0:
hdac0: nid: 20 [DISABLED]
hdac0: Name: pin: Other (None)
hdac0: Widget cap: 0x0040010c
hdac0: Pin cap: 0x00000010
hdac0: OUT
hdac0: Pin config: 0x40f000f2
hdac0: Pin control: 0x00000000
hdac0: Output amp: 0x80051f1f
hdac0: mute=1 step=31 size=5 offset=31
hdac0: connections: 1
hdac0: |
hdac0: + [DISABLED] <- nid=21 [audio mixer] [DISABLED]
hdac0:
hdac0: nid: 21 [DISABLED]
hdac0: Name: audio mixer
hdac0: Widget cap: 0x00200100
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=16 [audio output]
hdac0:
hdac0: nid: 22 [DISABLED]
hdac0: Name: pin: Other (None)
hdac0: Widget cap: 0x00400001
hdac0: STEREO
hdac0: Pin cap: 0x00000020
hdac0: IN
hdac0: Pin config: 0x40f000f3
hdac0: Pin control: 0x00000000
hdac0:
hdac0: nid: 23 [DISABLED]
hdac0: Name: pin: Other (None)
hdac0: Widget cap: 0x00400001
hdac0: STEREO
hdac0: Pin cap: 0x00000020
hdac0: IN
hdac0: Pin config: 0x40f000f4
hdac0: Pin control: 0x00000000
hdac0:
hdac0: nid: 24 [DISABLED]
hdac0: Name: pin: Other (None)
hdac0: Widget cap: 0x00400001
hdac0: STEREO
hdac0: Pin cap: 0x00000020
hdac0: IN
hdac0: Pin config: 0x40f000f5
hdac0: Pin control: 0x00000000
hdac0:
hdac0: nid: 25
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030010d
hdac0: STEREO
hdac0: Association: 1 (0x00004001)
hdac0: OSS: line, monitor
hdac0: Output amp: 0x00270400
hdac0: mute=0 step=4 size=39 offset=0
hdac0: connections: 7
hdac0: |
hdac0: + [DISABLED] <- nid=14 [pin: Other (None)] [DISABLED]
hdac0: + [DISABLED] <- nid=22 [pin: Other (None)] [DISABLED]
hdac0: + [DISABLED] <- nid=15 [pin: Other (None)] [DISABLED]
hdac0: + <- nid=11 [pin: Line-in (Black Jack)]
hdac0: + <- nid=12 [pin: Mic (Fixed)] (selected)
hdac0: + [DISABLED] <- nid=13 [pin: Speaker (Fixed)]
hdac0: + [DISABLED] <- nid=10 [pin: Headphones (Black Jack)]
hdac0:
hdac0: nid: 26 [DISABLED]
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030010d
hdac0: STEREO
hdac0: Output amp: 0x00270400
hdac0: mute=0 step=4 size=39 offset=0
hdac0: connections: 7
hdac0: |
hdac0: + [DISABLED] <- nid=14 [pin: Other (None)] [DISABLED] (selected)
hdac0: + [DISABLED] <- nid=22 [pin: Other (None)] [DISABLED]
hdac0: + [DISABLED] <- nid=15 [pin: Other (None)] [DISABLED]
hdac0: + <- nid=11 [pin: Line-in (Black Jack)]
hdac0: + <- nid=12 [pin: Mic (Fixed)]
hdac0: + <- nid=13 [pin: Speaker (Fixed)]
hdac0: + <- nid=10 [pin: Headphones (Black Jack)]
hdac0:
hdac0: nid: 27
hdac0: Name: audio selector
hdac0: Widget cap: 0x00300103
hdac0: STEREO
hdac0: Association: 1 (0x00004001)
hdac0: OSS: line, monitor
hdac0: Input amp: 0x00050f00
hdac0: mute=0 step=15 size=5 offset=0
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=25 [audio selector]
hdac0:
hdac0: nid: 28 [DISABLED]
hdac0: Name: audio selector
hdac0: Widget cap: 0x00300103
hdac0: STEREO
hdac0: Input amp: 0x00050f00
hdac0: mute=0 step=15 size=5 offset=0
hdac0: connections: 1
hdac0: |
hdac0: + [DISABLED] <- nid=26 [audio selector] [DISABLED]
hdac0:
hdac0: nid: 29
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030090d
hdac0: LRSWAP STEREO
hdac0: Association: 1 (0x00004001)
hdac0: OSS: line, monitor
hdac0: Output amp: 0x80000000
hdac0: mute=1 step=0 size=0 offset=0
hdac0: connections: 3
hdac0: |
hdac0: + <- nid=27 [audio selector] (selected)
hdac0: + [DISABLED] <- nid=23 [pin: Other (None)] [DISABLED]
hdac0: + [DISABLED] <- nid=24 [pin: Other (None)] [DISABLED]
hdac0:
hdac0: nid: 30 [DISABLED]
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030090d
hdac0: LRSWAP STEREO
hdac0: Output amp: 0x80000000
hdac0: mute=1 step=0 size=0 offset=0
hdac0: connections: 3
hdac0: |
hdac0: + <- nid=28 [audio selector] [DISABLED] (selected)
hdac0: + [DISABLED] <- nid=23 [pin: Other (None)] [DISABLED]
hdac0: + [DISABLED] <- nid=24 [pin: Other (None)] [DISABLED]
hdac0:
hdac0: nid: 31 [DISABLED]
hdac0: Name: audio output
hdac0: Widget cap: 0x00040211
hdac0: DIGITAL STEREO
hdac0: Stream cap: 0x00000005
hdac0: AC3 PCM
hdac0: PCM cap: 0x000e05e0
hdac0: 16 20 24 bits, 44 48 88 96 192 KHz
hdac0:
hdac0: nid: 32 [DISABLED]
hdac0: Name: audio input
hdac0: Widget cap: 0x00140311
hdac0: DIGITAL STEREO
hdac0: Stream cap: 0x00000005
hdac0: AC3 PCM
hdac0: PCM cap: 0x000e0160
hdac0: 16 20 24 bits, 44 48 96 KHz
hdac0: connections: 1
hdac0: |
hdac0: + [DISABLED] <- nid=34 [pin: Other (None)] [DISABLED]
hdac0:
hdac0: nid: 33 [DISABLED]
hdac0: Name: pin: Other (None)
hdac0: Widget cap: 0x00400301
hdac0: DIGITAL STEREO
hdac0: Pin cap: 0x00000010
hdac0: OUT
hdac0: Pin config: 0x40f000f6
hdac0: Pin control: 0x00000000
hdac0: connections: 3
hdac0: |
hdac0: + <- nid=31 [audio output] [DISABLED] (selected)
hdac0: + <- nid=29 [audio selector]
hdac0: + <- nid=30 [audio selector] [DISABLED]
hdac0:
hdac0: nid: 34 [DISABLED]
hdac0: Name: pin: Other (None)
hdac0: Widget cap: 0x00430681
hdac0: PWR DIGITAL UNSOL STEREO
hdac0: Pin cap: 0x00010024
hdac0: PDC IN EAPD
hdac0: Pin config: 0x40f000f7
hdac0: Pin control: 0x00000000
hdac0: EAPD: 0x00000002
hdac0:
hdac0: nid: 35
hdac0: Name: beep widget
hdac0: Widget cap: 0x0070000c
hdac0: Association: -2 (0x00000000)
hdac0: OSS: speaker (speaker)
hdac0: Output amp: 0x00170303
hdac0: mute=0 step=3 size=23 offset=3
hdac0:
hdac0: nid: 36 [DISABLED]
hdac0: Name: volume widget
hdac0: Widget cap: 0x00600000
hdac0: connections: 2
hdac0: |
hdac0: + <- nid=16 [audio output] (selected)
hdac0: + <- nid=17 [audio output] [DISABLED]
hdac0:
hdac0: nid: 37 [DISABLED]
hdac0: Name: vendor widget
hdac0: Widget cap: 0x00f00001
hdac0: STEREO
hdac0:
hdac0: Processing modem FG cad=1 nid=2...
