[RELEASE - 83amd64-default] Build failed for xorp-1.6_1 during build

Wed Jul 17 21:06:08 UTC 2013

Maintainer:     ports at FreeBSD.org
Last committer: eadler at FreeBSD.org
Ident:          $FreeBSD: head/net/xorp/Makefile 319655 2013-06-02 13:39:22Z eadler $
Log URL:        http://beefy2.isc.freebsd.org/bulk/83amd64-default/2013-07-17_14h39m18s/logs/xorp-1.6_1.log
Build URL:      http://beefy2.isc.freebsd.org/bulk/83amd64-default/2013-07-17_14h39m18s
Log:

====>> Building net/xorp
build started at Wed Jul 17 21:01:24 UTC 2013
port directory: /usr/ports/net/xorp
building for: FreeBSD 83amd64-default-job-01 8.3-RELEASE FreeBSD 8.3-RELEASE amd64
maintained by: ports at FreeBSD.org
Makefile ident:      $FreeBSD: head/net/xorp/Makefile 319655 2013-06-02 13:39:22Z eadler $
Poudriere version: 3.1-pre

---Begin Environment---
OSVERSION=803000
UNAME_v=FreeBSD 8.3-RELEASE
UNAME_r=8.3-RELEASE
FTP_PASSIVE_MODE=YES
BLOCKSIZE=K
MAIL=/var/mail/root
STATUS=1
MASTERMNT=/usr/local/poudriere/data/build/83amd64-default/ref
PKG_EXT=txz
FORCE_PACKAGE=yes
tpid=15523
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/root/bin
POUDRIERE_BUILD_TYPE=bulk
NBPARALLEL=24
PKGNG=1
PKGNAME=xorp-1.6_1
PKG_DELETE=/usr/local/sbin/pkg delete -y -f
PKG_ADD=/usr/local/sbin/pkg add
PWD=/root
MASTERNAME=83amd64-default
USER=root
HOME=/root
POUDRIERE_VERSION=3.1-pre
SKIPSANITY=0
LOCALBASE=/usr/local
PACKAGE_BUILDING=yes
---End Environment---

---Begin OPTIONS List---
===> The following configuration options are available for xorp-1.6_1:
     ADVMCAST=on: Build with Advanced Multicast API
     DEBUG=off: Install debug symbols
     IPV6=on: IPv6 protocol support
     OPTIMIZED_CFLAGS=on: Use extra compiler optimizations
     PROFILE=on: Build with profiling support
     SNMP=on: SNMP protocol support
     TEST=on: Build and/or run tests
===> Use 'make config' to modify these settings
---End OPTIONS List---

--CONFIGURE_ARGS--
--prefix=/usr/local/xorp			 --with-comment='FreeBSD port: xorp-1.6_1'	 --with-openssl=/usr --enable-advanced-mcast-api --enable-ipv6 --with-snmp					  --with-path-to-snmpd=/usr/local/sbin				  --with-path-to-net-snmpd-config=/usr/local/bin/net-snmp-config  --enable-shared --enable-optimize --disable-debug --enable-profile --prefix=/usr/local ${_LATE_CONFIGURE_ARGS}
--End CONFIGURE_ARGS--

--CONFIGURE_ENV--
TMPDIR="/tmp" TMPDIR="/tmp" MAKE=gmake TMPDIR="/tmp" SHELL=/bin/sh CONFIG_SHELL=/bin/sh CONFIG_SITE=/usr/ports/Templates/config.site lt_cv_sys_max_cmd_len=262144
--End CONFIGURE_ENV--

--MAKE_ENV--
TMPDIR="/tmp" TMPDIR="/tmp" OPENSSLLIB=/usr/lib OPENSSLINC=/usr/include  OPENSSLBASE=/usr OPENSSLDIR=/etc/ssl TMPDIR="/tmp" SHELL=/bin/sh NO_LINT=YES PREFIX=/usr/local  LOCALBASE=/usr/local  LIBDIR="/usr/lib"  CC="cc" CFLAGS="-O2 -pipe -fno-strict-aliasing"  CPP="cpp" CPPFLAGS=""  LDFLAGS=" -Wl,-rpath=/usr/lib:/usr/local/lib"  CXX="c++" CXXFLAGS="-O2 -pipe -fno-strict-aliasing -Wno-uninitialized"  MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install  -s -o root -g wheel -m 555"  BSD_INSTALL_LIB="install  -s -o root -g wheel -m 444"  BSD_INSTALL_SCRIPT="install  -o root -g wheel -m 555"  BSD_INSTALL_DATA="install  -o root -g wheel -m 444"  BSD_INSTALL_MAN="install  -o root -g wheel -m 444"
--End MAKE_ENV--

--SUB_LIST--
PREFIX=/usr/local
LOCALBASE=/usr/local
DATADIR=/usr/local/share/xorp
DOCSDIR=/usr/local/share/doc/xorp
EXAMPLESDIR=/usr/local/share/examples/xorp
WWWDIR=/usr/local/www/xorp
ETCDIR=/usr/local/etc/xorp
--End SUB_LIST--

