[ports-i386@FreeBSD.org: p5-Coro-5.23_1,1 failed on i386 9]

Erwin Lansing erwin at FreeBSD.org
Fri Oct 29 22:09:33 UTC 2010 

FYI; can you please investigate and/or report to the developers?  If
you are already aware of this problem but do not yet have a fix,
please mark the port BROKEN in the appropriate case, so that users do
not unexpectedly encounter it.

See http://pointyhat.freebsd.org for the full log.

Thanks,
-erwin

----- Forwarded message from User Ports-i386 <ports-i386 at FreeBSD.org> -----

Date: Fri, 29 Oct 2010 21:05:35 GMT
From: User Ports-i386 <ports-i386 at FreeBSD.org>
To: erwin at FreeBSD.org, miwi at FreeBSD.org, itetcu at FreeBSD.org
Subject: p5-Coro-5.23_1,1 failed on i386 9

You can also find this build log at

  http://pointyhat.freebsd.org/errorlogs/i386-errorlogs/a.9.20101029175938/p5-Coro-5.23_1,1.log

building p5-Coro-5.23_1,1 on gohan53.freebsd.org
in directory /x/tmp/9/20101029175938/chroot/260
building for: 9.0-CURRENT i386
maintained by: perl at FreeBSD.org
port directory: /usr/ports/devel/p5-Coro
Makefile ident: $FreeBSD: ports/devel/p5-Coro/Makefile,v 1.44 2010/09/24 00:44:19 pgollucci Exp $
build started at Fri Oct 29 20:59:45 UTC 2010
FETCH_DEPENDS=
PATCH_DEPENDS=perl-5.10.1_2.tbz
EXTRACT_DEPENDS=perl-5.10.1_2.tbz
BUILD_DEPENDS=p5-AnyEvent-5.271.tbz p5-AnyEvent-AIO-1.1.tbz p5-EV-4.00,1.tbz p5-Event-1.13.tbz p5-Guard-1.021.tbz p5-IO-AIO-3.65.tbz p5-common-sense-3.3.tbz perl-5.10.1_2.tbz
RUN_DEPENDS=p5-AnyEvent-5.271.tbz p5-AnyEvent-AIO-1.1.tbz p5-EV-4.00,1.tbz p5-Event-1.13.tbz p5-Guard-1.021.tbz p5-IO-AIO-3.65.tbz p5-common-sense-3.3.tbz perl-5.10.1_2.tbz
prefixes: LOCALBASE=usr/local
add_pkg
================================================================
====================<phase 1: make checksum>====================
===>  License check disabled, port has not defined LICENSE
=> Coro-5.23.tar.gz doesn't seem to exist in /tmp/distfiles/.
=> Attempting to fetch from ftp://ftp-master.freebsd.org/pub/FreeBSD/ports/distfiles/.
Coro-5.23.tar.gz                                       150 kB  182 kBps
=> SHA256 Checksum OK for Coro-5.23.tar.gz.
================================================================
====================<phase 2: make extract>====================
add_pkg perl-5.10.1_2.tbz
adding dependencies
pkg_add perl-5.10.1_2.tbz
Removing stale symlinks from /usr/bin...
    Skipping /usr/bin/perl
    Skipping /usr/bin/perl5
Done.
Creating various symlinks in /usr/bin...
    Symlinking /usr/local/bin/perl5.10.1 to /usr/bin/perl
    Symlinking /usr/local/bin/perl5.10.1 to /usr/bin/perl5
Done.
Cleaning up /etc/make.conf... Done.
Spamming /etc/make.conf... Done.
Cleaning up /etc/manpath.config... Done.
Spamming /etc/manpath.config... Done.
===>  License check disabled, port has not defined LICENSE
===>  Extracting for p5-Coro-5.23_1,1
=> SHA256 Checksum OK for Coro-5.23.tar.gz.
===>   p5-Coro-5.23_1,1 depends on file: /usr/local/bin/perl5.10.1 - found
Deleting perl-5.10.1_2
Removing stale symlinks from /usr/bin...