hdac0:
pcm0: <HDA Sigmatel STAC9205X PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm0: +--------------------------------------+
pcm0: | DUMPING PCM Playback/Record Channels |
pcm0: +--------------------------------------+
pcm0:
pcm0: Playback:
pcm0:
pcm0: Stream cap: 0x00000001
pcm0: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: 16 20 24 bits, 44 48 88 96 176 192 KHz
pcm0: DAC: 16
pcm0:
pcm0: Record:
pcm0:
pcm0: Stream cap: 0x00000001
pcm0: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: 16 20 24 bits, 44 48 88 96 176 192 KHz
pcm0: ADC: 18
pcm0:
pcm0: +-------------------------------+
pcm0: | DUMPING Playback/Record Paths |
pcm0: +-------------------------------+
pcm0:
pcm0: Playback:
pcm0:
pcm0: nid=10 [pin: Headphones (Black Jack)]
pcm0: |
pcm0: + <- nid=16 [audio output] [src: pcm]
pcm0:
pcm0: nid=13 [pin: Speaker (Fixed)]
pcm0: |
pcm0: + <- nid=16 [audio output] [src: pcm]
pcm0:
pcm0: Record:
pcm0:
pcm0: nid=18 [audio input]
pcm0: |
pcm0: + <- nid=29 [audio selector] [src: line, monitor]
pcm0: |
pcm0: + <- nid=27 [audio selector] [src: line, monitor]
pcm0: |
pcm0: + <- nid=25 [audio selector] [src: line, monitor]
pcm0: |
pcm0: + <- nid=11 [pin: Line-in (Black Jack)] [src: line]
pcm0: + <- nid=12 [pin: Mic (Fixed)] [src: monitor]
pcm0:
pcm0: +-------------------------+
pcm0: | DUMPING Volume Controls |
pcm0: +-------------------------+
pcm0:
pcm0: Master Volume (OSS: vol)
pcm0: |
pcm0: +- ctl 1 (nid 16 out): -95/0dB (128 steps) + mute
pcm0:
pcm0: PCM Volume (OSS: pcm)
pcm0: |
pcm0: +- ctl 1 (nid 16 out): -95/0dB (128 steps) + mute
pcm0:
pcm0: Speaker/Beep Volume (OSS: speaker)
pcm0: |
pcm0: +- ctl 10 (nid 35 out): -18/0dB (4 steps)
pcm0:
pcm0: Recording Level (OSS: rec)
pcm0: |
pcm0: +- ctl 4 (nid 25 out): 0/40dB (5 steps)
pcm0: +- ctl 6 (nid 27 in 0): 0/22dB (16 steps)
pcm0: +- ctl 8 (nid 29 out): mute
pcm0:
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "rec":
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 34f0000, 4000; 0xffffff8077373000 -> 34f0000
pcm0: sndbuf_setmap 3a10000, 4000; 0xffffff8077383000 -> 3a10000
unknown: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe0:ata0:0:0:0): Down reving Protocol Version from 2 to 0?
(probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata0:0:0:0): CAM Status: SCSI Status Error
(probe0:ata0:0:0:0): SCSI Status: Check Condition
(probe0:ata0:0:0:0): NOT READY csi:0,0,bb,0 asc:3a,0
(probe0:ata0:0:0:0): Medium not present
(probe0:ata0:0:0:0): (probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata0:0:0:0): NOT READY csi:0,0,bb,0 asc:3a,0
(probe0:ata0:0:0:0): Medium not present
Unretryable error
(probe0:ata0:0:0:0): error 6
(probe0:ata0:0:0:0): Unretryable Error
(probe0:ata0:0:0:0): error 6
(probe0:ata0:0:0:0): Unretryable Error
unknown: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
pass0 at ata0 bus 0 target 0 lun 0
pass0: <HL-DT-ST DVD+-RW GSA-T21N A1R1> GEOM: new disk cd0
Removable CD-ROM SCSI-0 device
pass0: 3.300MB/s transfers
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVD+-RW GSA-T21N A1R1> Removable CD-ROM SCSI-0 device
cdS0M:P :3 .AP3 0C0PMUB /#s 1t rLaanusncfheerds!
cdc0p:u 1 AtAtPe:m
pt t o qIuDe:r y0 xd0e1v0i0c0e0 0s0i z e VfEaRi:l e0dx:0 0N0O50T0 1R4E ALDDYR,: M0exdi0u0m0 0n0o0t0 0p rDeFsRe:n t0x
ffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 12 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning PCI IRQ 17 to local APIC 1
ioapic0: Assigning PCI IRQ 18 to local APIC 0
ioapic0: Assigning PCI IRQ 20 to local APIC 1
ioapic0: Assigning PCI IRQ 21 to local API(Cc d00:
atiaoa0p:i0c:00:: 0A)s:s iegrnrionrg 6P
CI( cIdR0Q: at2a20 :t0o: l0o:c0a)l: AUPnIrCe t1ry
abmslie: EArsrsoirg
ning MSI IRQ 256 to local APIC 0
msi: Assigning MSI IRQ 257 to local APIC 1
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
scsi_cd.c::ioctl cmd=4400648b error=25
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
Trying to mount root from ufs:/dev/label/horowitz_root
start_init: trying /sbin/init
bge0: Disabling fastboot
bge0: Disabling fastboot
ipfw2 initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled
splash: image decoder found: green_saver
battery1: battery initialization failed, giving up
****************
and on Linux (normal boot):
****************
Linux version 2.6.31.5-desktop586-1mnb (herton at n2.mandriva.com) (gcc version 4.4.1 (GCC) ) #1 SMP Fri Oct 23 00:21:26 EDT 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfe5a800 (usable)
BIOS-e820: 00000000dfe5a800 - 00000000e0000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100002000 - 0000000120000000 (usable)
DMI 2.4 present.
last_pfn = 0xdfe5a max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FE0000000 write-back
3 base 100000000 mask FE0000000 write-back
4 base 0DFF00000 mask FFFF00000 uncachable
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-00000000373fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037000000 page 2M
0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ 7000-d000
RAMDISK: 7f94e000 - 7fffecdd
Allocated new RAMDISK: 00705000 - 00db5cdd
Move RAMDISK from 000000007f94e000 - 000000007fffecdc to 00705000 - 00db5cdc
ACPI: RSDP 000fbb10 00024 (v02 DELL )
ACPI: XSDT dfe5d200 0005C (v01 DELL M08 27D80A1E ASL 00000061)
ACPI: FACP dfe5d09c 000F4 (v04 DELL M08 27D80A1E ASL 00000061)
ACPI: DSDT dfe5d800 0614C (v02 INT430 SYSFexxx 00001001 INTL 20050624)
ACPI: FACS dfe6c000 00040
ACPI: HPET dfe5d300 00038 (v01 DELL M08 00000001 ASL 00000061)
ACPI: APIC dfe5d400 00068 (v01 DELL M08 27D80A1E ASL 00000047)
ACPI: ASF! dfe5d000 0007E (v32 DELL M08 27D80A1E ASL 00000061)
ACPI: MCFG dfe5d3c0 0003E (v16 DELL M08 27D80A1E ASL 00000061)
ACPI: TCPA dfe5d700 00032 (v01 00000000 ASL 00000000)
ACPI: SSDT dfe5b97a 004CC (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
2698MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
node 0 low ram: 00000000 - 373fe000
node 0 bootmap 00009000 - 0000fe80
(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 0000700ec4] TEXT DATA BSS ==> [0000100000 - 0000700ec4]
#4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#5 [0000701000 - 0000704188] BRK ==> [0000701000 - 0000704188]
#6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
#7 [0000705000 - 0000db5cdd] NEW RAMDISK ==> [0000705000 - 0000db5cdd]
#8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x000dfe5a
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x000dfe5a
On node 0 totalpages: 916985
free_area_init_node: node 0, pgdat c05cff00, node_mem_map c1000000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 220470 pages, LIFO batch:31
HighMem zone: 5397 pages used for memmap
HighMem zone: 685383 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages at c2c10000, static data 35132 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 909820
Kernel command line: initrd=/boot/cdrom/initrd.gz splash=silent vga=788 BOOT_IMAGE=/boot/vmlinuz
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000373fe:000dfe5a)
Memory: 3624420k/3668328k available (3093k kernel code, 42688k reserved, 1885k data, 436k init, 2763120k highmem)
virtual kernel memory layout:
fixmap : 0xffd54000 - 0xfffff000 (2732 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc05dd000 - 0xc064a000 ( 436 kB)
.data : 0xc0405492 - 0xc05dc8c8 (1885 kB)
.text : 0xc0100000 - 0xc0405492 (3093 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
NR_IRQS:1280
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2393.873 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.74 BogoMIPS (lpj=2393873)
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Counters: Core2 events, Intel PMU driver.
