PF ruleset NAT assistance
leon at trusc.net
Thu Jan 5 11:14:19 PST 2006
I have a strange scenario that i am sure pf can cope with but i am not
sure how to write the ruleset and i cant find clarification on it.
We have a gateway freebsd box with the following interfaces
ext_if1 (internet connection 1)
ext_if1_rt (router ip connected to the ext_if1)
ext_if1_ip (the ip of ext_if1)
ext_if1_ip2 (the 2nd ip of ext_if1)
ext_if2 (internet connection 2)
ext_if2_rt (router ip connected to the ext_if2)
ext_if2_ip (the ip of ext_if2)
ext_if2_ip2 (the 2nd ip of ext_if2)
ext_if3 (internet connection 3)
ext_if3_rt (router ip connected to the ext_if3)
ext_if3_ip (the ip of ext_if3)
ext_if3_ip2 (the 2nd ip of ext_if3)
dmz_if (DMZ server interface)
dmz_srv (DMZ server ip)
dmz_if_ip (DMZ interface ip)
lan_if (lan pc network interface)# network diagram
lan_if_ip (lan interface ip)
pri_net (entire subnet of the lan pc's)
The default gateway is the router ext_if_rt.
All external interfaces need to be natted.
The second ips on the interfaces are intended for binat use which is
where the problem comes in.
I need to allow various ports in on all the ext_if's and be redirected
to the dmz server. The returning packets must then be sent back out the
same interface they arrived on.
These rules seem logical but dont seem to work (specific ports omitted)
Can anyone point out my fault?
nat on $ext_if1 from pri_net to any -> $ext_if1_ip
binat on ext_if1 from dmz_srv to any -> ext_if1_ip2
nat on $ext_if2 from pri_net to any -> $ext_if2_ip
binat on ext_if2 from dmz_srv to any -> ext_if2_ip2
nat on $ext_if3 from pri_net to any -> $ext_if3_ip
binat on ext_if3 from dmz_srv to any -> ext_if3_ip2
Can someone help me with these three binat rules plz.
More information about the freebsd-pf