    Removing /usr/bin/perl
    Removing /usr/bin/perl5
Done.
Cleaning up /etc/make.conf... Done.
Cleaning up /etc/manpath.config... Done.
================================================================
====================<phase 3: make patch>====================
add_pkg perl-5.10.1_2.tbz
adding dependencies
pkg_add perl-5.10.1_2.tbz
Removing stale symlinks from /usr/bin...
    Skipping /usr/bin/perl
    Skipping /usr/bin/perl5
Done.
Creating various symlinks in /usr/bin...
    Symlinking /usr/local/bin/perl5.10.1 to /usr/bin/perl
    Symlinking /usr/local/bin/perl5.10.1 to /usr/bin/perl5
Done.
Cleaning up /etc/make.conf... Done.
Spamming /etc/make.conf... Done.
Cleaning up /etc/manpath.config... Done.
Spamming /etc/manpath.config... Done.
===>  Patching for p5-Coro-5.23_1,1
===>   p5-Coro-5.23_1,1 depends on file: /usr/local/bin/perl5.10.1 - found
===>  Applying FreeBSD patches for p5-Coro-5.23_1,1
Deleting perl-5.10.1_2
Removing stale symlinks from /usr/bin...
    Removing /usr/bin/perl
    Removing /usr/bin/perl5
Done.
Cleaning up /etc/make.conf... Done.
Cleaning up /etc/manpath.config... Done.
================================================================
====================<phase 4: make build>====================
add_pkg p5-AnyEvent-5.271.tbz p5-AnyEvent-AIO-1.1.tbz p5-EV-4.00,1.tbz p5-Event-1.13.tbz p5-Guard-1.021.tbz p5-IO-AIO-3.65.tbz p5-common-sense-3.3.tbz perl-5.10.1_2.tbz
adding dependencies
pkg_add p5-AnyEvent-5.271.tbz
Removing stale symlinks from /usr/bin...
    Skipping /usr/bin/perl
    Skipping /usr/bin/perl5
Done.
Creating various symlinks in /usr/bin...
    Symlinking /usr/local/bin/perl5.10.1 to /usr/bin/perl
    Symlinking /usr/local/bin/perl5.10.1 to /usr/bin/perl5
Done.
Cleaning up /etc/make.conf... Done.
Spamming /etc/make.conf... Done.
Cleaning up /etc/manpath.config... Done.
Spamming /etc/manpath.config... Done.
pkg_add p5-AnyEvent-AIO-1.1.tbz
pkg_add p5-EV-4.00,1.tbz
pkg_add p5-Event-1.13.tbz
pkg_add p5-Guard-1.021.tbz
pkg_add p5-IO-AIO-3.65.tbz
pkg_add p5-common-sense-3.3.tbz
skipping p5-common-sense-3.3, already added
pkg_add perl-5.10.1_2.tbz
skipping perl-5.10.1_2, already added
===>   p5-Coro-5.23_1,1 depends on package: p5-Event>=1.08 - found
===>   p5-Coro-5.23_1,1 depends on package: p5-Guard>=0.5 - found
===>   p5-Coro-5.23_1,1 depends on package: p5-AnyEvent>=5.0 - found
===>   p5-Coro-5.23_1,1 depends on package: p5-AnyEvent-AIO>=1.0 - found
===>   p5-Coro-5.23_1,1 depends on package: p5-EV>=3.3 - found
===>   p5-Coro-5.23_1,1 depends on package: p5-common-sense>=0 - found
===>   p5-Coro-5.23_1,1 depends on package: p5-IO-AIO>=3.1 - found
===>   p5-Coro-5.23_1,1 depends on file: /usr/local/bin/perl5.10.1 - found
===>   p5-Coro-5.23_1,1 depends on file: /usr/local/bin/perl5.10.1 - found
===>  Configuring for p5-Coro-5.23_1,1
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Event version 1.13 found, building Event support.


EV version 4.00 found, building EV support.