.. version: 2
.. bit width: 40
.. generic counters: 2
.. value mask: 000000ffffffffff
.. max period: 000000007fffffff
.. fixed-purpose counters: 3
.. counter mask: 0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Checking initramfs for custom DSDT
ACPI: Aborted because no cpio magic.
ACPI: Core revision 20090521
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 14182 entries in 28 pages
.TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4787.74 BogoMIPS (lpj=2393873)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (9575.49 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
devtmpfs: initialized
Booting paravirtualized kernel on bare hardware
Time: 12:26:24 Date: 12/03/09
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT dfe6c080 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f]
pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6ffc000-0xf6ffffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f]
pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f]
pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf]
pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7]
pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb]
pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7]
pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb]
pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eef]
pci 0000:00:1f.2: reg 24 io port: [0xeff0-0xefff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0xf6ffbf00-0xf6ffbfff]
pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
pci 0000:01:00.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xf2000000-0xf3ffffff]
pci 0000:01:00.0: reg 24 io port: [0xdf00-0xdf7f]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xf2000000-0xf6efffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:0c:00.0: reg 10 64bit mmio: [0xf1ffe000-0xf1ffffff]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:00:1c.1: bridge 32bit mmio: [0xf1f00000-0xf1ffffff]
pci 0000:09:00.0: reg 10 64bit mmio: [0xf1ef0000-0xf1efffff]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:00:1c.5: bridge 32bit mmio: [0xf1e00000-0xf1efffff]
pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:03:01.0: supports D1 D2
pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.0: PME# disabled
pci 0000:03:01.4: reg 10 32bit mmio: [0xf1dff000-0xf1dfffff]
pci 0000:03:01.4: reg 14 32bit mmio: [0xf1dfe800-0xf1dfefff]
pci 0000:03:01.4: supports D1 D2
pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.4: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xf1d00000-0xf1dfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *5
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0b: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:0b: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:0d: mem resource (0xdff00000-0xe06fffff) overlaps 0000:00:01.0 BAR 15 (0xe0000000-0xefffffff), disabling
pnp 00:0d: mem resource (0xdff00000-0xe06fffff) overlaps 0000:01:00.0 BAR 1 (0xe0000000-0xefffffff), disabling
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
system 00:05: ioport range 0xc80-0xcaf has been reserved
system 00:05: ioport range 0xcc0-0xcff could not be reserved
system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:0a: ioport range 0xcb0-0xcbb has been reserved
system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:0b: ioport range 0x900-0x97f has been reserved
system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
system 00:0c: ioport range 0xf400-0xf4fe has been reserved
system 00:0c: ioport range 0x1080-0x10bf has been reserved
system 00:0c: ioport range 0x10c0-0x10df has been reserved
system 00:0c: ioport range 0x809-0x809 has been reserved
system 00:0d: iomem range 0x0-0x9efff could not be reserved
system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0xdfe5a7ff could not be reserved
system 00:0d: iomem range 0xdfe5a800-0xdfefffff has been reserved
system 00:0d: iomem range 0xdff00000-0xdfffffff has been reserved
system 00:0d: iomem range 0xffe00000-0xffffffff has been reserved
system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved
system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved
system 00:0d: iomem range 0xfee00000-0xfee0ffff has been reserved
system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:0d: iomem range 0xfeda0000-0xfeda3fff has been reserved
system 00:0d: iomem range 0xfeda4000-0xfeda4fff has been reserved
system 00:0d: iomem range 0xfeda5000-0xfeda5fff has been reserved
system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
system 00:0d: iomem range 0xfed18000-0xfed1bfff has been reserved
system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
pci 0000:00:1e.0: BAR 15: can't allocate mem resource [0x000000-0x3ffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xd000-0xdfff
pci 0000:00:01.0: MEM window: 0xf2000000-0xf6efffff
pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: 0xf1f00000-0xf1ffffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
pci 0000:00:1c.5: IO window: disabled
pci 0000:00:1c.5: MEM window: 0xf1e00000-0xf1efffff
pci 0000:00:1c.5: PREFETCH window: disabled
pci 0000:03:01.0: BAR 15: can't allocate mem resource [0x000000-0x3ffffff]
pci 0000:03:01.0: BAR 16: can't allocate mem resource [0x000000-0x3ffffff]
pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
pci 0000:03:01.0: IO window: 0x002000-0x0020ff
pci 0000:03:01.0: IO window: 0x002400-0x0024ff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0: IO window: 0x2000-0x2fff
pci 0000:00:1e.0: MEM window: 0xf1d00000-0xf1dfffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:03:01.0: enabling device (0000 -> 0003)
pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:01: resource 1 mem: [0xf2000000-0xf6efffff]
pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
pci_bus 0000:0c: resource 1 mem: [0xf1f00000-0xf1ffffff]
pci_bus 0000:09: resource 1 mem: [0xf1e00000-0xf1efffff]
pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:03: resource 1 mem: [0xf1d00000-0xf1dfffff]
pci_bus 0000:03: resource 3 io: [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:04: resource 0 io: [0x2000-0x20ff]
pci_bus 0000:04: resource 1 io: [0x2400-0x24ff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6851k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1259843183.350:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1697
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.5: setting latency timer to 64
vesafb: framebuffer at 0xf3000000, mapped to 0xf7c80000, using 1875k, total 14336k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:b3b0
vesafb: pmi: set display start = c00cb413, set palette = c00cb46e
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
TCP cubic registered
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 5:906:429
rtc_cmos 00:03: setting system clock to 2009-12-03 12:26:24 UTC (1259843184)
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
input: DualPoint Stick as /devices/platform/i8042/serio1/input/input1
input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input2
md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
RAMDISK: gzip image found at block 0
VFS: Mounted root (ext2 filesystem) on device 1:0.
Uniform Multi-Platform E-IDE driver
ide-cd driver 5.00
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31.5-desktop586-1mnb uhci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31.5-desktop586-1mnb uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31.5-desktop586-1mnb uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31.5-desktop586-1mnb uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31.5-desktop586-1mnb uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.31.5-desktop586-1mnb ehci_hcd
usb usb6: SerialNumber: 0000:00:1a.7
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.31.5-desktop586-1mnb ehci_hcd
usb usb7: SerialNumber: 0000:00:1d.7
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
loop: module loaded
squashfs: version 3.3 (2007/10/31) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
Registering unionfs 1.4
unionfs: debugging is not enabled
ohci1394 0000:03:01.4: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f1dff000-f1dff7ff] Max Packet=[2048] IR/IT contexts=[8/8]
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
ata_piix 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata2: port disabled. ignoring.