---Begin make.conf---
USE_PACKAGE_DEPENDS=yes
BATCH=yes
WRKDIRPREFIX=/wrkdirs
PACKAGES=/packages
DISTDIR=/distfiles
#### /usr/local/etc/poudriere.d/make.conf ####
WITH_PKGNG=yes
NO_RESTRICTED=yes
DISABLE_MAKE_JOBS=yes
---End make.conf---
===>  Cleaning for xorp-1.6_1
=======================<phase: check-config   >============================
=========================================================================
=======================<phase: pkg-depends    >============================
===>   xorp-1.6_1 depends on file: /usr/local/sbin/pkg - not found
===>    Verifying install for /usr/local/sbin/pkg in /usr/ports/ports-mgmt/pkg
===>   Installing existing package /packages/All/pkg-1.1.4_1.txz
Installing pkg-1.1.4_1... done
If you are upgrading from the old package format, first run:

  # pkg2ng
===>   Returning to build of xorp-1.6_1
=========================================================================
=======================<phase: fetch-depends  >============================
=========================================================================
=======================<phase: fetch          >============================
XORP does not currently follow the hier(7) filesystem layout.
It will therefore install all its directories relative to /usr/local.
If you do not want this, hit ^C now and set PREFIX in the
build environment to something other than /usr/local.

If you plan to build with SNMP support, please ensure that
the net-mgmt/net-snmp port is already installed under /usr/local
before doing this.
===>  License GPLv2 accepted by the user
===> Fetching all distfiles required by xorp-1.6_1 for building
=========================================================================
=======================<phase: checksum       >============================
XORP does not currently follow the hier(7) filesystem layout.
It will therefore install all its directories relative to /usr/local.
If you do not want this, hit ^C now and set PREFIX in the
build environment to something other than /usr/local.

If you plan to build with SNMP support, please ensure that
the net-mgmt/net-snmp port is already installed under /usr/local
before doing this.
===>  License GPLv2 accepted by the user
===> Fetching all distfiles required by xorp-1.6_1 for building
=> SHA256 Checksum OK for xorp-1.6.tar.gz.
=========================================================================
=======================<phase: extract-depends>============================
=========================================================================
=======================<phase: extract        >============================
XORP does not currently follow the hier(7) filesystem layout.
It will therefore install all its directories relative to /usr/local.
If you do not want this, hit ^C now and set PREFIX in the
build environment to something other than /usr/local.

If you plan to build with SNMP support, please ensure that
the net-mgmt/net-snmp port is already installed under /usr/local
before doing this.
===>  License GPLv2 accepted by the user
===> Fetching all distfiles required by xorp-1.6_1 for building
===>  Extracting for xorp-1.6_1
=> SHA256 Checksum OK for xorp-1.6.tar.gz.
=========================================================================
=======================<phase: patch-depends  >============================
=========================================================================
=======================<phase: patch          >============================
===>  Patching for xorp-1.6_1
===>  Applying FreeBSD patches for xorp-1.6_1
=========================================================================
=======================<phase: build-depends  >============================
===>   xorp-1.6_1 depends on file: /usr/local/sbin/snmpd - not found
===>    Verifying install for /usr/local/sbin/snmpd in /usr/ports/net-mgmt/net-snmp
===>   Installing existing package /packages/All/net-snmp-5.7.2_3.txz
Installing net-snmp-5.7.2_3...Installing perl-5.14.4...Removing stale symlinks from /usr/bin...
    Skipping /usr/bin/perl
    Skipping /usr/bin/perl5
Done.
Creating various symlinks in /usr/bin...
    Symlinking /usr/local/bin/perl5.14.4 to /usr/bin/perl
    Symlinking /usr/local/bin/perl5.14.4 to /usr/bin/perl5
Done.
Cleaning up /etc/make.conf... Done.
Spamming /etc/make.conf... Done.
Cleaning up /etc/manpath.config... Done.
Spamming /etc/manpath.config... Done.
 done
mkdir: /var/agentx: File exists
 done
**** This port installs snmp daemon, header files and libraries but don't
     invokes snmpd by default.
     If you want to invoke snmpd and/or snmptrapd at startup, put these
     lines into /etc/rc.conf.

	snmpd_enable="YES"
	snmpd_flags="-a"
	snmpd_conffile="/usr/local/share/snmp/snmpd.conf /etc/snmpd.conf"
	snmptrapd_enable="YES"
	snmptrapd_flags="-a -p /var/run/snmptrapd.pid"

**** You may specify the following make variables:

	NET_SNMP_SYS_CONTACT="zi at FreeBSD.org"
	NET_SNMP_SYS_LOCATION="USA"
	DEFAULT_SNMP_VERSION=3
	NET_SNMP_MIB_MODULES="host smux mibII/mta_sendmail ucd-snmp/diskio"
	NET_SNMP_LOGFILE=/var/log/snmpd.log
	NET_SNMP_PERSISTENTDIR=/var/net-snmp

     to define default values (or overwriting defaults).  At least
     setting first two variables, you will not be prompted during
     configuration process.  You may also set

	BATCH="yes"

     to avoid interactive configuration.
===>   Returning to build of xorp-1.6_1
===>   xorp-1.6_1 depends on file: /usr/local/bin/python - not found
===>    Verifying install for /usr/local/bin/python in /usr/ports/lang/python
===>   Installing existing package /packages/All/python-2.7,2.txz
Installing python-2.7,2...Installing python27-2.7.5_1...Installing gettext-0.18.3...Installing libiconv-1.14_1... done
 done
 done
 done
====
<snip>