Checking if your kit is complete...
Looks good

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** 

Coro has a number of configuration options. Due to its maturity, the
defaults that Coro chooses are usually fine, so you can decide to skip
these questions. Only if something went wrong you should select 'n'
here and manually configure Coro, and, of course, report this to the
maintainer :)

Skip further questions and use defaults (y/n)? [y] y

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** 

Coro can use a number of methods to implement coroutines at the C
level. The default chosen is based on your current confguration and is
correct in most cases, but you still can chose between these alternatives:

u  The unix 'ucontext.h' functions are relatively new and not implemented
   or well-tested in older unices. They allow very fast coroutine creation
   and reasonably fast switching.  They are, however, usually slower than
   the other alternatives due to an extra syscall done by swapcontext. And
   while nominally most portable (it's the only POSIX-standardised
   interface for coroutines), ucontext functions are, as usual, broken on
   most/all BSDs.

s  If the ucontext functions are not working or you don't want
   to use them for other reasons you can try a workaround using
   setjmp/longjmp/sigaltstack (also standard unix functions). Coroutine
   creation is rather slow, but switching is very fast (often much faster
   than with the ucontext functions). Unfortunately, glibc-2.1 and
   below don't even feature a working sigaltstack. You cannot use this
   implementation if some other code uses SIGUSR2 or you plan to create
   coroutines from an alternative signal stack, as both are being used for
   coroutine creation.

a  Handcoded assembly. This is the fastest and most compatible method,
   with the least side effects, if it works, that is. It has been tested
   on GNU/Linux x86 and x86_64 systems and should work on all x86/x86_64
   systems using the SVR ELF ABI (it is also reported to be working on
   Strawberry Perl for Windows using MinGW). This is the recommended
   method on supported platforms. When it doesn't work, use another
   method, such as (s)etjmp/longjmp.

l  GNU/Linux. Very old GNU/Linux systems (glibc-2.1 and below) need
   this hack. Since it is very linux-specific it is also quite fast and
   recommended even for newer versions; when it works, that is (currently
   x86 and a few others only. If it compiles, it's usually ok). Newer
   glibc versions (>= 2.5) stop working with this implementation however.

i  IRIX. For some reason, SGI really does not like to follow POSIX (does
   that surprise you?), so this workaround might be needed (it's fast),
   although [s] and [u] should also work now.

w  Microsoft Windows. Try this on Microsoft Windows when using Cygwin or
   the MSVC compilers (e.g. ActiveState Perl, but see "a" for Strawberry
   Perl), although, as there is no standard on how to do this under
   windows, different environments might work differently. Doh.

p  Use pthread API. Try to avoid this option, it was only created to
   make a point about the programming language shootout. It is unlikely
   to work with perls that have windows process emulation enabled ("perl
   threads"). It is also likely the slowest method of implementing
   coroutines. It might work fine as a last resort, however, as the
   pthread API is slightly better tested than ucontext functions for
   example. Of course, not on BSDs, who usually have very broken pthread
   implementations.

Coro tries hard to come up with a suitable default for most systems,
so pressing return at the prompt usually does the right thing. If you
experience problems (e.g. make test fails) then you should experiment with
this setting.

Use which implementation,
<s>etjmp, <u>ctx, <a>sm, <i>rix, <l>inux, <w>indows or <p>threads? [a] a

Using handcoded assembler implementation


*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** 

Per-context stack size factor: Depending on your settings, Coro tries to
share the C stacks is creates as much as possible, but sometimes it needs
to allocate a new one. This setting controls the maximum size that gets
allocated, and should not be set too high, as memory and address space
still is wasted even if it's not fully used. The value entered will be
multiplied by sizeof(long), which is usually 4 on 32-bit systems, and 8 on
64-bit systems.

A setting of 16384 (the default) therefore corresponds to a 64k..128k
stack, which usually is ample space (you might even want to try 8192 or
lower if your program creates many coroutines).