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 18
ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 18
ata1.00: ATAPI: HL-DT-ST DVD+/-RW GSA-T21N, A1R1, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-T21N A1R1 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: New USB device found, idVendor=0b97, idProduct=7761
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-1: configuration #1 chosen from 1 choice
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
usb 5-1.2: new full speed USB device using uhci_hcd and address 3
ata4.00: SATA link down (SStatus 0 SControl 300)
ata4.01: SATA link down (SStatus 0 SControl 0)
usb 5-1.2: New USB device found, idVendor=0b97, idProduct=7772
usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.2: Product: O2Micro CCID SC Reader
usb 5-1.2: Manufacturer: O2
usb 5-1.2: configuration #1 chosen from 1 choice
ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.01: SATA link down (SStatus 0 SControl 300)
ata3.00: ATA-8: FUJITSU MHZ2160BJ FFS G2, 0085001C, max UDMA/100
ata3.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA FUJITSU MHZ2160B 0085 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sda2: <bsd: sda5 sda6 >
sd 2:0:0:0: [sda] Attached SCSI disk
ieee1394: Host added: ID:BUS[0-00:1023] GUID[484fc0003a121090]
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
------------[ cut here ]------------
WARNING: at fs/namei.c:1270 lookup_one_len+0xcf/0xf0()
Hardware name: Latitude D630
Modules linked in: sbp2 ahci ata_piix libata ohci1394 ieee1394 unionfs squashfs sqlzma unlzma loop ehci_hcd ohci_hcd uhci_hcd usb_storage usbcore sd_mod crc_t10dif vfat fat isofs nls_utf8 nls_iso8859_15 nls_iso8859_14 nls_iso8859_13 nls_iso8859_9 nls_iso8859_7 nls_iso8859_6 nls_iso8859_5 nls_iso8859_4 nls_iso8859_3 nls_iso8859_2 nls_iso8859_1 sr_mod scsi_mod ide_cd_mod ide_core
Pid: 32, comm: plymouthd Not tainted 2.6.31.5-desktop586-1mnb #1
Call Trace:
[<c0140f62>] warn_slowpath_common+0x72/0xa0
[<c01e79df>] ? lookup_one_len+0xcf/0xf0
[<c01e79df>] ? lookup_one_len+0xcf/0xf0
[<c0140faa>] warn_slowpath_null+0x1a/0x20
[<c01e79df>] lookup_one_len+0xcf/0xf0
[<c0287a55>] ? strlcat+0x25/0x70
[<f813f517>] unionfs_lookup_backend+0x3b7/0x8d0 [unionfs]
[<c01bff1d>] ? __inc_zone_page_state+0x1d/0x20
[<c020dde1>] ? ep_poll_callback+0x91/0xc0
[<c0130f6c>] ? __wake_up_sync_key+0x4c/0x60
[<c03e1c4e>] ? unix_stream_recvmsg+0x1ae/0x4e0
[<f8137144>] unionfs_lookup+0x34/0x60 [unionfs]
[<c01e6ab5>] ? path_put+0x25/0x30
[<c01e5e61>] ? inode_permission+0x91/0xb0
[<c01e66ea>] ? getname+0x2a/0xe0
[<c01e7639>] do_lookup+0x139/0x1a0
[<c01e7c73>] __link_path_walk+0x133/0xc60
[<c01f3f7f>] ? mntput_no_expire+0x1f/0xd0
[<c01df1bf>] ? get_empty_filp+0xcf/0x1c0
[<c01e8946>] path_walk+0x46/0xa0
[<c01e89f9>] do_path_lookup+0x59/0x90
[<c01e983d>] do_filp_open+0xad/0x920
[<c01f3f7f>] ? mntput_no_expire+0x1f/0xd0
[<c01e6ab5>] ? path_put+0x25/0x30
[<c01e5e61>] ? inode_permission+0x91/0xb0
[<c01e66ea>] ? getname+0x2a/0xe0
[<c01dbd55>] do_sys_open+0x55/0x160
[<c01dbece>] sys_open+0x2e/0x40
[<c0103e4c>] syscall_call+0x7/0xb
---[ end trace 3410395356b8c04d ]---
Freeing unused kernel memory: 436k freed
Tomoyo security MAC extension available but disabled by default. If you want to
enable and use it, ccs-tools package must be installed.
input: PC Speaker as /devices/platform/pcspkr/input/input3
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ACPI: AC Adapter [AC] (on-line)
ACPI: SSDT dfe5c4b0 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT dfe5be46 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (44 C)
ACPI: SSDT dfe5c778 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT dfe5c42b 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Battery Slot [BAT1] (battery absent)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:31/device:32/input/input4
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
tg3.c:v3.99 (April 20, 2009)
tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:09:00.0: setting latency timer to 64
tg3 0000:09:00.0: PME# disabled
eth0: Tigon3 [partno(BCM95755m) rev a002] (PCI Express) MAC address 00:21:70:bd:9c:b2
eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ACPI: WMI: Mapper loaded
yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:01f9]
yenta_cardbus 0000:03:01.0: CardBus bridge, secondary bus 0000:04
yenta_cardbus 0000:03:01.0: IO window: 0x002000-0x0020ff
yenta_cardbus 0000:03:01.0: IO window: 0x002400-0x0024ff
yenta_cardbus 0000:03:01.0: PREFETCH window: 0xf0000000-0xf03fffff
yenta_cardbus 0000:03:01.0: MEM window: 0xf0400000-0xf07fffff
yenta_cardbus 0000:03:01.0: O2: res at 0x94/0xD4: 00/ea
yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
ACPI: Sleep Button [SBTN]
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: setting latency timer to 64
yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
yenta_cardbus 0000:03:01.0: Socket status: 30000006
pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xf1d00000 - 0xf1dfffff
cfg80211: Calling CRDA to update world regulatory domain
autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0)
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x21/0x0
inputs: mic=0xb, fmic=0xc, line=0x0, fline=0x0, cd=0x0, aux=0x0
stac92xx: dac_nids=1 (0x10/0x0/0x0/0x0/0x0)
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:0c:00.0: setting latency timer to 64
iwlagn 0000:0c:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
iwlagn 0000:0c:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
iwlagn 0000:0c:00.0: irq 28 for MSI/MSI-X
phy0: Selected rate control algorithm 'iwl-agn-rs'
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Floppy drive(s): fd0 is 1.44M
Clocksource tsc unstable (delta = -498111126 ns)
floppy0: no floppy controllers found
vboxadd: VirtualBox Guest PCI device not found.
vboxadd: VirtualBox Guest PCI device not found.
vboxvfs: Unknown symbol vboxadd_cmc_open
vboxvfs: Unknown symbol RTLogBackdoorPrintf
vboxvfs: Unknown symbol vboxadd_cmc_ctl_guest_filter_mask
vboxvfs: Unknown symbol RTErrConvertToErrno
vboxvfs: Unknown symbol vboxadd_cmc_call
vboxvfs: Unknown symbol vboxadd_cmc_close
vboxvfs: Unknown symbol AssertMsg2
vboxvfs: Unknown symbol RTAssertShouldPanic
vboxvfs: Unknown symbol AssertMsg1
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.
