one ADSL connection with 10 static IPs and PF

[Mostaf Faridi]

Thanks all,
So I must choose PPoe,  for this problem,  but what I must do when I want
use all ten static IPs?
On Nov 27, 2011 9:28 PM, "Fatal Error" <jinhitman at gmail.com> wrote:

> On 11/27/2011 04:05 AM, Gholam Mostafa Faridi wrote:
>
>> we had Leased line before and we had 27 static IPs before , but our ISP
>> do not support is very well , and we change our ISP and we buy ADSL
>> connection with 10 static IPs , my NAT Server is OpenBSD 5 , and I will
>> change it FreeBSD 8.2 .
>> Can I do this with FreeBSD 8.2 and PF ? Do I have to add some options in
>> Kernel or no ?
>> before we change our connection type from Leased line to ADSL , we have
>> cisco 800 router and Leased line connect to cisco 800 and after that we
>> connect it to our NAT server , every thing was good and it work like charm
>> , but after change connection type , ISP give us Zyxcel ADSL modem with 10
>> startic IP , and our IPS do not say what we must do with this ADSL modem
>> and these IPs.
>> we do not know , which mode we must use in ADSL modem , PPoE or bridge ?
>> we do not know use PPoE or Bridge mode with ADSL modem and our ISP do not
>> give us enough information , if I want make NAT server with PF with mode I
>> must set in ADSL modem ? PPoE or bridge ?
>> we do not know how we must config our NAT server ,
>> we do not know we need ppp or no ?
>> we do not konw how we must config PF .
>> we have to use 10 static IPs and we can not use one static IP , because
>> of our policy .
>> which options , I must add to my PF.conf
>> ______________________________**_________________
>> freebsd-pf at freebsd.org mailing list
>> http://lists.freebsd.org/**mailman/listinfo/freebsd-pf<http://lists.freebsd.org/mailman/listinfo/freebsd-pf>
>> To unsubscribe, send any mail to "freebsd-pf-unsubscribe@**freebsd.org<freebsd-pf-unsubscribe at freebsd.org>
>> "
>>
> Hi.
> I had same problem with Zyxcel Brand Adsl Modem two weeks ago. I did not
> find true options how to use bridge mode option with PPPoE Protocol on
> Zyxcel P-600 with same time and together. Because the Zyxel P-600 doesn't
> support Bridge Mode Option on PPPoE. Than I choosed PPPoE. At least this
> time I have a reliable Adsl connection. You have two option.
> -Change adsl modem another one which support PPPoE and Bridge Mode Options
> on the same time (and together). This option is easy and preferably.
> -Choose the PPPoE mode. Make more than one virtual interfaces on the
> OpenBSD, and write your own rules for nat. If you need to further
> information about virtual interfaces, fallow below link.
> http://www.openbsd.org/faq/**faq6.html#Setup.aliases<http://www.openbsd.org/faq/faq6.html#Setup.aliases>
> ______________________________**_________________
> freebsd-pf at freebsd.org mailing list
> http://lists.freebsd.org/**mailman/listinfo/freebsd-pf<http://lists.freebsd.org/mailman/listinfo/freebsd-pf>
> To unsubscribe, send any mail to "freebsd-pf-unsubscribe@**freebsd.org<freebsd-pf-unsubscribe at freebsd.org>
> "
>