On systems supporting mmap and dynamic memory management, the actual
memory usually gets allocated on demand, but with many large stacks you
can still run out of address space on your typical 32 bit platform (not to
forget the pagetables).

Some perls (mostly threaded ones and perl compiled under linux 2.6) and
some programs (inefficient regexes can use a lot of stack space) may
need much, much more: If Coro segfaults with weird backtraces (e.g. in a
function prologue) or in t/10_bugs.t, you might want to increase this to
65536 or more.

The default should be fine, and can be changed at runtime with
Coro::State::cctx_stacksize.

C stack size factor? [16384] 16384
using a stacksize of 16384 * sizeof(long)

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** 

Coro can optionally put a guard area before each stack segment: When the
stack is too small and the access is not too far outside the stack (i.e.
within the guard area), then the program will safely segfault instead of
running into other data. The cost is some additional overhead with is
usually negligible, and extra use of address space.

The guard area size currently needs to be specified in pages (typical
pagesizes are 4k and 8k). The guard area is only enabled on a few
hardcoded architectures and is ignored on others. The actual preprocessor
expression disables this feature if:

   !__i386 && !__x86_64 && !__powerpc && !__m68k 
   && !__alpha && !__mips && !__sparc64

The default, as usual, should be just fine.

Number of guard pages (0 disables)? [4] 4

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** 

Coro can tell valgrind about its stacks and so reduce spurious warnings
where valgrind would otherwise complain about possible stack switches.

Enabling this does not incur noticable runtime or memory overhead, but it
requires that you have the <valgrind/valgrind.h> header file available.

Valgrind support is completely optional, so disabling it is the safe
choice.

Enable valgrind support (y/n)? [n] n

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** 

Coro can use (or even trick) some perl functions into doing what it needs
instead of relying on (some) of its own functions. This might increase
chances that it compiles and works, but it could just as well result in
memory leaks, crashes or silent data corruption. It certainly does result
in slightly slower speed and higher memory consumption, though, so YOU
SHOULD ENABLE THIS OPTION ONLY AS A LAST RESORT.

Prefer perl functions over coro functions (y/n)? [n] n

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** 

Coro has experimental support for cloning states. This can be used
to implement a scheme-like call/cc. However, this doesn't add to the
expressiveness in general, and is likely perl-version specific (and perl
5.12 deliberately removed support for it). As such, it is disabled by
default.  Enable it when you want to play around with it, but note that it
isn't supported, and unlikely ever will be. It exists mainly to prove that
it could be done - if only it were useful for something.