ClusterIP Version 0.8 loaded successfully
xt_time: kernel timezone is -0500
netfilter PSD loaded - (c) astaro AG
IFWLOG: register target
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
tg3 0000:09:00.0: PME# disabled
tg3 0000:09:00.0: irq 29 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009
fuse init (API version 7.12)
****************
Here is the output of "pciconf -l -bcv":
****************
hostb0 at pci0:0:0:0: class=0x060000 card=0x01f91028 chip=0x2a008086 rev=0x0c hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile PM965/GM965/GL960 Express Processor to DRAM Controller'
class = bridge
subclass = HOST-PCI
cap 09[e0] = vendor (length 10) Intel cap 9 version 1
pcib1 at pci0:0:1:0: class=0x060400 card=0x01f91028 chip=0x2a018086 rev=0x0c hdr=0x01
vendor = 'Intel Corporation'
device = 'Mobile PM965/GM965/GL960 Express PCIe Root Port'
class = bridge
subclass = PCI-PCI
cap 0d[88] = PCI Bridge card=0x01f91028
cap 01[80] = powerspec 3 supports D0 D3 current D0
cap 05[90] = MSI supports 1 message
cap 10[a0] = PCI-Express 1 root port max data 128(128) link x16(x16)
uhci0 at pci0:0:26:0: class=0x0c0300 card=0x01f91028 chip=0x28348086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI *4'
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0x6f20, size 32, enabled
uhci1 at pci0:0:26:1: class=0x0c0300 card=0x01f91028 chip=0x28358086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI *5'
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0x6f00, size 32, enabled
ehci0 at pci0:0:26:7: class=0x0c0320 card=0x01f91028 chip=0x283a8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'ICH8 Enhanced USB2 Enhanced Host Controller (81EC1043 (?))'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfed1c400, size 1024, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
hdac0 at pci0:0:27:0: class=0x040300 card=0x01f91028 chip=0x284b8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = 'Intel audio controller embedded with the 82801H chipset ( ICH8 chipset ) (82801H)'
class = multimedia
subclass = HDA
bar [10] = type Memory, range 64, base 0xf6ffc000, size 16384, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 05[60] = MSI supports 1 message, 64 bit enabled with 1 message
cap 10[70] = PCI-Express 1 root endpoint max data 128(128) link x0(x0)
pcib2 at pci0:0:28:0: class=0x060400 card=0x01f91028 chip=0x283f8086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 1'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 1 root port max data 128(128) link x0(x1)
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x01f91028
cap 01[a0] = powerspec 2 supports D0 D3 current D0
pcib3 at pci0:0:28:1: class=0x060400 card=0x01f91028 chip=0x28418086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 2'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x01f91028
cap 01[a0] = powerspec 2 supports D0 D3 current D0
pcib4 at pci0:0:28:5: class=0x060400 card=0x01f91028 chip=0x28498086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 6'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x01f91028
cap 01[a0] = powerspec 2 supports D0 D3 current D0
uhci2 at pci0:0:29:0: class=0x0c0300 card=0x01f91028 chip=0x28308086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI *1'
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0x6f80, size 32, enabled
uhci3 at pci0:0:29:1: class=0x0c0300 card=0x01f91028 chip=0x28318086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI *2'
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0x6f60, size 32, enabled
uhci4 at pci0:0:29:2: class=0x0c0300 card=0x01f91028 chip=0x28328086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI *3'
class = serial bus
subclass = USB
bar [20] = type I/O Port, range 32, base 0x6f40, size 32, enabled
ehci1 at pci0:0:29:7: class=0x0c0320 card=0x01f91028 chip=0x28368086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB2 EHCI *1'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfed1c000, size 1024, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
pcib5 at pci0:0:30:0: class=0x060401 card=0x01f91028 chip=0x24488086 rev=0xf2 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
cap 0d[50] = PCI Bridge card=0x01f91028
isab0 at pci0:0:31:0: class=0x060100 card=0x01f91028 chip=0x28158086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801HEM (ICH8M-E) LPC Interface Controller'
class = bridge
subclass = PCI-ISA
cap 09[e0] = vendor (length 12) Intel cap 1 version 0
features: SATA RAID-5, Mobile, 4 PCI-e x1 slots, SATA RAID-0/1/10
atapci0 at pci0:0:31:1: class=0x01018a card=0x01f91028 chip=0x28508086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) Ultra ATA Storage Controllers'
class = mass storage
subclass = ATA
bar [10] = type I/O Port, range 32, base 0x1f0, size 8, enabled
bar [14] = type I/O Port, range 32, base 0x3f4, size 1, enabled
bar [18] = type I/O Port, range 32, base 0x170, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0x374, size 1, enabled
bar [20] = type I/O Port, range 32, base 0x6fa0, size 16, enabled
atapci1 at pci0:0:31:2: class=0x01018f card=0x01f91028 chip=0x28288086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801 (ICH8M) 3 port SATA Controller'
class = mass storage
subclass = ATA
bar [10] = type I/O Port, range 32, base 0x6eb0, size 8, enabled
bar [14] = type I/O Port, range 32, base 0x6eb8, size 4, enabled
bar [18] = type I/O Port, range 32, base 0x6ec0, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0x6ec8, size 4, enabled
bar [20] = type I/O Port, range 32, base 0x6ee0, size 16, enabled
bar [24] = type I/O Port, range 32, base 0xeff0, size 16, enabled
cap 01[70] = powerspec 3 supports D0 D3 current D0
ichsmb0 at pci0:0:31:3: class=0x0c0500 card=0x01f91028 chip=0x283e8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) SMBus Controller'
class = serial bus
subclass = SMBus
bar [10] = type Memory, range 32, base 0xf6ffbf00, size 256, enabled
bar [20] = type I/O Port, range 32, base 0x10c0, size 32, enabled
vgapci0 at pci0:1:0:0: class=0x030000 card=0x01f91028 chip=0x042b10de rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
device = 'NVIDIA Quadro NVS 135M (8400 ??)'
