ports/110646: hal/dbus crashes when connecting Zoom H4 USB mass storage device

Chess Griffin chessg at gmail.com
Wed Mar 21 23:00:10 UTC 2007 

>Number:         110646
>Category:       ports
>Synopsis:       hal/dbus crashes when connecting Zoom H4 USB mass storage device
>Confidential:   no
>Severity:       serious
>Priority:       low
>Responsible:    freebsd-ports-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Wed Mar 21 23:00:10 GMT 2007
>Closed-Date:
>Last-Modified:
>Originator:     Chess Griffin
>Release:        6.2
>Organization:
>Environment:
FreeBSD bob.localdomain 6.2-RELEASE-p2 FreeBSD 6.2-RELEASE-p2 #0: Mon Mar 12 23:29:26 EDT 2007     root at bob.localdomain:/usr/obj/usr/src/sys/CNG  i386

>Description:
When I connect the Zoom H4 digital recorder, which should mount as a standard USB mass storage device (it does in Linux), I get hal and dbus crashes and my DE (GNOME or Xfce) hang.  I have another USB mass storage device (Cowon iAudio 5) which works fine.

My /etc/rc.conf has, among other things:

dbus_enable="YES"
polkitd_enable="YES"
hald_enable="YES" 
devfs_system_ruleset="localrules"

My /etc/devfs.rules has:
[localrules=1]
add path 'da*' mode 0660 group operator

dmesg output:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p2 #0: Mon Mar 12 23:29:26 EDT 2007
    root at bob.localdomain:/usr/obj/usr/src/sys/CNG
ACPI APIC Table: <DELL   GX620  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 3.40GHz (3392.53-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf64  Stepping = 4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe49d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>,<b15>>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 2137546752 (2038 MB)
avail memory = 2082390016 (1985 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <DELL GX620  > on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <display> at device 2.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5750 A1, ASIC rev. 0x4001> mem 0xfe8f0000-0xfe8fffff irq 16 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:18:8b:18:02:47
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
uhci0: <UHCI (generic) USB controller> port 0xff80-0xff9f irq 21 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xff60-0xff7f irq 22 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xff20-0xff3f irq 23 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xffa80800-0xffa80bff irq 21 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: waiting for BIOS to give up control
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcm0: <Intel ICH7 (82801GB)> port 0xec00-0xecff,0xe8c0-0xe8ff mem 0xfeabfa00-0xfeabfbff,0xfeabf900-0xfeabf9ff irq 23 at device 30.2 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf irq 16 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7 SATA300 controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfea0-0xfeaf irq 20 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xcc7ff,0xcc800-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB Receiver, rev 1.10/25.00, addr 2, iclass 3/1
ums0: 16 buttons and Z dir.
ukbd0: Chicony Saitek Eclipse Keyboard, rev 2.00/1.30, addr 3, iclass 3/1
kbd2 at ukbd0
uhid0: Chicony Saitek Eclipse Keyboard, rev 2.00/1.30, addr 3, iclass 3/1
Timecounters tick every 1.000 msec
acd0: DVDR <NEC DVD+/-RW ND-3530A/103C> at ata0-master UDMA33
ad4: 152587MB <SAMSUNG HD160JJ/P ZM100-34> at ata2-master SATA150
ad5: 152587MB <SAMSUNG HD160JJ/P ZM100-34> at ata2-slave SATA150
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s2a
bge0: link state changed to UP


output from /var/log/messages when crash occurs (note the Cowon iAudio 5 mounts fine, but the Zoom crashes):
Mar 21 17:12:58 bob ntpd[769]: time reset -0.289583 s
Mar 21 17:12:58 bob ntpd[769]: kernel time sync disabled 2041
Mar 21 17:17:53 bob kernel: umass0: COWON iAUDIO 5, rev 2.00/1.10, addr 2
Mar 21 17:17:54 bob kernel: da1 at umass-sim0 bus 0 target 0 lun 0
Mar 21 17:17:54 bob kernel: da1: <COWON iAUDIO 5 0100> Removable Direct Access SCSI-4 device 
Mar 21 17:17:54 bob kernel: da1: 40.000MB/s transfers
Mar 21 17:17:54 bob kernel: da1: 992MB (2032384 512 byte sectors: 64H 32S/T 992C)
Mar 21 17:18:20 bob kernel: umass0: at uhub4 port 4 (addr 2) disconnected
Mar 21 17:18:20 bob kernel: (da1:umass-sim0:0:0:0): lost device
Mar 21 17:18:20 bob kernel: (da1:umass-sim0:0:0:0): removing device entry
Mar 21 17:18:20 bob kernel: umass0: detached
Mar 21 17:18:31 bob su: chess to root on /dev/ttyp0
Mar 21 17:18:45 bob kernel: g_vfs_done():da0s1[READ(offset=2046976, length=4096)]error = 6
Mar 21 17:18:45 bob kernel: g_vfs_done():da0s1[READ(offset=2046976, length=4096)]error = 6
Mar 21 17:35:27 bob ntpd[769]: kernel time sync enabled 2001
Mar 21 17:40:10 bob kernel: umass0: ZOOM Corporation H4, rev 1.01/0.00, addr 2
Mar 21 17:40:10 bob kernel: da1 at umass-sim0 bus 0 target 0 lun 0
Mar 21 17:40:10 bob kernel: da1: <ZOOM H4 SD R&W 0.01> Removable Direct Access SCSI-2 device 
Mar 21 17:40:10 bob kernel: da1: 1.000MB/s transfers
Mar 21 17:40:10 bob kernel: da1: 1964MB (4022272 512 byte sectors: 255H 63S/T 250C)
Mar 21 17:40:12 bob kernel: pid 1394 (hald-probe-volume), uid 0: exited on signal 6 (core dumped)
Mar 21 17:40:12 bob kernel: pid 1245 (gnome-vfs-daemon), uid 1001: exited on signal 6
Mar 21 17:40:12 bob kernel: pid 1400 (gnome-vfs-daemon), uid 1001: exited on signal 6
Mar 21 17:40:12 bob kernel: pid 1402 (gnome-vfs-daemon), uid 1001: exited on signal 6
Mar 21 17:40:12 bob kernel: pid 1404 (gnome-vfs-daemon), uid 1001: exited on signal 6
Mar 21 17:40:13 bob kernel: pid 1410 (gnome-vfs-daemon), uid 1001: exited on signal 6
Mar 21 17:40:13 bob kernel: pid 1412 (gnome-vfs-daemon), uid 1001: exited on signal 6

<snip>

Mar 21 17:41:48 bob kernel: pid 9163 (gnome-vfs-daemon), uid 1001: exited on signal 6
Mar 21 17:41:48 bob kernel: pid 9165 (gnome-vfs-daemon), uid 1001: exited on signal 6
Mar 21 17:41:48 bob kernel: pid 9167 (gnome-vfs-daemon), uid 1001: exited on signal 6
Mar 21 17:41:48 bob kernel: pid 9169 (gnome-vfs-daemon), uid 1001: exited on signal 6
Mar 21 17:41:48 bob kernel: umass0: at uhub1 port 2 (addr 2) disconnected
Mar 21 17:41:48 bob kernel: (da1:umass-sim0:0:0:0): lost device
Mar 21 17:41:48 bob kernel: (da1:umass-sim0:0:0:0): removing device entry
Mar 21 17:41:48 bob kernel: umass0: detached
>How-To-Repeat:
Connect Zoom H4 via USB cable.
>Fix:

>Release-Note:
>Audit-Trail:
>Unformatted:

More information about the freebsd-ports-bugs mailing list