Implement Coro::State->clone method (y/n)? [n] n

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** 

Writing Makefile for Coro::State
Writing Makefile for Coro::Event
Writing Makefile for Coro::EV
Writing Makefile for Coro
===>  Building for p5-Coro-5.23_1,1
cp Coro/Select.pm blib/lib/Coro/Select.pm
cp Coro/State.pm blib/lib/Coro/State.pm
cp Coro/Debug.pm blib/lib/Coro/Debug.pm
cp Coro/RWLock.pm blib/lib/Coro/RWLock.pm
cp Coro/LWP.pm blib/lib/Coro/LWP.pm
cp Coro/Semaphore.pm blib/lib/Coro/Semaphore.pm
cp Coro/Timer.pm blib/lib/Coro/Timer.pm
cp Coro/CoroAPI.h blib/lib/Coro/CoroAPI.h
cp Coro.pm blib/lib/Coro.pm
cp Coro/Signal.pm blib/lib/Coro/Signal.pm
cp Coro/AnyEvent.pm blib/lib/Coro/AnyEvent.pm
cp Coro/BDB.pm blib/lib/Coro/BDB.pm
cp Coro/SemaphoreSet.pm blib/lib/Coro/SemaphoreSet.pm
cp Coro/Storable.pm blib/lib/Coro/Storable.pm
cp Coro/Util.pm blib/lib/Coro/Util.pm
cp Coro/AIO.pm blib/lib/Coro/AIO.pm
cp Coro/Handle.pm blib/lib/Coro/Handle.pm
cp Coro/Specific.pm blib/lib/Coro/Specific.pm
cp Coro/Socket.pm blib/lib/Coro/Socket.pm
cp Coro/Channel.pm blib/lib/Coro/Channel.pm
cp Coro/MakeMaker.pm blib/lib/Coro/MakeMaker.pm
Skip ../blib/lib/Coro/Channel.pm (unchanged)
Skip ../blib/lib/Coro/Util.pm (unchanged)
Skip ../blib/lib/Coro/Specific.pm (unchanged)
Skip ../blib/lib/Coro/BDB.pm (unchanged)
Skip ../blib/lib/Coro/AnyEvent.pm (unchanged)
Skip ../blib/lib/Coro/LWP.pm (unchanged)
Skip ../blib/lib/Coro/SemaphoreSet.pm (unchanged)
Skip ../blib/lib/Coro/MakeMaker.pm (unchanged)
Skip ../blib/lib/Coro/Semaphore.pm (unchanged)
Skip ../blib/lib/Coro/Timer.pm (unchanged)
Skip ../blib/lib/Coro/AIO.pm (unchanged)
Skip ../blib/lib/Coro/Debug.pm (unchanged)
Skip ../blib/lib/Coro/Socket.pm (unchanged)
Skip ../blib/lib/Coro/State.pm (unchanged)
Skip ../blib/lib/Coro/RWLock.pm (unchanged)
Skip ../blib/lib/Coro/Signal.pm (unchanged)
cp Intro.pod ../blib/lib/Coro/Intro.pod
Skip ../blib/lib/Coro/Handle.pm (unchanged)
Skip ../blib/lib/Coro/Storable.pm (unchanged)
Skip ../blib/lib/Coro/Select.pm (unchanged)
/usr/local/bin/perl5.10.1 /usr/local/lib/perl5/5.10.1/ExtUtils/xsubpp  -typemap /usr/local/lib/perl5/5.10.1/ExtUtils/typemap -typemap typemap  State.xs > State.xsc && mv State.xsc State.c
cc -c    -DAPPLLIB_EXP="/usr/local/lib/perl5/5.10.1/BSDPAN" -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -O2 -pipe -fno-strict-aliasing    -DVERSION=\"5.23\"  -DXS_VERSION=\"5.23\" -DPIC -fPIC "-I/usr/local/lib/perl5/5.10.1/mach/CORE"  -DHAVE_MMAP -DCORO_ASM -DCORO_STACKSIZE=16384 -DCORO_STACKGUARD=4 State.c
State.xs: In function 'boot_Coro__State':
State.xs:3458: warning: cast from pointer to integer of different size
Running Mkbootstrap for Coro::State ()
chmod 644 State.bs
rm -f ../blib/arch/auto/Coro/State/State.so
cc  -shared  -L/usr/local/lib -fstack-protector State.o  -o ../blib/arch/auto/Coro/State/State.so 	    	 
chmod 755 ../blib/arch/auto/Coro/State/State.so
cp State.bs ../blib/arch/auto/Coro/State/State.bs
chmod 644 ../blib/arch/auto/Coro/State/State.bs
Manifying ../blib/man3/Coro::Util.3
Manifying ../blib/man3/Coro::Channel.3
Manifying ../blib/man3/Coro::Specific.3
Manifying ../blib/man3/Coro::BDB.3
Manifying ../blib/man3/Coro::LWP.3
Manifying ../blib/man3/Coro::AnyEvent.3
Manifying ../blib/man3/Coro::SemaphoreSet.3
Manifying ../blib/man3/Coro::MakeMaker.3