class = display
subclass = VGA
bar [10] = type Memory, range 32, base 0xf5000000, size 16777216, enabled
bar [1c] = type Memory, range 64, base 0xf2000000, size 33554432, enabled
bar [24] = type I/O Port, range 32, base 0xdf00, size 128, enabled
cap 01[60] = powerspec 2 supports D0 D3 current D0
cap 05[68] = MSI supports 1 message, 64 bit
cap 10[78] = PCI-Express 1 endpoint max data 128(128) link x16(x16)
none0 at pci0:12:0:0: class=0x028000 card=0x11218086 chip=0x42298086 rev=0x61 hdr=0x00
vendor = 'Intel Corporation'
device = 'Intel Wireless WiFi Link 4965AGN(supporting 802.11a/b/g/Draft-N) (Intel 4965AGN)'
class = network
bar [10] = type Memory, range 64, base 0xf1ffe000, size 8192, enabled
cap 01[c8] = powerspec 3 supports D0 D3 current D0
cap 05[d0] = MSI supports 1 message, 64 bit
cap 10[e0] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
bge0 at pci0:9:0:0: class=0x020000 card=0x01f91028 chip=0x167314e4 rev=0x02 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme BCM5755M Gigabit Ethernet PCIe'
class = network
subclass = ethernet
bar [10] = type Memory, range 64, base 0xf1ef0000, size 65536, enabled
cap 01[48] = powerspec 3 supports D0 D3 current D0
cap 03[50] = VPD
cap 09[58] = vendor (length 120)
cap 05[e8] = MSI supports 1 message, 64 bit enabled with 1 message
cap 10[d0] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
none1 at pci0:3:1:0: class=0x060700 card=0x01f91028 chip=0x71351217 rev=0x21 hdr=0x02
vendor = 'O2 Micro Inc'
device = 'MemoryCardBus Contoller (OZ711EZ1)'
class = bridge
subclass = PCI-CardBus
cap 01[a0] = powerspec 2 supports D0 D1 D2 D3 current D0
none2 at pci0:3:1:4: class=0x0c0010 card=0x01f91028 chip=0x00f71217 rev=0x02 hdr=0x00
vendor = 'O2 Micro Inc'
device = '1394 Open Host Controller Interface (0x00f71217)'
class = serial bus
subclass = FireWire
bar [10] = type Memory, range 32, base 0xf1dff000, size 4096, enabled
bar [14] = type Memory, range 32, base 0xf1dfe800, size 2048, enabled
cap 01[60] = powerspec 2 supports D0 D1 D2 D3 current D0
****************
and the corresponding output of lspci -v on Linux:
****************
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
Subsystem: Dell Device 01f9
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00: 86 80 00 2a 06 00 90 20 0c 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 f9 01
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f2000000-f6efffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00: 86 80 01 2a 07 05 10 00 0c 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 d0 d0 00 00
20: 00 f2 e0 f6 01 e0 f1 ef 00 00 00 00 00 00 00 00
30: 00 00 00 00 88 00 00 00 00 00 00 00 00 01 1a 00
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 01f9
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f20 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00: 86 80 34 28 05 00 80 02 02 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 21 6f 00 00 00 00 00 00 00 00 00 00 28 10 f9 01
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 01f9
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00: 86 80 35 28 05 00 80 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 6f 00 00 00 00 00 00 00 00 00 00 28 10 f9 01
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device 01f9
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00: 86 80 3a 28 06 01 90 02 02 20 03 0c 00 00 00 00
10: 00 c4 d1 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 f9 01
30: 00 00 00 00 50 00 00 00 00 00 00 00 09 03 00 00
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
Subsystem: Dell Dell Latitude D630
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f6ffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00: 86 80 4b 28 06 01 10 00 02 00 03 04 10 00 00 00
10: 04 c0 ff f6 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 f9 01
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00: 86 80 3f 28 07 05 10 00 02 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 0b 0b 00 f0 00 00 20
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 01 02 00
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f1f00000-f1ffffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00: 86 80 41 28 07 05 10 00 02 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 0c 0c 00 f0 00 00 00
20: f0 f1 f0 f1 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 02 02 00
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f1e00000-f1efffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00: 86 80 49 28 07 04 10 00 02 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 09 09 00 f0 00 00 00
20: e0 f1 e0 f1 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 02 02 00
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 01f9
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f80 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00: 86 80 30 28 05 00 80 02 02 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 6f 00 00 00 00 00 00 00 00 00 00 28 10 f9 01
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 01f9
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f60 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00: 86 80 31 28 05 00 80 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 61 6f 00 00 00 00 00 00 00 00 00 00 28 10 f9 01
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 01f9
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00: 86 80 32 28 05 00 80 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 41 6f 00 00 00 00 00 00 00 00 00 00 28 10 f9 01
30: 00 00 00 00 00 00 00 00 00 00 00 00 09 03 00 00
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device 01f9
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00: 86 80 36 28 06 01 90 02 02 20 03 0c 00 00 00 00
10: 00 c0 d1 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 f9 01
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f1d00000-f1dfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00: 86 80 48 24 07 00 10 00 f2 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 03 07 20 20 20 80 a2
20: d0 f1 d0 f1 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 02 00
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02)
Subsystem: Dell Device 01f9
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00: 86 80 15 28 07 01 10 02 02 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 f9 01
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device 01f9
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 6fa0 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix, piix
00: 86 80 50 28 05 00 80 02 02 8a 01 01 00 00 00 00
10: f1 01 00 00 f5 03 00 00 71 01 00 00 75 03 00 00
20: a1 6f 00 00 00 00 00 00 00 00 00 00 28 10 f9 01
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 00
00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell Device 01f9
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at 6eb0 [size=8]
Region 1: I/O ports at 6eb8 [size=4]
Region 2: I/O ports at 6ec0 [size=8]
Region 3: I/O ports at 6ec8 [size=4]
Region 4: I/O ports at 6ee0 [size=16]
Region 5: I/O ports at eff0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00: 86 80 28 28 07 00 b0 02 02 8f 01 01 00 00 00 00
10: b1 6e 00 00 b9 6e 00 00 c1 6e 00 00 c9 6e 00 00
20: e1 6e 00 00 f1 ef 00 00 00 00 00 00 28 10 f9 01
30: 00 00 00 00 70 00 00 00 00 00 00 00 0a 03 00 00
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
Subsystem: Dell Device 01f9
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f6ffbf00 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 10c0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00: 86 80 3e 28 03 01 80 02 02 00 05 0c 00 00 00 00
10: 00 bf ff f6 00 00 00 00 00 00 00 00 00 00 00 00
20: c1 10 00 00 00 00 00 00 00 00 00 00 28 10 f9 01
30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 00
01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 135M (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Device 01f9
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f2000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at df00 [size=128]
[virtual] Expansion ROM at f4000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia173, nvidia96xx, nvidia-current, nvidiafb, nouveau
00: de 10 2b 04 07 00 10 00 a1 00 00 03 00 00 00 00
10: 00 00 00 f5 0c 00 00 e0 00 00 00 00 04 00 00 f2
20: 00 00 00 00 01 df 00 00 00 00 00 00 28 10 f9 01
30: 00 00 00 00 60 00 00 00 00 00 00 00 05 01 00 00
03:01.0 CardBus bridge: O2 Micro, Inc. Cardbus bridge (rev 21)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f1d00000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: f0000000-f03ff000 (prefetchable)
Memory window 1: f0400000-f07ff000
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
<access denied to the rest>
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00: 17 12 35 71 87 00 10 04 21 00 07 06 00 a8 82 00
10: 00 00 d0 f1 a0 00 00 02 03 04 07 b0 00 00 00 f0
20: 00 f0 3f f0 00 00 40 f0 00 f0 7f f0 01 20 00 00
30: fd 20 00 00 01 24 00 00 fd 24 00 00 ff 01 c0 05
03:01.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) (prog-if 10 [OHCI])
Subsystem: Dell Device 01f9
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f1dff000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at f1dfe800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
00: 17 12 f7 00 17 01 18 02 02 10 00 0c 10 40 00 00
10: 00 f0 df f1 00 e8 df f1 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 f9 01
30: 00 00 00 00 60 00 00 00 00 00 00 00 09 01 00 00
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express (rev 02)
Subsystem: Dell Device 01f9
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f1ef0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
00: e4 14 73 16 06 05 10 00 02 00 00 02 10 00 00 00
10: 04 00 ef f1 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 f9 01
30: 00 00 80 54 48 00 00 00 00 00 00 00 03 01 00 00
0c:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
Subsystem: Intel Corporation Device 1121
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f1ffe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
Kernel modules: iwlagn
00: 86 80 29 42 06 01 10 00 61 00 80 02 10 00 00 00
10: 04 e0 ff f1 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 21 11
30: 00 00 00 00 c8 00 00 00 00 00 00 00 03 01 00 00
****************
Finally, this is the output of "devinfo -rv":
****************
nexus0
apic0
legacy0
ram0
I/O memory addresses:
0x0-0x9efff
0x100000-0x7fe5a7ff
acpi0
Interrupt request lines:
9
I/O ports:
0x20-0x21
0x2e-0x2f
0x4e-0x4f
0x86
0x92
0xa0-0xa1
0xb2-0xb3
0x4d0-0x4d1
0x809
0x900-0x97f
0xc80-0xcaf
0xcb0-0xcbb
0xcc0-0xcff
0x1000-0x1005
0x1006-0x1007
0x1008-0x1059
0x1060-0x107f
0x1080-0x10bf
0x10c0-0x10df
0xf400-0xf4fe
I/O memory addresses:
0x9f000-0x9ffff
0xc0000-0xcffff
0xe0000-0xfffff
0x7fe5a800-0x7fefffff
0x7ff00000-0x806fffff
0xf8000000-0xfbffffff
0xfec00000-0xfec0ffff
0xfed18000-0xfed1bfff
0xfed20000-0xfed3ffff
0xfed40000-0xfed44fff
0xfed45000-0xfed8ffff
0xfeda0000-0xfeda3fff
0xfeda4000-0xfeda4fff
0xfeda5000-0xfeda5fff
0xfeda6000-0xfeda6fff
0xfee00000-0xfee0ffff
0xffa00000-0xffbfffff
0xffe00000-0xffffffff
cpu0 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU0
ACPI I/O ports:
0x1014
0x1016
acpi_throttle0
est0
p4tcc0
acpi_perf0
cpufreq0
cpu1 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU1
ACPI I/O ports:
0x1014
0x1016
acpi_throttle1
est1
p4tcc1
acpi_perf1
cpufreq1
pcib0 pnpinfo _HID=PNP0A03 _UID=0 at handle=\_SB_.PCI0
pci0
I/O ports:
0x170-0x177
0x376
I/O memory addresses:
0xf6ffbf00-0xf6ffbfff
hostb0 pnpinfo vendor=0x8086 device=0x2a00 subvendor=0x1028 subdevice=0x01f9 class=0x060000 at slot=0 function=0
pcib1 pnpinfo vendor=0x8086 device=0x2a01 subvendor=0x1028 subdevice=0x01f9 class=0x060400 at slot=1 function=0 handle=\_SB_.PCI0.AGP_
pci1
I/O ports:
0xdf00-0xdf7f
I/O memory addresses:
0xe0000000-0xefffffff
0xf2000000-0xf3ffffff
0xf5000000-0xf5ffffff
vgapci0 pnpinfo vendor=0x10de device=0x042b subvendor=0x1028 subdevice=0x01f9 class=0x030000 at slot=0 function=0 handle=\_SB_.PCI0.AGP_.VID_
drm0
uhci0 pnpinfo vendor=0x8086 device=0x2834 subvendor=0x1028 subdevice=0x01f9 class=0x0c0300 at slot=26 function=0 handle=\_SB_.PCI0.USB4
Interrupt request lines:
20
I/O ports:
0x6f20-0x6f3f
usb0
uhub0
uhci1 pnpinfo vendor=0x8086 device=0x2835 subvendor=0x1028 subdevice=0x01f9 class=0x0c0300 at slot=26 function=1 handle=\_SB_.PCI0.USB5
Interrupt request lines:
21
I/O ports:
0x6f00-0x6f1f
usb1
uhub1
ehci0 pnpinfo vendor=0x8086 device=0x283a subvendor=0x1028 subdevice=0x01f9 class=0x0c0320 at slot=26 function=7 handle=\_SB_.PCI0.EHC2
Interrupt request lines:
22
I/O memory addresses:
0xfed1c400-0xfed1c7ff
usb2
uhub2
hdac0 pnpinfo vendor=0x8086 device=0x284b subvendor=0x1028 subdevice=0x01f9 class=0x040300 at slot=27 function=0 handle=\_SB_.PCI0.AZAL
Interrupt request lines:
256
I/O memory addresses:
0xf6ffc000-0xf6ffffff
pcm0
pcib2 pnpinfo vendor=0x8086 device=0x283f subvendor=0x1028 subdevice=0x01f9 class=0x060400 at slot=28 function=0 handle=\_SB_.PCI0.RP01
pci11
pcib3 pnpinfo vendor=0x8086 device=0x2841 subvendor=0x1028 subdevice=0x01f9 class=0x060400 at slot=28 function=1 handle=\_SB_.PCI0.RP02
pci12
I/O memory addresses:
0xf1ffe000-0xf1ffffff
unknown pnpinfo vendor=0x8086 device=0x4229 subvendor=0x8086 subdevice=0x1121 class=0x028000 at slot=0 function=0 handle=\_SB_.PCI0.RP02.PXS2
pcib4 pnpinfo vendor=0x8086 device=0x2849 subvendor=0x1028 subdevice=0x01f9 class=0x060400 at slot=28 function=5 handle=\_SB_.PCI0.RP06
pci9
bge0 pnpinfo vendor=0x14e4 device=0x1673 subvendor=0x1028 subdevice=0x01f9 class=0x020000 at slot=0 function=0 handle=\_SB_.PCI0.RP06.PXS6
Interrupt request lines:
257
I/O memory addresses:
0xf1ef0000-0xf1efffff
miibus0
brgphy0 pnpinfo oui=0x50ef model=0xc rev=0x0 at phyno=1
uhci2 pnpinfo vendor=0x8086 device=0x2830 subvendor=0x1028 subdevice=0x01f9 class=0x0c0300 at slot=29 function=0 handle=\_SB_.PCI0.USB1
Interrupt request lines:
20
I/O ports:
0x6f80-0x6f9f
usb3
uhub3
uhci3 pnpinfo vendor=0x8086 device=0x2831 subvendor=0x1028 subdevice=0x01f9 class=0x0c0300 at slot=29 function=1 handle=\_SB_.PCI0.USB2
Interrupt request lines:
21
I/O ports:
0x6f60-0x6f7f
usb4
uhub4
uhci4 pnpinfo vendor=0x8086 device=0x2832 subvendor=0x1028 subdevice=0x01f9 class=0x0c0300 at slot=29 function=2 handle=\_SB_.PCI0.USB3
Interrupt request lines:
22
I/O ports:
0x6f40-0x6f5f
usb5
uhub5
uhub7 pnpinfo vendor=0x0b97 product=0x7761 devclass=0x09 devsubclass=0x00 release=0x0110 sernum="" at port=0
unknown pnpinfo vendor=0x0b97 product=0x7772 devclass=0x00 devsubclass=0x00 release=0x0110 sernum="" at port=1
ehci1 pnpinfo vendor=0x8086 device=0x2836 subvendor=0x1028 subdevice=0x01f9 class=0x0c0320 at slot=29 function=7 handle=\_SB_.PCI0.EHCI
Interrupt request lines:
20
I/O memory addresses:
0xfed1c000-0xfed1c3ff
usb6
uhub6
umass0 pnpinfo vendor=0x13fe product=0x1d00 devclass=0x00 devsubclass=0x00 release=0x0110 sernum="077203440439" intclass=0x08 intsubclass=0x06 at port=2 interface=0
pcib5 pnpinfo vendor=0x8086 device=0x2448 subvendor=0x1028 subdevice=0x01f9 class=0x060401 at slot=30 function=0 handle=\_SB_.PCI0.PCIE
pci3
I/O memory addresses:
0xf1dfe800-0xf1dfefff
0xf1dff000-0xf1dfffff