Manifying ../blib/man3/Coro::Semaphore.3
Manifying ../blib/man3/Coro::Timer.3
Manifying ../blib/man3/Coro::AIO.3
Manifying ../blib/man3/Coro::Debug.3
Manifying ../blib/man3/Coro::Socket.3
Manifying ../blib/man3/Coro::State.3
Manifying ../blib/man3/Coro::RWLock.3
Manifying ../blib/man3/Coro::Signal.3
Manifying ../blib/man3/Coro::Intro.3
Manifying ../blib/man3/Coro::Handle.3
Manifying ../blib/man3/Coro::Select.3
Manifying ../blib/man3/Coro::Storable.3
cp Event.pm ../blib/lib/Coro/Event.pm
/usr/local/bin/perl5.10.1 /usr/local/lib/perl5/5.10.1/ExtUtils/xsubpp  -typemap /usr/local/lib/perl5/5.10.1/ExtUtils/typemap  Event.xs > Event.xsc && mv Event.xsc Event.c
cc -c  -I/usr/local/lib/perl5/site_perl/5.10.1/mach/Event  -DAPPLLIB_EXP="/usr/local/lib/perl5/5.10.1/BSDPAN" -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -O2 -pipe -fno-strict-aliasing    -DVERSION=\"5.23\"  -DXS_VERSION=\"5.23\" -DPIC -fPIC "-I/usr/local/lib/perl5/5.10.1/mach/CORE"  -DHAVE_EVENT=1 -DHAVE_EV=1 Event.c
Event.xs: In function 'boot_Coro__Event':
Event.xs:82: warning: cast to pointer from integer of different size
Event.xs:83: warning: cast to pointer from integer of different size
Running Mkbootstrap for Coro::Event ()
chmod 644 Event.bs
rm -f ../blib/arch/auto/Coro/Event/Event.so
cc  -shared  -L/usr/local/lib -fstack-protector Event.o  -o ../blib/arch/auto/Coro/Event/Event.so 	    	 
chmod 755 ../blib/arch/auto/Coro/Event/Event.so
cp Event.bs ../blib/arch/auto/Coro/Event/Event.bs
chmod 644 ../blib/arch/auto/Coro/Event/Event.bs
Manifying ../blib/man3/Coro::Event.3
cp EV.pm ../blib/lib/Coro/EV.pm
/usr/local/bin/perl5.10.1 /usr/local/lib/perl5/5.10.1/ExtUtils/xsubpp  -typemap /usr/local/lib/perl5/5.10.1/ExtUtils/typemap  EV.xs > EV.xsc && mv EV.xsc EV.c
cc -c  -I/usr/local/lib/perl5/site_perl/5.10.1/mach/EV -I/usr/local/lib/perl5/site_perl/5.10.1/mach  -DAPPLLIB_EXP="/usr/local/lib/perl5/5.10.1/BSDPAN" -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -O2 -pipe -fno-strict-aliasing    -DVERSION=\"5.23\"  -DXS_VERSION=\"5.23\" -DPIC -fPIC "-I/usr/local/lib/perl5/5.10.1/mach/CORE"  -DHAVE_EVENT=1 -DHAVE_EV=1 EV.c
EV.xs: In function 'XS_Coro__EV__loop_oneshot':
EV.xs:327: error: 'EVLOOP_ONESHOT' undeclared (first use in this function)
EV.xs:327: error: (Each undeclared identifier is reported only once
EV.xs:327: error: for each function it appears in.)
EV.xs: In function 'boot_Coro__EV':
EV.xs:287: warning: cast to pointer from integer of different size
EV.xs:288: warning: cast to pointer from integer of different size
*** Error code 1

Stop in /work/a/ports/devel/p5-Coro/work/Coro-5.23/EV.
*** Error code 1

Stop in /work/a/ports/devel/p5-Coro/work/Coro-5.23.
*** Error code 1

Stop in /a/ports/devel/p5-Coro.
================================================================
build of /usr/ports/devel/p5-Coro ended at Fri Oct 29 21:05:29 UTC 2010

!DSPAM:4ccb3732230291675514410!


----- End forwarded message -----
-- 
Erwin Lansing                                   http://droso.org
Prediction is very difficult
especially about the future                    erwin at FreeBSD.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 188 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-perl/attachments/20101029/7e19ac24/attachment.pgp

More information about the freebsd-perl mailing list