unknown pnpinfo vendor=0x1217 device=0x7135 subvendor=0x1028 subdevice=0x01f9 class=0x060700 at slot=1 function=0 handle=\_SB_.PCI0.PCIE.CRD0
unknown pnpinfo vendor=0x1217 device=0x00f7 subvendor=0x1028 subdevice=0x01f9 class=0x0c0010 at slot=1 function=4
isab0 pnpinfo vendor=0x8086 device=0x2815 subvendor=0x1028 subdevice=0x01f9 class=0x060100 at slot=31 function=0 handle=\_SB_.PCI0.ISAB
isa0
fdc0
ppc0
sc0
sio1
sio2
sio3
vga0
I/O ports:
0x3c0-0x3df
I/O memory addresses:
0xa0000-0xbffff
orm0
ACPI I/O memory addresses:
0xc0000-0xccfff
0xcd000-0xcffff
atapci0 pnpinfo vendor=0x8086 device=0x2850 subvendor=0x1028 subdevice=0x01f9 class=0x01018a at slot=31 function=1 handle=\_SB_.PCI0.IDE1
I/O ports:
0x1f0-0x1f7
0x3f6
0x6fa0-0x6faf
ata0
Interrupt request lines:
14
unknown
atapicam0
atapci1 pnpinfo vendor=0x8086 device=0x2828 subvendor=0x1028 subdevice=0x01f9 class=0x01018f at slot=31 function=2 handle=\_SB_.PCI0.IDE0
Interrupt request lines:
18
I/O ports:
0x6eb0-0x6eb7
0x6eb8-0x6ebb
0x6ec0-0x6ec7
0x6ec8-0x6ecb
0x6ee0-0x6eef
0xeff0-0xefff
ata2
ad4
subdisk4
atapicam1
ata3
atapicam2
ichsmb0 pnpinfo vendor=0x8086 device=0x283e subvendor=0x1028 subdevice=0x01f9 class=0x0c0500 at slot=31 function=3
Interrupt request lines:
17
ACPI I/O ports:
0x10c0-0x10df
smbus0
psmcpnp0 pnpinfo _HID=PNP0F13 _UID=0 at handle=\_SB_.PCI0.ISAB.PS2M
Interrupt request lines:
12
atkbdc0 pnpinfo _HID=PNP0303 _UID=0 at handle=\_SB_.PCI0.ISAB.KBC_
I/O ports:
0x60
0x64
atkbd0
Interrupt request lines:
1
psm0
Interrupt request lines:
12
attimer0 pnpinfo _HID=PNP0B00 _UID=0 at handle=\_SB_.PCI0.ISAB.RTC_
attimer1 pnpinfo _HID=PNP0100 _UID=0 at handle=\_SB_.PCI0.ISAB.TMR_
unknown pnpinfo _HID=PNP0800 _UID=0 at handle=\_SB_.PCI0.ISAB.SPKR
acpi_sysresource0 pnpinfo _HID=PNP0C01 _UID=4 at handle=\_SB_.PCI0.ISAB.MB4_
unknown pnpinfo _HID=PNP0000 _UID=0 at handle=\_SB_.PCI0.ISAB.PIC_
atdma0 pnpinfo _HID=PNP0200 _UID=0 at handle=\_SB_.PCI0.ISAB.MAD_
fpupnp0 pnpinfo _HID=PNP0C04 _UID=0 at handle=\_SB_.PCI0.ISAB.COPR
acpi_hpet0 pnpinfo _HID=PNP0103 _UID=0 at handle=\_SB_.PCI0.ISAB.HPET
I/O memory addresses:
0xfed00000-0xfed003ff
sio0 pnpinfo _HID=PNP0501 _UID=0 at handle=\_SB_.PCI0.ISAB.UAR1
Interrupt request lines:
4
I/O ports:
0x3f8-0x3ff
unknown pnpinfo _HID=PNP0401 _UID=0 at handle=\_SB_.PCI0.ISAB.ECP_
unknown pnpinfo _HID=BCM0102 _UID=0 at handle=\_SB_.PCI0.ISAB.TPM_
acpi_sysresource1 pnpinfo _HID=PNP0C01 _UID=5 at handle=\_SB_.PCI0.ISAB.FTPM
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PCIE.CRD1
unknown pnpinfo _HID=PNP0C15 _UID=429496726 at handle=\_SB_.PCI0.PCIE.GDCK
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PCIE.DCKS
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB1.HUB0
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB1.HUB0.CH00
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB1.HUB0.CH01
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB2.HUB1
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB2.HUB1.CH10
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB2.HUB1.CH11
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB3.HUB2
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB3.HUB2.CH20
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB3.HUB2.CH21
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB4.HUB3
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB4.HUB3.CH30
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB4.HUB3.CH31
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB5.HUB6
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB5.HUB6.CH60
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB5.HUB6.CH61
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EHC2.HUB7
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EHC2.HUB7.CH00
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EHC2.HUB7.CH01
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EHC2.HUB7.CH10
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EHC2.HUB7.CH11
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EHCI.HUB7
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EHCI.HUB7.CH00
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EHCI.HUB7.CH01
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EHCI.HUB7.CH10
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EHCI.HUB7.CH11
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EHCI.HUB7.CH20
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EHCI.HUB7.CH21
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.PRI_
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.SEC0
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.SEC0.MAST
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE1.PRI_
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE1.PRI_.MAST
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE1.SEC0
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.AGP_.VID_.TV__
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.AGP_.VID_.CRT_
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.AGP_.VID_.LCD_
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.AGP_.VID_.DVI_
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.VID_
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.VID_.TV__
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.VID_.CRT_
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.VID_.LCD_
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.VID_.DVI_
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.VID2
acpi_sysresource2 pnpinfo _HID=PNP0C01 _UID=2 at handle=\_SB_.PCI0.MB2_
acpi_sysresource3 pnpinfo _HID=PNP0C01 _UID=3 at handle=\_SB_.PCI0.MB3_
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.RP01.PXS1
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.RP03
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.RP03.PXS3
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.RP04
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.RP04.PXS4
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.RP05
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.RP05.PXS5
pci_link0 pnpinfo _HID=PNP0C0F _UID=1 at handle=\_SB_.PCI0.LNKA
pci_link1 pnpinfo _HID=PNP0C0F _UID=2 at handle=\_SB_.PCI0.LNKB
pci_link2 pnpinfo _HID=PNP0C0F _UID=3 at handle=\_SB_.PCI0.LNKC
pci_link3 pnpinfo _HID=PNP0C0F _UID=4 at handle=\_SB_.PCI0.LNKD
pci_link4 pnpinfo _HID=PNP0C0F _UID=5 at handle=\_SB_.PCI0.LNKE
pci_link5 pnpinfo _HID=PNP0C0F _UID=6 at handle=\_SB_.PCI0.LNKF
pci_link6 pnpinfo _HID=PNP0C0F _UID=7 at handle=\_SB_.PCI0.LNKG
pci_link7 pnpinfo _HID=PNP0C0F _UID=8 at handle=\_SB_.PCI0.LNKH
acpi_sysresource4 pnpinfo _HID=PNP0C01 _UID=1 at handle=\_SB_.MB1_
acpi_lid0 pnpinfo _HID=PNP0C0D _UID=0 at handle=\_SB_.LID_
acpi_button0 pnpinfo _HID=PNP0C0C _UID=0 at handle=\_SB_.PBTN
acpi_button1 pnpinfo _HID=PNP0C0E _UID=0 at handle=\_SB_.SBTN
acpi_acad0 pnpinfo _HID=ACPI0003 _UID=0 at handle=\_SB_.AC__
battery0 pnpinfo _HID=PNP0C0A _UID=1 at handle=\_SB_.BAT0
battery1 pnpinfo _HID=PNP0C0A _UID=2 at handle=\_SB_.BAT1
unknown pnpinfo _HID=pnp0c14 _UID=0 at handle=\_SB_.AMW0
acpi_tz0 pnpinfo _HID=none _UID=0 at handle=\_TZ_.THM_
acpi_timer0 pnpinfo unknown at unknown
ACPI I/O ports:
0x1008-0x100b
cryptosoft0
****************
>How-To-Repeat:
Launch X on a Dell Latitude 630 (and perhaps other machines as well) having 4 Gb with the "nv" video driver. X won't start and report that it can't determine the amount of available video memory.
>Fix:
Workaround: When 2 Gb are removed from the laptop, X fires up normally without any error.
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-ports-bugs
mailing list